EMILE/second/serial.c
Laurent Vivier 9bd9755dbb Update email address
Signed-off-by: Laurent Vivier <Laurent@Vivier.EU>
2013-09-05 14:45:27 +02:00

293 lines
4.2 KiB
C

/*
*
* (c) 2004 Laurent Vivier <Laurent@Vivier.EU>
*
*/
#include <stdio.h>
#include <unistd.h>
#include <sys/types.h>
#include <macos/types.h>
#include <macos/devices.h>
#include <macos/serial.h>
#include "misc.h"
#include "head.h"
#include "driver.h"
#include "config.h"
#include "serial.h"
static short out_refnum[SERIAL_PORT_NB];
#ifdef USE_CLI
static short in_refnum[SERIAL_PORT_NB];
static char buffer;
#endif
/*
* Technical Note TN1119 "Serial Port Apocrypha"
*
* from http://developer.apple.com/technotes/tn/tn1119.html
*
* Inside Macintosh, Devices, "Using the Serial Driver" :
*
* http://developer.apple.com/documentation/mac/Devices/Devices-315.html
*
*/
/*
*
* ".AOut" Serial port A (modem) output
* ".AIn" Serial port A (modem) input
* ".BOut" Serial port B (printer) output
* ".BIn" Serial port B (printer) input
*
*/
static int setserial(short refNum, unsigned int bitrate, unsigned int datasize,
int parity, int stopbits)
{
CntrlParam param;
short seropts;
int res;
switch(bitrate)
{
case 150:
seropts = baud150;
break;
case 300:
seropts = baud300;
break;
case 600:
seropts = baud600;
break;
case 1200:
seropts = baud1200;
break;
case 1800:
seropts = baud1800;
break;
case 2400:
seropts = baud2400;
break;
case 3600:
seropts = baud3600;
break;
case 4800:
seropts = baud3600;
break;
case 7200:
seropts = baud7200;
break;
case 9600:
seropts = baud9600;
break;
case 14400:
seropts = baud14400;
break;
case 19200:
seropts = baud19200;
break;
case 28800:
seropts = baud28800;
break;
case 38400:
seropts = baud38400;
break;
case 57600:
seropts = baud57600;
break;
default:
seropts = baud9600;
break;
}
switch(datasize)
{
case 5:
seropts |= data5;
break;
case 6:
seropts |= data6;
break;
case 7:
seropts |= data7;
break;
case 8:
seropts |= data8;
break;
default:
seropts |= data8;
break;
}
switch(parity)
{
case 0:
seropts |= noParity;
break;
case 1:
seropts |= oddParity;
break;
case 2:
seropts |= evenParity;
break;
}
switch(stopbits)
{
case 0:
seropts |= stop10;
break;
case 1:
seropts |= stop15;
break;
case 2:
seropts |= stop20;
break;
}
param.csCode = kSERDConfiguration;
param.csParam[0] = seropts;
param.ioCRefNum = refNum;
param.ioVRefNum = 0;
param.ioCompletion = 0;
res = PBControlSync((ParmBlkPtr)&param);
return res;
}
int serial_is_available(unsigned int port)
{
if (port > SERIAL_PORT_NB)
return 0;
if (out_refnum[port] == -1)
return 0;
return 1;
}
void serial_put(unsigned int port, char c)
{
if (!serial_is_available(port))
return;
if ( c == '\n' )
write(out_refnum[port], "\n\r", 2);
else
write(out_refnum[port], &c, 1);
}
void serial_init(void)
{
out_refnum[SERIAL_MODEM_PORT] = -1;
in_refnum[SERIAL_MODEM_PORT] = -1;
out_refnum[SERIAL_PRINTER_PORT] = -1;
in_refnum[SERIAL_PRINTER_PORT] = -1;
#ifdef USE_CLI
buffer = 0;
#endif
}
void serial_enable(int port, int bitrate, int parity, int datasize, int stopbits)
{
int res;
res = OpenDriver(c2pstring(".AOut"),
&out_refnum[port]);
if (res != noErr) {
printf("Cannot open output port (%d)\n", res);
}
else
{
res = setserial(out_refnum[port],
bitrate,
datasize,
parity,
stopbits);
if (res != noErr) {
printf("Cannot setup output port (%d)\n",
res);
}
}
#ifdef USE_CLI
res = OpenDriver(c2pstring(".AIn"),
&in_refnum[port]);
if (res != noErr) {
printf("Cannot open modem input port (%d)\n", res);
}
else
{
res = setserial(in_refnum[port], bitrate,
datasize,
parity,
stopbits);
if (res != noErr) {
printf("Cannot setup modem input port (%d)\n",
res);
}
}
#endif /* USE_CLI */
}
#ifdef USE_CLI
int serial_getchar(unsigned int port)
{
int count;
char c;
if (!serial_is_available(port))
return 0;
if (buffer != 0)
{
c = buffer;
buffer = 0;
return c;
}
count = read(in_refnum[port], &c, 1);
if (count == 1)
return c;
return 0;
}
int serial_keypressed(unsigned int port)
{
int c;
c = serial_getchar(port);
if (c != 0)
{
buffer = c;
return 1;
}
return 0;
}
#endif