mirror of
https://github.com/alxlab-zone66x/Reference_Design_Library.git
synced 2024-06-14 22:29:28 +00:00
59 lines
3.5 KiB
Markdown
59 lines
3.5 KiB
Markdown
|
[Reference Design Library](https://github.com/alxlab-zone66x/Reference_Design_Library)
|
||
|
|
||
|
<img style="width: 50%;" src="docs/macintosh_portable_ram_expansion_card_design_guide.png" alt="Mac DB15 to VGA v 1.0" /><img style="width: 50%;" src="docs/macintosh_portable_ram_expansion_card_pcb.png" alt="Mac DB15 to VGA v 1.0" />
|
||
|
|
||
|
# Macintosh Portable RAM Expansion Card
|
||
|
|
||
|
This is the Kicad 6 schematics and PCB with connector to serve as the basis to make a Macintosh Portable RAM expansion card. The PCB was designed based off the dimensions shown on page 450 of the [Designing Cards and Drivers for -the Macintosh Family Third Edition](../docs/books/Designing_Cards_and_Drivers_for_the_Macintosh_Family_3rd_Edition_1992.pdf#page=491). I made two versions of the board with different connectors. One uses the original AMPMODU Mod II / Mod IV connector and the other uses a cheaper and easier to get female right-angle 50-pin connector.
|
||
|
|
||
|
Note that the schematic symbol for the connector notes the pins names for the M5120 non-backlit Macintosh Portable. For M5126 backlit Macintosh Portable pins 28 and 32 are defined as /RAM.CS and /REFRESH instead of /AS and /DELAY.CS respectively.
|
||
|
|
||
|
|
||
|
|
||
|
## Bill of Materials
|
||
|
|
||
|
AMPMODU Mod II / Mod IV connector version:
|
||
|
|
||
|
| Image | Quantity | Product Number | Datasheet |
|
||
|
| ------------------------------------------------------------ | :------- | ------------------------------------------- | ------------------------------------------------------------ |
|
||
|
| <img style="width: 10rem;" src="docs/534204-1.webp" alt="50-pin AMPMODU connector" /> | 1 | 66527-025LF<br />5-532956-8<br />5-534204-1 | [pdf](docs/datasheets/J1_66527.pdf)<br />[pdf](docs/datasheets/J1_ENG_CD_532956_AF3.pdf)<br />[pdf](docs/datasheets/J1_ENG_CD_532956_AF3.pdf) |
|
||
|
|
||
|
Right-angle connector version:
|
||
|
|
||
|
| | Quantity | Product Number | Datasheet |
|
||
|
| ------------------------------------------------------------ | :------- | -------------- | ----------------------------------------------- |
|
||
|
| <img style="width: 10rem;" src="docs/PPPC252LJBN-RC.webp" alt="50-pin AMPMODU connector" /> | 1 | PPPC252LJBN-RC | [pdf](docs/datasheets/J1_Right-Angle_10494.pdf) |
|
||
|
|
||
|
|
||
|
|
||
|
## License
|
||
|
|
||
|
<a rel="license" href="http://creativecommons.org/licenses/by/4.0/"><img alt="Creative Commons License" style="border-width:0" src="https://i.creativecommons.org/l/by/4.0/88x31.png" /></a>
|
||
|
|
||
|
<span xmlns:dct="http://purl.org/dc/terms/" property="dct:title">Connector Shield for Macintosh II-Family Computer</span> by <a xmlns:cc="http://creativecommons.org/ns#" href="https://github.com/alxlab-zone66x/Reference_Design_Library/tree/main/Connector%20Shield%20for%20Macintosh%20II-Family%20Computer" property="cc:attributionName" rel="cc:attributionURL">Alexandre Marcoux</a> is licensed under a <a rel="license" href="http://creativecommons.org/licenses/by/4.0/">Creative Commons Attribution 4.0 International License</a>.
|
||
|
|
||
|
|
||
|
|
||
|
## Community
|
||
|
|
||
|
For more great retro hardware projects and a great community check out:
|
||
|
|
||
|
[<img src="../docs/tinker_different_sat_rev_600.png" alt="Tinker Different" style="float: left;" />](https://tinkerdifferent.com/)
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
Join us in #skunkworks on [Discord](https://discord.gg/GKcvtgU7P9) to help make retro solutions available to all.
|
||
|
|
||
|
[<img src="../docs/discordbanner.png" alt="Discord Open Retro SCSI skunkworks" style="float: left;" />](https://discord.gg/GKcvtgU7P9)
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|