Warp-SE/cpld/WarpSE.v

181 lines
4.1 KiB
Verilog

module WarpSE(
input [23:1] A_FSB,
output [23:22] GA,
input nAS_FSB,
input nLDS_FSB,
input nUDS_FSB,
input nWE_FSB,
output nDTACK_FSB,
output nVPA_FSB,
output nBERR_FSB,
input FCLK,
input C16M,
input C8M,
input E,
input nDTACK_IOB,
input nVPA_IOB,
output nVMA_IOB,
output nAS_IOB,
output nUDS_IOB,
output nLDS_IOB,
output RnW_IOB,
output nBR_IOB,
input nBG_IOB,
input nBERR_IOB,
inout nRES,
input nIPL2,
output nROMOE,
output nRAMLWE,
output nRAMUWE,
output nROMWE,
output nRAS,
output nCAS,
output [11:0] RA,
output nOE,
output nADoutLE0,
output nADoutLE1,
output nAoutOE,
output nDoutOE,
output nDinOE,
output nDinLE,
output MCKE,
input [5:0] DBG);
/* GA gated (translated) address output */
assign GA[23:22] = A_FSB[23:22];
/*assign GA[23:22] = (
// $800000-$8FFFFF to $000000-$0FFFFF (1 MB)
(A_FSB[23:20]==4'h8) ||
// $700000-$7EFFFF to $300000-$3EFFFF (960 kB)
(A_FSB[23:20]==4'h7 && A_FSB[19:16]!=4'hF) ||
// $600000-$6FFFFF to $200000-$2FFFFF (1 MB)
(A_FSB[23:20]==4'h6)) ? 2'b00 : A_FSB[23:22];*/
/* Reset input and open-drain output */
wire nRESin = nRES;
wire nRESout;
assign nRES = !nRESout ? 1'b0 : 1'bZ;
/* AS cycle detection */
wire BACT, BACTr;
/* MC68k clock enable */
wire MCKEi;
/* Refresh request/ack signals */
wire RefReq, RefUrg;
/* QoS enable */
wire IOQoSEN;
/* FSB chip select signals */
wire IOCS, IORealCS, IOPWCS, IACKCS;
wire ROMCS, ROMCS4X;
wire RAMCS, RAMCS0X;
wire IOQoSCS, SndQoSCS;
CS cs(
/* MC68HC000 interface */
A_FSB[23:08], FCLK, nRESin, nWE_FSB,
/* /AS cycle detection */
BACT,
/* QoS enable input */
IOQoSEN,
/* Device select outputs */
IOCS, IORealCS, IOPWCS, IACKCS,
ROMCS, ROMCS4X,
RAMCS, RAMCS0X,
IOQoSCS, SndQoSCS);
wire RAMReady;
RAM ram(
/* MC68HC000 interface */
FCLK, A_FSB[21:1], nWE_FSB,
nAS_FSB, nLDS_FSB, nUDS_FSB, nDTACK_FSB,
/* AS cycle detection inputs */
BACT, BACTr,
/* RAM and ROM select inputs */
RAMCS, RAMCS0X, ROMCS, ROMCS4X,
/* RAM ready output */
RAMReady,
/* Refresh Counter Interface */
RefReq, RefUrg,
/* DRAM and NOR flash interface */
RA[11:0], nRAS, nCAS,
nRAMLWE, nRAMUWE, nOE, nROMOE, nROMWE);
wire IONPReady, IOPWReady;
wire IOREQ, IORW;
wire IOL0, IOU0;
wire ALE0S, ALE0M, ALE1;
assign nADoutLE0 = ~(ALE0S || ALE0M);
assign nADoutLE1 = ~ALE1;
wire IOACT, IODONE, IOBERR;
IOBS iobs(
/* MC68HC000 interface */
FCLK, nWE_FSB, nAS_FSB, nLDS_FSB, nUDS_FSB,
/* AS cycle detection */
BACT,
/* Select signals */
IOCS, IORealCS, IOPWCS,
/* FSB cycle termination outputs */
IONPReady, IOPWReady, nBERR_FSB,
/* Read data OE control */
nDinOE,
/* IOB Master Controller Interface */
IOREQ, IORW,
IOACT, IODONE, IOBERR,
/* FIFO primary level control */
ALE0S, IOL0, IOU0,
/* FIFO secondary level control */
ALE1);
wire AoutOE;
assign nAoutOE = !AoutOE;
wire nAS_IOBout, nLDS_IOBout, nUDS_IOBout, RnW_IOBout, nVMA_IOBout;
assign nAS_IOB = AoutOE ? nAS_IOBout : 1'bZ;
assign nLDS_IOB = AoutOE ? nLDS_IOBout : 1'bZ;
assign nUDS_IOB = AoutOE ? nUDS_IOBout : 1'bZ;
assign RnW_IOB = AoutOE ? RnW_IOBout : 1'bZ;
assign nVMA_IOB = AoutOE ? nVMA_IOBout : 1'bZ;
IOBM iobm(
/* PDS interface */
C16M, C8M, E,
nAS_IOBout, nLDS_IOBout, nUDS_IOBout, RnW_IOBout, nVMA_IOBout,
nDTACK_IOB, nVPA_IOB, nBERR_IOB, nRESin,
/* PDS address and data latch control */
AoutOE, nDoutOE, ALE0M, nDinLE,
/* IO bus slave port interface */
IOREQ, IORW, IOL0, IOU0,
IOACT, IODONE, IOBERR);
CNT cnt(
/* FSB clock and E clock inputs */
FCLK, C8M, E,
/* Refresh request */
RefReq, RefUrg,
/* Reset, button */
nRESout, nRESin, nIPL2,
/* Mac PDS bus master control outputs */
AoutOE, nBR_IOB,
/* QoS control */
BACT, BACTr,
IOQoSCS, SndQoSCS, IACKCS,
IOQoSEN, MCKEi);
FSB fsb(
/* MC68HC000 interface */
FCLK, nAS_FSB, nDTACK_FSB, nVPA_FSB,
/* MC68HC000 clock enable */
MCKEi, MCKE,
/* FSB cycle detection */
BACT, BACTr,
/* Ready inputs */
ROMCS4X,
RAMCS0X, RAMReady,
IOPWCS, IOPWReady, IONPReady,
IOQoSEN,
/* Interrupt acknowledge select */
IACKCS);
endmodule