Macintosh-HW/tashtwenty
1
0
Fork 0
mirror of https://github.com/lampmerchant/tashtwenty.git synced 2024-11-28 15:49:18 +00:00
Code Issues Projects Releases Wiki Activity

update README.md with particulars of PIC16F1704 firmware

Browse Source
This commit is contained in:
lampmerchant 2022-04-21 18:14:04 -06:00 committed by GitHub
parent 39f9c801b1
commit 70cf1e5b88
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 44 additions and 30 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

74
README.md
View File

@ -2,12 +2,9 @@
## Elevator Pitch
It's a DCD (the interface used by the Hard Disk 20 to plug in through the disk port) interface, contained entirely within a PIC16F1825
(14 pins, ~$1.70) microcontroller. It bit-bangs the low-level IWM protocol using the read/write and phase lines on the "DB"-19 disk
port, no programmable logic devices of any kind required.
It's a DCD (the interface used by the Hard Disk 20 to plug in through the disk port) interface, contained entirely within a PIC16F1825 (14 pins, ~$1.84) or PIC16F1704 (14 pins, ~$1.39) microcontroller. It bit-bangs the low-level IWM protocol using the read/write and phase lines on the "DB"-19 disk port, no programmable logic devices of any kind required.
It interfaces to an MMC card and can emulate up to four DCD devices. It also has an enable output which can be used to
chain more DCD devices (though Mac OS only supports a total of four) and a floppy disk drive.
It interfaces to an MMC or compatible card and can emulate up to four DCD devices. It also has an enable output which can be used to chain more DCD devices (though ROMs only support a maximum of four) and a floppy disk drive.
(Despite the name, there is nothing limiting it to 20 megabytes.)
@ -19,42 +16,59 @@ Functional, though not rigorously tested.
## Caveats
Due to the dearth of documentation on the DCD protocol (see below), the protocol only implements the commands whose formats are known,
namely read, write, and device identification. Responses to other commands are faked. Fortunately, this seems to be enough for the
device to function properly, including formatting.
Due to the dearth of documentation on the DCD protocol (see below), the protocol only implements the commands whose formats are known, namely read, write, and device identification. Responses to other commands are faked. Fortunately, this seems to be enough for the device to function properly, including formatting.
The disk drive interface relies on use of the phase lines to read and write one-bit registers. Because the microcontroller mimics the register set in code instead of programmable logic, it has a response time that is, in the worst case, approximately one microsecond. This may interfere with its compatibility with faster Macs, though it is not known to do so at this point.
The disk drive interface relies on use of the phase lines to read and write one-bit registers. Because the PIC16F1825 firmware mimics the register set in code instead of programmable logic, it has a response time that is, in the worst case, approximately one microsecond. This may interfere with the ability of faster Macs to detect it, though it is not known to do so at this point. The PIC16F1704 firmware mimics the register set in logic and responds in effect instantly.
Certain Macs may have a limitation imposed by their ROM on the number of DCDs they support.
Known Compatible Macs:
* With up to four devices:
* 512ke
* Plus
* With up to two devices (chaining more than two causes only first to be recognized):
* Classic II
Suspected Compatible Macs:
* With up to four devices:
* 512k (with Hard Disk 20 extension)
* With up to two devices:
* SE
* Classic
* Portable
* IIci
* IIsi
* LC (using internal secondary drive connector, if stuffed)
* LC II (using floppy connector and clip onto !ENBL2 on SWIM IC)
* IIx (using internal secondary drive connector) (requires nonstandard ROM)
* IIcx (requires nonstandard ROM)
* SE/30 (requires nonstandard ROM)
### Compatibility Matrix
| Macintosh | PIC16F1825 | PIC16F1704 |
| ---------- | ---------- | ---------- |
| 512k¶ | 4? | 4? |
| 512ke | 4 | 4 |
| Plus | 4 | 4? |
| SE | 2? | 2? |
| Classic | 2? | 2? |
| Portable | 2? | 2? |
| IIci | 2? | 2? |
| IIsi | 2? | 2? |
| LC† | 2? | 2? |
| LC II§ | 2? | 2? |
| IIx†‡ | 2? | 2? |
| IIcx‡ | 2? | 2? |
| SE/30‡ | 2? | 2? |
| Classic II | 2 | 2 |
? Suspected, but not known to have been tested
¶ Requires Hard Disk 20 patch file (often erroneously called the Hard Disk 20 INIT)
§ Requires clipping onto the !ENBL2 pin of the SWIM IC
† Requires use of the secondary internal floppy drive header
‡ Requires use of a nonstandard ROM
## Technical Details
### MMC Card Format
The MMC card must have an MBR (Master Boot Record) aka DOS-type partition table with up to four primary partitions of type 0xAF (HFS). Partitions of other types will be ignored. Extended partitions are not supported.
The MMC card must have an MBR (Master Boot Record) aka DOS-type partition table with up to four primary partitions of type 0xAF (HFS). Extended partitions are not supported.
#### Custom Icons
In the PIC16F1704 firmware, custom icons are supported using other values besides 0xAF for the partition type byte. Other partition types besides 0xAF must be the number of a sector (for example, a partition of type 0x01 would point to the second sector) on the card formatted as follows:
* Bytes 0-255 must be the word "ICON" repeated 64 times.
* Bytes 256-383 must be a 32x32 icon, one bit per pixel, with '1' bits denoting black and '0' bits denoting white.
* Bytes 384-511 must be a 32x32 icon mask, one bit per pixel, with '1' bits denoting opaque and '0' bits denoting transparent.
If the sector is not in this format, the partition will be ignored, in order to safely support cards with non-HFS partitions. Partitions of type 0xAF will always use the built-in icon and the hundred-seventy-sixth sector will not be checked for the format described above.
### DCD (Directly Connected Disks) Protocol