diff --git a/SCSI-Bus-Capture.md b/SCSI-Bus-Capture.md
index 9fb1768..aeac7f2 100644
--- a/SCSI-Bus-Capture.md
+++ b/SCSI-Bus-Capture.md
@@ -1,31 +1,35 @@
-This page is intended for developers only. Its no use to anyone else.
+This page is intended for developers and/or advanced users only.
+
+# What is scsimon?
+The scsimon tool allows you to capture all of the traffic on the SCSI bus and log it to a file. The data is stored in a "Value Change Data" VCD file that can be read by GTKWave
+```
++---------+    +-----------+    +----------+
+|         |    |  RaSCSI   |    | Other    |
+|  HOST   |    |  running  |    | SCSI     |
+|   PC    |    |  scsimon  |    | device(s)|
+|         |    |           |    |          |
++-+-------+    +--+-----+--+    +------+---+
+  |               |     |              |
+  +---------------+     +--------------+
+    SCSI Bus              SCSI Bus
+```
 
 # Checkout and build scsimon
-Right now, scsimon isn't included in the master branch. When [#7](/akuker/RASCSI/issues/7) is fixed, this page should be updated. I'm assuming scsimon will be merged into master before that issue is closed.
 
-```
-cd ~
-git clone https://github.com/akuker/RASCSI.git
-cd ~/RASCSI
-git checkout scsimon
-cd ~/RASCSI/src/raspberrypi/
-# If this is a new Raspberry Pi OS install, you'll need to run this command:
-sudo apt install libspdlog-dev
-make all
-```
+scsimon is included in the main installation of RaSCSI. It should be located in `/usr/local/bin/scsimon`. If its not, you may need to upgrade to a newer version of the RaSCSI software.
+
 ## Special RaSCSI 1.5/1.6 modification
+If you're using a RaSCSI 2.x board ("FULLSPEC"), you do not need this modification!
 
 If you're using a RaSCSI version 1.5 or 1.6, you will need to make the following modification to your board. This will force all of the transceivers into a RECEIVE-ONLY mode.
 
 <a href="./images/scsimon_mods.png"><img src="./images/scsimon_mods.png" width="400"/></a>
 
-Note: This tool hasn't been tested with RaSCSI board version 2.x.
-
 # Capture data
 
+Make sure you've stopped the RaSCSI service. Then run scsimon. If you're trying to capture a specific scenario, you'll want to wait to start scsimon until immediately before the scenario. 
 ```
-# TODO: I need to rename the executable to scsimon
-sudo ./scsishark
+sudo ./scsimon
 ```
 Press CTRL-C when you're done capturing. You'll want to save the .VCD file.