Updated SCSI Network Card (markdown)

akuker 2021-08-09 11:42:43 -05:00
parent f52b7540fb
commit 5a8c8bc388
1 changed files with 0 additions and 58 deletions

@ -32,64 +32,6 @@ sudo apt-get install iputils-arping tcpdump
```
# Setup the tun/tap interface
Notice that the IP address is **hardcoded** for now. If this doesn't suits you, please update `devices/ctapdriver.cpp:83`
```
sudo ip tuntap add ras0 mode tap user root
sudo ip link set ras0 up
sudo ifconfig ras0 inet 192.168.0.1/8 up
sudo route add -net 192.168.0.1 netmask 255.255.255.0 dev ras0
```
## make sure that wlan0 is your internet network interface
```
sudo echo 1 >/proc/sys/net/ipv4/ip_forward
sudo iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE
```
# Setting up RaSCSI with SCSI Ethernet support
## Checkout the code
You will need to clone the repository, and the switch to the daynaport or nuvolink branch.
```
git checkout daynaport
git pull
```
## Stop any RaSCSI running instance
sudo systemctl stop rascsi
## Compile with debug mode enabled
go to the source folder
```
cd ~/RASCSI/src/raspberry
make clean
make all CONNECT_TYPE=FULLSPEC DEBUG=1
sudo make install CONNECT_TYPE=FULLSPEC DEBUG=1
```
### Start the new version
```
sudo systemctl start rascsi
sudo systemctl status rascsi
```
### attach the NuvoLink or DaynaPort virtual card to RASCSI
```
rasctl -c attach -i 4 -t nuvolink
# or
rasctl -c attach -i 4 -t daynaport
```
# Install NuvoLink or DaynaPort Driver
On the Macintosh you will need to install either the NuvoLink or Daynaport driver:
- [NuvoLink Drivers](https://macintoshgarden.org/apps/nuvolink)
- [DaynaPort Drivers](https://macintoshgarden.org/apps/daynaport-drivers)
- [DaynaPort ISO Disk Image (works with RaSCSI)](http://www.bitsavers.org/pdf/apple/scsi/dayna/daynaPORT/)
- [Both are available here](https://vintageapple.org/macdrivers/network.shtml)
# Debugging
## check the logs
```