Warp-SE/cpld/XC95144XL/_impact.log
Zane Kaminski 1893b9b835 Prototype
2022-03-27 23:45:53 -04:00

78 lines
3.4 KiB
Plaintext

iMPACT Version: 14.7
iMPACT log file Started on Sun Mar 27 10:19:44 2022
Welcome to iMPACT
iMPACT Version: 14.7
Project: \\192.168.64.1\Repos\Warp-SE\cpld\\auto_project.ipf created.
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setCable -port svf -file"//192.168.64.1/Repos/Warp-SE/cpld/XC95144XL/MXSE.svf"
// *** BATCH CMD : addDevice -p 1 -file"//192.168.64.1/Repos/Warp-SE/cpld/XC95144XL/MXSE.jed"
'1': Loading file '//192.168.64.1/Repos/Warp-SE/cpld/XC95144XL/MXSE.jed' ...
done.
INFO:iMPACT:1777 -
Reading C:/Xilinx/14.7/ISE_DS/ISE/xc9500xl/data/xc95144xl.bsd...
INFO:iMPACT:501 - '1': Added Device xc95144xl successfully.
----------------------------------------------------------------------
INFO:iMPACT - Current time: 3/27/2022 10:20:16 AM
WARNING:iMPACT - Warning: SVF Programming of 9500 series CPLDs is not supported by every third-party boundary-scan tool provider. Please check for support before using this SVF file to program a 9500 series device.
// *** BATCH CMD : Erase -p 1
'1': Erasing device...
'1': Erasure completed successfully.
PROGRESS_START - Starting Operation.
PROGRESS_END - End Operation.
Elapsed time = 0 sec.
INFO:iMPACT - Current time: 3/27/2022 10:20:29 AM
WARNING:iMPACT - Warning: SVF Programming of 9500 series CPLDs is not supported by every third-party boundary-scan tool provider. Please check for support before using this SVF file to program a 9500 series device.
// *** BATCH CMD : Program -p 1 -e -v
'1': Erasing device...
'1': Erasure completed successfully.
'1': Programming device...
PROGRESS_START - Starting Operation.
done.
'1': Putting device in ISP mode...done.
'1': Putting device in ISP mode...done.
'1': Verifying device...done.
'1': Verification completed successfully.
'1': Putting device in ISP mode...done.
'1': Programming completed successfully.
PROGRESS_END - End Operation.
Elapsed time = 3 sec.
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -ss
// *** BATCH CMD : setMode -sm
// *** BATCH CMD : setMode -hw140
// *** BATCH CMD : setMode -spi
// *** BATCH CMD : setMode -acecf
// *** BATCH CMD : setMode -acempm
// *** BATCH CMD : setMode -pff
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : saveProjectFile -file"\\192.168.64.1\Repos\Warp-SE\cpld\\auto_project.ipf"
Backup of auto project '\\192.168.64.1\Repos\Warp-SE\cpld\\auto_project_1.ipf'created.
Project: '\\192.168.64.1\Repos\Warp-SE\cpld\\auto_project.ipf' created.
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -ss
// *** BATCH CMD : setMode -sm
// *** BATCH CMD : setMode -hw140
// *** BATCH CMD : setMode -spi
// *** BATCH CMD : setMode -acecf
// *** BATCH CMD : setMode -acempm
// *** BATCH CMD : setMode -pff
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : saveProjectFile -file"\\192.168.64.1\Repos\Warp-SE\cpld\\auto_project.ipf"
// *** BATCH CMD : setMode -bs
INFO:iMPACT - Launching WebTalk, please refer to the webtalk log at \\192.168.64.1\Repos\Warp-SE\cpld\webtalk.log for details.
INFO:iMPACT - Running wbtc successfully.
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : deleteDevice -position 1
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -ss
// *** BATCH CMD : setMode -sm
// *** BATCH CMD : setMode -hw140
// *** BATCH CMD : setMode -spi
// *** BATCH CMD : setMode -acecf
// *** BATCH CMD : setMode -acempm
// *** BATCH CMD : setMode -pff