From dc9796647c38f80c4da887f58917888839512754 Mon Sep 17 00:00:00 2001 From: demik Date: Tue, 10 May 2022 09:24:14 +0200 Subject: [PATCH] added Ribbon Cable P/N --- pcb/TashTwenty Tiny/README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/pcb/TashTwenty Tiny/README.md b/pcb/TashTwenty Tiny/README.md index 336e2f9..d348b01 100644 --- a/pcb/TashTwenty Tiny/README.md +++ b/pcb/TashTwenty Tiny/README.md @@ -45,7 +45,6 @@ This is a matching board for TashTwenty. Please use this one to avoid any damage | J1 | IDC20 | 1 | IDC 2x10 Header | BLK 10120560 | | J2 | DB19 | 1 | DB19 wire male connector | Good luck. | - ### BOM (external links) Here is a mouser link (without the case): - https://www.mouser.fr/ProjectManager/ProjectDetail.aspx?AccessID=13c3076e24 @@ -53,6 +52,7 @@ Here is a mouser link (without the case): ### IDC cable You need a cable to connect both boards Any straight IDC-20 cable should work (pin 1 to pin 1, etc). Macintosh floppy cables are compatible. We used a Quadra 800 cable for prototyping (Apple P/N 590-0862-B). +If you are looking for a new one, a compatible assembly is made buy Advantech under the part number PCL-10120-1E. ## PCBs the PCBs are simple 2 layers boards. The gerbers are avaible in the release section.