gerber preview CR2032 Toast v1.3 # CR2032 Toaster This is intended to slot in vertically into a 1/2AA battery holder seen on many Macintosh computers for the PRAM battery. It will allow the use of the less expensive, easier to find and less leaky CR2032 coin batteries. This is meant to be used laying flat in the battery holder like so: installed 1/2aa battery adapter There's also two extra through holes to solder wires for other uses. ## Bill of Materials | Quantity | Product Number | Datasheet | | :------- | --------------- | ------------------------------------------------------------ | | 1 | BAT-HLD-001-THM | https://linxtechnologies.com/wp/wp-content/uploads/bat-hld-001-thm.pdf | ## License Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. ## Community For more great retro hardware projects and a great community check out: [Tinker Different](https://tinkerdifferent.com/) Join us in #skunkworks on [Discord](https://discord.gg/GKcvtgU7P9) to help make retro solutions available to all. [Discord Open Retro SCSI skunkworks](https://discord.gg/GKcvtgU7P9)