Macintosh-SW/mac-rom-simm-programmer
1
0
Fork 0
mirror of https://github.com/dougg3/mac-rom-simm-programmer.git synced 2024-11-25 10:30:49 +00:00
Code Issues Projects Releases Wiki Activity

Tried to do some better commenting in usb_serial.c, also tried to do a better job of documenting the protocol in programmer_protocol.h

Browse Source
This commit is contained in:
Doug Brown 2012-01-26 20:42:42 -08:00
parent 147c2bfda3
commit 7f69cb476d
3 changed files with 99 additions and 136 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

38
main.c
View File

@ -19,6 +19,7 @@ int main(void)
DDRD |= (1 << 7);
PORTD &= ~(1 << 7);
// If there was a brownout detected, turn on the LED momentarily
if (MCUSR & (1 << BORF))
{
MCUSR = 0;
@ -39,42 +40,5 @@ int main(void)
USBSerial_Check();
}
/*int result = SIMMElectricalTest_Run();
if (result == 0)
{
while (1)
{
_delay_ms(200);
PIND = (1 << 7);
}
}
else
{
while (1)
{
int tmpResult = result;
while (tmpResult)
{
int thisDigit = (tmpResult % 10) + 1;
while (thisDigit--)
{
PIND = (1 << 7);
_delay_ms(500);
PIND = (1 << 7);
_delay_ms(500);
}
_delay_ms(2000);
tmpResult /= 10;
}
_delay_ms(5000);
}
}*/
return 0;
}

19
programmer_protocol.h
View File

@ -115,4 +115,23 @@ typedef enum BootloaderStateReply
BootloaderStateInProgrammer
} BootloaderStateReply;
// ------------------------- BOOTLOADER ERASE/WRITE PROTOCOL -------------------------
// If the command is BootloaderEraseAndWriteProgram, it will reply with CommandReplyOK
// followed by either BootloaderEraseOK or BootloaderEraseError. At this point
// the program can ask to write more data or finish or cancel, and then the appropriate
// reply will be sent back to it. Works very similar to the write protocol.
typedef enum ProgrammerBootloaderEraseWriteReply
{
BootloaderWriteOK,
BootloaderWriteError,
BootloaderWriteConfirmCancel
} ProgrammerBootloaderEraseWriteReply;
typedef enum ComputerBootloaderEraseWriteRequest
{
ComputerBootloaderWriteMore = 0,
ComputerBootloaderFinish,
ComputerBootloaderCancel
} ComputerBootloaderEraseWriteRequest;
#endif /* PROGRAMMER_PROTOCOL_H_ */

178
usb_serial/usb_serial.c
View File

@ -27,6 +27,7 @@ void USBSerial_Init(void)
USB_Init();
}
// Internal state so we know how to interpret the next-received byte
typedef enum ProgrammerCommandState
{
WaitingForCommand = 0,
@ -35,107 +36,37 @@ typedef enum ProgrammerCommandState
ReadingChipsUnableSendError,
WritingChips
} ProgrammerCommandState;
static ProgrammerCommandState curCommandState = WaitingForCommand;
// State info for reading/writing
static uint8_t byteAddressReceiveCount = 0;
static uint16_t curReadIndex;
static int16_t writePosInChunk = -1;
static uint16_t curWriteIndex = 0;
// Private functions
void USBSerial_HandleWaitingForCommandByte(uint8_t byte);
void USBSerial_HandleReadingChipsByte(uint8_t byte);
void USBSerial_SendReadDataChunk(void);
void USBSerial_HandleWritingChipsByte(uint8_t byte);
void USBSerial_ElectricalTest_Fail_Handler(uint8_t index1, uint8_t index2);
// Read/write to USB serial macros -- easier than retyping
// CDC_Device_XXX(&VirtualSerial_CDC_Interface...) every time
#define SendByte(b) CDC_Device_SendByte(&VirtualSerial_CDC_Interface, b)
#define ReadByte() CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface)
#define SendData(d, l) CDC_Device_SendData(&VirtualSerial_CDC_Interface, d, l)
// Should be called periodically in the main loop
void USBSerial_Check(void)
{
/*if (USB_DeviceState == DEVICE_STATE_Configured)
{
if (CDC_Device_BytesReceived(&VirtualSerial_CDC_Interface))
{
uint8_t rb = (uint8_t)CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface);
if (rb == 'i')
{
struct ChipID chips[4];
ExternalMem_IdentifyChips(chips);
char tmp[20];
uint32_t data = ExternalMem_ReadCycle(0);
int x;
for (x = 0; x < 4; x++)
{
sprintf(tmp, "IC%d: M%02X, D%02X\r\n", x+1, chips[x].manufacturerID, chips[x].deviceID);
CDC_Device_SendString(&VirtualSerial_CDC_Interface, tmp);
}
sprintf(tmp, "%08lX\r\n", data);
CDC_Device_SendString(&VirtualSerial_CDC_Interface, tmp);
}
else if (rb == 'e')
{
ExternalMem_EraseChips(ALL_CHIPS);
CDC_Device_SendString(&VirtualSerial_CDC_Interface, "Erased\r\n");
}
else if (rb == 'r')
{
uint32_t result = ExternalMem_ReadCycle(0);
char tmp[20];
sprintf(tmp, "%08lX\r\n", result);
CDC_Device_SendString(&VirtualSerial_CDC_Interface, tmp);
}
else if (rb == 'w')
{
uint32_t address = 0;
uint32_t x;
uint32_t y;
CDC_Device_SendString(&VirtualSerial_CDC_Interface, "Writing...\r\n");
CDC_Device_Flush(&VirtualSerial_CDC_Interface);
for (y = 0; y < 512UL*1024UL / (READ_CHUNK_SIZE_BYTES/4); y++)
{
for (x = 0; x < READ_CHUNK_SIZE_BYTES/4; x++)
{
ExternalMem_WriteByteToChips(address++, 0x12345678, ALL_CHIPS);
}
}
//ExternalMem_WriteByteToChips(0, 0x12345678UL, ALL_CHIPS);
CDC_Device_SendString(&VirtualSerial_CDC_Interface, "Wrote\r\n");
}
else if (rb == 't')
{
int result = SIMMElectricalTest_Run();
char tmp[20];
CDC_Device_SendString(&VirtualSerial_CDC_Interface, "SIMM electrical test complete: ");
sprintf(tmp, "%d errors\r\n", result);
CDC_Device_SendString(&VirtualSerial_CDC_Interface, tmp);
}
else if (rb == 'a')
{
uint32_t x;
CDC_Device_SendString(&VirtualSerial_CDC_Interface, "Reading...\r\n");
CDC_Device_Flush(&VirtualSerial_CDC_Interface);
for (x = 0; x < 512UL*1024UL; x++)
{
ExternalMem_ReadCycle(x);
}
CDC_Device_SendString(&VirtualSerial_CDC_Interface, "Finished\r\n");
}
}
}*/
// If we're configured, read a byte (if one is available) and process it
if (USB_DeviceState == DEVICE_STATE_Configured)
{
// Check for commands, etc...
int16_t recvByte = ReadByte();
// Did we get a byte? If so, hand it off to the correct handler
// function based on the current state
if (recvByte >= 0)
{
switch (curCommandState)
@ -153,24 +84,30 @@ void USBSerial_Check(void)
}
}
// And do the periodic CDC and USB tasks...
CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
USB_USBTask();
}
// If we're in the "waiting for command" state, handle the command...
void USBSerial_HandleWaitingForCommandByte(uint8_t byte)
{
switch (byte)
{
// Asked to enter waiting mode -- we're already there, so say OK.
case EnterWaitingMode:
SendByte(CommandReplyOK);
curCommandState = WaitingForCommand;
break;
// Asked to do the electrical test. Reply OK, and then do the test,
// sending whatever replies necessary
case DoElectricalTest:
SendByte(CommandReplyOK);
SIMMElectricalTest_Run(USBSerial_ElectricalTest_Fail_Handler);
SendByte(ProgrammerElectricalTestDone);
curCommandState = WaitingForCommand;
break;
// Asked to identify the chips in the SIMM. Identify them and send reply.
case IdentifyChips:
{
struct ChipID chips[4];
@ -185,91 +122,120 @@ void USBSerial_HandleWaitingForCommandByte(uint8_t byte)
SendByte(ProgrammerIdentifyDone);
break;
}
// Asked to read a single byte from each SIMM. Change the state and reply.
case ReadByte:
curCommandState = ReadingByteWaitingForAddress;
byteAddressReceiveCount = 0;
SendByte(CommandReplyOK);
break;
// Asked to read all four chips. Set the state, reply with the first chunk
case ReadChips:
curCommandState = ReadingChips;
curReadIndex = 0;
SendByte(CommandReplyOK);
USBSerial_SendReadDataChunk();
break;
// Erase the chips and reply OK. (TODO: Sometimes erase might fail)
case EraseChips:
ExternalMem_EraseChips(ALL_CHIPS);
SendByte(CommandReplyOK);
break;
// Begin writing the chips. Change the state, reply, wait for chunk of data
case WriteChips:
curCommandState = WritingChips;
curWriteIndex = 0;
writePosInChunk = -1;
SendByte(CommandReplyOK);
break;
// Asked for the current bootloader state. We are in the program right now,
// so reply accordingly.
case GetBootloaderState:
SendByte(CommandReplyOK);
SendByte(BootloaderStateInProgrammer);
break;
// Enter the bootloader. Wait a bit, then jump to the bootloader location.
case EnterBootloader:
SendByte(CommandReplyOK);
// Done with the USB interface -- the bootloader will re-initialize it.
USB_Disable();
// Disable interrupts...
// Disable interrupts so nothing weird happens...
cli();
// Wait a little bit to let everything settle and let the program close the port after the USB disconnect
// Wait a little bit to let everything settle and let the program
// close the port after the USB disconnect
_delay_ms(2000);
// Now run the bootloader
// And, of course, go into the bootloader.
__asm__ __volatile__ ( "jmp 0xE000" );
break;
// Enter the programmer. We're already there, so reply OK.
case EnterProgrammer:
// Already in the programmer
SendByte(CommandReplyOK);
break;
// We don't know what this command is, so reply that it was invalid.
default:
SendByte(CommandReplyInvalid);
break;
}
}
// If we're in the "reading chips" state, handle the incoming byte...
void USBSerial_HandleReadingChipsByte(uint8_t byte)
{
// The byte should be a reply from the computer. It should be either:
// 1) ComputerReadOK -- meaning it got the chunk we just sent
// or
// 2) ComputerReadCancel -- meaning the user canceled the read
switch (byte)
{
case ComputerReadOK:
// If they have confirmed the final data chunk, let them know
// that they have finished, and enter command state.
if (curReadIndex >= (CHIP_SIZE / (READ_CHUNK_SIZE_BYTES/4)))
{
SendByte(ProgrammerReadFinished);
curCommandState = WaitingForCommand;
}
else
else // There's more data left to read, so read it and send it to them!
{
SendByte(ProgrammerReadMoreData);
USBSerial_SendReadDataChunk();
}
break;
case ComputerReadCancel:
// If they've canceled, let them know we got their request and go back
// to "waiting for command" state
SendByte(ProgrammerReadConfirmCancel);
curCommandState = WaitingForCommand;
break;
}
}
// Read the next chunk of data from the SIMM and send it off over the serial.
void USBSerial_SendReadDataChunk(void)
{
// TODO: How do I send an error back to the device?
// Maybe the device, when it tries to request the next data chunk,
// will get an ERROR response instead of an "OK" response?
// Here's a buffer we will use to read the next chunk of data.
// It's static because the stack is NOT big enough for it. If I start
// running low on RAM, I could pull this out of the function and share it
// with other functions, but I'm not bothering with that for now.
static union
{
uint32_t readChunks[READ_CHUNK_SIZE_BYTES / 4];
uint8_t readChunkBytes[READ_CHUNK_SIZE_BYTES];
} chunks;
ExternalMem_Read(curReadIndex * (READ_CHUNK_SIZE_BYTES/4), chunks.readChunks, READ_CHUNK_SIZE_BYTES/4);
uint8_t retVal = SendData((const char *)chunks.readChunkBytes, READ_CHUNK_SIZE_BYTES);
// Read the next chunk of data, send it over USB, and make sure
// we sent it correctly.
ExternalMem_Read(curReadIndex * (READ_CHUNK_SIZE_BYTES/4),
chunks.readChunks, READ_CHUNK_SIZE_BYTES/4);
uint8_t retVal = SendData((const char *)chunks.readChunkBytes,
READ_CHUNK_SIZE_BYTES);
// If for some reason there was an error, mark it as such. Otherwise,
// increment our pointer so we know the next chunk of data to send.
if (retVal != ENDPOINT_RWSTREAM_NoError)
{
curCommandState = ReadingChipsUnableSendError;
@ -280,20 +246,30 @@ void USBSerial_SendReadDataChunk(void)
}
}
// Handles a received byte from the computer while we're in the "writing chips"
// mode.
void USBSerial_HandleWritingChipsByte(uint8_t byte)
{
// A buffer we use to store the incoming data. This, too, could be shared
// with other functions if I end up running out of RAM. Again, I'm not
// bothering with that yet, but this could easily be shared with the
// read function.
static union
{
uint32_t writeChunks[WRITE_CHUNK_SIZE_BYTES / 4];
uint8_t writeChunkBytes[WRITE_CHUNK_SIZE_BYTES];
} chunks;
// This means we have just started the entire process or just finished
// a chunk, so see what the computer has decided for us to do.
if (writePosInChunk == -1)
{
switch (byte)
{
// The computer asked to write more data to the SIMM.
case ComputerWriteMore:
writePosInChunk = 0;
// Make sure we don't write past the capacity of the chips.
if (curWriteIndex < CHIP_SIZE / (WRITE_CHUNK_SIZE_BYTES/4))
{
SendByte(ProgrammerWriteOK);
@ -301,26 +277,31 @@ void USBSerial_HandleWritingChipsByte(uint8_t byte)
else
{
SendByte(ProgrammerWriteError);
// TODO: Enter waiting for command mode?
}
break;
// The computer said that it's done writing.
case ComputerWriteFinish:
// Just to confirm that we finished writing...
SendByte(ProgrammerWriteOK);
curCommandState = WaitingForCommand;
break;
// The computer asked to cancel.
case ComputerWriteCancel:
SendByte(ProgrammerWriteConfirmCancel);
curCommandState = WaitingForCommand;
break;
}
}
else
else // Interpret the incoming byte as data to write to the SIMM.
{
// Save the byte, and check if we've filled up an entire chunk
chunks.writeChunkBytes[writePosInChunk++] = byte;
if (writePosInChunk >= WRITE_CHUNK_SIZE_BYTES)
{
// Write this data
ExternalMem_Write(curWriteIndex * (WRITE_CHUNK_SIZE_BYTES/4), chunks.writeChunks, WRITE_CHUNK_SIZE_BYTES/4, ALL_CHIPS);
// We filled up the chunk, write it out and confirm it, then wait
// for the next command from the computer!
ExternalMem_Write(curWriteIndex * (WRITE_CHUNK_SIZE_BYTES/4),
chunks.writeChunks, WRITE_CHUNK_SIZE_BYTES/4, ALL_CHIPS);
SendByte(ProgrammerWriteOK);
curWriteIndex++;
writePosInChunk = -1;
@ -328,18 +309,17 @@ void USBSerial_HandleWritingChipsByte(uint8_t byte)
}
}
// Whenever an electrical test failure occurs, this handler will be called
// by it. It sends out a failure notice followed by indexes of the two
// shorted pins.
void USBSerial_ElectricalTest_Fail_Handler(uint8_t index1, uint8_t index2)
{
// Sends out a failure notice -- followed by indexes of the two shorted pins
SendByte(ProgrammerElectricalTestFail);
SendByte(index1);
SendByte(index2);
}
/** Event handler for the library USB Configuration Changed event. */
// LUFA event handler for when the USB configuration changes.
void EVENT_USB_Device_ConfigurationChanged(void)
{
bool ConfigSuccess = true;
@ -347,7 +327,7 @@ void EVENT_USB_Device_ConfigurationChanged(void)
ConfigSuccess &= CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface);
}
/** Event handler for the library USB Control Request reception event. */
// LUFA event handler for when a USB control request is received
void EVENT_USB_Device_ControlRequest(void)
{
CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface);