/**************************************************************************//** * @file timer_reg.h * @version V1.00 * @brief TIMER register definition header file * * SPDX-License-Identifier: Apache-2.0 * @copyright (C) 2019 Nuvoton Technology Corp. All rights reserved. *****************************************************************************/ #ifndef __TIMER_REG_H__ #define __TIMER_REG_H__ #if defined ( __CC_ARM ) #pragma anon_unions #endif /** @addtogroup REGISTER Control Register @{ */ /** @addtogroup TIMER Timer Controller (TIMER) Memory Mapped Structure for TIMER Controller @{ */ typedef struct { /** * @var TIMER_T::CTL * Offset: 0x00 Timer Control Register * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[7:0] |PSC |Prescale Counter * | | |Timer input clock or event source is divided by (PSC+1) before it is fed to the timer up counter * | | |If this field is 0 (PSC = 0), then there is no scaling. * | | |Note: Update prescale counter value will reset internal 8-bit prescale counter and 24-bit up counter value. * |[15] |FUNCSEL |Function Selection * | | |0 = Timer controller is used as timer function. * | | |1 = Timer controller is used as PWM function. * | | |Note: When timer is used as PWM, the clock source of time controller will be forced to PCLKx automatically. * |[19] |INTRGEN |Inter-timer Trigger Mode Enable Bit * | | |Setting this bit will enable the inter-timer trigger capture function. * | | |The Timer0/2 will be in event counter mode and counting with external clock source or event * | | |Also, Timer1/3 will be in trigger-counting mode of capture function. * | | |0 = Inter-Timer Trigger Capture mode Disabled. * | | |1 = Inter-Timer Trigger Capture mode Enabled. * | | |Note: For Timer1/3, this bit is ignored and the read back value is always 0. * |[20] |PERIOSEL |Periodic Mode Behavior Selection Enable Bit * | | |0 = The behavior selection in periodic mode is Disabled. * | | |When user updates CMPDAT while timer is running in periodic mode, * | | |CNT will be reset to default value. * | | |1 = The behavior selection in periodic mode is Enabled. * | | |When user update CMPDAT while timer is running in periodic mode, the limitations as bellows list, * | | |If updated CMPDAT value > CNT, CMPDAT will be updated and CNT keep running continually. * | | |If updated CMPDAT value = CNT, timer time-out interrupt will be asserted. * | | |If updated CMPDAT value < CNT, CNT will be reset to default value. * |[21] |TGLPINSEL |Toggle-output Pin Select * | | |0 = Toggle mode output to TMx (Timer Event Counter Pin). * | | |1 = Toggle mode output to TMx_EXT (Timer External Capture Pin). * |[22] |CAPSRC |Capture Pin Source Selection * | | |0 = Capture Function source is from TMx_EXT (x= 0~3) pin. * | | |1 = Capture Function source is from internal ACMP output signal, internal clock (MIRC, LIRC, HIRC), or external clock (HXT, LXT). * | | |Note: When CAPSRC = 1, User can set INTERCAPSEL (TIMERx_EXTCTL[10:8]) to decide which internal ACMP output signal or which clock is as timer capture source. * |[23] |WKEN |Wake-up Function Enable Bit * | | |If this bit is set to 1, while timer interrupt flag TIF (TIMERx_INTSTS[0]) is 1 and INTEN (TIMERx_CTL[29]) is enabled, the timer interrupt signal will generate a wake-up trigger event to CPU. * | | |0 = Wake-up function Disabled if timer interrupt signal generated. * | | |1 = Wake-up function Enabled if timer interrupt signal generated. * |[24] |EXTCNTEN |Event Counter Mode Enable Bit * | | |This bit is for external counting pin function enabled. * | | |0 = Event counter mode Disabled. * | | |1 = Event counter mode Enabled. * | | |Note: When timer is used as an event counter, this bit should be set to 1 and select PCLK as timer clock source. * |[25] |ACTSTS |Timer Active Status Bit (Read Only) * | | |This bit indicates the 24-bit up counter status. * | | |0 = 24-bit up counter is not active. * | | |1 = 24-bit up counter is active. * | | |Note: This bit may active when CNT 0 transition to CNT 1. * |[28:27] |OPMODE |Timer Counting Mode Select * | | |00 = The timer controller is operated in One-shot mode. * | | |01 = The timer controller is operated in Periodic mode. * | | |10 = The timer controller is operated in Toggle-output mode. * | | |11 = The timer controller is operated in Continuous Counting mode. * |[29] |INTEN |Timer Interrupt Enable Bit * | | |0 = Timer time-out interrupt Disabled. * | | |1 = Timer time-out interrupt Enabled. * | | |Note: If this bit is enabled, when the timer time-out interrupt flag TIF is set to 1, the timer interrupt signal is generated and inform to CPU. * |[30] |CNTEN |Timer Counting Enable Bit * | | |0 = Stops/Suspends counting. * | | |1 = Starts counting. * | | |Note1: In stop status, and then set CNTEN to 1 will enable the 24-bit up counter to keep counting from the last stop counting value. * | | |Note2: This bit is auto-cleared by hardware in one-shot mode (TIMER_CTL[28:27] = 00) when the timer time-out interrupt flag TIF (TIMERx_INTSTS[0]) is generated. * | | |Note3: Set enable/disable this bit needs 2 * TMR_CLK period to become active, user can read ACTSTS (TIMERx_CTL[25]) to check enable/disable command is completed or not. * |[31] |ICEDEBUG |ICE Debug Mode Acknowledge Disable Bit (Write Protect) * | | |0 = ICE debug mode acknowledgement effects TIMER counting. * | | |TIMER counter will be held while CPU is held by ICE. * | | |1 = ICE debug mode acknowledgement Disabled. * | | |TIMER counter will keep going no matter CPU is held by ICE or not. * | | |Note: This bit is write protected. Refer to the SYS_REGLCTL register. * @var TIMER_T::CMP * Offset: 0x04 Timer Comparator Register * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[23:0] |CMPDAT |Timer Comparator Value * | | |CMPDAT is a 24-bit compared value register * | | |When the internal 24-bit up counter value is equal to CMPDAT value, the TIF (TIMERx_INTSTS[0] Timer Interrupt Flag) will set to 1. * | | |Time-out period = (Period of timer clock input) * (8-bit PSC + 1) * (24-bit CMPDAT). * | | |Note1: Never write 0x0 or 0x1 in CMPDAT field, or the core will run into unknown state. * | | |Note2: When timer is operating at continuous counting mode, the 24-bit up counter will keep counting continuously even if user writes a new value into CMPDAT field * | | |But if timer is operating at other modes, the 24-bit up counter will restart counting from 0 and using newest CMPDAT value to be the timer compared value while user writes a new value into CMPDAT field. * @var TIMER_T::INTSTS * Offset: 0x08 Timer Interrupt Status Register * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[0] |TIF |Timer Interrupt Flag * | | |This bit indicates the interrupt flag status of Timer while 24-bit timer up counter CNT (TIMERx_CNT[23:0]) value reaches to CMPDAT (TIMERx_CMP[23:0]) value. * | | |0 = No effect. * | | |1 = CNT value matches the CMPDAT value. * | | |Note: This bit is cleared by writing 1 to it. * |[1] |TWKF |Timer Wake-up Flag * | | |This bit indicates the interrupt wake-up flag status of timer. * | | |0 = Timer does not cause CPU wake-up. * | | |1 = CPU wake-up from Idle or Power-down mode if timer time-out interrupt signal generated. * | | |Note: This bit is cleared by writing 1 to it. * @var TIMER_T::CNT * Offset: 0x0C Timer Data Register * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[23:0] |CNT |Timer Data Register * | | |Read operation. * | | |Read this register to get CNT value. For example: * | | |If EXTCNTEN (TIMERx_CTL[24]) is 0, user can read CNT value for getting current 24-bit counter value. * | | |If EXTCNTEN (TIMERx_CTL[24]) is 1, user can read CNT value for getting current 24-bit event input counter value. * | | |Write operation. * | | |Writing any value to this register will reset current CNT value to 0 and reload internal 8-bit prescale counter. * |[31] |RSTACT |Timer Data Register Reset Active (Read Only) * | | |This bit indicates if the counter reset operation active. * | | |When user writes this CNT register, timer starts to reset its internal 24-bit timer up-counter to 0 and reload 8-bit pre-scale counter * | | |At the same time, timer set this flag to 1 to indicate the counter reset operation is in progress * | | |Once the counter reset operation done, timer clear this bit to 0 automatically. * | | |0 = Reset operation is done. * | | |1 = Reset operation triggered by writing TIMERx_CNT is in progress. * @var TIMER_T::CAP * Offset: 0x10 Timer Capture Data Register * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[23:0] |CAPDAT |Timer Capture Data Register * | | |When CAPEN (TIMERx_EXTCTL[3]) bit is set, CAPFUNCS (TIMERx_EXTCTL[4]) bit is 0, and a transition on TMx_EXT pin matched the CAPEDGE (TIMERx_EXTCTL[14:12]) setting, CAPIF (TIMERx_EINTSTS[0]) will set to 1 and the current timer counter value CNT (TIMERx_CNT[23:0]) will be auto-loaded into this CAPDAT field. * @var TIMER_T::EXTCTL * Offset: 0x14 Timer External Control Register * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[0] |CNTPHASE |Timer External Count Phase * | | |This bit indicates the detection phase of external counting pin TMx (x= 0~3). * | | |0 = A falling edge of external counting pin will be counted. * | | |1 = A rising edge of external counting pin will be counted. * |[3] |CAPEN |Timer Capture Enable Bit * | | |This bit enables the capture input function. * | | |0 =Capture source Disabled. * | | |1 =Capture source Enabled. * | | |Note: When CAPEN is 1, user can set INTERCAPSEL (TIMERx_EXTCTL [10:8]) to select capture source. * |[4] |CAPFUNCS |Capture Function Selection * | | |0 = External Capture Mode Enabled. * | | |1 = External Reset Mode Enabled. * | | |Note1: When CAPFUNCS is 0, transition on TMx_EXT (x= 0~3) pin is using to save current 24-bit timer counter value (CNT value) to CAPDAT field. * | | |Note2: When CAPFUNCS is 1, transition on TMx_EXT (x= 0~3) pin is using to save current 24-bit timer counter value (CNT value) to CAPDAT field then CNT value will be reset immediately. * |[5] |CAPIEN |Timer External Capture Interrupt Enable Bit * | | |0 = TMx_EXT (x= 0~3) pin, ACMP, internal clock, or external clock detection Interrupt Disabled. * | | |1 = TMx_EXT (x= 0~3) pin, ACMP, internal clock, or external clock detection Interrupt Enabled. * | | |Note: CAPIEN is used to enable timer external interrupt * | | |If CAPIEN enabled, timer will rise an interrupt when CAPIF (TIMERx_EINTSTS[0]) is 1. * | | |For example, while CAPIEN = 1, CAPEN = 1, and CAPEDGE = 00, a 1 to 0 transition on the Tx_EXT (x= 0~3) pin, ACMP, internal clock, or external clock will cause the CAPIF to be set then the interrupt signal is generated and sent to NVIC to inform CPU. * |[6] |CAPDBEN |Timer External Capture Pin De-bounce Enable Bit * | | |0 = TMx_EXT (x= 0~3) pin de-bounce or ACMP output de-bounce Disabled. * | | |1 = TMx_EXT (x= 0~3) pin de-bounce or ACMP output de-bounce Enabled. * | | |Note: If this bit is enabled, the edge detection of TMx_EXT pin or ACMP output is detected with de-bounce circuit. * |[7] |CNTDBEN |Timer Counter Pin De-bounce Enable Bit * | | |0 = TMx (x= 0~3) pin de-bounce Disabled. * | | |1 = TMx (x= 0~3) pin de-bounce Enabled. * | | |Note: If this bit is enabled, the edge detection of TMx pin is detected with de-bounce circuit. * |[10:8] |INTERCAPSEL|Internal Capture Source Select * | | |000 = Capture Function source is from internal ACMP0 output signal. * | | |001 = Capture Function source is from internal ACMP1 output signal. * | | |010 = Capture Function source is from HXT. * | | |011 = Capture Function source is from LXT. * | | |100 = Capture Function source is from HIRC. * | | |101 = Capture Function source is from LIRC. * | | |110 = Capture Function source is from MIRC. * | | |111 = Reserved. * | | |Note: these bits only available when CAPSRC (TIMERx_CTL[22]) is 1. * |[14:12] |CAPEDGE |Timer External Capture Pin Edge Detect * | | |When first capture event is generated, the CNT (TIMERx_CNT[23:0]) will be reset to 0 and first CAPDAT (TIMERx_CAP[23:0]) should be to 0. * | | |000 = Capture event occurred when detect falling edge transfer on TMx_EXT (x= 0~3) pin. * | | |001 = Capture event occurred when detect rising edge transfer on TMx_EXT (x= 0~3) pin. * | | |010 = Capture event occurred when detect both falling and rising edge transfer on TMx_EXT (x= 0~3) pin, and first capture event occurred at falling edge transfer. * | | |011 = Capture event occurred when detect both rising and falling edge transfer on TMx_EXT (x= 0~3) pin, and first capture event occurred at rising edge transfer. * | | |110 = First capture event occurred at falling edge, follows capture events are at rising edge transfer on TMx_EXT (x= 0~3) pin. * | | |111 = First capture event occurred at rising edge, follows capture events are at falling edge transfer on TMx_EXT (x= 0~3) pin. * | | |100, 101 = Reserved. * | | |Note: Set CAPSRC (TIMERx_CTL[22]) and INTERCAPSEL (TIMERx_EXTCTL[10:8]) to select capture source. * |[16] |ECNTSSEL |Event Counter Source Selection to Trigger Event Counter Function * | | |0 = Event Counter input source is from TMx (x= 0~3) pin. * | | |1 = Event Counter input source is from USB internal SOF output signal. * |[31:28] |CAPDIVSCL |Timer Capture Source Divider Scale * | | |This bits indicate the divide scale for capture source divider * | | |0000 = Capture source/1. * | | |0001 = Capture source/2. * | | |0010 = Capture source/4. * | | |0011 = Capture source/8. * | | |0100 = Capture source/16. * | | |0101 = Capture source/32. * | | |0110 = Capture source/64. * | | |0111 = Capture source/128. * | | |1000 = Capture source/256. * | | |1001~1111 = Reserved. * | | |Note: Sets INTERCAPSEL (TIMERx_EXTCTL[10:8]) and CAPSRC (TIMERx_CTL[22]) to select capture source. * @var TIMER_T::EINTSTS * Offset: 0x18 Timer External Interrupt Status Register * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[0] |CAPIF |Timer External Capture Interrupt Flag * | | |This bit indicates the timer external capture interrupt flag status. * | | |0 = TMx_EXT (x= 0~3) pin, ACMP, internal clock, or external clock interrupt did not occur. * | | |1 = TMx_EXT (x= 0~3) pin, ACMP, internal clock, or external clock interrupt occurred. * | | |Note1: This bit is cleared by writing 1 to it. * | | |Note2: When CAPEN (TIMERx_EXTCTL[3]) bit is set, CAPFUNCS (TIMERx_EXTCTL[4]) bit is 0, and a transition on Tx_EXT (x= 0~3) pin, ACMP, internal clock, or external clock matched the CAPEDGE (TIMERx_EXTCTL[2:1]) setting, this bit will set to 1 by hardware. * | | |Note3: There is a new incoming capture event detected before CPU clearing the CAPIF status * | | |If the above condition occurred, the Timer will keep register TIMERx_CAP unchanged and drop the new capture value. * @var TIMER_T::TRGCTL * Offset: 0x1C Timer Trigger Control Register * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[0] |TRGSSEL |Trigger Source Select Bit * | | |This bit is used to select internal trigger source is form timer time-out interrupt signal or capture interrupt signal. * | | |0 = Time-out interrupt signal is used to internal trigger PWM, PDMA, DAC, and EADC. * | | |1 = Capture interrupt signal is used to internal trigger PWM, PDMA, DAC, and EADC. * |[1] |TRGPWM |Trigger PWM/BPWM Enable Bit * | | |If this bit is set to 1, each timer time-out event or capture event can be as PWM/BPWM counter clock source. * | | |0 = Timer interrupt trigger PWM/BPWM Disabled. * | | |1 = Timer interrupt trigger PWM/BPWM Enabled. * | | |Note: If TRGSSEL (TIMERx_TRGCTL[0]) = 0, time-out interrupt signal as PWM/BPWM counter clock source. * | | |If TRGSSEL (TIMERx_TRGCTL[0]) = 1, capture interrupt signal as PWM/BPWM counter clock source. * |[2] |TRGEADC |Trigger EADC Enable Bit * | | |If this bit is set to 1, each timer time-out event or capture event can be triggered EADC conversion. * | | |0 = Timer interrupt trigger EADC Disabled. * | | |1 = Timer interrupt trigger EADC Enabled. * | | |Note: If TRGSSEL (TIMERx_TRGCTL[0]) = 0, time-out interrupt signal will trigger EADC conversion. * | | |If TRGSSEL (TIMERx_TRGCTL[0]) = 1, capture interrupt signal will trigger ADC conversion. * |[3] |TRGDAC |Trigger DAC Enable Bit * | | |If this bit is set to 1, timer time-out interrupt or capture interrupt can be triggered DAC. * | | |0 = Timer interrupt trigger DAC Disabled. * | | |1 = Timer interrupt trigger DAC Enabled. * | | |Note: If TRGSSEL (TIMERx_TRGCTL[0]) = 0, time-out interrupt signal will trigger DAC. * | | |If TRGSSEL (TIMERx_TRGCTL[0]) = 1, capture interrupt signal will trigger DAC. * |[4] |TRGPDMA |Trigger PDMA Enable Bit * | | |If this bit is set to 1, each timer time-out event or capture event can be triggered PDMA transfer. * | | |0 = Timer interrupt trigger PDMA Disabled. * | | |1 = Timer interrupt trigger PDMA Enabled. * | | |Note: If TRGSSEL (TIMERx_TRGCTL[0]) = 0, time-out interrupt signal will trigger PDMA transfer. * | | |If TRGSSEL (TIMERx_TRGCTL[0]) = 1, capture interrupt signal will trigger PDMA transfer. * @var TIMER_T::PWMCTL * Offset: 0x40 Timer PWM Control Register * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[0] |CNTEN |PWM Counter Enable Bit * | | |0 = PWM counter and clock prescale Stop Running. * | | |1 = PWM counter and clock prescale Start Running. * |[3] |CNTMODE |PWM Counter Mode * | | |0 = Auto-reload mode. * | | |1 = One-shot mode. * |[12] |PWMINTWKEN|PWM Interrupt Wake-up Enable * | | |If PWM interrupt occurs when chip is at power down mode, PWMINTWKEN can determine whether chip wake-up occurs or not. * | | |0 = PWM interrupt wake-up disable. * | | |1 = PWM interrupt wake-up enable. * |[30] |DBGHALT |ICE Debug Mode Counter Halt (Write Protect) * | | |If debug mode counter halt is enabled, PWM counter will keep current value until exit ICE debug mode. * | | |0 = ICE debug mode counter halt disable. * | | |1 = ICE debug mode counter halt enable. * | | |Note: This bit is write protected. Refer toSYS_REGLCTL register. * |[31] |DBGTRIOFF |ICE Debug Mode Acknowledge Disable Bit (Write Protect) * | | |0 = ICE debug mode acknowledgement effects PWM output. * | | |PWM output pin will be forced as tri-state while ICE debug mode acknowledged. * | | |1 = ICE debug mode acknowledgement disabled. * | | |PWM output pin will keep output no matter ICE debug mode acknowledged or not. * | | |Note: This bit is write protected. Refer toSYS_REGLCTL register. * @var TIMER_T::PWMCLKPSC * Offset: 0x44 Timer PWM Counter Clock Pre-scale Register * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[7:0] |CLKPSC |PWM Counter Clock Pre-scale * | | |The active clock of PWM counter is decided by counter clock prescale and divided by (CLKPSC + 1) * | | |If CLKPSC is 0, then there is no scaling in PWM counter clock source. * @var TIMER_T::PWMCNTCLR * Offset: 0x48 Timer PWM Clear Counter Register * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[0] |CNTCLR |Clear PWM Counter Control Bit * | | |It is automatically cleared by hardware. * | | |0 = No effect. * | | |1 = Clear 16-bit PWM counter to 0x00000 in up count type. * | | |Note: Timer peripheral clock source should be set as PCLK to ensure that this bit can automatically cleared by hardware. * @var TIMER_T::PWMPERIOD * Offset: 0x4C Timer PWM Period Register * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[15:0] |PERIOD |PWM Period Register * | | |In up count type: PWM counter counts from 0 to PERIOD, and restarts from 0. * | | |In up count type: * | | |PWM period time = (PERIOD + 1) * (CLKPSC + 1) * TMRx_PWMCLK. * @var TIMER_T::PWMCMPDAT * Offset: 0x50 Timer PWM Comparator Register * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[15:0] |CMP |PWM Comparator Register * | | |PWM CMP is used to compare with PWM CNT to generate PWM output waveform, interrupt events and trigger EADC, PDMA, and DAC starting converting. * @var TIMER_T::PWMCNT * Offset: 0x54 Timer PWM Counter Register * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[15:0] |CNT |PWM Counter Value Register (Read Only) * | | |User can monitor CNT to know the current counter value in 16-bit period counter. * @var TIMER_T::PWMPOLCTL * Offset: 0x58 Timer PWM Pin Output Polar Control Register * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[0] |PINV |PWMx Output Pin Polar Control Bit * | | |The bit is used to control polarity state of PWMx_OUT pin. * | | |0 = PWMx_OUT pin polar inverse Disabled. * | | |1 = PWMx_OUT polar inverse Enabled. * | | |Note: Sets POSEL (TIMERx_PWMPOCTL[8]) to select Tx or Tx_EXT as PWMx output pin. * @var TIMER_T::PWMPOCTL * Offset: 0x5C Timer PWM Pin Output Control Register * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[0] |POEN |PWMx Output Pin Enable Bit * | | |0 = PWMx_OUT pin at tri-state mode. * | | |1 = PWMx_OUT pin in output mode. * | | |Note: Sets POSEL (TIMERx_PWMPOCTL[8]) to select Tx or Tx_EXT as PWMx output pin. * |[8] |POSEL |PWM Output Pin Select * | | |0 = PWMx_OUT pin is Tx. * | | |1 = PWMx_OUT pin is Tx_EXT. * @var TIMER_T::PWMINTEN0 * Offset: 0x60 Timer PWM Interrupt Enable Register 0 * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[1] |PIEN |PWM Period Point Interrupt Enable Bit * | | |0 = Period point interrupt Disabled. * | | |1 = Period point interrupt Enabled. * |[2] |CMPUIEN |PWM Compare Up Count Interrupt Enable Bit * | | |0 = Compare up count interrupt Disabled. * | | |1 = Compare up count interrupt Enabled. * @var TIMER_T::PWMINTSTS0 * Offset: 0x64 Timer PWM Interrupt Status Register 0 * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[1] |PIF |PWM Period Point Interrupt Flag * | | |This bit is set by hardware when TIMERx_PWM counter reaches PERIOD. * | | |Note: This bit is cleared by writing 1 to it. * |[2] |CMPUIF |PWM Compare Up Count Interrupt Flag * | | |This bit is set by hardware when TIMERx_PWM counter in up count direction and reaches CMP. * | | |Note1: If CMP equal to PERIOD, there is no CMPUIF flag in up count type. * | | |Note2: This bit is cleared by writing 1 to it. * @var TIMER_T::PWMTRGCTL * Offset: 0x68 Timer PWM Trigger Control Register * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[1:0] |TRGSEL |PWM Counter Event Source Select to Trigger Conversion * | | |00 = Trigger conversion at period point (PIF). * | | |01 = Trigger conversion at compare up count point (CMPUIF). * | | |10 = Trigger conversion at period or compare up count point (PIF or CMPUIF). * | | |11 = Reserved. * |[7] |PWMTRGEADC|PWM Counter Event Trigger EADC Conversion Enable Bit * | | |0 = PWM counter event trigger EADC conversion Disabled. * | | |1 = PWM counter event trigger EADC conversion Enabled. * | | |Note: Set TRGSEL (TIMERx_PWMTRGCTL[1:0]) to select PWM trigger conversion source. * |[8] |PWMTRGDAC |PWM Counter Event Trigger DAC Conversion Enable Bit * | | |If this bit is set to 1, PWM can trigger DAC conversion. * | | |0 = PWM trigger DAC Disabled. * | | |1 = PWM trigger DAC Enabled. * | | |Note: Set TRGSEL (TIMERx_PWMTRGCTL[1:0]) to select PWM trigger conversion source. * |[9] |PWMTRGPDMA|PWM Counter Event Trigger PDMA Conversion Enable Bit * | | |If this bit is set to 1, PWM can trigger PDMA conversion. * | | |0 = PWM trigger PDMA Disabled. * | | |1 = PWM trigger PDMA Enabled. * | | |Note: Set TRGSEL (TIMERx_PWMTRGCTL[1:0]) to select PWM trigger conversion source. * @var TIMER_T::PWMSTATUS * Offset: 0x6C Timer PWM Status Register * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[0] |CNTMAXF |PWM Counter Equal to 0xFFFF Flag * | | |0 = The PWM counter value never reached its maximum value 0xFFFF. * | | |1 = The PWM counter value has reached its maximum value. * | | |Note: This bit is cleared by writing 1 to it. * |[8] |PWMINTWKF |PWM Interrupt Wake-up Flag * | | |0 = PWM interrupt wake-up is not occurred. * | | |1 = PWM interrupt wake-up has occurred. * | | |Note: This bit is cleared by writing 1 to it. * |[16] |EADCTRGF |Trigger EADC Start Conversion Flag * | | |0 = PWM counter event trigger EADC start conversion is not occurred. * | | |1 = PWM counter event trigger EADC start conversion has occurred. * | | |Note: This bit is cleared by writing 1 to it. * |[17] |DACTRGF |Trigger DAC Start Conversion Flag * | | |0 = PWM counter event trigger DAC start conversion is not occurred. * | | |1 = PWM counter event trigger DAC start conversion has occurred. * | | |Note: This bit is cleared by writing 1 to it. * |[18] |PDMATRGF |Trigger PDMA Start Conversion Flag * | | |0 = PWM counter event trigger PDMA start conversion is not occurred. * | | |1 = PWM counter event trigger PDMA start conversion has occurred. * | | |Note: This bit is cleared by writing 1 to it. * @var TIMER_T::PWMPBUF * Offset: 0x70 Timer PWM Period Buffer Register * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[15:0] |PBUF |PWM Period Buffer Register (Read Only) * | | |Used as PERIOD active register. * @var TIMER_T::PWMCMPBUF * Offset: 0x74 Timer PWM Comparator Buffer Register * --------------------------------------------------------------------------------------------------- * |Bits |Field |Descriptions * | :----: | :----: | :---- | * |[15:0] |CMPBUF |PWM Comparator Buffer Register (Read Only) * | | |Used as CMP active register. */ __IO uint32_t CTL; /*!< [0x0000] Timer Control Register */ __IO uint32_t CMP; /*!< [0x0004] Timer Comparator Register */ __IO uint32_t INTSTS; /*!< [0x0008] Timer Interrupt Status Register */ __IO uint32_t CNT; /*!< [0x000c] Timer Data Register */ __I uint32_t CAP; /*!< [0x0010] Timer Capture Data Register */ __IO uint32_t EXTCTL; /*!< [0x0014] Timer External Control Register */ __IO uint32_t EINTSTS; /*!< [0x0018] Timer External Interrupt Status Register */ __IO uint32_t TRGCTL; /*!< [0x001c] Timer Trigger Control Register */ /// @cond HIDDEN_SYMBOLS __I uint32_t RESERVE0[8]; /// @endcond //HIDDEN_SYMBOLS __IO uint32_t PWMCTL; /*!< [0x0040] Timer PWM Control Register */ __IO uint32_t PWMCLKPSC; /*!< [0x0044] Timer PWM Counter Clock Pre-scale Register */ __IO uint32_t PWMCNTCLR; /*!< [0x0048] Timer PWM Clear Counter Register */ __IO uint32_t PWMPERIOD; /*!< [0x004c] Timer PWM Period Register */ __IO uint32_t PWMCMPDAT; /*!< [0x0050] Timer PWM Comparator Register */ __I uint32_t PWMCNT; /*!< [0x0054] Timer PWM Counter Register */ __IO uint32_t PWMPOLCTL; /*!< [0x0058] Timer PWM Pin Output Polar Control Register */ __IO uint32_t PWMPOCTL; /*!< [0x005c] Timer PWM Pin Output Control Register */ __IO uint32_t PWMINTEN0; /*!< [0x0060] Timer PWM Interrupt Enable Register 0 */ __IO uint32_t PWMINTSTS0; /*!< [0x0064] Timer PWM Interrupt Status Register 0 */ __IO uint32_t PWMTRGCTL; /*!< [0x0068] Timer PWM Trigger Control Register */ __IO uint32_t PWMSTATUS; /*!< [0x006c] Timer PWM Status Register */ __I uint32_t PWMPBUF; /*!< [0x0070] Timer PWM Period Buffer Register */ __I uint32_t PWMCMPBUF; /*!< [0x0074] Timer PWM Comparator Buffer Register */ } TIMER_T; /** @addtogroup TIMER_CONST TIMER Bit Field Definition Constant Definitions for TIMER Controller @{ */ #define TIMER_CTL_PSC_Pos (0) /*!< TIMER_T::CTL: PSC Position */ #define TIMER_CTL_PSC_Msk (0xfful << TIMER_CTL_PSC_Pos) /*!< TIMER_T::CTL: PSC Mask */ #define TIMER_CTL_FUNCSEL_Pos (15) /*!< TIMER_T::CTL: FUNCSEL Position */ #define TIMER_CTL_FUNCSEL_Msk (0x1ul << TIMER_CTL_FUNCSEL_Pos) /*!< TIMER_T::CTL: FUNCSEL Mask */ #define TIMER_CTL_INTRGEN_Pos (19) /*!< TIMER_T::CTL: INTRGEN Position */ #define TIMER_CTL_INTRGEN_Msk (0x1ul << TIMER_CTL_INTRGEN_Pos) /*!< TIMER_T::CTL: INTRGEN Mask */ #define TIMER_CTL_PERIOSEL_Pos (20) /*!< TIMER_T::CTL: PERIOSEL Position */ #define TIMER_CTL_PERIOSEL_Msk (0x1ul << TIMER_CTL_PERIOSEL_Pos) /*!< TIMER_T::CTL: PERIOSEL Mask */ #define TIMER_CTL_TGLPINSEL_Pos (21) /*!< TIMER_T::CTL: TGLPINSEL Position */ #define TIMER_CTL_TGLPINSEL_Msk (0x1ul << TIMER_CTL_TGLPINSEL_Pos) /*!< TIMER_T::CTL: TGLPINSEL Mask */ #define TIMER_CTL_CAPSRC_Pos (22) /*!< TIMER_T::CTL: CAPSRC Position */ #define TIMER_CTL_CAPSRC_Msk (0x1ul << TIMER_CTL_CAPSRC_Pos) /*!< TIMER_T::CTL: CAPSRC Mask */ #define TIMER_CTL_WKEN_Pos (23) /*!< TIMER_T::CTL: WKEN Position */ #define TIMER_CTL_WKEN_Msk (0x1ul << TIMER_CTL_WKEN_Pos) /*!< TIMER_T::CTL: WKEN Mask */ #define TIMER_CTL_EXTCNTEN_Pos (24) /*!< TIMER_T::CTL: EXTCNTEN Position */ #define TIMER_CTL_EXTCNTEN_Msk (0x1ul << TIMER_CTL_EXTCNTEN_Pos) /*!< TIMER_T::CTL: EXTCNTEN Mask */ #define TIMER_CTL_ACTSTS_Pos (25) /*!< TIMER_T::CTL: ACTSTS Position */ #define TIMER_CTL_ACTSTS_Msk (0x1ul << TIMER_CTL_ACTSTS_Pos) /*!< TIMER_T::CTL: ACTSTS Mask */ #define TIMER_CTL_OPMODE_Pos (27) /*!< TIMER_T::CTL: OPMODE Position */ #define TIMER_CTL_OPMODE_Msk (0x3ul << TIMER_CTL_OPMODE_Pos) /*!< TIMER_T::CTL: OPMODE Mask */ #define TIMER_CTL_INTEN_Pos (29) /*!< TIMER_T::CTL: INTEN Position */ #define TIMER_CTL_INTEN_Msk (0x1ul << TIMER_CTL_INTEN_Pos) /*!< TIMER_T::CTL: INTEN Mask */ #define TIMER_CTL_CNTEN_Pos (30) /*!< TIMER_T::CTL: CNTEN Position */ #define TIMER_CTL_CNTEN_Msk (0x1ul << TIMER_CTL_CNTEN_Pos) /*!< TIMER_T::CTL: CNTEN Mask */ #define TIMER_CTL_ICEDEBUG_Pos (31) /*!< TIMER_T::CTL: ICEDEBUG Position */ #define TIMER_CTL_ICEDEBUG_Msk (0x1ul << TIMER_CTL_ICEDEBUG_Pos) /*!< TIMER_T::CTL: ICEDEBUG Mask */ #define TIMER_CMP_CMPDAT_Pos (0) /*!< TIMER_T::CMP: CMPDAT Position */ #define TIMER_CMP_CMPDAT_Msk (0xfffffful << TIMER_CMP_CMPDAT_Pos) /*!< TIMER_T::CMP: CMPDAT Mask */ #define TIMER_INTSTS_TIF_Pos (0) /*!< TIMER_T::INTSTS: TIF Position */ #define TIMER_INTSTS_TIF_Msk (0x1ul << TIMER_INTSTS_TIF_Pos) /*!< TIMER_T::INTSTS: TIF Mask */ #define TIMER_INTSTS_TWKF_Pos (1) /*!< TIMER_T::INTSTS: TWKF Position */ #define TIMER_INTSTS_TWKF_Msk (0x1ul << TIMER_INTSTS_TWKF_Pos) /*!< TIMER_T::INTSTS: TWKF Mask */ #define TIMER_CNT_CNT_Pos (0) /*!< TIMER_T::CNT: CNT Position */ #define TIMER_CNT_CNT_Msk (0xfffffful << TIMER_CNT_CNT_Pos) /*!< TIMER_T::CNT: CNT Mask */ #define TIMER_CNT_RSTACT_Pos (31) /*!< TIMER_T::CNT: RSTACT Position */ #define TIMER_CNT_RSTACT_Msk (0x1ul << TIMER_CNT_RSTACT_Pos) /*!< TIMER_T::CNT: RSTACT Mask */ #define TIMER_CAP_CAPDAT_Pos (0) /*!< TIMER_T::CAP: CAPDAT Position */ #define TIMER_CAP_CAPDAT_Msk (0xfffffful << TIMER_CAP_CAPDAT_Pos) /*!< TIMER_T::CAP: CAPDAT Mask */ #define TIMER_EXTCTL_CNTPHASE_Pos (0) /*!< TIMER_T::EXTCTL: CNTPHASE Position */ #define TIMER_EXTCTL_CNTPHASE_Msk (0x1ul << TIMER_EXTCTL_CNTPHASE_Pos) /*!< TIMER_T::EXTCTL: CNTPHASE Mask */ #define TIMER_EXTCTL_CAPEN_Pos (3) /*!< TIMER_T::EXTCTL: CAPEN Position */ #define TIMER_EXTCTL_CAPEN_Msk (0x1ul << TIMER_EXTCTL_CAPEN_Pos) /*!< TIMER_T::EXTCTL: CAPEN Mask */ #define TIMER_EXTCTL_CAPFUNCS_Pos (4) /*!< TIMER_T::EXTCTL: CAPFUNCS Position */ #define TIMER_EXTCTL_CAPFUNCS_Msk (0x1ul << TIMER_EXTCTL_CAPFUNCS_Pos) /*!< TIMER_T::EXTCTL: CAPFUNCS Mask */ #define TIMER_EXTCTL_CAPIEN_Pos (5) /*!< TIMER_T::EXTCTL: CAPIEN Position */ #define TIMER_EXTCTL_CAPIEN_Msk (0x1ul << TIMER_EXTCTL_CAPIEN_Pos) /*!< TIMER_T::EXTCTL: CAPIEN Mask */ #define TIMER_EXTCTL_CAPDBEN_Pos (6) /*!< TIMER_T::EXTCTL: CAPDBEN Position */ #define TIMER_EXTCTL_CAPDBEN_Msk (0x1ul << TIMER_EXTCTL_CAPDBEN_Pos) /*!< TIMER_T::EXTCTL: CAPDBEN Mask */ #define TIMER_EXTCTL_CNTDBEN_Pos (7) /*!< TIMER_T::EXTCTL: CNTDBEN Position */ #define TIMER_EXTCTL_CNTDBEN_Msk (0x1ul << TIMER_EXTCTL_CNTDBEN_Pos) /*!< TIMER_T::EXTCTL: CNTDBEN Mask */ #define TIMER_EXTCTL_INTERCAPSEL_Pos (8) /*!< TIMER_T::EXTCTL: INTERCAPSEL Position */ #define TIMER_EXTCTL_INTERCAPSEL_Msk (0x7ul << TIMER_EXTCTL_INTERCAPSEL_Pos) /*!< TIMER_T::EXTCTL: INTERCAPSEL Mask */ #define TIMER_EXTCTL_CAPEDGE_Pos (12) /*!< TIMER_T::EXTCTL: CAPEDGE Position */ #define TIMER_EXTCTL_CAPEDGE_Msk (0x7ul << TIMER_EXTCTL_CAPEDGE_Pos) /*!< TIMER_T::EXTCTL: CAPEDGE Mask */ #define TIMER_EXTCTL_ECNTSSEL_Pos (16) /*!< TIMER_T::EXTCTL: ECNTSSEL Position */ #define TIMER_EXTCTL_ECNTSSEL_Msk (0x1ul << TIMER_EXTCTL_ECNTSSEL_Pos) /*!< TIMER_T::EXTCTL: ECNTSSEL Mask */ #define TIMER_EXTCTL_CAPDIVSCL_Pos (28) /*!< TIMER_T::EXTCTL: CAPDIVSCL Position */ #define TIMER_EXTCTL_CAPDIVSCL_Msk (0xful << TIMER_EXTCTL_CAPDIVSCL_Pos) /*!< TIMER_T::EXTCTL: CAPDIVSCL Mask */ #define TIMER_EINTSTS_CAPIF_Pos (0) /*!< TIMER_T::EINTSTS: CAPIF Position */ #define TIMER_EINTSTS_CAPIF_Msk (0x1ul << TIMER_EINTSTS_CAPIF_Pos) /*!< TIMER_T::EINTSTS: CAPIF Mask */ #define TIMER_TRGCTL_TRGSSEL_Pos (0) /*!< TIMER_T::TRGCTL: TRGSSEL Position */ #define TIMER_TRGCTL_TRGSSEL_Msk (0x1ul << TIMER_TRGCTL_TRGSSEL_Pos) /*!< TIMER_T::TRGCTL: TRGSSEL Mask */ #define TIMER_TRGCTL_TRGPWM_Pos (1) /*!< TIMER_T::TRGCTL: TRGPWM Position */ #define TIMER_TRGCTL_TRGPWM_Msk (0x1ul << TIMER_TRGCTL_TRGPWM_Pos) /*!< TIMER_T::TRGCTL: TRGPWM Mask */ #define TIMER_TRGCTL_TRGEADC_Pos (2) /*!< TIMER_T::TRGCTL: TRGEADC Position */ #define TIMER_TRGCTL_TRGEADC_Msk (0x1ul << TIMER_TRGCTL_TRGEADC_Pos) /*!< TIMER_T::TRGCTL: TRGEADC Mask */ #define TIMER_TRGCTL_TRGDAC_Pos (3) /*!< TIMER_T::TRGCTL: TRGDAC Position */ #define TIMER_TRGCTL_TRGDAC_Msk (0x1ul << TIMER_TRGCTL_TRGDAC_Pos) /*!< TIMER_T::TRGCTL: TRGDAC Mask */ #define TIMER_TRGCTL_TRGPDMA_Pos (4) /*!< TIMER_T::TRGCTL: TRGPDMA Position */ #define TIMER_TRGCTL_TRGPDMA_Msk (0x1ul << TIMER_TRGCTL_TRGPDMA_Pos) /*!< TIMER_T::TRGCTL: TRGPDMA Mask */ #define TIMER_TRGCTL_TRGTK_Pos (8) /*!< TIMER_T::TRGCTL: TRGTK Position */ #define TIMER_TRGCTL_TRGTK_Msk (0x1ul << TIMER_TRGCTL_TRGTK_Pos) /*!< TIMER_T::TRGCTL: TRGTK Mask */ #define TIMER_PWMCTL_CNTEN_Pos (0) /*!< TIMER_T::PWMCTL: CNTEN Position */ #define TIMER_PWMCTL_CNTEN_Msk (0x1ul << TIMER_PWMCTL_CNTEN_Pos) /*!< TIMER_T::PWMCTL: CNTEN Mask */ #define TIMER_PWMCTL_CNTMODE_Pos (3) /*!< TIMER_T::PWMCTL: CNTMODE Position */ #define TIMER_PWMCTL_CNTMODE_Msk (0x1ul << TIMER_PWMCTL_CNTMODE_Pos) /*!< TIMER_T::PWMCTL: CNTMODE Mask */ #define TIMER_PWMCTL_PWMINTWKEN_Pos (12) /*!< TIMER_T::PWMCTL: PWMINTWKEN Position */ #define TIMER_PWMCTL_PWMINTWKEN_Msk (0x1ul << TIMER_PWMCTL_PWMINTWKEN_Pos) /*!< TIMER_T::PWMCTL: PWMINTWKEN Mask */ #define TIMER_PWMCTL_DBGHALT_Pos (30) /*!< TIMER_T::PWMCTL: DBGHALT Position */ #define TIMER_PWMCTL_DBGHALT_Msk (0x1ul << TIMER_PWMCTL_DBGHALT_Pos) /*!< TIMER_T::PWMCTL: DBGHALT Mask */ #define TIMER_PWMCTL_DBGTRIOFF_Pos (31) /*!< TIMER_T::PWMCTL: DBGTRIOFF Position */ #define TIMER_PWMCTL_DBGTRIOFF_Msk (0x1ul << TIMER_PWMCTL_DBGTRIOFF_Pos) /*!< TIMER_T::PWMCTL: DBGTRIOFF Mask */ #define TIMER_PWMCLKPSC_CLKPSC_Pos (0) /*!< TIMER_T::PWMCLKPSC: CLKPSC Position */ #define TIMER_PWMCLKPSC_CLKPSC_Msk (0xfful << TIMER_PWMCLKPSC_CLKPSC_Pos) /*!< TIMER_T::PWMCLKPSC: CLKPSC Mask */ #define TIMER_PWMCNTCLR_CNTCLR_Pos (0) /*!< TIMER_T::PWMCNTCLR: CNTCLR Position */ #define TIMER_PWMCNTCLR_CNTCLR_Msk (0x1ul << TIMER_PWMCNTCLR_CNTCLR_Pos) /*!< TIMER_T::PWMCNTCLR: CNTCLR Mask */ #define TIMER_PWMPERIOD_PERIOD_Pos (0) /*!< TIMER_T::PWMPERIOD: PERIOD Position */ #define TIMER_PWMPERIOD_PERIOD_Msk (0xfffful << TIMER_PWMPERIOD_PERIOD_Pos) /*!< TIMER_T::PWMPERIOD: PERIOD Mask */ #define TIMER_PWMCMPDAT_CMP_Pos (0) /*!< TIMER_T::PWMCMPDAT: CMP Position */ #define TIMER_PWMCMPDAT_CMP_Msk (0xfffful << TIMER_PWMCMPDAT_CMP_Pos) /*!< TIMER_T::PWMCMPDAT: CMP Mask */ #define TIMER_PWMCNT_CNT_Pos (0) /*!< TIMER_T::PWMCNT: CNT Position */ #define TIMER_PWMCNT_CNT_Msk (0xfffful << TIMER_PWMCNT_CNT_Pos) /*!< TIMER_T::PWMCNT: CNT Mask */ #define TIMER_PWMPOLCTL_PINV_Pos (0) /*!< TIMER_T::PWMPOLCTL: PINV Position */ #define TIMER_PWMPOLCTL_PINV_Msk (0x1ul << TIMER_PWMPOLCTL_PINV_Pos) /*!< TIMER_T::PWMPOLCTL: PINV Mask */ #define TIMER_PWMPOCTL_POEN_Pos (0) /*!< TIMER_T::PWMPOCTL: POEN Position */ #define TIMER_PWMPOCTL_POEN_Msk (0x1ul << TIMER_PWMPOCTL_POEN_Pos) /*!< TIMER_T::PWMPOCTL: POEN Mask */ #define TIMER_PWMPOCTL_POSEL_Pos (8) /*!< TIMER_T::PWMPOCTL: POSEL Position */ #define TIMER_PWMPOCTL_POSEL_Msk (0x1ul << TIMER_PWMPOCTL_POSEL_Pos) /*!< TIMER_T::PWMPOCTL: POSEL Mask */ #define TIMER_PWMINTEN0_PIEN_Pos (1) /*!< TIMER_T::PWMINTEN0: PIEN Position */ #define TIMER_PWMINTEN0_PIEN_Msk (0x1ul << TIMER_PWMINTEN0_PIEN_Pos) /*!< TIMER_T::PWMINTEN0: PIEN Mask */ #define TIMER_PWMINTEN0_CMPUIEN_Pos (2) /*!< TIMER_T::PWMINTEN0: CMPUIEN Position */ #define TIMER_PWMINTEN0_CMPUIEN_Msk (0x1ul << TIMER_PWMINTEN0_CMPUIEN_Pos) /*!< TIMER_T::PWMINTEN0: CMPUIEN Mask */ #define TIMER_PWMINTSTS0_PIF_Pos (1) /*!< TIMER_T::PWMINTSTS0: PIF Position */ #define TIMER_PWMINTSTS0_PIF_Msk (0x1ul << TIMER_PWMINTSTS0_PIF_Pos) /*!< TIMER_T::PWMINTSTS0: PIF Mask */ #define TIMER_PWMINTSTS0_CMPUIF_Pos (2) /*!< TIMER_T::PWMINTSTS0: CMPUIF Position */ #define TIMER_PWMINTSTS0_CMPUIF_Msk (0x1ul << TIMER_PWMINTSTS0_CMPUIF_Pos) /*!< TIMER_T::PWMINTSTS0: CMPUIF Mask */ #define TIMER_PWMTRGCTL_TRGSEL_Pos (0) /*!< TIMER_T::PWMTRGCTL: TRGSEL Position */ #define TIMER_PWMTRGCTL_TRGSEL_Msk (0x3ul << TIMER_PWMTRGCTL_TRGSEL_Pos) /*!< TIMER_T::PWMTRGCTL: TRGSEL Mask */ #define TIMER_PWMTRGCTL_PWMTRGEADC_Pos (7) /*!< TIMER_T::PWMTRGCTL: PWMTRGEADC Position*/ #define TIMER_PWMTRGCTL_PWMTRGEADC_Msk (0x1ul << TIMER_PWMTRGCTL_PWMTRGEADC_Pos) /*!< TIMER_T::PWMTRGCTL: PWMTRGEADC Mask */ #define TIMER_PWMTRGCTL_PWMTRGDAC_Pos (8) /*!< TIMER_T::PWMTRGCTL: PWMTRGDAC Position */ #define TIMER_PWMTRGCTL_PWMTRGDAC_Msk (0x1ul << TIMER_PWMTRGCTL_PWMTRGDAC_Pos) /*!< TIMER_T::PWMTRGCTL: PWMTRGDAC Mask */ #define TIMER_PWMTRGCTL_PWMTRGPDMA_Pos (9) /*!< TIMER_T::PWMTRGCTL: PWMTRGPDMA Position*/ #define TIMER_PWMTRGCTL_PWMTRGPDMA_Msk (0x1ul << TIMER_PWMTRGCTL_PWMTRGPDMA_Pos) /*!< TIMER_T::PWMTRGCTL: PWMTRGPDMA Mask */ #define TIMER_PWMSTATUS_CNTMAXF_Pos (0) /*!< TIMER_T::PWMSTATUS: CNTMAXF Position */ #define TIMER_PWMSTATUS_CNTMAXF_Msk (0x1ul << TIMER_PWMSTATUS_CNTMAXF_Pos) /*!< TIMER_T::PWMSTATUS: CNTMAXF Mask */ #define TIMER_PWMSTATUS_PWMINTWKF_Pos (8) /*!< TIMER_T::PWMSTATUS: PWMINTWKF Position */ #define TIMER_PWMSTATUS_PWMINTWKF_Msk (0x1ul << TIMER_PWMSTATUS_PWMINTWKF_Pos) /*!< TIMER_T::PWMSTATUS: PWMINTWKF Mask */ #define TIMER_PWMSTATUS_EADCTRGF_Pos (16) /*!< TIMER_T::PWMSTATUS: EADCTRGF Position */ #define TIMER_PWMSTATUS_EADCTRGF_Msk (0x1ul << TIMER_PWMSTATUS_EADCTRGF_Pos) /*!< TIMER_T::PWMSTATUS: EADCTRGF Mask */ #define TIMER_PWMSTATUS_DACTRGF_Pos (17) /*!< TIMER_T::PWMSTATUS: DACTRGF Position */ #define TIMER_PWMSTATUS_DACTRGF_Msk (0x1ul << TIMER_PWMSTATUS_DACTRGF_Pos) /*!< TIMER_T::PWMSTATUS: DACTRGF Mask */ #define TIMER_PWMSTATUS_PDMATRGF_Pos (18) /*!< TIMER_T::PWMSTATUS: PDMATRGF Position */ #define TIMER_PWMSTATUS_PDMATRGF_Msk (0x1ul << TIMER_PWMSTATUS_PDMATRGF_Pos) /*!< TIMER_T::PWMSTATUS: PDMATRGF Mask */ #define TIMER_PWMPBUF_PBUF_Pos (0) /*!< TIMER_T::PWMPBUF: PBUF Position */ #define TIMER_PWMPBUF_PBUF_Msk (0xfffful << TIMER_PWMPBUF_PBUF_Pos) /*!< TIMER_T::PWMPBUF: PBUF Mask */ #define TIMER_PWMCMPBUF_CMPBUF_Pos (0) /*!< TIMER_T::PWMCMPBUF: CMPBUF Position */ #define TIMER_PWMCMPBUF_CMPBUF_Msk (0xfffful << TIMER_PWMCMPBUF_CMPBUF_Pos) /*!< TIMER_T::PWMCMPBUF: CMPBUF Mask */ /** @} TIMER_CONST */ /** @} end of TIMER register group */ /** @} end of REGISTER group */ #if defined ( __CC_ARM ) #pragma no_anon_unions #endif #endif /* __TIMER_REG_H__ */