This card shield is used on NuBus and PDS cards of many Macintosh models. The 3D model is based off the dimensions shown in [Designing Cards and Drivers for -the Macintosh Family Third Edition](docs/Connector%20Shield%20for%20Macintosh%20II-Family%20Computer_specs.png). The bracket model has no holes and is meant to be modified for whatever suits your needs. It supposed to use M3 screws like the original brackets. You can tap the bracket with a M3 screw or tap.
The wall thickness is set to 0.8mm like the metal brackets. It's recommended to print the bracket with 100% infill. The bracket needs to be printed with supports enabled.
<spanxmlns:dct="http://purl.org/dc/terms/"property="dct:title">Connector Shield for Macintosh II-Family Computer</span> by <axmlns:cc="http://creativecommons.org/ns#"href="https://github.com/alxlab-zone66x/Reference_Design_Library/tree/main/Connector%20Shield%20for%20Macintosh%20II-Family%20Computer"property="cc:attributionName"rel="cc:attributionURL">Alexandre Marcoux</a> is licensed under a <arel="license"href="http://creativecommons.org/licenses/by/4.0/">Creative Commons Attribution 4.0 International License</a>.