Add non-editable mouser project

This commit is contained in:
Eric Helgeson 2021-04-20 10:54:50 -05:00
parent e2522d0506
commit 671590dd95
2 changed files with 7 additions and 20 deletions

View File

@ -36,6 +36,12 @@ The community has created a few assembly videos:
### Version 1.0-b & 1.0-c BOM
#### Mouser Cart
https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=c5cc83feff
#### Parts
STM32F103C8T6 (U1) aka BluePill board. Beware of fake/scams. Look for reviews. Amazon, ebay, etc.
* 2x 330 (RN2, RN4) Resistor nets https://www.mouser.com/ProductDetail/652-4610X-1LF-330

View File

@ -21,26 +21,7 @@ Order the boards from https://jlcpcb.com/ or your manufactuer of choice.
#### Version 1.0-b & 1.0-c BOM
STM32F103C8T6 (U1) aka BluePill board. Beware of fake/scams. Look for reviews. Amazon, ebay, etc.
* 2x 330 (RN2, RN4) Resistor nets https://www.mouser.com/ProductDetail/652-4610X-1LF-330
* 2x 220 (RN1, RN3) Resistor nets https://www.mouser.com/ProductDetail/652-4610X-1LF-220
* 2x Diodes https://www.mouser.com/ProductDetail/583-1N5818-T
* SD Card Holder (J1) https://www.mouser.com/ProductDetail/538-104031-0811
* Headers https://www.mouser.com/ProductDetail/872-920-0011-01
* 50 PIN SCSI header https://www.mouser.com/ProductDetail/517-30350-6002/
- May substitute with 2 rows of headers from above.
- **Note on Right angle connectors** - it appears Right angle headers are notched differently then the pin out. Be sure to note PIN 1/red stripe on the cable match up.
#### Optional
Floppy/Berg Power header https://www.mouser.com/ProductDetail/571-1718254
- Required if your machine does not supply power via TERM POWER. For example a Mac Plus or Mac with a Analog/PSU board that has not been recapped.
https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=c5cc83feff
### BluePill