/*
 * board_hw.h
 *
 *  Created on: Nov 14, 2020
 *      Author: Doug
 *
 * Copyright (C) 2011-2023 Doug Brown
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */

#ifndef HAL_AT90USB646_BOARD_HW_H_
#define HAL_AT90USB646_BOARD_HW_H_

#include "gpio_hw.h"
#include "../gpio.h"
#include "hardware.h"
#include "../usbcdc.h"

/** Gets the GPIO pin on the board that controls the status LED
 *
 * @return The status LED pin
 */
static inline GPIOPin Board_LEDPin(void)
{
	return GPIO_PIN(GPIOD, 7);
}

/** Jumps to the bootloader
 *
 */
static inline void Board_EnterBootloader(void)
{
	// Insert a small delay to ensure that it arrives before rebooting.
	DelayMS(1000);

	// Done with the USB interface -- the bootloader will re-initialize it.
	USBCDC_Disable();

	// Disable interrupts so nothing weird happens...
	DisableInterrupts();

	// Wait a little bit to let everything settle and let the program
	// close the port after the USB disconnect
	DelayMS(2000);

	// Jump to the correct bootloader address based on whether this is an
	// AT90USB128x or AT90USB64x
	if (IsAT90USB128x())
	{
		__asm__ __volatile__ ( "jmp 0x1E000" );
	}
	else
	{
		__asm__ __volatile__ ( "jmp 0xE000" );
	}
}

#endif /* HAL_AT90USB646_BOARD_HW_H_ */