2020-09-14 20:32:07 +00:00
|
|
|
// Copyright 2017-2019 Espressif Systems (Shanghai) PTE LTD
|
|
|
|
//
|
|
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
|
|
// you may not use this file except in compliance with the License.
|
|
|
|
// You may obtain a copy of the License at
|
|
|
|
|
|
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
//
|
|
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
|
|
// See the License for the specific language governing permissions and
|
|
|
|
// limitations under the License.
|
|
|
|
|
|
|
|
#include <string.h>
|
|
|
|
#include <stdbool.h>
|
|
|
|
|
|
|
|
#include "freertos/FreeRTOS.h"
|
|
|
|
#include "freertos/task.h"
|
|
|
|
#include "freertos/semphr.h"
|
|
|
|
|
|
|
|
#include "esp_hid_gap.h"
|
|
|
|
|
|
|
|
static const char *TAG = "ESP_HID_GAP";
|
|
|
|
|
|
|
|
// uncomment to print all devices that were seen during a scan
|
|
|
|
#define GAP_DBG_PRINTF(...) //printf(__VA_ARGS__)
|
|
|
|
//static const char * gap_bt_prop_type_names[5] = {"","BDNAME","COD","RSSI","EIR"};
|
|
|
|
|
|
|
|
static esp_hid_scan_result_t *bt_scan_results = NULL;
|
|
|
|
static size_t num_bt_scan_results = 0;
|
|
|
|
|
|
|
|
static esp_hid_scan_result_t *ble_scan_results = NULL;
|
|
|
|
static size_t num_ble_scan_results = 0;
|
|
|
|
|
|
|
|
static xSemaphoreHandle bt_hidh_cb_semaphore = NULL;
|
|
|
|
#define WAIT_BT_CB() xSemaphoreTake(bt_hidh_cb_semaphore, portMAX_DELAY)
|
|
|
|
#define SEND_BT_CB() xSemaphoreGive(bt_hidh_cb_semaphore)
|
|
|
|
|
|
|
|
static xSemaphoreHandle ble_hidh_cb_semaphore = NULL;
|
|
|
|
#define WAIT_BLE_CB() xSemaphoreTake(ble_hidh_cb_semaphore, portMAX_DELAY)
|
|
|
|
#define SEND_BLE_CB() xSemaphoreGive(ble_hidh_cb_semaphore)
|
|
|
|
|
|
|
|
#define SIZEOF_ARRAY(a) (sizeof(a)/sizeof(*a))
|
|
|
|
|
|
|
|
static const char *ble_gap_evt_names[] = { "ADV_DATA_SET_COMPLETE", "SCAN_RSP_DATA_SET_COMPLETE", "SCAN_PARAM_SET_COMPLETE", "SCAN_RESULT", "ADV_DATA_RAW_SET_COMPLETE", "SCAN_RSP_DATA_RAW_SET_COMPLETE", "ADV_START_COMPLETE", "SCAN_START_COMPLETE", "AUTH_CMPL", "KEY", "SEC_REQ", "PASSKEY_NOTIF", "PASSKEY_REQ", "OOB_REQ", "LOCAL_IR", "LOCAL_ER", "NC_REQ", "ADV_STOP_COMPLETE", "SCAN_STOP_COMPLETE", "SET_STATIC_RAND_ADDR", "UPDATE_CONN_PARAMS", "SET_PKT_LENGTH_COMPLETE", "SET_LOCAL_PRIVACY_COMPLETE", "REMOVE_BOND_DEV_COMPLETE", "CLEAR_BOND_DEV_COMPLETE", "GET_BOND_DEV_COMPLETE", "READ_RSSI_COMPLETE", "UPDATE_WHITELIST_COMPLETE"};
|
|
|
|
static const char *bt_gap_evt_names[] = { "DISC_RES", "DISC_STATE_CHANGED", "RMT_SRVCS", "RMT_SRVC_REC", "AUTH_CMPL", "PIN_REQ", "CFM_REQ", "KEY_NOTIF", "KEY_REQ", "READ_RSSI_DELTA"};
|
|
|
|
static const char *ble_addr_type_names[] = {"PUBLIC", "RANDOM", "RPA_PUBLIC", "RPA_RANDOM"};
|
|
|
|
|
|
|
|
const char *ble_addr_type_str(esp_ble_addr_type_t ble_addr_type)
|
|
|
|
{
|
|
|
|
if (ble_addr_type > BLE_ADDR_TYPE_RPA_RANDOM) {
|
|
|
|
return "UNKNOWN";
|
|
|
|
}
|
|
|
|
return ble_addr_type_names[ble_addr_type];
|
|
|
|
}
|
|
|
|
|
|
|
|
const char *ble_gap_evt_str(uint8_t event)
|
|
|
|
{
|
|
|
|
if (event >= SIZEOF_ARRAY(ble_gap_evt_names)) {
|
|
|
|
return "UNKNOWN";
|
|
|
|
}
|
|
|
|
return ble_gap_evt_names[event];
|
|
|
|
}
|
|
|
|
|
|
|
|
const char *bt_gap_evt_str(uint8_t event)
|
|
|
|
{
|
|
|
|
if (event >= SIZEOF_ARRAY(bt_gap_evt_names)) {
|
|
|
|
return "UNKNOWN";
|
|
|
|
}
|
|
|
|
return bt_gap_evt_names[event];
|
|
|
|
}
|
|
|
|
|
|
|
|
const char *esp_ble_key_type_str(esp_ble_key_type_t key_type)
|
|
|
|
{
|
|
|
|
const char *key_str = NULL;
|
|
|
|
switch (key_type) {
|
|
|
|
case ESP_LE_KEY_NONE:
|
|
|
|
key_str = "ESP_LE_KEY_NONE";
|
|
|
|
break;
|
|
|
|
case ESP_LE_KEY_PENC:
|
|
|
|
key_str = "ESP_LE_KEY_PENC";
|
|
|
|
break;
|
|
|
|
case ESP_LE_KEY_PID:
|
|
|
|
key_str = "ESP_LE_KEY_PID";
|
|
|
|
break;
|
|
|
|
case ESP_LE_KEY_PCSRK:
|
|
|
|
key_str = "ESP_LE_KEY_PCSRK";
|
|
|
|
break;
|
|
|
|
case ESP_LE_KEY_PLK:
|
|
|
|
key_str = "ESP_LE_KEY_PLK";
|
|
|
|
break;
|
|
|
|
case ESP_LE_KEY_LLK:
|
|
|
|
key_str = "ESP_LE_KEY_LLK";
|
|
|
|
break;
|
|
|
|
case ESP_LE_KEY_LENC:
|
|
|
|
key_str = "ESP_LE_KEY_LENC";
|
|
|
|
break;
|
|
|
|
case ESP_LE_KEY_LID:
|
|
|
|
key_str = "ESP_LE_KEY_LID";
|
|
|
|
break;
|
|
|
|
case ESP_LE_KEY_LCSRK:
|
|
|
|
key_str = "ESP_LE_KEY_LCSRK";
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
key_str = "INVALID BLE KEY TYPE";
|
|
|
|
break;
|
|
|
|
|
|
|
|
}
|
|
|
|
return key_str;
|
|
|
|
}
|
|
|
|
|
|
|
|
void esp_hid_scan_results_free(esp_hid_scan_result_t *results)
|
|
|
|
{
|
|
|
|
esp_hid_scan_result_t *r = NULL;
|
|
|
|
while (results) {
|
|
|
|
r = results;
|
|
|
|
results = results->next;
|
|
|
|
if (r->name != NULL) {
|
|
|
|
free((char *)r->name);
|
|
|
|
}
|
|
|
|
free(r);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static esp_hid_scan_result_t *find_scan_result(esp_bd_addr_t bda, esp_hid_scan_result_t *results)
|
|
|
|
{
|
|
|
|
esp_hid_scan_result_t *r = results;
|
|
|
|
while (r) {
|
|
|
|
if (memcmp(bda, r->bda, sizeof(esp_bd_addr_t)) == 0) {
|
|
|
|
return r;
|
|
|
|
}
|
|
|
|
r = r->next;
|
|
|
|
}
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void add_bt_scan_result(esp_bd_addr_t bda, esp_bt_cod_t *cod, esp_bt_uuid_t *uuid, uint8_t *name, uint8_t name_len, int rssi)
|
|
|
|
{
|
|
|
|
esp_hid_scan_result_t *r = find_scan_result(bda, bt_scan_results);
|
|
|
|
if (r) {
|
|
|
|
//Some info may come later
|
|
|
|
if (r->name == NULL && name && name_len) {
|
|
|
|
char *name_s = (char *)malloc(name_len + 1);
|
|
|
|
if (name_s == NULL) {
|
|
|
|
ESP_LOGE(TAG, "Malloc result name failed!");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
memcpy(name_s, name, name_len);
|
|
|
|
name_s[name_len] = 0;
|
|
|
|
r->name = (const char *)name_s;
|
|
|
|
}
|
|
|
|
if (r->bt.uuid.len == 0 && uuid->len) {
|
|
|
|
memcpy(&r->bt.uuid, uuid, sizeof(esp_bt_uuid_t));
|
|
|
|
}
|
|
|
|
if (rssi != 0) {
|
|
|
|
r->rssi = rssi;
|
|
|
|
}
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
r = (esp_hid_scan_result_t *)malloc(sizeof(esp_hid_scan_result_t));
|
|
|
|
if (r == NULL) {
|
|
|
|
ESP_LOGE(TAG, "Malloc bt_hidh_scan_result_t failed!");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
r->transport = ESP_HID_TRANSPORT_BT;
|
|
|
|
memcpy(r->bda, bda, sizeof(esp_bd_addr_t));
|
|
|
|
memcpy(&r->bt.cod, cod, sizeof(esp_bt_cod_t));
|
|
|
|
memcpy(&r->bt.uuid, uuid, sizeof(esp_bt_uuid_t));
|
|
|
|
r->usage = esp_hid_usage_from_cod((uint32_t)cod);
|
|
|
|
r->rssi = rssi;
|
|
|
|
r->name = NULL;
|
|
|
|
if (name_len && name) {
|
|
|
|
char *name_s = (char *)malloc(name_len + 1);
|
|
|
|
if (name_s == NULL) {
|
|
|
|
free(r);
|
|
|
|
ESP_LOGE(TAG, "Malloc result name failed!");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
memcpy(name_s, name, name_len);
|
|
|
|
name_s[name_len] = 0;
|
|
|
|
r->name = (const char *)name_s;
|
|
|
|
}
|
|
|
|
r->next = bt_scan_results;
|
|
|
|
bt_scan_results = r;
|
|
|
|
num_bt_scan_results++;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void add_ble_scan_result(esp_bd_addr_t bda, esp_ble_addr_type_t addr_type, uint16_t appearance, uint8_t *name, uint8_t name_len, int rssi)
|
|
|
|
{
|
|
|
|
if (find_scan_result(bda, ble_scan_results)) {
|
|
|
|
ESP_LOGW(TAG, "Result already exists!");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
esp_hid_scan_result_t *r = (esp_hid_scan_result_t *)malloc(sizeof(esp_hid_scan_result_t));
|
|
|
|
if (r == NULL) {
|
|
|
|
ESP_LOGE(TAG, "Malloc ble_hidh_scan_result_t failed!");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
r->transport = ESP_HID_TRANSPORT_BLE;
|
|
|
|
memcpy(r->bda, bda, sizeof(esp_bd_addr_t));
|
|
|
|
r->ble.appearance = appearance;
|
|
|
|
r->ble.addr_type = addr_type;
|
|
|
|
r->usage = esp_hid_usage_from_appearance(appearance);
|
|
|
|
r->rssi = rssi;
|
|
|
|
r->name = NULL;
|
|
|
|
if (name_len && name) {
|
|
|
|
char *name_s = (char *)malloc(name_len + 1);
|
|
|
|
if (name_s == NULL) {
|
|
|
|
free(r);
|
|
|
|
ESP_LOGE(TAG, "Malloc result name failed!");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
memcpy(name_s, name, name_len);
|
|
|
|
name_s[name_len] = 0;
|
|
|
|
r->name = (const char *)name_s;
|
|
|
|
}
|
|
|
|
r->next = ble_scan_results;
|
|
|
|
ble_scan_results = r;
|
|
|
|
num_ble_scan_results++;
|
|
|
|
}
|
|
|
|
|
|
|
|
void print_uuid(esp_bt_uuid_t *uuid)
|
|
|
|
{
|
|
|
|
if (uuid->len == ESP_UUID_LEN_16) {
|
|
|
|
GAP_DBG_PRINTF("UUID16: 0x%04x", uuid->uuid.uuid16);
|
|
|
|
} else if (uuid->len == ESP_UUID_LEN_32) {
|
|
|
|
GAP_DBG_PRINTF("UUID32: 0x%08x", uuid->uuid.uuid32);
|
|
|
|
} else if (uuid->len == ESP_UUID_LEN_128) {
|
|
|
|
GAP_DBG_PRINTF("UUID128: %02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x", uuid->uuid.uuid128[0],
|
|
|
|
uuid->uuid.uuid128[1], uuid->uuid.uuid128[2], uuid->uuid.uuid128[3],
|
|
|
|
uuid->uuid.uuid128[4], uuid->uuid.uuid128[5], uuid->uuid.uuid128[6],
|
|
|
|
uuid->uuid.uuid128[7], uuid->uuid.uuid128[8], uuid->uuid.uuid128[9],
|
|
|
|
uuid->uuid.uuid128[10], uuid->uuid.uuid128[11], uuid->uuid.uuid128[12],
|
|
|
|
uuid->uuid.uuid128[13], uuid->uuid.uuid128[14], uuid->uuid.uuid128[15]);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void handle_bt_device_result(struct disc_res_param *disc_res)
|
|
|
|
{
|
|
|
|
GAP_DBG_PRINTF("BT : " ESP_BD_ADDR_STR, ESP_BD_ADDR_HEX(disc_res->bda));
|
|
|
|
uint32_t codv = 0;
|
|
|
|
esp_bt_cod_t *cod = (esp_bt_cod_t *)&codv;
|
|
|
|
int8_t rssi = 0;
|
|
|
|
uint8_t *name = NULL;
|
|
|
|
uint8_t name_len = 0;
|
|
|
|
esp_bt_uuid_t uuid;
|
|
|
|
|
|
|
|
uuid.len = ESP_UUID_LEN_16;
|
|
|
|
uuid.uuid.uuid16 = 0;
|
|
|
|
|
|
|
|
for (int i = 0; i < disc_res->num_prop; i++) {
|
|
|
|
esp_bt_gap_dev_prop_t *prop = &disc_res->prop[i];
|
|
|
|
if (prop->type != ESP_BT_GAP_DEV_PROP_EIR) {
|
|
|
|
GAP_DBG_PRINTF(", %s: ", gap_bt_prop_type_names[prop->type]);
|
|
|
|
}
|
|
|
|
if (prop->type == ESP_BT_GAP_DEV_PROP_BDNAME) {
|
|
|
|
name = (uint8_t *)prop->val;
|
|
|
|
name_len = strlen((const char *)name);
|
|
|
|
GAP_DBG_PRINTF("%s", (const char *)name);
|
|
|
|
} else if (prop->type == ESP_BT_GAP_DEV_PROP_RSSI) {
|
|
|
|
rssi = *((int8_t *)prop->val);
|
|
|
|
GAP_DBG_PRINTF("%d", rssi);
|
|
|
|
} else if (prop->type == ESP_BT_GAP_DEV_PROP_COD) {
|
|
|
|
memcpy(&codv, prop->val, sizeof(uint32_t));
|
|
|
|
GAP_DBG_PRINTF("major: %s, minor: %d, service: 0x%03x", esp_hid_cod_major_str(cod->major), cod->minor, cod->service);
|
|
|
|
} else if (prop->type == ESP_BT_GAP_DEV_PROP_EIR) {
|
|
|
|
uint8_t len = 0;
|
|
|
|
uint8_t *data = 0;
|
|
|
|
|
|
|
|
data = esp_bt_gap_resolve_eir_data((uint8_t *)prop->val, ESP_BT_EIR_TYPE_CMPL_16BITS_UUID, &len);
|
|
|
|
if (data == NULL) {
|
|
|
|
data = esp_bt_gap_resolve_eir_data((uint8_t *)prop->val, ESP_BT_EIR_TYPE_INCMPL_16BITS_UUID, &len);
|
|
|
|
}
|
|
|
|
if (data && len == ESP_UUID_LEN_16) {
|
|
|
|
uuid.len = ESP_UUID_LEN_16;
|
|
|
|
uuid.uuid.uuid16 = data[0] + (data[1] << 8);
|
|
|
|
GAP_DBG_PRINTF(", "); print_uuid(&uuid);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
data = esp_bt_gap_resolve_eir_data((uint8_t *)prop->val, ESP_BT_EIR_TYPE_CMPL_32BITS_UUID, &len);
|
|
|
|
if (data == NULL) {
|
|
|
|
data = esp_bt_gap_resolve_eir_data((uint8_t *)prop->val, ESP_BT_EIR_TYPE_INCMPL_32BITS_UUID, &len);
|
|
|
|
}
|
|
|
|
if (data && len == ESP_UUID_LEN_32) {
|
|
|
|
uuid.len = len;
|
|
|
|
memcpy(&uuid.uuid.uuid32, data, sizeof(uint32_t));
|
|
|
|
GAP_DBG_PRINTF(", "); print_uuid(&uuid);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
data = esp_bt_gap_resolve_eir_data((uint8_t *)prop->val, ESP_BT_EIR_TYPE_CMPL_128BITS_UUID, &len);
|
|
|
|
if (data == NULL) {
|
|
|
|
data = esp_bt_gap_resolve_eir_data((uint8_t *)prop->val, ESP_BT_EIR_TYPE_INCMPL_128BITS_UUID, &len);
|
|
|
|
}
|
|
|
|
if (data && len == ESP_UUID_LEN_128) {
|
|
|
|
uuid.len = len;
|
|
|
|
memcpy(uuid.uuid.uuid128, (uint8_t *)data, len);
|
|
|
|
GAP_DBG_PRINTF(", "); print_uuid(&uuid);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
//try to find a name
|
|
|
|
if (name == NULL) {
|
|
|
|
data = esp_bt_gap_resolve_eir_data((uint8_t *)prop->val, ESP_BT_EIR_TYPE_CMPL_LOCAL_NAME, &len);
|
|
|
|
if (data == NULL) {
|
|
|
|
data = esp_bt_gap_resolve_eir_data((uint8_t *)prop->val, ESP_BT_EIR_TYPE_SHORT_LOCAL_NAME, &len);
|
|
|
|
}
|
|
|
|
if (data && len) {
|
|
|
|
name = data;
|
|
|
|
name_len = len;
|
|
|
|
GAP_DBG_PRINTF(", NAME: ");
|
|
|
|
for (int x = 0; x < len; x++) {
|
|
|
|
GAP_DBG_PRINTF("%c", (char)data[x]);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
GAP_DBG_PRINTF("\n");
|
|
|
|
|
|
|
|
if (cod->major == ESP_BT_COD_MAJOR_DEV_PERIPHERAL || (find_scan_result(disc_res->bda, bt_scan_results) != NULL)) {
|
|
|
|
add_bt_scan_result(disc_res->bda, cod, &uuid, name, name_len, rssi);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void handle_ble_device_result(struct ble_scan_result_evt_param *scan_rst)
|
|
|
|
{
|
|
|
|
|
|
|
|
uint16_t uuid = 0;
|
|
|
|
uint16_t appearance = 0;
|
|
|
|
char name[64] = {0};
|
|
|
|
|
|
|
|
uint8_t uuid_len = 0;
|
|
|
|
uint8_t *uuid_d = esp_ble_resolve_adv_data(scan_rst->ble_adv, ESP_BLE_AD_TYPE_16SRV_CMPL, &uuid_len);
|
|
|
|
if (uuid_d != NULL && uuid_len) {
|
|
|
|
uuid = uuid_d[0] + (uuid_d[1] << 8);
|
|
|
|
}
|
|
|
|
|
|
|
|
uint8_t appearance_len = 0;
|
|
|
|
uint8_t *appearance_d = esp_ble_resolve_adv_data(scan_rst->ble_adv, ESP_BLE_AD_TYPE_APPEARANCE, &appearance_len);
|
|
|
|
if (appearance_d != NULL && appearance_len) {
|
|
|
|
appearance = appearance_d[0] + (appearance_d[1] << 8);
|
|
|
|
}
|
|
|
|
|
|
|
|
uint8_t adv_name_len = 0;
|
|
|
|
uint8_t *adv_name = esp_ble_resolve_adv_data(scan_rst->ble_adv, ESP_BLE_AD_TYPE_NAME_CMPL, &adv_name_len);
|
|
|
|
|
|
|
|
if (adv_name == NULL) {
|
|
|
|
adv_name = esp_ble_resolve_adv_data(scan_rst->ble_adv, ESP_BLE_AD_TYPE_NAME_SHORT, &adv_name_len);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (adv_name != NULL && adv_name_len) {
|
|
|
|
memcpy(name, adv_name, adv_name_len);
|
|
|
|
name[adv_name_len] = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
GAP_DBG_PRINTF("BLE: " ESP_BD_ADDR_STR ", ", ESP_BD_ADDR_HEX(scan_rst->bda));
|
|
|
|
GAP_DBG_PRINTF("RSSI: %d, ", scan_rst->rssi);
|
|
|
|
GAP_DBG_PRINTF("UUID: 0x%04x, ", uuid);
|
|
|
|
GAP_DBG_PRINTF("APPEARANCE: 0x%04x, ", appearance);
|
|
|
|
GAP_DBG_PRINTF("ADDR_TYPE: '%s'", ble_addr_type_str(scan_rst->ble_addr_type));
|
|
|
|
if (adv_name_len) {
|
|
|
|
GAP_DBG_PRINTF(", NAME: '%s'", name);
|
|
|
|
}
|
|
|
|
GAP_DBG_PRINTF("\n");
|
|
|
|
|
|
|
|
if (uuid == ESP_GATT_UUID_HID_SVC) {
|
|
|
|
add_ble_scan_result(scan_rst->bda, scan_rst->ble_addr_type, appearance, adv_name, adv_name_len, scan_rst->rssi);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* BT GAP
|
|
|
|
* */
|
|
|
|
|
|
|
|
static void bt_gap_event_handler(esp_bt_gap_cb_event_t event, esp_bt_gap_cb_param_t *param)
|
|
|
|
{
|
|
|
|
switch (event) {
|
|
|
|
case ESP_BT_GAP_DISC_STATE_CHANGED_EVT: {
|
|
|
|
ESP_LOGV(TAG, "BT GAP DISC_STATE %s", (param->disc_st_chg.state == ESP_BT_GAP_DISCOVERY_STARTED) ? "START" : "STOP");
|
|
|
|
if (param->disc_st_chg.state == ESP_BT_GAP_DISCOVERY_STOPPED) {
|
|
|
|
SEND_BT_CB();
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
case ESP_BT_GAP_DISC_RES_EVT: {
|
|
|
|
handle_bt_device_result(¶m->disc_res);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
case ESP_BT_GAP_KEY_NOTIF_EVT:
|
|
|
|
ESP_LOGI(TAG, "BT GAP KEY_NOTIF passkey:%d", param->key_notif.passkey);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
ESP_LOGV(TAG, "BT GAP EVENT %s", bt_gap_evt_str(event));
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static esp_err_t init_bt_gap(void)
|
|
|
|
{
|
|
|
|
esp_err_t ret;
|
|
|
|
esp_bt_sp_param_t param_type = ESP_BT_SP_IOCAP_MODE;
|
|
|
|
esp_bt_io_cap_t iocap = ESP_BT_IO_CAP_IO;
|
|
|
|
esp_bt_gap_set_security_param(param_type, &iocap, sizeof(uint8_t));
|
|
|
|
/*
|
|
|
|
* Set default parameters for Legacy Pairing
|
|
|
|
* Use fixed pin code
|
|
|
|
*/
|
|
|
|
esp_bt_pin_type_t pin_type = ESP_BT_PIN_TYPE_FIXED;
|
|
|
|
esp_bt_pin_code_t pin_code;
|
2021-05-07 20:25:38 +00:00
|
|
|
pin_code[0] = '0';
|
|
|
|
pin_code[1] = '0';
|
|
|
|
pin_code[2] = '0';
|
|
|
|
pin_code[3] = '0';
|
2020-09-14 20:32:07 +00:00
|
|
|
esp_bt_gap_set_pin(pin_type, 4, pin_code);
|
|
|
|
|
|
|
|
if ((ret = esp_bt_gap_register_callback(bt_gap_event_handler)) != ESP_OK) {
|
|
|
|
ESP_LOGE(TAG, "esp_bt_gap_register_callback failed: %d", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
// Allow BT devices to connect back to us
|
|
|
|
if ((ret = esp_bt_gap_set_scan_mode(ESP_BT_CONNECTABLE, ESP_BT_NON_DISCOVERABLE)) != ESP_OK) {
|
|
|
|
ESP_LOGE(TAG, "esp_bt_gap_set_scan_mode failed: %d", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static esp_err_t start_bt_scan(uint32_t seconds)
|
|
|
|
{
|
|
|
|
esp_err_t ret = ESP_OK;
|
|
|
|
if ((ret = esp_bt_gap_start_discovery(ESP_BT_INQ_MODE_GENERAL_INQUIRY, (int)(seconds / 1.28), 0)) != ESP_OK) {
|
|
|
|
ESP_LOGE(TAG, "esp_bt_gap_start_discovery failed: %d", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* BLE GAP
|
|
|
|
* */
|
|
|
|
|
|
|
|
static void ble_gap_event_handler(esp_gap_ble_cb_event_t event, esp_ble_gap_cb_param_t *param)
|
|
|
|
{
|
|
|
|
switch (event) {
|
|
|
|
/*
|
|
|
|
* SCAN
|
|
|
|
* */
|
|
|
|
case ESP_GAP_BLE_SCAN_PARAM_SET_COMPLETE_EVT: {
|
|
|
|
ESP_LOGV(TAG, "BLE GAP EVENT SCAN_PARAM_SET_COMPLETE");
|
|
|
|
SEND_BLE_CB();
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
case ESP_GAP_BLE_SCAN_RESULT_EVT: {
|
|
|
|
esp_ble_gap_cb_param_t *scan_result = (esp_ble_gap_cb_param_t *)param;
|
|
|
|
switch (scan_result->scan_rst.search_evt) {
|
|
|
|
case ESP_GAP_SEARCH_INQ_RES_EVT: {
|
|
|
|
handle_ble_device_result(&scan_result->scan_rst);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
case ESP_GAP_SEARCH_INQ_CMPL_EVT:
|
|
|
|
ESP_LOGV(TAG, "BLE GAP EVENT SCAN DONE: %d", scan_result->scan_rst.num_resps);
|
|
|
|
SEND_BLE_CB();
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
case ESP_GAP_BLE_SCAN_STOP_COMPLETE_EVT: {
|
|
|
|
ESP_LOGV(TAG, "BLE GAP EVENT SCAN CANCELED");
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* ADVERTISEMENT
|
|
|
|
* */
|
|
|
|
case ESP_GAP_BLE_ADV_DATA_SET_COMPLETE_EVT:
|
|
|
|
ESP_LOGV(TAG, "BLE GAP ADV_DATA_SET_COMPLETE");
|
|
|
|
break;
|
|
|
|
|
|
|
|
case ESP_GAP_BLE_ADV_START_COMPLETE_EVT:
|
|
|
|
ESP_LOGV(TAG, "BLE GAP ADV_START_COMPLETE");
|
|
|
|
break;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* AUTHENTICATION
|
|
|
|
* */
|
|
|
|
case ESP_GAP_BLE_AUTH_CMPL_EVT:
|
|
|
|
if (!param->ble_security.auth_cmpl.success) {
|
|
|
|
ESP_LOGE(TAG, "BLE GAP AUTH ERROR: 0x%x", param->ble_security.auth_cmpl.fail_reason);
|
|
|
|
} else {
|
|
|
|
ESP_LOGI(TAG, "BLE GAP AUTH SUCCESS");
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
|
|
|
|
case ESP_GAP_BLE_KEY_EVT: //shows the ble key info share with peer device to the user.
|
|
|
|
ESP_LOGI(TAG, "BLE GAP KEY type = %s", esp_ble_key_type_str(param->ble_security.ble_key.key_type));
|
|
|
|
break;
|
|
|
|
|
|
|
|
case ESP_GAP_BLE_PASSKEY_NOTIF_EVT: // ESP_IO_CAP_OUT
|
|
|
|
// The app will receive this evt when the IO has Output capability and the peer device IO has Input capability.
|
|
|
|
// Show the passkey number to the user to input it in the peer device.
|
|
|
|
ESP_LOGI(TAG, "BLE GAP PASSKEY_NOTIF passkey:%d", param->ble_security.key_notif.passkey);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case ESP_GAP_BLE_NC_REQ_EVT: // ESP_IO_CAP_IO
|
|
|
|
// The app will receive this event when the IO has DisplayYesNO capability and the peer device IO also has DisplayYesNo capability.
|
|
|
|
// show the passkey number to the user to confirm it with the number displayed by peer device.
|
|
|
|
ESP_LOGI(TAG, "BLE GAP NC_REQ passkey:%d", param->ble_security.key_notif.passkey);
|
|
|
|
esp_ble_confirm_reply(param->ble_security.key_notif.bd_addr, true);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case ESP_GAP_BLE_PASSKEY_REQ_EVT: // ESP_IO_CAP_IN
|
|
|
|
// The app will receive this evt when the IO has Input capability and the peer device IO has Output capability.
|
|
|
|
// See the passkey number on the peer device and send it back.
|
|
|
|
ESP_LOGI(TAG, "BLE GAP PASSKEY_REQ");
|
|
|
|
//esp_ble_passkey_reply(param->ble_security.ble_req.bd_addr, true, 1234);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case ESP_GAP_BLE_SEC_REQ_EVT:
|
|
|
|
ESP_LOGI(TAG, "BLE GAP SEC_REQ");
|
|
|
|
// Send the positive(true) security response to the peer device to accept the security request.
|
|
|
|
// If not accept the security request, should send the security response with negative(false) accept value.
|
|
|
|
esp_ble_gap_security_rsp(param->ble_security.ble_req.bd_addr, true);
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
ESP_LOGV(TAG, "BLE GAP EVENT %s", ble_gap_evt_str(event));
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static esp_err_t init_ble_gap(void)
|
|
|
|
{
|
|
|
|
esp_err_t ret;
|
|
|
|
|
|
|
|
if ((ret = esp_ble_gap_register_callback(ble_gap_event_handler)) != ESP_OK) {
|
|
|
|
ESP_LOGE(TAG, "esp_ble_gap_register_callback failed: %d", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static esp_ble_scan_params_t hid_scan_params = {
|
|
|
|
.scan_type = BLE_SCAN_TYPE_ACTIVE,
|
|
|
|
.own_addr_type = BLE_ADDR_TYPE_PUBLIC,
|
|
|
|
.scan_filter_policy = BLE_SCAN_FILTER_ALLOW_ALL,
|
|
|
|
.scan_interval = 0x50,
|
|
|
|
.scan_window = 0x30,
|
|
|
|
.scan_duplicate = BLE_SCAN_DUPLICATE_ENABLE,
|
|
|
|
};
|
|
|
|
|
|
|
|
static esp_err_t start_ble_scan(uint32_t seconds)
|
|
|
|
{
|
|
|
|
esp_err_t ret = ESP_OK;
|
|
|
|
if ((ret = esp_ble_gap_set_scan_params(&hid_scan_params)) != ESP_OK) {
|
|
|
|
ESP_LOGE(TAG, "esp_ble_gap_set_scan_params failed: %d", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
WAIT_BLE_CB();
|
|
|
|
|
|
|
|
if ((ret = esp_ble_gap_start_scanning(seconds)) != ESP_OK) {
|
|
|
|
ESP_LOGE(TAG, "esp_ble_gap_start_scanning failed: %d", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
esp_err_t esp_hid_ble_gap_adv_init(uint16_t appearance, const char *device_name)
|
|
|
|
{
|
|
|
|
|
|
|
|
esp_err_t ret;
|
|
|
|
|
|
|
|
const uint8_t hidd_service_uuid128[] = {
|
|
|
|
0xfb, 0x34, 0x9b, 0x5f, 0x80, 0x00, 0x00, 0x80, 0x00, 0x10, 0x00, 0x00, 0x12, 0x18, 0x00, 0x00,
|
|
|
|
};
|
|
|
|
|
|
|
|
esp_ble_adv_data_t ble_adv_data = {
|
|
|
|
.set_scan_rsp = false,
|
|
|
|
.include_name = true,
|
|
|
|
.include_txpower = true,
|
|
|
|
.min_interval = 0x0006, //slave connection min interval, Time = min_interval * 1.25 msec
|
|
|
|
.max_interval = 0x0010, //slave connection max interval, Time = max_interval * 1.25 msec
|
|
|
|
.appearance = appearance,
|
|
|
|
.manufacturer_len = 0,
|
|
|
|
.p_manufacturer_data = NULL,
|
|
|
|
.service_data_len = 0,
|
|
|
|
.p_service_data = NULL,
|
|
|
|
.service_uuid_len = sizeof(hidd_service_uuid128),
|
|
|
|
.p_service_uuid = (uint8_t *)hidd_service_uuid128,
|
|
|
|
.flag = 0x6,
|
|
|
|
};
|
|
|
|
|
|
|
|
esp_ble_auth_req_t auth_req = ESP_LE_AUTH_REQ_SC_MITM_BOND;
|
2021-08-20 09:32:41 +00:00
|
|
|
esp_ble_io_cap_t iocap = ESP_IO_CAP_OUT;//you have to enter the key on the host
|
2020-09-14 20:32:07 +00:00
|
|
|
//esp_ble_io_cap_t iocap = ESP_IO_CAP_IN;//you have to enter the key on the device
|
2021-08-20 09:32:41 +00:00
|
|
|
//esp_ble_io_cap_t iocap = ESP_IO_CAP_IO;//you have to agree that key matches on both
|
2020-09-14 20:32:07 +00:00
|
|
|
//esp_ble_io_cap_t iocap = ESP_IO_CAP_NONE;//device is not capable of input or output, unsecure
|
|
|
|
uint8_t init_key = ESP_BLE_ENC_KEY_MASK | ESP_BLE_ID_KEY_MASK;
|
|
|
|
uint8_t rsp_key = ESP_BLE_ENC_KEY_MASK | ESP_BLE_ID_KEY_MASK;
|
|
|
|
uint8_t key_size = 16; //the key size should be 7~16 bytes
|
2021-08-20 09:32:41 +00:00
|
|
|
uint32_t passkey = 484848;//ESP_IO_CAP_OUT
|
2020-09-14 20:32:07 +00:00
|
|
|
|
|
|
|
if ((ret = esp_ble_gap_set_security_param(ESP_BLE_SM_AUTHEN_REQ_MODE, &auth_req, 1)) != ESP_OK) {
|
|
|
|
ESP_LOGE(TAG, "GAP set_security_param AUTHEN_REQ_MODE failed: %d", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((ret = esp_ble_gap_set_security_param(ESP_BLE_SM_IOCAP_MODE, &iocap, 1)) != ESP_OK) {
|
|
|
|
ESP_LOGE(TAG, "GAP set_security_param IOCAP_MODE failed: %d", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((ret = esp_ble_gap_set_security_param(ESP_BLE_SM_SET_INIT_KEY, &init_key, 1)) != ESP_OK) {
|
|
|
|
ESP_LOGE(TAG, "GAP set_security_param SET_INIT_KEY failed: %d", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((ret = esp_ble_gap_set_security_param(ESP_BLE_SM_SET_RSP_KEY, &rsp_key, 1)) != ESP_OK) {
|
|
|
|
ESP_LOGE(TAG, "GAP set_security_param SET_RSP_KEY failed: %d", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((ret = esp_ble_gap_set_security_param(ESP_BLE_SM_MAX_KEY_SIZE, &key_size, 1)) != ESP_OK) {
|
|
|
|
ESP_LOGE(TAG, "GAP set_security_param MAX_KEY_SIZE failed: %d", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((ret = esp_ble_gap_set_security_param(ESP_BLE_SM_SET_STATIC_PASSKEY, &passkey, sizeof(uint32_t))) != ESP_OK) {
|
|
|
|
ESP_LOGE(TAG, "GAP set_security_param SET_STATIC_PASSKEY failed: %d", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((ret = esp_ble_gap_set_device_name(device_name)) != ESP_OK) {
|
|
|
|
ESP_LOGE(TAG, "GAP set_device_name failed: %d", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((ret = esp_ble_gap_config_adv_data(&ble_adv_data)) != ESP_OK) {
|
|
|
|
ESP_LOGE(TAG, "GAP config_adv_data failed: %d", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
esp_err_t esp_hid_ble_gap_adv_start(void)
|
|
|
|
{
|
|
|
|
static esp_ble_adv_params_t hidd_adv_params = {
|
|
|
|
.adv_int_min = 0x20,
|
|
|
|
.adv_int_max = 0x30,
|
|
|
|
.adv_type = ADV_TYPE_IND,
|
|
|
|
.own_addr_type = BLE_ADDR_TYPE_PUBLIC,
|
|
|
|
.channel_map = ADV_CHNL_ALL,
|
|
|
|
.adv_filter_policy = ADV_FILTER_ALLOW_SCAN_ANY_CON_ANY,
|
|
|
|
};
|
|
|
|
return esp_ble_gap_start_advertising(&hidd_adv_params);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* CONTROLLER INIT
|
|
|
|
* */
|
|
|
|
|
|
|
|
static esp_err_t init_low_level(uint8_t mode)
|
|
|
|
{
|
|
|
|
esp_err_t ret;
|
|
|
|
esp_bt_controller_config_t bt_cfg = BT_CONTROLLER_INIT_CONFIG_DEFAULT();
|
|
|
|
if (mode & ESP_BT_MODE_CLASSIC_BT) {
|
|
|
|
bt_cfg.mode = mode;
|
|
|
|
bt_cfg.bt_max_acl_conn = 3;
|
|
|
|
bt_cfg.bt_max_sync_conn = 3;
|
|
|
|
} else {
|
|
|
|
ret = esp_bt_controller_mem_release(ESP_BT_MODE_CLASSIC_BT);
|
|
|
|
if (ret) {
|
|
|
|
ESP_LOGE(TAG, "esp_bt_controller_mem_release failed: %d", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
ret = esp_bt_controller_init(&bt_cfg);
|
|
|
|
if (ret) {
|
|
|
|
ESP_LOGE(TAG, "esp_bt_controller_init failed: %d", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = esp_bt_controller_enable(mode);
|
|
|
|
if (ret) {
|
|
|
|
ESP_LOGE(TAG, "esp_bt_controller_enable failed: %d", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = esp_bluedroid_init();
|
|
|
|
if (ret) {
|
|
|
|
ESP_LOGE(TAG, "esp_bluedroid_init failed: %d", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = esp_bluedroid_enable();
|
|
|
|
if (ret) {
|
|
|
|
ESP_LOGE(TAG, "esp_bluedroid_enable failed: %d", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (mode & ESP_BT_MODE_CLASSIC_BT) {
|
|
|
|
ret = init_bt_gap();
|
|
|
|
if (ret) {
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (mode & ESP_BT_MODE_BLE) {
|
|
|
|
ret = init_ble_gap();
|
|
|
|
if (ret) {
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
esp_err_t esp_hid_gap_init(uint8_t mode)
|
|
|
|
{
|
|
|
|
esp_err_t ret;
|
|
|
|
if (!mode || mode > ESP_BT_MODE_BTDM) {
|
|
|
|
ESP_LOGE(TAG, "Invalid mode given!");
|
|
|
|
return ESP_FAIL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (bt_hidh_cb_semaphore != NULL) {
|
|
|
|
ESP_LOGE(TAG, "Already initialised");
|
|
|
|
return ESP_FAIL;
|
|
|
|
}
|
|
|
|
|
|
|
|
bt_hidh_cb_semaphore = xSemaphoreCreateBinary();
|
|
|
|
if (bt_hidh_cb_semaphore == NULL) {
|
|
|
|
ESP_LOGE(TAG, "xSemaphoreCreateMutex failed!");
|
|
|
|
return ESP_FAIL;
|
|
|
|
}
|
|
|
|
|
|
|
|
ble_hidh_cb_semaphore = xSemaphoreCreateBinary();
|
|
|
|
if (ble_hidh_cb_semaphore == NULL) {
|
|
|
|
ESP_LOGE(TAG, "xSemaphoreCreateMutex failed!");
|
|
|
|
vSemaphoreDelete(bt_hidh_cb_semaphore);
|
|
|
|
bt_hidh_cb_semaphore = NULL;
|
|
|
|
return ESP_FAIL;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = init_low_level(mode);
|
|
|
|
if (ret != ESP_OK) {
|
|
|
|
vSemaphoreDelete(bt_hidh_cb_semaphore);
|
|
|
|
bt_hidh_cb_semaphore = NULL;
|
|
|
|
vSemaphoreDelete(ble_hidh_cb_semaphore);
|
|
|
|
ble_hidh_cb_semaphore = NULL;
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ESP_OK;
|
|
|
|
}
|
|
|
|
|
|
|
|
esp_err_t esp_hid_scan(uint32_t seconds, size_t *num_results, esp_hid_scan_result_t **results)
|
|
|
|
{
|
|
|
|
if (num_bt_scan_results || bt_scan_results || num_ble_scan_results || ble_scan_results) {
|
|
|
|
ESP_LOGE(TAG, "There are old scan results. Free them first!");
|
|
|
|
return ESP_FAIL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (start_ble_scan(seconds) == ESP_OK) {
|
|
|
|
if (start_bt_scan(seconds) == ESP_OK) {
|
|
|
|
WAIT_BT_CB();
|
|
|
|
}
|
|
|
|
WAIT_BLE_CB();
|
|
|
|
} else {
|
|
|
|
return ESP_FAIL;
|
|
|
|
}
|
|
|
|
|
|
|
|
*num_results = num_bt_scan_results + num_ble_scan_results;
|
|
|
|
*results = bt_scan_results;
|
|
|
|
if (num_bt_scan_results) {
|
|
|
|
while (bt_scan_results->next != NULL) {
|
|
|
|
bt_scan_results = bt_scan_results->next;
|
|
|
|
}
|
|
|
|
bt_scan_results->next = ble_scan_results;
|
|
|
|
} else {
|
|
|
|
*results = ble_scan_results;
|
|
|
|
}
|
|
|
|
|
|
|
|
num_bt_scan_results = 0;
|
|
|
|
bt_scan_results = NULL;
|
|
|
|
num_ble_scan_results = 0;
|
|
|
|
ble_scan_results = NULL;
|
|
|
|
return ESP_OK;
|
|
|
|
}
|