mirror of
https://github.com/fhgwright/SCSI2SD.git
synced 2024-12-31 23:31:20 +00:00
108 lines
3.8 KiB
Plaintext
108 lines
3.8 KiB
Plaintext
SCSI2SD, The SCSI Hard Drive Emulator for retro computing.
|
|
|
|
Traditional hard drives last 5 years*. Maybe, if you're luckly, you'll get 10
|
|
years of service from a particular drive. The lubricants wear out, the spindles
|
|
rust. SCSI2SD is a modern replacement for failed drives. It allows the use of
|
|
vintage computer hardware long after their mechanical drives fail. The use of
|
|
SD memory cards solves the problem of transferring data between the vintage
|
|
computer and a modern PC (who still has access to a working floppy drive ?)
|
|
|
|
*All statistics are made up.
|
|
|
|
|
|
Features
|
|
|
|
In-built active terminator.
|
|
Can optional supply terminator power back to the SCSI bus
|
|
Emulates up to 4 SCSI devices
|
|
Supports sector sizes from 64 bytes to 8192 bytes
|
|
Firmware updatable over USB
|
|
Highly configurable over USB
|
|
Selectable SCSI ID
|
|
Selectable parity support
|
|
Enable/disable Unit Attention Condition
|
|
Artificial limits on the SCSI disk size (eg. limit size to 4G to avoid OS bugs)
|
|
Sector size (can also be set via the SCSI MODE SELECT command, as sent by SCSI format utilities).
|
|
|
|
|
|
Technical Specifications
|
|
|
|
SCSI Interface
|
|
SCSI-2 Narrow 8-bit 50-pin connector. Supports asynchronous transfers only.
|
|
SD Card Interface
|
|
Standard SDSC (1GB maximum size)
|
|
SDHC, SDXC
|
|
Communication is via the SPI protocol at 25MHz.
|
|
Power
|
|
5V via standard molex drive connector.
|
|
Dimensions
|
|
10cm x 10cm x 1.5cm
|
|
Mounting holes to suit standard 2.5" - 3.5" drive bracket.
|
|
|
|
|
|
Performance
|
|
|
|
As currently implemented:
|
|
|
|
Transfer size: 512 2048 8192 65536
|
|
-------------------------------------------------------
|
|
read: 2MB/s 2.1MB/s 2.5MB/s 2.6MB/s
|
|
write: 125kB/s 441kB/s 1.5MB/s 2.3MB/s
|
|
-------------------------------------------------------
|
|
|
|
|
|
Tested with a 16GB class 10 SD card, via the commands:
|
|
|
|
# WRITE TEST
|
|
sudo dd bs=${SIZE} count=100 if=/dev/zero of=/dev/sdX oflag=dsync
|
|
|
|
# READ TEST
|
|
sudo dd bs=${SIZE} count=100 if=/dev/sdX of=/dev/null
|
|
|
|
Compatibility
|
|
Computer systems
|
|
|
|
Mac LC-III and LC-475
|
|
Mac II running System 6.0.8
|
|
Mac SE/30
|
|
Apple IIgs using Apple II High Speed SCSI controller card (from v3.3)
|
|
Symbolics Lisp Machine XL1200, using 1280 byte sectors (from v3.4)
|
|
PDP-11/73 running RSX11M+ V4.6
|
|
Microvax 3100 Model 80 running VMS 7.3 (needs patch against v3.5.2 firmware)
|
|
Amiga 500+ with GVP A530
|
|
Atari TT030 System V
|
|
Atari MEGA STE
|
|
needs J3 TERMPWR jumper
|
|
1GB limit (--blocks=2048000)
|
|
Sharp X68000
|
|
SASI models supported. See gamesx.com for information on building a custom cable.
|
|
needs J3 TERMPWR jumper
|
|
Set to SCSI ID 3. ID0 will not work.
|
|
Compaq XP-1000 Professional Workstation
|
|
Alpha 21264 CPU, 667MHz, with a QLogic SCSI controller in a PCI slot
|
|
SCSI-based Macintosh Powerbooks (2.5" SCSI2SD)
|
|
Also reported to work on Thinkpad 860 running Win NT 4.0 PowerPC.
|
|
|
|
Samplers
|
|
|
|
Roland JS-30 Sampler
|
|
Akai S1000, S3200, S3000XL, MPC 2000XL, DPS 12
|
|
SCSI cable reversed on S3200
|
|
There are compatibility problems with the Akai MPC3000. It works (slowly) with the alternate Vailixi OS with multi-sector transfers disabled.
|
|
EMU Emulator E4X with EOS 3.00b and E6400 (classic) with Eos 4.01
|
|
Ensoniq ASR-X, ASR-10 (from v3.4, 2GB size limit)
|
|
ASR-20 Requires TERMPWR jumper.
|
|
ASR-X resets when writing to devices > 2Gb.
|
|
Kurzweil K2000R
|
|
See kurzweil.com for size limits which a dependant on the OS version. Older OS versions have a 1GB limit.
|
|
SCSI cable reversed
|
|
Casio FZ-20M
|
|
Requires TERMPWR jumper. The manual shows the pin25 of the DB25 connector is "not connected".
|
|
May require scsi2sd-config --apple flag
|
|
Yamaha A5000, A3000, EX5, EX5R
|
|
|
|
Other
|
|
|
|
HP 16601A, 16700A logic analyzers
|
|
Fluke 9100 series
|