Warp-SE/cpld/CS.v
2021-10-29 06:04:59 -04:00

63 lines
2.5 KiB
Verilog

module CS(
/* MC68HC000 interface */
input [23:08] A, input CLK, input nRES, input nWE,
/* AS cycle detection */
input BACT,
/* Device select outputs */
output IOCS, output SCSICS, output IOPWCS, output IACS, output ROMCS, output RAMCS, output SndRAMCSWR);
/* Overlay control */
reg nOverlay0 = 0;
reg nOverlay1 = 0;
wire Overlay = ~nOverlay1;
wire ODCS = A[23:20]==4'h4; // Disable overlay
always @(posedge CLK, negedge nRES) begin
if (~nRES) nOverlay0 <= 0;
else if (BACT && ODCS) nOverlay0 <= 1;
end
always @(posedge CLK) begin
if (~BACT) nOverlay1 <= nOverlay0;
end
/* Select signals - FSB domain */
wire RAMCS_OverlayOff = A[23:22]==2'b00;
wire RAMCS_OverlayOn = A[23:21]==3'b011;
assign RAMCS = (RAMCS_OverlayOff && ~Overlay) || // 000000-3FFFFF when overlay disabled
(RAMCS_OverlayOn && Overlay); // 600000-7FFFFF when overlay enabled
wire VidRAMCSWR64k = RAMCS && A[21:20]==2'h3 && A[19:16]==4'hF && ~nWE; // 3F0000-3FFFFF / 7F0000-7FFFFF
wire VidRAMCSWR = VidRAMCSWR64k && (
(A[15:12]==4'h2) || // 1792 bytes RAM, 2304 bytes video
(A[15:12]==4'h3) || // 4096 bytes video
(A[15:12]==4'h4) || // 4096 bytes video
(A[15:12]==4'h5) || // 4096 bytes video
(A[15:12]==4'h6) || // 4096 bytes video
(A[15:12]==4'h7) || // 3200 bytes video, 896 bytes RAM,
(A[15:12]==4'hA) || // 256 bytes RAM, 768 bytes sound, 768 bytes RAM, 2304 bytes video
(A[15:12]==4'hB) || // 4096 bytes video
(A[15:12]==4'hC) || // 4096 bytes video
(A[15:12]==4'hD) || // 4096 bytes video
(A[15:12]==4'hE) || // 4096 bytes video
(A[15:12]==4'hF)); // 3200 bytes video, 128 bytes RAM (system error space), 768 bytes sound
assign SndRAMCSWR = VidRAMCSWR64k && (
(A[15:12]==4'hF && (A[11:8]==4'hD || A[11:8]==4'hE || A[11:8]==4'hF)) ||
(A[15:12]==4'hA && (A[11:8]==4'h1 || A[11:8]==4'h2 || A[11:8]==4'h3)));
assign ROMCS = A[23:20]==4'h4 || (A[23:20]==4'h0 && Overlay);
/* Select signals - IOB domain */
assign IACS = A[23:08]==16'hFFFF; // IACK
assign IOCS = A[23:20]==4'h5 || // SCSI
A[23:20]==4'h8 || // empty
A[23:20]==4'h9 || // SCC read/reset
A[23:20]==4'hA || // empty
A[23:20]==4'hB || // SCC write
A[23:20]==4'hC || // empty
A[23:20]==4'hD || // IWM
A[23:20]==4'hE || // VIA
A[23:20]==4'hF || // IACK
VidRAMCSWR;
assign SCSICS = A[23:20]==4'h5; // SCSI
assign IOPWCS = RAMCS_OverlayOff && ~nWE;
endmodule