BuildCubeE/MPW-3.2.3/Scripts/DoIt

#
#	NAME:
#		DoIt
#
#	SYNTAX:
#		DoIt (CommandFile [-echo] [-dump]) | [-selection]
#
#	SYNOPSIS:
#		DoIt will execute a series of shell commands hilighting each command
#		as it is executed.  The commands can be in either a file or the
#		current selection.  If a CommandFile is passed to doit the file is
#		opened (as the active window) and each line (multiple lines if a "∂"
#		is present at the end of a line) is executed.  The window
#		is closed when all the commands have been processed.
#
#	OPTIONS:
#		-e[cho]			Each command is echo to the Worksheet before execution.
#		-d[ump]			If an error occurs in one of the commands all the
#							remaining commands (including the command that failed)
#							are written to the Worksheet and marked by "ToDo".
#		-s[election]	Execute the commands in the current selection.
#
#	SPECIAL NOTE:
#		The initial overhead is fairly substantial (on a MacPlus) when executing
#		commands from the current selection.  For a 10 line selection it takes
#		26 seconds of "pre-processing" before DoIt starts to execute the
#		first command.  If the same 10 lines were in a file the overhead is
#		only 11 seconds.  Once execution begins the overhead is small in either
#		case.
#
#		This script does not work correctly on structured commands.
#
#	AUTHOR:
#		Peter J. Potrebic
#		Copyright Apple Computer, Inc. 1988-1990
#		All Rights Reserved.
#

Unset ErrFile
Unset CommandFile
Unset EchoCmds
Unset DumpCmds
Unset CurSel

Set OldExit {Exit}
Set Cmd "{0}"
Set Syntax "(CommandFile [-echo] [-dump]) | [-selection]"
Set Error 0

For Arg In {"Parameters"}								# Parse the command line

	# Checking for the echo option - echo commands before they are executed
	If "{Arg}" == "-e" || "{Arg}" == "-echo"
		If {EchoCmds} == 0
			Set EchoCmds 1
		Else
			Echo "### {Cmd} - option ∂"{Arg}∂" multiply defined"
			Set Error 1
		End

	# Checking for the dump option - echo unexecuted commands after error
	Else If "{Arg}" == "-d" || "{Arg}" == "-dump"
		If {DumpCmds} == 0
			Set DumpCmds 1
		Else
			Echo "### {Cmd} - option ∂"{Arg}∂" multiply defined"
			Set Error 1
		End

	# Checking for the selection option - commands are in the current selection
	Else If "{Arg}" == "-s" || "{Arg}" == "-selection"
		If {CurSel} == 0
			Set CurSel 1
		Else
			Echo "### {Cmd} - option ∂"{Arg}∂" multiply defined"
			Set Error 1
		End

	# Found unknown option
	Else If "{Arg}" =~ /-≈/ || "{Arg}" == -
		Echo "### {Cmd} - ∂"{Arg}∂" is not an option"
		Set Error 1

	# Found the command file
	Else
		If "{CommandFile}" == 0
			Set CommandFile "{Arg}"
		Else
			Echo "### {Cmd} - Too many parameters were specified."
			Set Error 1
		End
	End
End > Dev:StdErr

If {CurSel} && ({DumpCmds} || {EchoCmds})
	Echo "### {Cmd} - conflicting options were specified"
	Set Error 1
End > Dev:StdErr

If ("{CommandFile}" == "" && !{CurSel})
	Echo "### {Cmd} - No command file specified"
	Set Error 1
End > Dev:StdErr

If {Error}													# Were there any syntax errors?
	Echo "# Usage - {Cmd} {Syntax}"
	Exit {Error}											# Exiting (because of syntax error)
End > Dev:StdErr

Set Exit 0													# we’ll handle the errors, thank you

#
#				EXECUTING THE CURRENT SELECTION...
#
If {CurSel}
	Set MyActive "{Active}"
	Mark -y § DoIt "{MyActive}"						# mark all the commands to be executed
	Set NumCmds `Count -l "{MyActive}".§`

	If {NumCmds} > 0
		Set NumEscapes `Search -q /≈∂∂∞/ "{MyActive}".§ ≥ Dev:Null | Count -l`
		Evaluate NumCmds = {NumCmds} - {NumEscapes}

		Find ∆DoIt "{MyActive}"							# Goto top of Commands to be executed

		Set cCmd 0											# Initialize command counter
		Loop
			Find /•/ "{MyActive}"						# Find beginning of next line
			Find §:/[¬∂∂]∞/ "{MyActive}"				# Find from § to end of command
			Evaluate cCmd += 1							# Increment command counter
			Execute "{MyActive}".§						# Execute the command
			Set commandStatus {Status}
			If {commandStatus} ≠ 0
				Set Error {commandStatus}					# Capture and save status
			End
			Break If (({OldExit} && {Error} ≠ 0) || {cCmd} == {NumCmds})
		End
		Find §!1 "{MyActive}"							# go to line after last command
	End
	UnMark DoIt "{MyActive}"

#
#				EXECUTING FROM A FILE...
#
Else
	Set ToDo "#### Still ToDo… ####"
	Set FullCommandFile "`Files -i -f "{CommandFile}"`"
	Set WasOpen `Evaluate "∂`Windows∂`" =~ /≈{FullCommandFile}≈/`
	Open "{CommandFile}"									# Open command file
	Exit {Status} If {Status} ≠ 0
	Find • "{CommandFile}"								# Goto top of File to be executed
	Loop														# Loop through all commands
		Find /•/ "{CommandFile}"						# Find beginning of next line
		Break If {Status}	≠ 0							# At end of file
		Find §:/[¬∂∂]∞/ "{CommandFile}"				# Find from § to end of command
		Break If {Status}	≠ 0							# At end of file
		If {EchoCmds}
			Begin
				Catenate "{CommandFile}".§				# Write command to Standard Output
				Echo											# Echo a newline after the command
			End >> "{Worksheet}".§
		End
		Execute "{CommandFile}".§						# Execute the command
		Set commandStatus {Status}
		If {commandStatus} ≠ 0
			Set Error {commandStatus}					# Capture and save status
		End
		If {Error} ≠ 0										# There was an error
			If {DumpCmds}									# List the commands left to execute
				Begin
					Echo "{ToDo}"							# List includes the command that failed
					Find §:∞ "{CommandFile}"			# Select the unexecuted commands
					Catenate "{CommandFile}".§			# Write commands to Standard Output
					Echo
				End >> "{Worksheet}".§
				Mark -y § ToDo "{Worksheet}"			# Mark the commands that weren't executed
			End
			Break If {OldExit}
		End
	End

	If ¬{WasOpen}
		Close "{CommandFile}" ≥ Dev:Null				# Close the command file
	End
End
Exit "{Error}"												# return with proper status