Firmware for Mac ROM SIMM programmer

Doug Brown 147c2bfda3 Did some more splitting of responsibilities in the code		2011-12-26 15:02:39 -08:00
.settings	Added extra commands for moving back and forth between the bootloader and the actual program.	2011-12-24 20:09:39 -08:00
LUFA
tests	Optimized the SIMM electrical test, fixed a few small bugs I had introduced in the previous commit. Added comments where necessary. Seems to work great now.	2011-12-18 14:55:08 -08:00
usb_serial	Did some more splitting of responsibilities in the code	2011-12-26 15:02:39 -08:00
.cproject	Started writing more command handling	2011-12-11 08:35:53 -08:00
.gitignore
.project
cdc_device_definition.c	Did some more splitting of responsibilities in the code	2011-12-26 15:02:39 -08:00
cdc_device_definition.h	Did some more splitting of responsibilities in the code	2011-12-26 15:02:39 -08:00
chip_id.h	Started writing more command handling	2011-12-11 08:35:53 -08:00
delay.c
delay.h
Descriptors.c	Started working on more optimizations, but something weird is happening and it's crashing...not sure why yet.	2011-12-11 21:48:26 -08:00
Descriptors.h	Continued playing with USB serial stuff. I think it's working well now, but I'm running into problems reading from the SIMM, so I need to figure out why I'm not getting the data I expect.	2011-12-10 10:35:41 -08:00
external_mem.c	Fixed the ordering of the chips -- I had the bytes reversed. Now, when I write/read a continuous stream of data, the bytes will correspond with the correct chips.	2011-12-17 11:18:56 -08:00
external_mem.h	Started working on more optimizations, but something weird is happening and it's crashing...not sure why yet.	2011-12-11 21:48:26 -08:00
main.c	Optimized some of my routines and fixed a nasty, nasty bug that was causing the board to crash because of multiple things being outputs simultaneously.	2011-12-13 21:56:20 -08:00
mcp23s17.c	Broke out the SPI read/write into a single routine. Less code repetition -- easier to read and smaller.	2011-12-17 13:43:12 -08:00
mcp23s17.h
ports.c	Fixed the ordering of the chips -- I had the bytes reversed. Now, when I write/read a continuous stream of data, the bytes will correspond with the correct chips.	2011-12-17 11:18:56 -08:00
ports.h
programmer_protocol.h	Moved the programmer protocol to a different file in preparation for sharing it across all the various programs (bootloader, programmer, control program)	2011-12-26 11:31:45 -08:00