mirror of
https://github.com/dkgrizzly/GreenSCSI.git
synced 2024-11-22 04:31:03 +00:00
Move troubleshooting to wiki
This commit is contained in:
parent
4c4d0146c5
commit
8711299b8f
27
README.adoc
27
README.adoc
@ -100,32 +100,7 @@ To enable termination place the two jumpers on the TERM block. Termination shoul
|
||||
|
||||
## Troubleshooting
|
||||
|
||||
### Review the LOG.txt
|
||||
|
||||
There should logs that indicate what BlueSCSI did at startup.
|
||||
|
||||
### LED Flashes on and off 3x
|
||||
|
||||
This indicates BlueSCSI could not find any files on the SD card or communicate with the SD card.
|
||||
|
||||
Ensure your files are named properly (case sensitive) following the naming convetion in the readme.
|
||||
|
||||
If you recived a kit - verify all connections and that the outside of the SD holder is grounded.
|
||||
|
||||
|
||||
### LED Flashes on and off 5x
|
||||
|
||||
Format your card with https://www.sdcard.org/downloads/formatter/
|
||||
|
||||
### Slow performance
|
||||
|
||||
Ensure you are using a good SD card. SD card quality can vary widely.
|
||||
|
||||
Format your card as ExFat - users have seen quite a jump in performance.
|
||||
|
||||
### (Kit Only) Verify you are not using a bad fake
|
||||
|
||||
https://github.com/keirf/Greaseweazle/wiki/STM32-Fakes[How to tell if your STM32 is fake]
|
||||
https://github.com/erichelgeson/BlueSCSI/wiki/Troubleshooting
|
||||
|
||||
### Older Version Specific Troubleshooting
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user