/*
 * wrppm.c
 *
 * Copyright (C) 1991-1994, Thomas G. Lane.
 * This file is part of the Independent JPEG Group's software.
 * For conditions of distribution and use, see the accompanying README file.
 *
 * This file contains routines to write output images in PPM/PGM format.
 * The PBMPLUS library is NOT required to compile this software
 * (but it is highly useful as a set of PPM image manipulation programs).
 *
 * These routines may need modification for non-Unix environments or
 * specialized applications.  As they stand, they assume output to
 * an ordinary stdio stream.
 */

#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */

#ifdef PPM_SUPPORTED


/*
 * Haven't yet got around to making this work with text-format output,
 * hence cannot handle pixels wider than 8 bits.
 */

#if BITS_IN_JSAMPLE != 8
  Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */
#endif

/*
 * In fact, it's worse than that: we want JSAMPLE to be a char, so that we
 * can just fwrite() the decompressed data to a raw-format PPM or PGM file.
 *
 * The output buffer needs to be writable by fwrite().  On PCs, we must
 * allocate the buffer in near data space, because we are assuming small-data
 * memory model, wherein fwrite() can't reach far memory.  If you need to
 * process very wide images on a PC, you might have to compile in large-memory
 * model, or else replace fwrite() with a putc() loop --- which will be much
 * slower.
 */


/* Private version of data destination object */

typedef struct {
  struct djpeg_dest_struct pub;	/* public fields */

  JSAMPLE *iobuffer;		/* non-FAR pointer to I/O buffer */
  JSAMPROW pixrow;		/* FAR pointer to same */
  JDIMENSION buffer_width;	/* width of one row */
} ppm_dest_struct;

typedef ppm_dest_struct * ppm_dest_ptr;


/*
 * Write some pixel data.
 * In this module rows_supplied will always be 1.
 */

METHODDEF void
put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
		JDIMENSION rows_supplied)
{
  ppm_dest_ptr dest = (ppm_dest_ptr) dinfo;

  (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
}


/*
 * Write some pixel data when color quantization is in effect.
 * We have to demap the color index values to straight data.
 */

METHODDEF void
put_demapped_rgb (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
		  JDIMENSION rows_supplied)
{
  ppm_dest_ptr dest = (ppm_dest_ptr) dinfo;
  register char * bufferptr;
  register int pixval;
  register JSAMPROW ptr;
  register JSAMPROW color_map0 = cinfo->colormap[0];
  register JSAMPROW color_map1 = cinfo->colormap[1];
  register JSAMPROW color_map2 = cinfo->colormap[2];
  register JDIMENSION col;

  ptr = dest->pub.buffer[0];
  bufferptr = (char *) dest->iobuffer;
  for (col = cinfo->output_width; col > 0; col--) {
    pixval = GETJSAMPLE(*ptr++);
    *bufferptr++ = (char) GETJSAMPLE(color_map0[pixval]);
    *bufferptr++ = (char) GETJSAMPLE(color_map1[pixval]);
    *bufferptr++ = (char) GETJSAMPLE(color_map2[pixval]);
  }
  (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
}


METHODDEF void
put_demapped_gray (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
		   JDIMENSION rows_supplied)
{
  ppm_dest_ptr dest = (ppm_dest_ptr) dinfo;
  register char * bufferptr;
  register JSAMPROW ptr;
  register JSAMPROW color_map = cinfo->colormap[0];
  register JDIMENSION col;

  ptr = dest->pub.buffer[0];
  bufferptr = (char *) dest->iobuffer;
  for (col = cinfo->output_width; col > 0; col--) {
    *bufferptr++ = (char) GETJSAMPLE(color_map[GETJSAMPLE(*ptr++)]);
  }
  (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
}


/*
 * Startup: write the file header.
 */

METHODDEF void
start_output (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
{
  ppm_dest_ptr dest = (ppm_dest_ptr) dinfo;

  /* Emit file header */
  switch (cinfo->out_color_space) {
  case JCS_GRAYSCALE:
    /* emit header for raw PGM format */
    fprintf(dest->pub.output_file, "P5\n%ld %ld\n%d\n",
	    (long) cinfo->output_width, (long) cinfo->output_height, 255);
    break;
  case JCS_RGB:
    /* emit header for raw PPM format */
    fprintf(dest->pub.output_file, "P6\n%ld %ld\n%d\n",
	    (long) cinfo->output_width, (long) cinfo->output_height, 255);
    break;
  default:
    ERREXIT(cinfo, JERR_PPM_COLORSPACE);
  }
}


/*
 * Finish up at the end of the file.
 */

METHODDEF void
finish_output (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
{
  /* Make sure we wrote the output file OK */
  fflush(dinfo->output_file);
  if (ferror(dinfo->output_file))
    ERREXIT(cinfo, JERR_FILE_WRITE);
}


/*
 * The module selection routine for PPM format output.
 */

GLOBAL djpeg_dest_ptr
jinit_write_ppm (j_decompress_ptr cinfo)
{
  ppm_dest_ptr dest;

  /* This module does not work unless JSAMPLE is a char. */
  /* Unfortunately, we can't test it at compile time. */
  if (SIZEOF(JSAMPLE) != SIZEOF(char))
    ERREXIT(cinfo, JERR_PPM_SAMPLESIZE);

  /* Create module interface object, fill in method pointers */
  dest = (ppm_dest_ptr)
      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
				  SIZEOF(ppm_dest_struct));
  dest->pub.start_output = start_output;
  dest->pub.finish_output = finish_output;

  /* Calculate output image dimensions so we can allocate space */
  jpeg_calc_output_dimensions(cinfo);

  /* Create I/O buffer.  Note we make this near on a PC. */
  dest->buffer_width = cinfo->output_width * cinfo->out_color_components;
  dest->iobuffer = (JSAMPLE *)
    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
			(size_t) (dest->buffer_width * SIZEOF(JSAMPLE)));
  if (cinfo->quantize_colors) {
    /* When quantizing, need an output buffer for colormap indexes
     * that's separate from the physical I/O buffer.
     */
    dest->pub.buffer = (*cinfo->mem->alloc_sarray)
      ((j_common_ptr) cinfo, JPOOL_IMAGE, cinfo->output_width, (JDIMENSION) 1);
    dest->pub.buffer_height = 1;
    if (cinfo->out_color_space == JCS_GRAYSCALE)
      dest->pub.put_pixel_rows = put_demapped_gray;
    else
      dest->pub.put_pixel_rows = put_demapped_rgb;
  } else {
    /* Normal case, will fwrite() directly from decompressor output buffer. */
    /* Synthesize a JSAMPARRAY pointer structure */
    /* Cast here implies near->far pointer conversion on PCs */
    dest->pixrow = (JSAMPROW) dest->iobuffer;
    dest->pub.buffer = & dest->pixrow;
    dest->pub.buffer_height = 1;
    dest->pub.put_pixel_rows = put_pixel_rows;
  }

  return (djpeg_dest_ptr) dest;
}

#endif /* PPM_SUPPORTED */