mirror of
https://github.com/fhgwright/SCSI2SD.git
synced 2024-12-29 11:31:00 +00:00
5e0f1e3360
Renamed "pbook" firmware to "v4". Original "green" boards now under "v3". Add external LED support for v4 firmware. Added --reset to scsi2sd-config bootloaderhost can now reset the board.
57 lines
2.2 KiB
Plaintext
57 lines
2.2 KiB
Plaintext
20140713 3.5
|
|
- Fixed several performance issues. Transfer rates up to 2.5MB/s are now
|
|
possible.
|
|
- Implemented the READ BUFFER scsi command for performance testing purposes.
|
|
- Added support for the new "yellow" v4.2 revision boards.
|
|
- Improved firmware uploading. bootloaderhost can now reset the board back
|
|
to the bootloader.
|
|
- Display firmware version in scsi2sd-config
|
|
- Add "--reset" parameter to scsi2sd-config
|
|
|
|
20140418 3.4
|
|
- Critical fix for writes when using non-standard block sizes.
|
|
- Fix to ensure SCSI phase bits are set atomically.
|
|
- Always return the requested number of bytes for a REQUEST SENSE command
|
|
This is required to support the Ensoniq ASR-10.
|
|
- Decreased (unused) heap and stack sizes to prepare for a memory
|
|
write cache
|
|
- Increased the maximum sector size to 8192 bytes.
|
|
|
|
20140416 3.3
|
|
- Fix to SCSI Reset handling to avoid lockups
|
|
- Bug fixes to improve standards compatibility
|
|
- Bug fix for Unit Attention Condition, which is now enabled by default.
|
|
scsi2sd-config can be used to disable it for those systems that
|
|
truely require it (eg. Mac Plus).
|
|
- Added Linked commands support.
|
|
- Added support for configurable sector sizes between 64 and 2048 bytes.
|
|
The sector size can be set via the MODE SELECT command using a SCSI
|
|
format utility, or via scsi2sd-config
|
|
- Powerbook firmware added
|
|
|
|
20140214 3.2
|
|
- Remove hacks around ATN handling, and implement proper select-with-atn
|
|
support. This fix is essential for communicating with some SCSI hosts.
|
|
All SCSI2SD users are urged to upgrade to this firmware version.
|
|
- More fixes to support Apple HD SC Setup (thanks to Doug Brown!)
|
|
- Fixes to support SCSI1 initiators
|
|
* Support non-arbitrating initiators.
|
|
* Support single-initiator option.
|
|
* Set CCS response format flag in INQUIRY response.
|
|
|
|
20131227 3.1
|
|
- Fixes for better SCSI reset handling
|
|
- Fix for reading the last sector of the SD card.
|
|
- Performance improvements. 2.5x read, 2x write performance.
|
|
|
|
20131209 3.0.1
|
|
- Bugfix release.
|
|
- Fixes to support formatting with Apple HD SC Setup. This is very slow,
|
|
Apple Drive Setup is preferred
|
|
- Reliability improvement for rejecting unknown SCSI messages.
|
|
- Reliability improvements for SD card initialisation and reading.
|
|
|
|
|
|
20131027 3.0
|
|
- Initial public release.
|