mirror of
https://github.com/dkgrizzly/GreenSCSI.git
synced 2024-11-22 04:31:03 +00:00
162 lines
6.6 KiB
Plaintext
162 lines
6.6 KiB
Plaintext
# BlueSCSI
|
|
:toc: macro
|
|
|
|
BlueSCSI & ArdSCSino are hardware that reproduces SCSI devices (hard disks) with an Arduino STM32F103C (aka Blue Pill.)
|
|
|
|
`BlueSCSI` created by https://github.com/erichelgeson[erichelgeson] is a fork of `ArdSCSino-stm32` which adds:
|
|
|
|
* Mac specific functionality
|
|
* Passive SCSI termination
|
|
* An alternative power source if not able to be powered by the SCSI bus
|
|
|
|
`ArdSCSino-stm32` created by https://github.com/ztto/ArdSCSino-stm32[ztto] is the STM32 version of `ArdSCSino`
|
|
|
|
`ArdSCSino` created by https://twitter.com/h_koma2[Tambo (TNB Seisakusho)]
|
|
|
|
image::docs/buynow.png[link=https://gum.co/bluescsi-1b, 150]
|
|
image::docs/discordbanner.png[https://discord.gg/GKcvtgU7P9, 150]
|
|
|
|
Join us in #bluescsi on https://discord.gg/GKcvtgU7P9[Discord] or open an issue on this repo.
|
|
|
|
toc::[]
|
|
|
|
## Compatibility
|
|
|
|
If your computer is not listed below - it may be compatible but there is no guarantee it will work. This device is designed and tested to work with pre-PowerPC Macs.
|
|
|
|
### Compatible
|
|
|
|
#### Tested by Me
|
|
|
|
SE, SE/30, Classic, Classic II, Color Classic, LC I/II/III, LC 475, LC 575
|
|
|
|
#### Reported by others
|
|
|
|
https://68kmla.org/forums/topic/61045-arduino-scsi-device-work-in-progress/?do=findComment&comment=663077[IIcx], https://68kmla.org/forums/topic/61045-arduino-scsi-device-work-in-progress/?do=findComment&comment=664446[PowerBook 100 (with custom adapter)]
|
|
|
|
### Incompatible
|
|
|
|
Plus, PowerPC (SCSI-2?)
|
|
|
|
## Performance
|
|
|
|
Tested on a Color Classic with https://macintoshgarden.org/apps/scsi-director-pro-40[SCSI Director Pro 4]
|
|
```
|
|
1024KB/Sec Write
|
|
900KB/Sec Read
|
|
1.01ms Seek
|
|
```
|
|
|
|
## Assembly
|
|
|
|
See <<docs/assembly.md,docs/assembly.md>>
|
|
|
|
## Usage
|
|
|
|
Hard Disk image files are placed in the root directory of a `FAT32` (or `ExFat`) formatted SD card. You can create a disk image using `dd` or any raw disk will work. See premade disks below. These images are compatible with the RaSCSI device and Basilisk II emulator.
|
|
|
|
The naming convention is as follows (file name max 32 characters). Note you may mount multiple drives at a time to different SCSI ID's.
|
|
|
|
`HDxy_512.hda`
|
|
```
|
|
HD - Hard Disk
|
|
x - SCSI ID to attach to. 0-7 (though 7 on a Macintosh is the System)
|
|
y - LUN id usually 0.
|
|
512 - Sector size. Usually 512. 256, 512, & 1024 supported.
|
|
```
|
|
|
|
### Examples:
|
|
|
|
`HD10_512.hda` - Hard Disk at SCSI ID 1, LUN 0, sector size of 512.
|
|
`HD51_512 System 6.0.8L LC.hda` - Hard Disk at SCSI ID 5, LUN 1, sector size of 512. Text between block size and .hda is ignored.
|
|
|
|
### Bad
|
|
|
|
`HD99_712 foo bar fizz buzz bang.hda` Over 32 chars and invalid SCSI/LUN/Block size....
|
|
|
|
If no image files are found PC13 will pulse on and off. Check the log file for any errors.
|
|
|
|
### Blanks & Premade Images
|
|
|
|
Any blank raw file will do. They are easy to come by as they are used in other devices and emulators such as https://www.emaculation.com/doku.php/basiliskii_osx_setup[Basilisk II].
|
|
|
|
* Blanks of various sizes from gryphel.com - https://www.gryphel.com/c/minivmac/extras/blanks/
|
|
* Premade from savagetaylor.com - https://www.savagetaylor.com/downloads/downloads-macintosh/
|
|
* Premade from RaSCSI - http://macintoshgarden.org/apps/rascsi-68kmla-edition
|
|
|
|
### Custom Disk Images
|
|
|
|
This technique is useful when you would like a disk image larger than the pre-built images in the previous section.
|
|
|
|
The following instructions demonstrates the process using https://ss64.com/osx/dd.html[dd] on a modern Mac:
|
|
|
|
1. Open terminal.
|
|
2. The following command will create a blank disk image. You can modify the command to suit your use.
|
|
* `dd if=/dev/zero of=example.hda bs=1m count=500`
|
|
* The `count` field defines the number of megabytes (`bs=1m`) the total disk image should be.
|
|
* The output file from the command is "example.hda". This can be changed in the `of=example.hda` field.
|
|
3. Place the new blank disk image in the root directory of your SD card.
|
|
4. If you do not already have a tool to format SCSI drives, https://macintoshgarden.org/apps/lido-756[download LIDO]. You can use an emulator such as https://www.emaculation.com/doku.php/basiliskii_osx_setup[Basilisk II] to move files to the image to prepare your installation.
|
|
5. After booting into your target machine with the working Mac OS disk image on your BlueSCSI from step 3, format the blank disk.
|
|
|
|
### Termination
|
|
|
|
To enable termination place the two jumpers on the TERM block. Termination should be enabled if it is the last device in the chain - which is normally how it is used.
|
|
|
|
## Troubleshooting
|
|
|
|
### Log Files
|
|
|
|
If your device is not working - check the `LOG.txt` in the root of the SD card.
|
|
|
|
### Verify you are not using a fake
|
|
|
|
https://github.com/keirf/Greaseweazle/wiki/STM32-Fakes[How to tell if your STM32 is fake]
|
|
|
|
### Performance is slower than expected
|
|
|
|
Try a different SD card. Cheap/old SD cards can affect performance.
|
|
|
|
## Development
|
|
|
|
Below is for users who wish to edit or develop on the BluePill - normal users should not need to worry about this.
|
|
|
|
### Setup PlatformIO
|
|
|
|
Open the project in https://platformio.org/[PlatformIO] and everything is pre-configured.
|
|
|
|
## Flashing
|
|
|
|
When flashing you have two options:
|
|
|
|
Flash by setting up the IDE and re-compiling and programming. If you are a developer and plan to contribute this method is what you should use.
|
|
|
|
You may also flash the `.bin` file directly from STM32CubeProgrammer. If you are not a developer and just wish to get the code to the BluePill, use this (as development environment setup can be a bit tricky!)
|
|
|
|
### Using STLink v2 (prefered)
|
|
|
|
1. Remove SD Card
|
|
2. Make sure the STLink is up to date - https://my.st.com/content/my_st_com/en/products/development-tools/software-development-tools/stm32-software-development-tools/stm32-programmers/stsw-link007.license=1610785194992.product=STSW-LINK007.version=2.37.26.html[Latest Firmware]
|
|
3. Connect pins `SWDIO`(2), `GND`(4), `SWCLK`(6), and `3.3v`(8) from the programmer to the Blue Pill. NOTE: These are not the same as Serial ports.
|
|
4. Run the PlatformIO: Upload task.
|
|
5. You should see the LED `PC_13` flashing indicating no SD Card detected.
|
|
6. Insert SD Card, boot on your favorite Mac!
|
|
|
|
#### Trouble Shooting
|
|
|
|
If the device is not detected you may need to hold reset, click program, once it is detected release reset.
|
|
|
|
If you are unable to get the device in DFU mode for programming you may need to use https://www.st.com/en/development-tools/stm32cubeprog.html[STM32CubeProgrammer] to erase the chip.
|
|
|
|
### Alterantive upload methods
|
|
|
|
See the https://docs.platformio.org/en/latest/boards/ststm32/bluepill_f103c8.html#uploading[uploading] documentation on PlatformIO for alterantives.
|
|
|
|
### Using USB HID
|
|
|
|
Note: I have not been able to get this method to work.
|
|
|
|
## Making Gerber files
|
|
|
|
https://support.jlcpcb.com/article/44-how-to-export-kicad-pcb-to-gerber-files
|