mirror of
https://github.com/fhgwright/SCSI2SD.git
synced 2024-10-19 02:25:05 +00:00
71 lines
2.2 KiB
Plaintext
71 lines
2.2 KiB
Plaintext
SCSI2SD, The SCSI Hard Drive Emulator for retro computing.
|
|
|
|
Traditional hard drives last 5 years*. Maybe, if you're luckly, you'll get 10
|
|
years of service from a particular drive. The lubricants wear out, the spindles
|
|
rust. SCSI2SD is a modern replacement for failed drives. It allows the use of
|
|
vintage computer hardware long after their mechanical drives fail. The use of
|
|
SD memory cards solves the problem of transferring data between the vintage
|
|
computer and a modern PC (who still has access to a working floppy drive ?)
|
|
|
|
*All statistics are made up.
|
|
|
|
|
|
Features
|
|
|
|
In-built active terminator.
|
|
Can optional supply terminator power back to the SCSI bus
|
|
Emulates a non-removable hard drive for maximum compatibility.
|
|
Supports sector sizes from 64 bytes to 2048 bytes
|
|
Firmware updatable over USB
|
|
Highly configurable over USB
|
|
Selectable SCSI ID
|
|
Selectable parity support
|
|
Enable/disable Unit Attention Condition
|
|
Artificial limits on the SCSI disk size (eg. limit size to 4G to avoid OS bugs)
|
|
Sector size (can also be set via the SCSI MODE SELECT command, as sent by SCSI format utilities).
|
|
|
|
|
|
Technical Specifications
|
|
|
|
SCSI Interface
|
|
SCSI-2 Narrow 8-bit 50-pin connector. Supports asynchronous transfers only.
|
|
SD Card Interface
|
|
Standard SDSC (1GB maximum size)
|
|
SDHC (32GB maximum size)
|
|
SDXC cards are untested. Donations welcome.
|
|
Communication is via the SPI protocol at 25MHz.
|
|
Power
|
|
5V via standard molex drive connector.
|
|
Dimensions
|
|
10cm x 10cm x 1.5cm
|
|
A 3D-printable bracket is in testing to suit a standard 3.5" hard disk bay.
|
|
|
|
|
|
Performance
|
|
|
|
As currently implemented:
|
|
|
|
Sequential read: 930kb/sec Sequential write: 900kb/sec
|
|
|
|
Tested with a 16GB class 10 SD card, via the commands:
|
|
|
|
# WRITE TEST
|
|
sudo dd bs=8192 count=100 if=/dev/zero of=/dev/sdX oflag=dsync
|
|
|
|
# READ TEST
|
|
sudo dd bs=8192 count=100 if=/dev/sdX of=/dev/null
|
|
|
|
Compatibility
|
|
|
|
Tested with Linux (current), Apple Macintosh System 7.5.3 on LC-III, and LC-475 hardware.
|
|
|
|
Users have reported success on these systems:
|
|
|
|
Mac II running System 6.0.8
|
|
Mac SE/30
|
|
Roland JS-30 Sampler
|
|
Akai S1000, S3200, S3000XL, MPC 2000XL, DPS 12
|
|
EMU Emulator E4X with EOS 3.00b and E6400 (classic) with Eos 4.01
|
|
Ensoniq ASR-X
|
|
HP 16601A logic analyzer
|