EMILE is a 680x0 Macintosh bootloader
Go to file
2005-02-02 14:47:49 +00:00
first Add SCSI support 2004-12-07 00:35:33 +00:00
libemile add emile_checksum, emile_map_get_bootinfo, emile_map_dev 2005-02-02 14:33:24 +00:00
second Remove duplicate shift of logical address for DT_VALID_4_BYTE in decode_4_PD() and decode_8_PD() 2005-01-03 01:07:49 +00:00
tools Add --get-driver 2005-02-02 14:47:49 +00:00
AUTHORS Initial revision 2004-02-15 20:46:45 +00:00
ChangeLog update with PowerBook 150 bugs correction 2005-01-03 01:15:27 +00:00
COPYING Initial revision 2004-02-15 20:46:45 +00:00
Makefile disable floppy eject for my USB floppy device, add a parameter, CONSOLE, to enable or not serial console 2005-01-25 23:25:38 +00:00
README Initial revision 2004-02-15 20:46:45 +00:00
README.floppy some Howto about EMILE on a floppy 2004-12-27 22:43:05 +00:00
README.scsi first revision 2004-12-27 23:06:38 +00:00

			EMILE 0.1
		(C) 2004 Laurent Vivier

	All files are distributed under the terms of GPL license. See COPYING.

This tool allows to generate a floppy bootable on early macintoshes (680x0 
based macintoshes).

In the booter, is embedded the kernel found in top directory under the name of 
"vmlinux". It has been generated previously in linux source tree with 
"make vmlinux". If a ramdisk (ramdisk.gz) is found, it is also added in
the floppy image.

Type "make" to generate the floppy image (floppy.img).

To write the image to floppy you can type "make dump".

This work is based on the penguin booter for mac68k, on linux kernel, and 
perhaps on the ppc booter BootX.

Some problems can appear when there is no physical memory in the first bank.

All mechanisms found in "penguin" have not been implemented in EMILE.
You can ask me if one is missing for you :-P

This work has only be tested on a MacIIci with 8 x 4 MB RAM, a Two-Page Display,
and ethernet card sonic.

Have fun
Laurent Vivier <LaurentVivier@wanadoo.fr>
11 Fevrier 2004 ;-)