From dd9ae887c1eb71a01b59ae7c2b5e57f5679d1ab5 Mon Sep 17 00:00:00 2001
From: akuker <34318535+akuker@users.noreply.github.com>
Date: Fri, 7 Jan 2022 19:27:00 -0600
Subject: [PATCH] Updated Dayna Port Command Set (markdown)

---
 Dayna-Port-Command-Set.md | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Dayna-Port-Command-Set.md b/Dayna-Port-Command-Set.md
index 88a6eac..89fdaa7 100644
--- a/Dayna-Port-Command-Set.md
+++ b/Dayna-Port-Command-Set.md
@@ -33,10 +33,10 @@ The following is a partial list of implemented SCSI commands:
 
 A number of other SCSI commands are implemented, but their usage is not yet fully known.
 
-## Unknown Startup Command (0d)
+## Multicast Enable Command (0d)
 Command:  0d 00 00 00 06 00
 
-Function: ***Unknown at this time***
+Function: Configures the DaynaPort SCSI/Link to accept/reject multicast address.
 
 Type:     Input (Transitions to DATAOUT)
 
@@ -44,7 +44,7 @@ Host then sends: `00 09 00 07 FF FF FF 00` (The last 00 might not actually be th
 
 Note: The AppleTalk broadcast address is 09:00:07:ff:ff:ff.
 
-This is probably configuring the Multicast Address Registers of the [DP83902A Ethernet receiver](./docs/DP83902A.pdf) inside the DaynaPort SCSI Link
+This is configuring the Multicast Address Registers of the [DP83902A Ethernet receiver](./docs/DP83902A.pdf) inside the DaynaPort SCSI Link
 
     10.9 MULTICAST ADDRESS REGISTERS (MAR0 –MAR7)