PCB board rev 1.2: fix LED positions

pcb/TashTwenty Tiny/ChangeLog.md

@@ -1,2 +1,8 @@
+## v1.2
+- moved the LEDs a little outward to better fit the new panels
+
+## v1.1
+- fixed R2 silkscreen
+
 ## v1.0
 - Initial public release

pcb/TashTwenty Tiny/README.md

@@ -55,13 +55,16 @@ Here us a digikey (without the case):
 
 ### IDC cable
 You need a cable to connect both boards
-Any straight IDC-20 cable should work (pin 1 to pin 1, etc). Macintosh floppy cables are compatible. We used a Quadra 800 cable for prototyping (Apple P/N 590-0862-B).
+Any straight IDC-20 cable should work (pin 1 to pin 1, etc). Macintosh floppy cables are compatible. We used a few Apple cables for prototyping:
+- Quadra 800 (Apple P/N 590-0862-B)
+- PowerMac 7200-7600 (Apple P/N 590-4529-A)
+
 If you are looking for a new one, a compatible assembly is made buy Advantech under the part number PCL-10120-1E.
 
 ## PCBs
 the PCBs are simple 2 layers boards. The gerbers are avaible in the release section.
 Check for the following files:
-* TTT_11.zip: main board revision 1.1
+* TTT_12.zip: main board revision 1.2
 * DB19_IDC20.zip: adapter board revision 1.0
 
 You should be use any mainstream PCB manufacturer for theses. Nothing special about them. PCB thickness should FR-4 with a 1.6mm thickness

pcb/TashTwenty Tiny/TashTwenty Tiny.sch

@@ -5,8 +5,8 @@ $Descr A4 11693 8268
 encoding utf-8
 Sheet 1 3
 Title "TashTwenty Tiny"
-Date "2022-05-21"
-Rev "1.1"
+Date "2022-06-06"
+Rev "1.2"
 Comp "Lostwave"
 Comment1 "https://68kmla.org"
 Comment2 "https://68kmla.org/bb/index.php?threads/tashtwenty-single-chip-dcd-hard-disk-20-interface.39357/"
@@ -441,4 +441,6 @@ Wire Wire Line
 	9850 6000 9850 5600
 Wire Wire Line
 	9850 5600 9750 5600
+Text Notes 4300 6350 0    50   ~ 0
+PIC1704 is now recommended.\nPIC1825 still supported.
 $EndSCHEMATC