Warp-SE/cpld/IOBM.v

138 lines
3.2 KiB
Verilog

module IOBM(
/* PDS interface */
input C16M, input C8M, input E,
output nBR, output reg nASout, output reg nLDS, output reg nUDS, output reg nVMA,
input nASin, input nBG, input nDTACK, input nVPA, input nBERR, input nRES,
/* PDS address and data latch control */
output nAoutOE, output reg nDoutOE, output reg ALE0, output reg nDinLE,
/* IO bus slave port interface */
output reg IOACT, output reg IOBERR,
input Park, input IOREQ, input IOLDS, input IOUDS, input IOWE);
/* I/O bus slave port input synchronization */
reg IOREQr = 0;
always @(negedge C16M) begin IOREQr <= IOREQ; end
/* DTACK, BERR, RESET synchronization */
reg DTACKrr, DTACKrf, VPArr, VPArf, BERRrr, BERRrf, RESrr, RESrf;
always @(posedge C16M) begin
DTACKrr <= ~nDTACK;
VPArr <= ~nVPA;
BERRrr <= ~nBERR;
RESrr <= ~nRES;
end
always @(negedge C16M) begin
DTACKrf <= ~nDTACK;
VPArf <= ~nVPA;
BERRrf <= ~nBERR;
RESrf <= ~nRES;
end
wire DTACK = DTACKrr && DTACKrf;
wire BERR = BERRrr && BERRrf;
wire VPA = VPArr && VPArf;
wire RES = RESrr && RESrf;
/* E clock state */
reg [4:0] ES;
reg Er;
reg Er2;
always @(negedge C8M) begin Er <= E; end
always @(posedge C16M) begin Er2 <= Er; end
always @(posedge C16M) begin
if (Er2 && ~Er) ES <= 1;
else if (ES==0 || ES==19) ES <= 0;
else ES <= ES+1;
end
/* ETACK and VMA generation */
reg ETACK = 0;
always @(posedge C16M) begin ETACK <= ES==16 && ~nVMA; end
always @(posedge C16M) begin
if (ES==7 && IOACT && VPA) nVMA <= 0;
else if (ES==0) nVMA <= 1;
end
/* Bus Request/Grant control */
assign nBR = Park;
reg BGr0 = 0;
reg BGr1 = 0;
reg BG = 0;
always @(posedge C16M) begin
BGr0 <= ~nBG;
BGr1 <= BGr0;
if (BGr1 && nASin) BG <= 1;
else if (~BGr0) BG <= 0;
end
/* I/O bus state */
reg [2:0] IOS = 0;
always @(posedge C16M) begin
if (IOS==0) begin
if (IOREQr && BG) begin
if (~C8M) begin
IOS <= 1;
end else begin
IOS <= 0;
end
IOACT <= 1;
ALE0 <= 1;
end else begin
IOS <= 0;
IOACT <= 0;
ALE0 <= 0;
end
end else if (IOS==1) begin
IOS <= 2;
IOACT <= 1;
ALE0 <= 1;
IOBERR <= 0;
end else if (IOS==2) begin
IOS <= 3;
IOACT <= 1;
ALE0 <= 1;
end else if (IOS==3) begin
IOS <= 4;
IOACT <= 1;
ALE0 <= 1;
end else if (IOS==4) begin
IOS <= 5;
IOACT <= 1;
ALE0 <= 1;
end else if (IOS==5) begin
if (C8M && (DTACK || ETACK || BERR || RES)) begin
IOS <= 6;
IOACT <= 0;
IOBERR <= ~nBERR;
end else begin
IOS <= 5;
IOACT <= 1;
end
ALE0 <= 1;
end else if (IOS==6) begin
IOS <= 7;
IOACT <= 0;
ALE0 <= 0;
end else if (IOS==7) begin
IOS <= 0;
IOACT <= 0;
ALE0 <= 0;
end
end
/* PDS address and data latch control */
assign nAoutOE = ~BG;
always @(negedge C16M) begin nDinLE <= IOS==4 || IOS==5; end
always @(posedge C16M) begin
nDoutOE <= ~(IOWE && (IOS==1 || IOS==2 || IOS==3 ||
IOS==4 || IOS==5 || IOS==6));
end
/* AS, DS control */
always @(negedge C16M) begin
nASout <= ~(IOS==1 || IOS==2 || IOS==3 || IOS==4 || IOS==5);
nLDS <= ~(IOLDS && (((IOS==1 || IOS==2) && ~IOWE) || IOS==3 || IOS==4 || IOS==5));
nUDS <= ~(IOUDS && (((IOS==1 || IOS==2) && ~IOWE) || IOS==3 || IOS==4 || IOS==5));
end
endmodule