mirror of
https://github.com/alxlab-zone66x/cr2032_toaster.git
synced 2024-12-01 15:50:30 +00:00
61 lines
2.2 KiB
Markdown
61 lines
2.2 KiB
Markdown
<img src="docs/CR2032 Toaster v1.3.png" alt="gerber preview CR2032 Toast v1.3" />
|
|
|
|
# CR2032 Toaster
|
|
|
|
This is intended to slot in vertically into a 1/2AA battery holder seen on many Macintosh computers for the PRAM battery. It will allow the use of the less expensive, easier to find and less leaky CR2032 coin batteries.
|
|
|
|
This is meant to be used laying flat in the battery holder like so:
|
|
|
|
<img src="docs/macintosh_se_battery_adapter.jpg" alt="installed 1/2aa battery adapter" style="zoom: 25%; margin: 0;" />
|
|
|
|
There's also two extra through holes to solder wires for other uses.
|
|
|
|
|
|
|
|
## Bill of Materials
|
|
|
|
| Quantity | Product Number | Datasheet |
|
|
| :------- | --------------- | ------------------------------------------------------------ |
|
|
| 1 | BAT-HLD-001-THM | https://linxtechnologies.com/wp/wp-content/uploads/bat-hld-001-thm.pdf |
|
|
|
|
|
|
|
|
## Manufacturing
|
|
|
|
The release includes the manufacturing files for JLCPCB specifically. If you need to the gerber files, BOM or component pick & place in a different format then you would have to generate them yourself.
|
|
|
|
The PCB thickness chosen should be at least 1.6mm to provide good contact with the battery holder.
|
|
|
|
|
|
|
|
## License
|
|
|
|
<a rel="license" href="http://creativecommons.org/licenses/by-nc-sa/4.0/"><img alt="Creative Commons License" style="border-width:0" src="https://i.creativecommons.org/l/by-nc-sa/4.0/88x31.png" /></a>
|
|
|
|
CR2032 Toaster by [Alexandre Marcoux](https://github.com/alxlab-zone66x/cr2032_toaster) licensed under a <a rel="license" href="http://creativecommons.org/licenses/by-nc-sa/4.0/">Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License</a>.
|
|
|
|
|
|
|
|
## Community
|
|
|
|
For more great retro hardware projects and a great community check out:
|
|
|
|
[<img src="docs/tinker_different_sat_rev_600.png" alt="Tinker Different" style="float: left;" alt="Tinker Different" style="float: left;" />](https://tinkerdifferent.com/)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Join us in #skunkworks on [Discord](https://discord.gg/GKcvtgU7P9) to help make retro solutions available to all.
|
|
|
|
[<img src="docs\discordbanner.png" alt="Discord Open Retro SCSI skunkworks" style="float: left;" />](https://discord.gg/GKcvtgU7P9)
|
|
|
|
|
|
|
|
|
|
|