mirror of
https://github.com/techav-homebrew/SE-VGA.git
synced 2025-02-11 04:30:58 +00:00
76 lines
2.6 KiB
Systemverilog
76 lines
2.6 KiB
Systemverilog
/******************************************************************************
|
|
* SE-VGA
|
|
* VGA Output Test
|
|
* techav
|
|
* 2021-05-14
|
|
******************************************************************************
|
|
* Test configuration for testily testing testy test hardware.
|
|
* This is not a part of the actual configuration. It is a separate top-level
|
|
* entity for testing modules and hardware. Outputs a 512x342 pixel window of
|
|
* alternating black and white pixels in a 640x480 resolution screen.
|
|
*****************************************************************************/
|
|
|
|
// all the same I's and O's as our proper configuration
|
|
module vgatest (
|
|
input wire nReset, // System reset signal
|
|
input wire pixClk, // 25.175MHz pixel clock
|
|
output wire nhSync, // HSync signal
|
|
output wire nvSync, // VSync signal
|
|
output wire vidOut, // 1-bit Monochrome video signal
|
|
|
|
output logic [14:0] vramAddr, // VRAM Address bus
|
|
//inout logic [7:0] vramData, // VRAM Data bus
|
|
input logic [7:0] vramData,
|
|
output wire nvramOE, // VRAM Read strobe
|
|
output wire nvramWE, // VRAM Write strobe
|
|
output wire nvramCE0, // VRAM Main chip select signal
|
|
output wire nvramCE1, // VRAM Alt chip select signal
|
|
|
|
input logic [23:1] cpuAddr, // CPU Address bus
|
|
//input logic [15:0] cpuData, // CPU Data bus
|
|
output logic [15:0] cpuData,
|
|
input wire ncpuAS, // CPU Address Strobe signal
|
|
input wire ncpuUDS, // CPU Upper Data Strobe signal
|
|
input wire ncpuLDS, // CPU Lower Data Strobe signal
|
|
input wire cpuRnW, // CPU Read/Write select signal
|
|
input logic [2:0] ramSize // Select installed RAM size
|
|
);
|
|
|
|
logic [9:0] hCount, vCount;
|
|
wire hActive, hSEActive;
|
|
wire vActive, vSEActive;
|
|
|
|
vgagen vgatiming(
|
|
.nReset(nReset),
|
|
.pixClk(pixClk),
|
|
.hCount(hCount),
|
|
.hActive(hActive),
|
|
.hSEActive(hSEActive),
|
|
.nhSync(nhSync),
|
|
.vCount(vCount),
|
|
.vActive(vActive),
|
|
.vSEActive(vSEActive),
|
|
.nvSync(nvSync)
|
|
);
|
|
|
|
reg outTog;
|
|
|
|
always @(negedge pixClk or negedge nReset) begin
|
|
if(nReset == 0) begin
|
|
outTog <= 0;
|
|
end else begin
|
|
outTog <= !outTog;
|
|
end
|
|
end
|
|
|
|
assign vidOut = outTog & hSEActive & vSEActive;
|
|
assign vramAddr = 0;
|
|
assign nvramOE = 1;
|
|
assign nvramWE = 1;
|
|
assign nvramCE0 = 1;
|
|
assign nvramCE1 = 1;
|
|
assign cpuData[7:0] = ~vramData;
|
|
assign cpuData[15:8] = vramData;
|
|
|
|
endmodule
|