Macintosh-SW
/
mac-rom-simm-programmer
mirror of https://github.com/dougg3/mac-rom-simm-programmer.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
mac-rom-simm-programmer/hal/m258ke/nuvoton/lcd_reg.h

1337 lines
104 KiB
C
Raw Blame History

/**************************************************************************//**
* @file lcd_reg.h
* @version V1.00
* @brief LCD register definition header file
*
* SPDX-License-Identifier: Apache-2.0
* @copyright (C) 2022 Nuvoton Technology Corp. All rights reserved.
*****************************************************************************/
#ifndef __LCD_REG_H__
#define __LCD_REG_H__
/**
@addtogroup REGISTER Control Register
@{
*/
/**
@addtogroup LCD Liquid-Crystal Display(LCD)
Memory Mapped Structure for LCD Controller
@{
*/
typedef struct
{
/**
* @var LCD_T::CTL
* Offset: 0x00 LCD Control Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |EN |LCD Display Enable Bit
* | | |0 = LCD display function Disabled.
* | | |1 = LCD display function Enabled.
* | | |Note 1: When software writes 1 to this bit, the LCD Controller needs some synchronizing time to completely enable the LCD display function
* | | |Before that, the read value of this bit is still 0.
* | | |Note 2: When software writes 0 to this bit, the LCD Controller needs some synchronizing time to completely disable the LCD display function
* | | |Before that, the read value of this bit is still 1.
* |[31] |SYNC |LCD Enable/Disable Synchronizing Indicator (Read Only)
* | | |When software writes 0/1 to EN bit (LCD_CTL[0]), the LCD Controller needs some synchronizing time to completely disable/enable the LCD display function
* | | |During this time, this bit keeps at 1.
* | | |0 = LCD display function is completely disabled/enabled.
* | | |1 = LCD display function is not yet completely disabled/enabled.
* | | |Note 1: The synchronizing time to enable LCD display function is not constant
* | | |It is between one and two cycles of CLKLCD.
* | | |Note 2: The LCD display function cannot be disabled until the end of a frame
* | | |So the maximum synchronizing time to disable LCD display function could be as long as one frame time.
* @var LCD_T::PSET
* Offset: 0x04 LCD Panel Setting Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[1:0] |BIAS |LCD Bias Level Selection
* | | |This field is used to select the bias level.
* | | |0 = Reserved.
* | | |1 = 1/2 Bias.
* | | |2 = 1/3 Bias.
* | | |3 = 1/4 Bias.
* |[4:2] |DUTY |LCD Duty Ratio Selection
* | | |This field is used to select the duty ratio.
* | | |0 = 1/1 Duty.
* | | |1 = 1/2 Duty.
* | | |2 = 1/3 Duty.
* | | |3 = 1/4 Duty.
* | | |4 = 1/5 Duty.
* | | |5 = 1/6 Duty.
* | | |6 = 1/7 Duty.
* | | |7 = 1/8 Duty.
* |[5] |TYPE |LCD Waveform Type Selection
* | | |This bit is used to select the waveform type.
* | | |0 = Type A.
* | | |1 = Type B.
* |[6] |INV |LCD Waveform Inverse
* | | |This bit is used to set the inverse LCD waveform.
* | | |0 = COM/SEG waveform is normal.
* | | |1 = COM/SEG waveform is inverse.
* |[17:8] |FREQDIV |LCD Operating Frequency (FLCD) Divider
* | | |The field is used to divide CLKLCD to generate the LCD operating frequency.
* | | |LCD Operating Frequency = (CLKLCD Frequency) / (FREQDIV + 1).
* | | |Note 1: FREQDIV can be set from 0 to 1023, therefore,
* | | |the fastest LCD operating frequency is equal to CLKLCD frequency, and
* | | |the lowest LCD operating frequency is equal to CLKLCD frequency divided by 1024.
* | | |Note 2: LCD frame rate is
* | | |(LCD Operating Frequency) x (Duty Ratio) x 1/2 for type A waveform, and
* | | |(LCD Operating Frequency) x (Duty Ratio) for type B waveform.
* | | |Example: Assuming the LCD operating frequency is 1 kHz, duty ratio is 1/4, then the LCD frame rate is
* | | |1 kHz x (1/4) x (1/2) = 125 Hz for type A waveform, and.
* | | |1 kHz x (1/4) = 250 Hz for type B waveform.
* |[21:18] |VSEL |LCD Operating Voltage (VLCD) Select
* | | |This field is used to select the LCD operating voltage. (For Charge Pump Only)
* | | |0 = 3.0 V.
* | | |1 = 3.2 V.
* | | |2 = 3.4 V.
* | | |3 = 3.6 V.
* | | |4 = 3.8 V.
* | | |5 = 4.0 V.
* | | |6 = 4.2 V.
* | | |7 = 4.4 V.
* | | |8 = 4.6 V.
* | | |9 = 4.8 V.
* | | |10 = 5.0 V.
* | | |11 = 5.2 V.
* | | |Others = (Reserved).
* | | |Note: This field is meaningful only if the VLCD source is the charge pump
* | | |Otherwise, this field is ignored.
* |[27:24] |VTUNE |LCD Operating Voltage (VLCD) Fine Tuning
* | | |This field is used to fine tune the LCD operating voltage. (For Charge Pump Only)
* | | |0 = No tuning.
* | | |1 = decrease by 1 unit of voltage.
* | | |2 = decrease by 2 units of voltage.
* | | |3 = decrease by 3 units of voltage.
* | | |...
* | | |7 = decrease by 7 units of voltage.
* | | |8 = increase by 8 units of voltage.
* | | |9 = increase by 7 units of voltage.
* | | |10 = increase by 6 units of voltage.
* | | |...
* | | |14 = increase by 2 units of voltage.
* | | |15 = increase by 1 unit of voltage.
* | | |Note 1: a unit of voltage is about 0.04 V.
* | | |Note 2: This field is meaningful only if the VLCD source is the charge pump
* | | |Otherwise, this field is ignored.
* @var LCD_T::FSET
* Offset: 0x08 LCD Frame Setting Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |BLINK |LCD Blinking Enable Bit
* | | |0 = LCD blinking function Disabled.
* | | |1 = LCD blinking function Enabled.
* |[17:8] |FCV |Frame Counting Value
* | | |This field indicates the maximum value that the frame counter can reach.
* | | |Note 1: The frame counter automatically increases by 1 at the end of every frame
* | | |When the counter reaches FCV, it will recounts from 0 at the end of the next frame
* | | |At this moment, the hardware sets a dedicated flag to 1, and triggers a dedicated interrupt if it is enabled.
* | | |Note 2: For type B waveform, the frame counter increases at the end of odd frames, not even frames.
* |[19] |PTYPE |Pause Type
* | | |To indicate when a pause duration occurs
* | | |0 = In-Frame Pause.
* | | |1 = In-Duty Pause.
* |[23:20] |PTIME |Pause Time
* | | |To indicate how long a pause duration is
* | | |0 = 0 Unit (No Pause).
* | | |1 = 1 Unit.
* | | |2 = 2 Units.
* | | |3 = 3 Units.
* | | |...
* | | |15 = 15 Units.
* | | |1 Unit is about 512 us for In-Frame pause type.
* | | |1 Unit is about 32 us for In-Duty pause type.
* @var LCD_T::DSET
* Offset: 0x0C LCD Driving Setting Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[1:0] |VSRC |LCD Operating Voltage (VLCD) Source
* | | |0 = VLCD Power.
* | | |1 = AVDD Power.
* | | |2 = Built-In Charge Pump.
* | | |3 = (None).
* | | |Note: Whenever the LCD controller is disabled, all VLCD sources are automatically cut off.
* |[2] |RESMODE |Resistive Network Driving Mode
* | | |0 = High-Driving Disabled.
* | | |1 = High-Driving Enabled.
* |[3] |BUFEN |Voltage Buffer Enable Bit
* | | |0 = Voltage Buffer Disabled.
* | | |1 = Voltage Buffer Enabled.
* | | |Note: When RES_MODE = 1, the voltage buffers are automatically disabled
* | | |The setting of BUF_EN bit is ignored.
* |[4] |PSVEN |Power Saving Mode Enable Bit
* | | |0 = Power Saving Mode Disabled.
* | | |1 = Power Saving Mode Enabled.
* | | |Note: when RES_MODE = 0 and BUF_EN = 0, the output drivers consumes the least driving current
* | | |In this case, the power saving mode is automatically disabled
* | | |The setting of PSV_EN bit is ignored.
* |[5] |PSVREV |Power Saving Timing Reverse
* | | |0 = Timing of power saving is normal.
* | | |1 = Timing of power saving is reversed.
* | | |Note: When the timing is reversed,
* | | |the original powe-saving period becomes no-power-saving, and
* | | |the original no-power-saving period becomes power-saving.
* |[11:8] |PSVT1 |Power Saving Enable Time Setting
* | | |The Enable Time of the power saving mode is calculated as
* | | |Enable Time = 15.625 us x (PSV_T1 + 1),.
* | | |where 15.625 us is the half-cycle time of CLKLCD, whose frequency is assumed to be 32 kHz.
* | | |PSV_T1 can be set as 0, 1, 2, u2026, 15, so
* | | |the minimum Enable Time is about 15.625 us, and
* | | |the maximum Enable Time is about 15.625 x 16 = 250 us.
* | | |Note: In the following two cases, the power saving mode is disabled
* | | |The setting of PSV_T1 bits is ignored.
* | | |1. SV_EN = 0.
* | | |2. RES_MODE = 0 and BUF_EN = 0.
* |[15:12] |PSVT2 |Power Saving On Time Setting
* | | |The On Time of the power saving mode is calculated as
* | | |On Time = 15.625 us x (PSV_T2 + 1.),
* | | |where 15.625 us is the half-cycle time of CLKLCD, whose frequency is assumed to be 32 kHz.
* | | |PSV_T2 can be set as 0, 1, 2, u2026, 15, so
* | | |the minimum On Time is about 15.625 us, and
* | | |the maximum On Time is about 15.625 x 16 = 250 us.
* | | |Note: In the following two cases, the power saving mode is disabled
* | | |The setting of PSV_T2 bits is ignored.
* | | |1. SV_EN = 0.
* | | |2. ES_MODE = 0 and BUF_EN = 0 (In this case, SV_EN is ignored).
* |[28:16] |CTOUT |Charging Timer TimeOut
* | | |This field is used to specify the timeout value for the charging timer
* | | |When the charging timer reaches this timeout value, a status bit or an interrupt will occur.
* | | |The timeout is calculated by the following formula:
* | | | Timeout = 31.25 us x (CTOUT + 1.),
* | | |where 31.25 us is the cycle time of CLKLCD, whose frequency is assumed to be 32 kHz.
* | | |CTOUT can be set as 0, 1, 2,u2026, 8191, so
* | | |the minimum timeout is 31.25 us, and
* | | |the maximum timeout is 31.25 x 8192 = 256 ms.
* @var LCD_T::OSET
* Offset: 0x10 LCD Output Setting Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |SEL8 |LCD8 Output Select
* | | |0 = LCD8 is SEG43.
* | | |1 = LCD8 is COM4.
* |[1] |SEL9 |LCD9 Output Select
* | | |0 = LCD9 is SEG42.
* | | |1 = LCD9 is COM5.
* |[2] |SEL10 |LCD10 Output Select
* | | |0 = LCD10 is SEG20.
* | | |1 = LCD10 is COM0.
* |[3] |SEL11 |LCD11 Output Select
* | | |0 = LCD11 is SEG19.
* | | |1 = LCD11 is COM1.
* |[4] |SEL12 |LCD12 Output Select
* | | |0 = LCD12 is SEG18.
* | | |1 = LCD12 is COM2.
* |[5] |SEL13 |LCD13 Output Select
* | | |0 = LCD13 is SEG17.
* | | |1 = LCD13 is COM3.
* |[6] |SEL14 |LCD14 Output Select
* | | |0 = LCD14 is SEG41.
* | | |1 = LCD14 is COM6.
* |[7] |SEL15 |LCD15 Output Select
* | | |0 = LCD15 is SEG40.
* | | |1 = LCD15 is COM7.
* |[8] |SEL24 |LCD24 Output Select
* | | |0 = LCD24 is SEG31.
* | | |1 = LCD24 is COM4.
* |[9] |SEL25 |LCD25 Output Select
* | | |0 = LCD25 is SEG30.
* | | |1 = LCD25 is COM5.
* |[10] |SEL26 |LCD26 Output Select
* | | |0 = LCD26 is SEG29.
* | | |1 = LCD26 is COM6.
* |[11] |SEL27 |LCD27 Output Select
* | | |0 = LCD27 is SEG28.
* | | |1 = LCD27 is COM7.
* |[12] |SEL28 |LCD28 Output Select
* | | |0 = LCD28 is SEG27.
* | | |1 = LCD28 is COM2.
* |[13] |SEL29 |LCD29 Output Select
* | | |0 = LCD29 is SEG26.
* | | |1 = LCD29 is COM3.
* |[15:14] |SEL35 |LCD35 Output Select
* | | |00 = LCD35 is COM4.
* | | |01 = LCD35 is SEG20.
* | | |10 = LCD35 is SEG47.
* | | |11 = Reserved.
* |[17:16] |SEL36 |LCD36 Output Select
* | | |00 = LCD36 is COM5.
* | | |01 = LCD36 is SEG19.
* | | |10 = LCD36 is SEG46.
* | | |11 = Reserved.
* |[19:18] |SEL37 |LCD37 Output Select
* | | |00 = LCD37 is COM6.
* | | |01 = LCD37 is SEG18.
* | | |10 = LCD37 is SEG45.
* | | |11 = Reserved.
* |[21:20] |SEL38 |LCD38 Output Select
* | | |00 = LCD38 is COM7.
* | | |01 = LCD38 is SEG17.
* | | |10 = LCD38 is SEG44.
* | | |11 = Reserved.
* |[22] |SEL41 |LCD41 Output Select
* | | |0 = LCD41 is SEG14.
* | | |1 = LCD41 is COM0.
* |[23] |SEL42 |LCD42 Output Select
* | | |0 = LCD42 is SEG13.
* | | |1 = LCD42 is COM1.
* |[24] |SEL47 |LCD47 Output Select
* | | |0 = LCD47 is SEG08.
* | | |1 = LCD47 is LCD_V1.
* |[25] |SEL48 |LCD48 Output Select
* | | |0 = LCD48 is SEG07.
* | | |1 = LCD48 is LCD_V2.
* |[26] |SEL49 |LCD49 Output Select
* | | |0 = LCD49 is SEG06.
* | | |1 = LCD49 is LCD_V3.
* @var LCD_T::STS
* Offset: 0x14 LCD Status Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |FCEND |End of Frame-Counting Flag
* | | |This flag is automatically set by hardware at the end of a frame, and the frame counter value must be equal to FCV (LCD_FSET[17:8], Frame Counting Value).
* | | |0 = End of Frame-Counting did not occur.
* | | |1 = End of Frame-Counting occurred.
* | | |Note 1: Software can clear this bit by writing 1 to it.
* | | |Note 2: For type B waveform, this flag is set only at the end of an odd frame.
* |[1] |FEND |End of Frame Flag
* | | |This flag is automatically set by hardware at the end of a frame.
* | | |0 = End of Frame did not occur.
* | | |1 = End of Frame occurred.
* | | |Note 1: Software can clear this bit by writing 1 to it.
* | | |Note 2: For type B waveform, this flag is set only at the end of an odd frame.
* |[2] |CTOUT |Charging Timeout Flag
* | | |This flag is automatically set by hardware when the charging timer reaches the timeout value.
* | | |0 = Charging Timeout did not occur.
* | | |1 = Charging Timeout occurred.
* | | |Note: Software can clear this bit by writing 1 to it.
* |[28:16] |CTIME |Charging Timer Value (Read Only)
* | | |The field contains the value of the charging timer. It records the charging time of the charge pump.
* | | |The charging timer stops counting when the charge pump stops charging or a timeout occurs
* | | |At this moment, the hardware dumps the current charging timer value into this field.
* | | |Charging Time = 31.25 us x (CTIME + 1), where 31.25 us is the cycle time of CLKLCD, whose frequency is assumed to be 32 kHz.
* @var LCD_T::INTEN
* Offset: 0x18 LCD Interrupt Enable Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |FCEND |End of Frame-Counting Interrupt Enable Bit
* | | |An interrupt occurs at the end of a frame, and the frame counter value must be equal to FCV (LCD_FSET[17:8], Frame Counting Value).
* | | |0 = End of Frame-Counting Interrupt Disabled.
* | | |1 = End of Frame-Counting Interrupt Enabled.
* | | |Note: For type B waveform, the interrupt occurs only at the end of an odd frame.
* |[1] |FEND |End of Frame Interrupt Enable Bit
* | | |An interrupt occurs at the end of a frame.
* | | |0 = End of Frame Interrupt Disabled.
* | | |1 = End of Frame Interrupt Enabled.
* | | |Note: For type B waveform, the interrupt occurs only at the end of an odd frame.
* |[3] |CTOUT |Charging Timeout Interrupt Enable Bit
* | | |An interrupt occurs when the charging timer reaches the timeout value.
* | | |0 = Charging Timeout Interrupt Disabled.
* | | |1 = Charging Timeout Interrupt Enabled.
* @var LCD_T::DATA
* Offset: 0x20 LCD Segment Display Data Register 0
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[7:0] |DD0 |Display Data of Segments S, where S is (4 x N) + 0, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD0 corresponds to SEG00, SEG04, SEG08, SEG12, SEG16, SEG20, SEG24, SEG28, SEG32, SEG36, SEG40, and SEG44.
* | | |Note 2: Each bit, DD0[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD0 (= LCD_DATA07[7:0]) = 1001_0110.
* | | |LCD_DATA07[7:0] corresponds to SEG28 (4 x 7 + 0 = 2.8)
* | | |the pixel SEG28-COM0 is light (LCD_DATA07[0] = .0)
* | | |the pixel SEG28-COM1 is dark (LCD_DATA07[1] = .1)
* | | |the pixel SEG28-COM2 is dark (LCD_DATA07[2] = .1)
* | | |the pixel SEG28-COM3 is light (LCD_DATA07[3] = .0)
* | | |LCD_DATA07[7:4] are ignored, since COMs from 4 to 7 are not used.
* |[15:8] |DD1 |Display Data of Segments S, where S is (4 x N) + 1, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD1 corresponds to SEG01, SEG05, SEG09, SEG13, SEG17, SEG21, SEG25, SEG29, SEG33, SEG37, SEG41, and SEG45.
* | | |Note 2: Each bit, DD1[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD1 (= LCD_DATA07[15:8]) = 1001_0110.
* | | |LCD_DATA07[15:8] corresponds to SEG29 (4 x 7 + 1 = 2.9)
* | | |the pixel SEG29-COM0 is light (LCD_DATA07[8] = .0)
* | | |the pixel SEG29-COM1 is dark (LCD_DATA07[9] = .1)
* | | |the pixel SEG29-COM2 is dark (LCD_DATA07[10] = .1)
* | | |the pixel SEG29-COM3 is light (LCD_DATA07[11] = .0)
* | | |LCD_DATA07[15:12] are ignored, since COMs from 4 to 7 are not used.
* |[23:16] |DD2 |Display Data of Segments S, where S is (4 x N) + 2, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD2 corresponds to SEG02, SEG06, SEG10, SEG14, SEG18, SEG22, SEG26, SEG30, SEG34, SEG38, SEG42, and SEG46.
* | | |Note 2: Each bit, DD2[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD2 (= LCD_DATA07[23:16]) = 1001_0110.
* | | |LCD_DATA07[23:16] corresponds to SEG30 (4 x 7 + 2 = 3.0)
* | | |the pixel SEG30-COM0 is light (LCD_DATA07[16] = .0)
* | | |the pixel SEG30-COM1 is dark (LCD_DATA07[17] = .1)
* | | |the pixel SEG30-COM2 is dark (LCD_DATA07[18] = .1)
* | | |the pixel SEG30-COM3 is light (LCD_DATA07[19] = .0)
* | | |LCD_DATA07[23:20] are ignored, since COMs from 4 to 7 are not used.
* |[31:24] |DD3 |Display Data of Segments S, where S is (4 x N) + 3, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = The pixel is light.
* | | |1 = The pixel is dark.
* | | |Note 1: DD3 corresponds to SEG03, SEG07, SEG11, SEG15, SEG19, SEG23, SEG27, SEG31, SEG35, SEG39, SEG43, and SEG47.
* | | |Note 2: Each bit, DD3[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD3 (= LCD_DATA07[31:24]) = 1001_0110.
* | | |LCD_DATA07[31:24] corresponds to SEG31 (4 x 7 + 3 = 3.1)
* | | |the pixel SEG31-COM0 is light (LCD_DATA07[24] = .0)
* | | |the pixel SEG31-COM1 is dark (LCD_DATA07[25] = .1)
* | | |the pixel SEG31-COM2 is dark (LCD_DATA07[26] = .1)
* | | |the pixel SEG31-COM3 is light (LCD_DATA07[27] = .0)
* | | |LCD_DATA07[31:28] are ignored, since COMs from 4 to 7 are not used.
* Offset: 0x24 LCD Segment Display Data Register 1
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[7:0] |DD0 |Display Data of Segments S, where S is (4 x N) + 0, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD0 corresponds to SEG00, SEG04, SEG08, SEG12, SEG16, SEG20, SEG24, SEG28, SEG32, SEG36, SEG40, and SEG44.
* | | |Note 2: Each bit, DD0[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD0 (= LCD_DATA07[7:0]) = 1001_0110.
* | | |LCD_DATA07[7:0] corresponds to SEG28 (4 x 7 + 0 = 2.8)
* | | |the pixel SEG28-COM0 is light (LCD_DATA07[0] = .0)
* | | |the pixel SEG28-COM1 is dark (LCD_DATA07[1] = .1)
* | | |the pixel SEG28-COM2 is dark (LCD_DATA07[2] = .1)
* | | |the pixel SEG28-COM3 is light (LCD_DATA07[3] = .0)
* | | |LCD_DATA07[7:4] are ignored, since COMs from 4 to 7 are not used.
* |[15:8] |DD1 |Display Data of Segments S, where S is (4 x N) + 1, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD1 corresponds to SEG01, SEG05, SEG09, SEG13, SEG17, SEG21, SEG25, SEG29, SEG33, SEG37, SEG41, and SEG45.
* | | |Note 2: Each bit, DD1[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD1 (= LCD_DATA07[15:8]) = 1001_0110.
* | | |LCD_DATA07[15:8] corresponds to SEG29 (4 x 7 + 1 = 2.9)
* | | |the pixel SEG29-COM0 is light (LCD_DATA07[8] = .0)
* | | |the pixel SEG29-COM1 is dark (LCD_DATA07[9] = .1)
* | | |the pixel SEG29-COM2 is dark (LCD_DATA07[10] = .1)
* | | |the pixel SEG29-COM3 is light (LCD_DATA07[11] = .0)
* | | |LCD_DATA07[15:12] are ignored, since COMs from 4 to 7 are not used.
* |[23:16] |DD2 |Display Data of Segments S, where S is (4 x N) + 2, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD2 corresponds to SEG02, SEG06, SEG10, SEG14, SEG18, SEG22, SEG26, SEG30, SEG34, SEG38, SEG42, and SEG46.
* | | |Note 2: Each bit, DD2[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD2 (= LCD_DATA07[23:16]) = 1001_0110.
* | | |LCD_DATA07[23:16] corresponds to SEG30 (4 x 7 + 2 = 3.0)
* | | |the pixel SEG30-COM0 is light (LCD_DATA07[16] = .0)
* | | |the pixel SEG30-COM1 is dark (LCD_DATA07[17] = .1)
* | | |the pixel SEG30-COM2 is dark (LCD_DATA07[18] = .1)
* | | |the pixel SEG30-COM3 is light (LCD_DATA07[19] = .0)
* | | |LCD_DATA07[23:20] are ignored, since COMs from 4 to 7 are not used.
* |[31:24] |DD3 |Display Data of Segments S, where S is (4 x N) + 3, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = The pixel is light.
* | | |1 = The pixel is dark.
* | | |Note 1: DD3 corresponds to SEG03, SEG07, SEG11, SEG15, SEG19, SEG23, SEG27, SEG31, SEG35, SEG39, SEG43, and SEG47.
* | | |Note 2: Each bit, DD3[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD3 (= LCD_DATA07[31:24]) = 1001_0110.
* | | |LCD_DATA07[31:24] corresponds to SEG31 (4 x 7 + 3 = 3.1)
* | | |the pixel SEG31-COM0 is light (LCD_DATA07[24] = .0)
* | | |the pixel SEG31-COM1 is dark (LCD_DATA07[25] = .1)
* | | |the pixel SEG31-COM2 is dark (LCD_DATA07[26] = .1)
* | | |the pixel SEG31-COM3 is light (LCD_DATA07[27] = .0)
* | | |LCD_DATA07[31:28] are ignored, since COMs from 4 to 7 are not used.
* Offset: 0x28 LCD Segment Display Data Register 2
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[7:0] |DD0 |Display Data of Segments S, where S is (4 x N) + 0, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD0 corresponds to SEG00, SEG04, SEG08, SEG12, SEG16, SEG20, SEG24, SEG28, SEG32, SEG36, SEG40, and SEG44.
* | | |Note 2: Each bit, DD0[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD0 (= LCD_DATA07[7:0]) = 1001_0110.
* | | |LCD_DATA07[7:0] corresponds to SEG28 (4 x 7 + 0 = 2.8)
* | | |the pixel SEG28-COM0 is light (LCD_DATA07[0] = .0)
* | | |the pixel SEG28-COM1 is dark (LCD_DATA07[1] = .1)
* | | |the pixel SEG28-COM2 is dark (LCD_DATA07[2] = .1)
* | | |the pixel SEG28-COM3 is light (LCD_DATA07[3] = .0)
* | | |LCD_DATA07[7:4] are ignored, since COMs from 4 to 7 are not used.
* |[15:8] |DD1 |Display Data of Segments S, where S is (4 x N) + 1, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD1 corresponds to SEG01, SEG05, SEG09, SEG13, SEG17, SEG21, SEG25, SEG29, SEG33, SEG37, SEG41, and SEG45.
* | | |Note 2: Each bit, DD1[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD1 (= LCD_DATA07[15:8]) = 1001_0110.
* | | |LCD_DATA07[15:8] corresponds to SEG29 (4 x 7 + 1 = 2.9)
* | | |the pixel SEG29-COM0 is light (LCD_DATA07[8] = .0)
* | | |the pixel SEG29-COM1 is dark (LCD_DATA07[9] = .1)
* | | |the pixel SEG29-COM2 is dark (LCD_DATA07[10] = .1)
* | | |the pixel SEG29-COM3 is light (LCD_DATA07[11] = .0)
* | | |LCD_DATA07[15:12] are ignored, since COMs from 4 to 7 are not used.
* |[23:16] |DD2 |Display Data of Segments S, where S is (4 x N) + 2, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD2 corresponds to SEG02, SEG06, SEG10, SEG14, SEG18, SEG22, SEG26, SEG30, SEG34, SEG38, SEG42, and SEG46.
* | | |Note 2: Each bit, DD2[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD2 (= LCD_DATA07[23:16]) = 1001_0110.
* | | |LCD_DATA07[23:16] corresponds to SEG30 (4 x 7 + 2 = 3.0)
* | | |the pixel SEG30-COM0 is light (LCD_DATA07[16] = .0)
* | | |the pixel SEG30-COM1 is dark (LCD_DATA07[17] = .1)
* | | |the pixel SEG30-COM2 is dark (LCD_DATA07[18] = .1)
* | | |the pixel SEG30-COM3 is light (LCD_DATA07[19] = .0)
* | | |LCD_DATA07[23:20] are ignored, since COMs from 4 to 7 are not used.
* |[31:24] |DD3 |Display Data of Segments S, where S is (4 x N) + 3, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = The pixel is light.
* | | |1 = The pixel is dark.
* | | |Note 1: DD3 corresponds to SEG03, SEG07, SEG11, SEG15, SEG19, SEG23, SEG27, SEG31, SEG35, SEG39, SEG43, and SEG47.
* | | |Note 2: Each bit, DD3[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD3 (= LCD_DATA07[31:24]) = 1001_0110.
* | | |LCD_DATA07[31:24] corresponds to SEG31 (4 x 7 + 3 = 3.1)
* | | |the pixel SEG31-COM0 is light (LCD_DATA07[24] = .0)
* | | |the pixel SEG31-COM1 is dark (LCD_DATA07[25] = .1)
* | | |the pixel SEG31-COM2 is dark (LCD_DATA07[26] = .1)
* | | |the pixel SEG31-COM3 is light (LCD_DATA07[27] = .0)
* | | |LCD_DATA07[31:28] are ignored, since COMs from 4 to 7 are not used.
* Offset: 0x2C LCD Segment Display Data Register 3
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[7:0] |DD0 |Display Data of Segments S, where S is (4 x N) + 0, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD0 corresponds to SEG00, SEG04, SEG08, SEG12, SEG16, SEG20, SEG24, SEG28, SEG32, SEG36, SEG40, and SEG44.
* | | |Note 2: Each bit, DD0[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD0 (= LCD_DATA07[7:0]) = 1001_0110.
* | | |LCD_DATA07[7:0] corresponds to SEG28 (4 x 7 + 0 = 2.8)
* | | |the pixel SEG28-COM0 is light (LCD_DATA07[0] = .0)
* | | |the pixel SEG28-COM1 is dark (LCD_DATA07[1] = .1)
* | | |the pixel SEG28-COM2 is dark (LCD_DATA07[2] = .1)
* | | |the pixel SEG28-COM3 is light (LCD_DATA07[3] = .0)
* | | |LCD_DATA07[7:4] are ignored, since COMs from 4 to 7 are not used.
* |[15:8] |DD1 |Display Data of Segments S, where S is (4 x N) + 1, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD1 corresponds to SEG01, SEG05, SEG09, SEG13, SEG17, SEG21, SEG25, SEG29, SEG33, SEG37, SEG41, and SEG45.
* | | |Note 2: Each bit, DD1[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD1 (= LCD_DATA07[15:8]) = 1001_0110.
* | | |LCD_DATA07[15:8] corresponds to SEG29 (4 x 7 + 1 = 2.9)
* | | |the pixel SEG29-COM0 is light (LCD_DATA07[8] = .0)
* | | |the pixel SEG29-COM1 is dark (LCD_DATA07[9] = .1)
* | | |the pixel SEG29-COM2 is dark (LCD_DATA07[10] = .1)
* | | |the pixel SEG29-COM3 is light (LCD_DATA07[11] = .0)
* | | |LCD_DATA07[15:12] are ignored, since COMs from 4 to 7 are not used.
* |[23:16] |DD2 |Display Data of Segments S, where S is (4 x N) + 2, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD2 corresponds to SEG02, SEG06, SEG10, SEG14, SEG18, SEG22, SEG26, SEG30, SEG34, SEG38, SEG42, and SEG46.
* | | |Note 2: Each bit, DD2[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD2 (= LCD_DATA07[23:16]) = 1001_0110.
* | | |LCD_DATA07[23:16] corresponds to SEG30 (4 x 7 + 2 = 3.0)
* | | |the pixel SEG30-COM0 is light (LCD_DATA07[16] = .0)
* | | |the pixel SEG30-COM1 is dark (LCD_DATA07[17] = .1)
* | | |the pixel SEG30-COM2 is dark (LCD_DATA07[18] = .1)
* | | |the pixel SEG30-COM3 is light (LCD_DATA07[19] = .0)
* | | |LCD_DATA07[23:20] are ignored, since COMs from 4 to 7 are not used.
* |[31:24] |DD3 |Display Data of Segments S, where S is (4 x N) + 3, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = The pixel is light.
* | | |1 = The pixel is dark.
* | | |Note 1: DD3 corresponds to SEG03, SEG07, SEG11, SEG15, SEG19, SEG23, SEG27, SEG31, SEG35, SEG39, SEG43, and SEG47.
* | | |Note 2: Each bit, DD3[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD3 (= LCD_DATA07[31:24]) = 1001_0110.
* | | |LCD_DATA07[31:24] corresponds to SEG31 (4 x 7 + 3 = 3.1)
* | | |the pixel SEG31-COM0 is light (LCD_DATA07[24] = .0)
* | | |the pixel SEG31-COM1 is dark (LCD_DATA07[25] = .1)
* | | |the pixel SEG31-COM2 is dark (LCD_DATA07[26] = .1)
* | | |the pixel SEG31-COM3 is light (LCD_DATA07[27] = .0)
* | | |LCD_DATA07[31:28] are ignored, since COMs from 4 to 7 are not used.
* Offset: 0x30 LCD Segment Display Data Register 4
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[7:0] |DD0 |Display Data of Segments S, where S is (4 x N) + 0, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD0 corresponds to SEG00, SEG04, SEG08, SEG12, SEG16, SEG20, SEG24, SEG28, SEG32, SEG36, SEG40, and SEG44.
* | | |Note 2: Each bit, DD0[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD0 (= LCD_DATA07[7:0]) = 1001_0110.
* | | |LCD_DATA07[7:0] corresponds to SEG28 (4 x 7 + 0 = 2.8)
* | | |the pixel SEG28-COM0 is light (LCD_DATA07[0] = .0)
* | | |the pixel SEG28-COM1 is dark (LCD_DATA07[1] = .1)
* | | |the pixel SEG28-COM2 is dark (LCD_DATA07[2] = .1)
* | | |the pixel SEG28-COM3 is light (LCD_DATA07[3] = .0)
* | | |LCD_DATA07[7:4] are ignored, since COMs from 4 to 7 are not used.
* |[15:8] |DD1 |Display Data of Segments S, where S is (4 x N) + 1, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD1 corresponds to SEG01, SEG05, SEG09, SEG13, SEG17, SEG21, SEG25, SEG29, SEG33, SEG37, SEG41, and SEG45.
* | | |Note 2: Each bit, DD1[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD1 (= LCD_DATA07[15:8]) = 1001_0110.
* | | |LCD_DATA07[15:8] corresponds to SEG29 (4 x 7 + 1 = 2.9)
* | | |the pixel SEG29-COM0 is light (LCD_DATA07[8] = .0)
* | | |the pixel SEG29-COM1 is dark (LCD_DATA07[9] = .1)
* | | |the pixel SEG29-COM2 is dark (LCD_DATA07[10] = .1)
* | | |the pixel SEG29-COM3 is light (LCD_DATA07[11] = .0)
* | | |LCD_DATA07[15:12] are ignored, since COMs from 4 to 7 are not used.
* |[23:16] |DD2 |Display Data of Segments S, where S is (4 x N) + 2, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD2 corresponds to SEG02, SEG06, SEG10, SEG14, SEG18, SEG22, SEG26, SEG30, SEG34, SEG38, SEG42, and SEG46.
* | | |Note 2: Each bit, DD2[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD2 (= LCD_DATA07[23:16]) = 1001_0110.
* | | |LCD_DATA07[23:16] corresponds to SEG30 (4 x 7 + 2 = 3.0)
* | | |the pixel SEG30-COM0 is light (LCD_DATA07[16] = .0)
* | | |the pixel SEG30-COM1 is dark (LCD_DATA07[17] = .1)
* | | |the pixel SEG30-COM2 is dark (LCD_DATA07[18] = .1)
* | | |the pixel SEG30-COM3 is light (LCD_DATA07[19] = .0)
* | | |LCD_DATA07[23:20] are ignored, since COMs from 4 to 7 are not used.
* |[31:24] |DD3 |Display Data of Segments S, where S is (4 x N) + 3, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = The pixel is light.
* | | |1 = The pixel is dark.
* | | |Note 1: DD3 corresponds to SEG03, SEG07, SEG11, SEG15, SEG19, SEG23, SEG27, SEG31, SEG35, SEG39, SEG43, and SEG47.
* | | |Note 2: Each bit, DD3[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD3 (= LCD_DATA07[31:24]) = 1001_0110.
* | | |LCD_DATA07[31:24] corresponds to SEG31 (4 x 7 + 3 = 3.1)
* | | |the pixel SEG31-COM0 is light (LCD_DATA07[24] = .0)
* | | |the pixel SEG31-COM1 is dark (LCD_DATA07[25] = .1)
* | | |the pixel SEG31-COM2 is dark (LCD_DATA07[26] = .1)
* | | |the pixel SEG31-COM3 is light (LCD_DATA07[27] = .0)
* | | |LCD_DATA07[31:28] are ignored, since COMs from 4 to 7 are not used.
* Offset: 0x34 LCD Segment Display Data Register 5
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[7:0] |DD0 |Display Data of Segments S, where S is (4 x N) + 0, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD0 corresponds to SEG00, SEG04, SEG08, SEG12, SEG16, SEG20, SEG24, SEG28, SEG32, SEG36, SEG40, and SEG44.
* | | |Note 2: Each bit, DD0[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD0 (= LCD_DATA07[7:0]) = 1001_0110.
* | | |LCD_DATA07[7:0] corresponds to SEG28 (4 x 7 + 0 = 2.8)
* | | |the pixel SEG28-COM0 is light (LCD_DATA07[0] = .0)
* | | |the pixel SEG28-COM1 is dark (LCD_DATA07[1] = .1)
* | | |the pixel SEG28-COM2 is dark (LCD_DATA07[2] = .1)
* | | |the pixel SEG28-COM3 is light (LCD_DATA07[3] = .0)
* | | |LCD_DATA07[7:4] are ignored, since COMs from 4 to 7 are not used.
* |[15:8] |DD1 |Display Data of Segments S, where S is (4 x N) + 1, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD1 corresponds to SEG01, SEG05, SEG09, SEG13, SEG17, SEG21, SEG25, SEG29, SEG33, SEG37, SEG41, and SEG45.
* | | |Note 2: Each bit, DD1[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD1 (= LCD_DATA07[15:8]) = 1001_0110.
* | | |LCD_DATA07[15:8] corresponds to SEG29 (4 x 7 + 1 = 2.9)
* | | |the pixel SEG29-COM0 is light (LCD_DATA07[8] = .0)
* | | |the pixel SEG29-COM1 is dark (LCD_DATA07[9] = .1)
* | | |the pixel SEG29-COM2 is dark (LCD_DATA07[10] = .1)
* | | |the pixel SEG29-COM3 is light (LCD_DATA07[11] = .0)
* | | |LCD_DATA07[15:12] are ignored, since COMs from 4 to 7 are not used.
* |[23:16] |DD2 |Display Data of Segments S, where S is (4 x N) + 2, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD2 corresponds to SEG02, SEG06, SEG10, SEG14, SEG18, SEG22, SEG26, SEG30, SEG34, SEG38, SEG42, and SEG46.
* | | |Note 2: Each bit, DD2[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD2 (= LCD_DATA07[23:16]) = 1001_0110.
* | | |LCD_DATA07[23:16] corresponds to SEG30 (4 x 7 + 2 = 3.0)
* | | |the pixel SEG30-COM0 is light (LCD_DATA07[16] = .0)
* | | |the pixel SEG30-COM1 is dark (LCD_DATA07[17] = .1)
* | | |the pixel SEG30-COM2 is dark (LCD_DATA07[18] = .1)
* | | |the pixel SEG30-COM3 is light (LCD_DATA07[19] = .0)
* | | |LCD_DATA07[23:20] are ignored, since COMs from 4 to 7 are not used.
* |[31:24] |DD3 |Display Data of Segments S, where S is (4 x N) + 3, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = The pixel is light.
* | | |1 = The pixel is dark.
* | | |Note 1: DD3 corresponds to SEG03, SEG07, SEG11, SEG15, SEG19, SEG23, SEG27, SEG31, SEG35, SEG39, SEG43, and SEG47.
* | | |Note 2: Each bit, DD3[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD3 (= LCD_DATA07[31:24]) = 1001_0110.
* | | |LCD_DATA07[31:24] corresponds to SEG31 (4 x 7 + 3 = 3.1)
* | | |the pixel SEG31-COM0 is light (LCD_DATA07[24] = .0)
* | | |the pixel SEG31-COM1 is dark (LCD_DATA07[25] = .1)
* | | |the pixel SEG31-COM2 is dark (LCD_DATA07[26] = .1)
* | | |the pixel SEG31-COM3 is light (LCD_DATA07[27] = .0)
* | | |LCD_DATA07[31:28] are ignored, since COMs from 4 to 7 are not used.
* Offset: 0x38 LCD Segment Display Data Register 6
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[7:0] |DD0 |Display Data of Segments S, where S is (4 x N) + 0, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD0 corresponds to SEG00, SEG04, SEG08, SEG12, SEG16, SEG20, SEG24, SEG28, SEG32, SEG36, SEG40, and SEG44.
* | | |Note 2: Each bit, DD0[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD0 (= LCD_DATA07[7:0]) = 1001_0110.
* | | |LCD_DATA07[7:0] corresponds to SEG28 (4 x 7 + 0 = 2.8)
* | | |the pixel SEG28-COM0 is light (LCD_DATA07[0] = .0)
* | | |the pixel SEG28-COM1 is dark (LCD_DATA07[1] = .1)
* | | |the pixel SEG28-COM2 is dark (LCD_DATA07[2] = .1)
* | | |the pixel SEG28-COM3 is light (LCD_DATA07[3] = .0)
* | | |LCD_DATA07[7:4] are ignored, since COMs from 4 to 7 are not used.
* |[15:8] |DD1 |Display Data of Segments S, where S is (4 x N) + 1, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD1 corresponds to SEG01, SEG05, SEG09, SEG13, SEG17, SEG21, SEG25, SEG29, SEG33, SEG37, SEG41, and SEG45.
* | | |Note 2: Each bit, DD1[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD1 (= LCD_DATA07[15:8]) = 1001_0110.
* | | |LCD_DATA07[15:8] corresponds to SEG29 (4 x 7 + 1 = 2.9)
* | | |the pixel SEG29-COM0 is light (LCD_DATA07[8] = .0)
* | | |the pixel SEG29-COM1 is dark (LCD_DATA07[9] = .1)
* | | |the pixel SEG29-COM2 is dark (LCD_DATA07[10] = .1)
* | | |the pixel SEG29-COM3 is light (LCD_DATA07[11] = .0)
* | | |LCD_DATA07[15:12] are ignored, since COMs from 4 to 7 are not used.
* |[23:16] |DD2 |Display Data of Segments S, where S is (4 x N) + 2, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD2 corresponds to SEG02, SEG06, SEG10, SEG14, SEG18, SEG22, SEG26, SEG30, SEG34, SEG38, SEG42, and SEG46.
* | | |Note 2: Each bit, DD2[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD2 (= LCD_DATA07[23:16]) = 1001_0110.
* | | |LCD_DATA07[23:16] corresponds to SEG30 (4 x 7 + 2 = 3.0)
* | | |the pixel SEG30-COM0 is light (LCD_DATA07[16] = .0)
* | | |the pixel SEG30-COM1 is dark (LCD_DATA07[17] = .1)
* | | |the pixel SEG30-COM2 is dark (LCD_DATA07[18] = .1)
* | | |the pixel SEG30-COM3 is light (LCD_DATA07[19] = .0)
* | | |LCD_DATA07[23:20] are ignored, since COMs from 4 to 7 are not used.
* |[31:24] |DD3 |Display Data of Segments S, where S is (4 x N) + 3, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = The pixel is light.
* | | |1 = The pixel is dark.
* | | |Note 1: DD3 corresponds to SEG03, SEG07, SEG11, SEG15, SEG19, SEG23, SEG27, SEG31, SEG35, SEG39, SEG43, and SEG47.
* | | |Note 2: Each bit, DD3[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD3 (= LCD_DATA07[31:24]) = 1001_0110.
* | | |LCD_DATA07[31:24] corresponds to SEG31 (4 x 7 + 3 = 3.1)
* | | |the pixel SEG31-COM0 is light (LCD_DATA07[24] = .0)
* | | |the pixel SEG31-COM1 is dark (LCD_DATA07[25] = .1)
* | | |the pixel SEG31-COM2 is dark (LCD_DATA07[26] = .1)
* | | |the pixel SEG31-COM3 is light (LCD_DATA07[27] = .0)
* | | |LCD_DATA07[31:28] are ignored, since COMs from 4 to 7 are not used.
* Offset: 0x3C LCD Segment Display Data Register 7
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[7:0] |DD0 |Display Data of Segments S, where S is (4 x N) + 0, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD0 corresponds to SEG00, SEG04, SEG08, SEG12, SEG16, SEG20, SEG24, SEG28, SEG32, SEG36, SEG40, and SEG44.
* | | |Note 2: Each bit, DD0[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD0 (= LCD_DATA07[7:0]) = 1001_0110.
* | | |LCD_DATA07[7:0] corresponds to SEG28 (4 x 7 + 0 = 2.8)
* | | |the pixel SEG28-COM0 is light (LCD_DATA07[0] = .0)
* | | |the pixel SEG28-COM1 is dark (LCD_DATA07[1] = .1)
* | | |the pixel SEG28-COM2 is dark (LCD_DATA07[2] = .1)
* | | |the pixel SEG28-COM3 is light (LCD_DATA07[3] = .0)
* | | |LCD_DATA07[7:4] are ignored, since COMs from 4 to 7 are not used.
* |[15:8] |DD1 |Display Data of Segments S, where S is (4 x N) + 1, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD1 corresponds to SEG01, SEG05, SEG09, SEG13, SEG17, SEG21, SEG25, SEG29, SEG33, SEG37, SEG41, and SEG45.
* | | |Note 2: Each bit, DD1[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD1 (= LCD_DATA07[15:8]) = 1001_0110.
* | | |LCD_DATA07[15:8] corresponds to SEG29 (4 x 7 + 1 = 2.9)
* | | |the pixel SEG29-COM0 is light (LCD_DATA07[8] = .0)
* | | |the pixel SEG29-COM1 is dark (LCD_DATA07[9] = .1)
* | | |the pixel SEG29-COM2 is dark (LCD_DATA07[10] = .1)
* | | |the pixel SEG29-COM3 is light (LCD_DATA07[11] = .0)
* | | |LCD_DATA07[15:12] are ignored, since COMs from 4 to 7 are not used.
* |[23:16] |DD2 |Display Data of Segments S, where S is (4 x N) + 2, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD2 corresponds to SEG02, SEG06, SEG10, SEG14, SEG18, SEG22, SEG26, SEG30, SEG34, SEG38, SEG42, and SEG46.
* | | |Note 2: Each bit, DD2[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD2 (= LCD_DATA07[23:16]) = 1001_0110.
* | | |LCD_DATA07[23:16] corresponds to SEG30 (4 x 7 + 2 = 3.0)
* | | |the pixel SEG30-COM0 is light (LCD_DATA07[16] = .0)
* | | |the pixel SEG30-COM1 is dark (LCD_DATA07[17] = .1)
* | | |the pixel SEG30-COM2 is dark (LCD_DATA07[18] = .1)
* | | |the pixel SEG30-COM3 is light (LCD_DATA07[19] = .0)
* | | |LCD_DATA07[23:20] are ignored, since COMs from 4 to 7 are not used.
* |[31:24] |DD3 |Display Data of Segments S, where S is (4 x N) + 3, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = The pixel is light.
* | | |1 = The pixel is dark.
* | | |Note 1: DD3 corresponds to SEG03, SEG07, SEG11, SEG15, SEG19, SEG23, SEG27, SEG31, SEG35, SEG39, SEG43, and SEG47.
* | | |Note 2: Each bit, DD3[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD3 (= LCD_DATA07[31:24]) = 1001_0110.
* | | |LCD_DATA07[31:24] corresponds to SEG31 (4 x 7 + 3 = 3.1)
* | | |the pixel SEG31-COM0 is light (LCD_DATA07[24] = .0)
* | | |the pixel SEG31-COM1 is dark (LCD_DATA07[25] = .1)
* | | |the pixel SEG31-COM2 is dark (LCD_DATA07[26] = .1)
* | | |the pixel SEG31-COM3 is light (LCD_DATA07[27] = .0)
* | | |LCD_DATA07[31:28] are ignored, since COMs from 4 to 7 are not used.
* Offset: 0x40 LCD Segment Display Data Register 8
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[7:0] |DD0 |Display Data of Segments S, where S is (4 x N) + 0, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD0 corresponds to SEG00, SEG04, SEG08, SEG12, SEG16, SEG20, SEG24, SEG28, SEG32, SEG36, SEG40, and SEG44.
* | | |Note 2: Each bit, DD0[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD0 (= LCD_DATA07[7:0]) = 1001_0110.
* | | |LCD_DATA07[7:0] corresponds to SEG28 (4 x 7 + 0 = 2.8)
* | | |the pixel SEG28-COM0 is light (LCD_DATA07[0] = .0)
* | | |the pixel SEG28-COM1 is dark (LCD_DATA07[1] = .1)
* | | |the pixel SEG28-COM2 is dark (LCD_DATA07[2] = .1)
* | | |the pixel SEG28-COM3 is light (LCD_DATA07[3] = .0)
* | | |LCD_DATA07[7:4] are ignored, since COMs from 4 to 7 are not used.
* |[15:8] |DD1 |Display Data of Segments S, where S is (4 x N) + 1, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD1 corresponds to SEG01, SEG05, SEG09, SEG13, SEG17, SEG21, SEG25, SEG29, SEG33, SEG37, SEG41, and SEG45.
* | | |Note 2: Each bit, DD1[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD1 (= LCD_DATA07[15:8]) = 1001_0110.
* | | |LCD_DATA07[15:8] corresponds to SEG29 (4 x 7 + 1 = 2.9)
* | | |the pixel SEG29-COM0 is light (LCD_DATA07[8] = .0)
* | | |the pixel SEG29-COM1 is dark (LCD_DATA07[9] = .1)
* | | |the pixel SEG29-COM2 is dark (LCD_DATA07[10] = .1)
* | | |the pixel SEG29-COM3 is light (LCD_DATA07[11] = .0)
* | | |LCD_DATA07[15:12] are ignored, since COMs from 4 to 7 are not used.
* |[23:16] |DD2 |Display Data of Segments S, where S is (4 x N) + 2, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD2 corresponds to SEG02, SEG06, SEG10, SEG14, SEG18, SEG22, SEG26, SEG30, SEG34, SEG38, SEG42, and SEG46.
* | | |Note 2: Each bit, DD2[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD2 (= LCD_DATA07[23:16]) = 1001_0110.
* | | |LCD_DATA07[23:16] corresponds to SEG30 (4 x 7 + 2 = 3.0)
* | | |the pixel SEG30-COM0 is light (LCD_DATA07[16] = .0)
* | | |the pixel SEG30-COM1 is dark (LCD_DATA07[17] = .1)
* | | |the pixel SEG30-COM2 is dark (LCD_DATA07[18] = .1)
* | | |the pixel SEG30-COM3 is light (LCD_DATA07[19] = .0)
* | | |LCD_DATA07[23:20] are ignored, since COMs from 4 to 7 are not used.
* |[31:24] |DD3 |Display Data of Segments S, where S is (4 x N) + 3, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = The pixel is light.
* | | |1 = The pixel is dark.
* | | |Note 1: DD3 corresponds to SEG03, SEG07, SEG11, SEG15, SEG19, SEG23, SEG27, SEG31, SEG35, SEG39, SEG43, and SEG47.
* | | |Note 2: Each bit, DD3[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD3 (= LCD_DATA07[31:24]) = 1001_0110.
* | | |LCD_DATA07[31:24] corresponds to SEG31 (4 x 7 + 3 = 3.1)
* | | |the pixel SEG31-COM0 is light (LCD_DATA07[24] = .0)
* | | |the pixel SEG31-COM1 is dark (LCD_DATA07[25] = .1)
* | | |the pixel SEG31-COM2 is dark (LCD_DATA07[26] = .1)
* | | |the pixel SEG31-COM3 is light (LCD_DATA07[27] = .0)
* | | |LCD_DATA07[31:28] are ignored, since COMs from 4 to 7 are not used.
* Offset: 0x44 LCD Segment Display Data Register 9
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[7:0] |DD0 |Display Data of Segments S, where S is (4 x N) + 0, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD0 corresponds to SEG00, SEG04, SEG08, SEG12, SEG16, SEG20, SEG24, SEG28, SEG32, SEG36, SEG40, and SEG44.
* | | |Note 2: Each bit, DD0[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD0 (= LCD_DATA07[7:0]) = 1001_0110.
* | | |LCD_DATA07[7:0] corresponds to SEG28 (4 x 7 + 0 = 2.8)
* | | |the pixel SEG28-COM0 is light (LCD_DATA07[0] = .0)
* | | |the pixel SEG28-COM1 is dark (LCD_DATA07[1] = .1)
* | | |the pixel SEG28-COM2 is dark (LCD_DATA07[2] = .1)
* | | |the pixel SEG28-COM3 is light (LCD_DATA07[3] = .0)
* | | |LCD_DATA07[7:4] are ignored, since COMs from 4 to 7 are not used.
* |[15:8] |DD1 |Display Data of Segments S, where S is (4 x N) + 1, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD1 corresponds to SEG01, SEG05, SEG09, SEG13, SEG17, SEG21, SEG25, SEG29, SEG33, SEG37, SEG41, and SEG45.
* | | |Note 2: Each bit, DD1[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD1 (= LCD_DATA07[15:8]) = 1001_0110.
* | | |LCD_DATA07[15:8] corresponds to SEG29 (4 x 7 + 1 = 2.9)
* | | |the pixel SEG29-COM0 is light (LCD_DATA07[8] = .0)
* | | |the pixel SEG29-COM1 is dark (LCD_DATA07[9] = .1)
* | | |the pixel SEG29-COM2 is dark (LCD_DATA07[10] = .1)
* | | |the pixel SEG29-COM3 is light (LCD_DATA07[11] = .0)
* | | |LCD_DATA07[15:12] are ignored, since COMs from 4 to 7 are not used.
* |[23:16] |DD2 |Display Data of Segments S, where S is (4 x N) + 2, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD2 corresponds to SEG02, SEG06, SEG10, SEG14, SEG18, SEG22, SEG26, SEG30, SEG34, SEG38, SEG42, and SEG46.
* | | |Note 2: Each bit, DD2[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD2 (= LCD_DATA07[23:16]) = 1001_0110.
* | | |LCD_DATA07[23:16] corresponds to SEG30 (4 x 7 + 2 = 3.0)
* | | |the pixel SEG30-COM0 is light (LCD_DATA07[16] = .0)
* | | |the pixel SEG30-COM1 is dark (LCD_DATA07[17] = .1)
* | | |the pixel SEG30-COM2 is dark (LCD_DATA07[18] = .1)
* | | |the pixel SEG30-COM3 is light (LCD_DATA07[19] = .0)
* | | |LCD_DATA07[23:20] are ignored, since COMs from 4 to 7 are not used.
* |[31:24] |DD3 |Display Data of Segments S, where S is (4 x N) + 3, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = The pixel is light.
* | | |1 = The pixel is dark.
* | | |Note 1: DD3 corresponds to SEG03, SEG07, SEG11, SEG15, SEG19, SEG23, SEG27, SEG31, SEG35, SEG39, SEG43, and SEG47.
* | | |Note 2: Each bit, DD3[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD3 (= LCD_DATA07[31:24]) = 1001_0110.
* | | |LCD_DATA07[31:24] corresponds to SEG31 (4 x 7 + 3 = 3.1)
* | | |the pixel SEG31-COM0 is light (LCD_DATA07[24] = .0)
* | | |the pixel SEG31-COM1 is dark (LCD_DATA07[25] = .1)
* | | |the pixel SEG31-COM2 is dark (LCD_DATA07[26] = .1)
* | | |the pixel SEG31-COM3 is light (LCD_DATA07[27] = .0)
* | | |LCD_DATA07[31:28] are ignored, since COMs from 4 to 7 are not used.
* Offset: 0x48 LCD Segment Display Data Register 10
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[7:0] |DD0 |Display Data of Segments S, where S is (4 x N) + 0, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD0 corresponds to SEG00, SEG04, SEG08, SEG12, SEG16, SEG20, SEG24, SEG28, SEG32, SEG36, SEG40, and SEG44.
* | | |Note 2: Each bit, DD0[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD0 (= LCD_DATA07[7:0]) = 1001_0110.
* | | |LCD_DATA07[7:0] corresponds to SEG28 (4 x 7 + 0 = 2.8)
* | | |the pixel SEG28-COM0 is light (LCD_DATA07[0] = .0)
* | | |the pixel SEG28-COM1 is dark (LCD_DATA07[1] = .1)
* | | |the pixel SEG28-COM2 is dark (LCD_DATA07[2] = .1)
* | | |the pixel SEG28-COM3 is light (LCD_DATA07[3] = .0)
* | | |LCD_DATA07[7:4] are ignored, since COMs from 4 to 7 are not used.
* |[15:8] |DD1 |Display Data of Segments S, where S is (4 x N) + 1, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD1 corresponds to SEG01, SEG05, SEG09, SEG13, SEG17, SEG21, SEG25, SEG29, SEG33, SEG37, SEG41, and SEG45.
* | | |Note 2: Each bit, DD1[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD1 (= LCD_DATA07[15:8]) = 1001_0110.
* | | |LCD_DATA07[15:8] corresponds to SEG29 (4 x 7 + 1 = 2.9)
* | | |the pixel SEG29-COM0 is light (LCD_DATA07[8] = .0)
* | | |the pixel SEG29-COM1 is dark (LCD_DATA07[9] = .1)
* | | |the pixel SEG29-COM2 is dark (LCD_DATA07[10] = .1)
* | | |the pixel SEG29-COM3 is light (LCD_DATA07[11] = .0)
* | | |LCD_DATA07[15:12] are ignored, since COMs from 4 to 7 are not used.
* |[23:16] |DD2 |Display Data of Segments S, where S is (4 x N) + 2, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD2 corresponds to SEG02, SEG06, SEG10, SEG14, SEG18, SEG22, SEG26, SEG30, SEG34, SEG38, SEG42, and SEG46.
* | | |Note 2: Each bit, DD2[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD2 (= LCD_DATA07[23:16]) = 1001_0110.
* | | |LCD_DATA07[23:16] corresponds to SEG30 (4 x 7 + 2 = 3.0)
* | | |the pixel SEG30-COM0 is light (LCD_DATA07[16] = .0)
* | | |the pixel SEG30-COM1 is dark (LCD_DATA07[17] = .1)
* | | |the pixel SEG30-COM2 is dark (LCD_DATA07[18] = .1)
* | | |the pixel SEG30-COM3 is light (LCD_DATA07[19] = .0)
* | | |LCD_DATA07[23:20] are ignored, since COMs from 4 to 7 are not used.
* |[31:24] |DD3 |Display Data of Segments S, where S is (4 x N) + 3, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = The pixel is light.
* | | |1 = The pixel is dark.
* | | |Note 1: DD3 corresponds to SEG03, SEG07, SEG11, SEG15, SEG19, SEG23, SEG27, SEG31, SEG35, SEG39, SEG43, and SEG47.
* | | |Note 2: Each bit, DD3[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD3 (= LCD_DATA07[31:24]) = 1001_0110.
* | | |LCD_DATA07[31:24] corresponds to SEG31 (4 x 7 + 3 = 3.1)
* | | |the pixel SEG31-COM0 is light (LCD_DATA07[24] = .0)
* | | |the pixel SEG31-COM1 is dark (LCD_DATA07[25] = .1)
* | | |the pixel SEG31-COM2 is dark (LCD_DATA07[26] = .1)
* | | |the pixel SEG31-COM3 is light (LCD_DATA07[27] = .0)
* | | |LCD_DATA07[31:28] are ignored, since COMs from 4 to 7 are not used.
* Offset: 0x4C LCD Segment Display Data Register 11
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[7:0] |DD0 |Display Data of Segments S, where S is (4 x N) + 0, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD0 corresponds to SEG00, SEG04, SEG08, SEG12, SEG16, SEG20, SEG24, SEG28, SEG32, SEG36, SEG40, and SEG44.
* | | |Note 2: Each bit, DD0[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD0 (= LCD_DATA07[7:0]) = 1001_0110.
* | | |LCD_DATA07[7:0] corresponds to SEG28 (4 x 7 + 0 = 2.8)
* | | |the pixel SEG28-COM0 is light (LCD_DATA07[0] = .0)
* | | |the pixel SEG28-COM1 is dark (LCD_DATA07[1] = .1)
* | | |the pixel SEG28-COM2 is dark (LCD_DATA07[2] = .1)
* | | |the pixel SEG28-COM3 is light (LCD_DATA07[3] = .0)
* | | |LCD_DATA07[7:4] are ignored, since COMs from 4 to 7 are not used.
* |[15:8] |DD1 |Display Data of Segments S, where S is (4 x N) + 1, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD1 corresponds to SEG01, SEG05, SEG09, SEG13, SEG17, SEG21, SEG25, SEG29, SEG33, SEG37, SEG41, and SEG45.
* | | |Note 2: Each bit, DD1[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD1 (= LCD_DATA07[15:8]) = 1001_0110.
* | | |LCD_DATA07[15:8] corresponds to SEG29 (4 x 7 + 1 = 2.9)
* | | |the pixel SEG29-COM0 is light (LCD_DATA07[8] = .0)
* | | |the pixel SEG29-COM1 is dark (LCD_DATA07[9] = .1)
* | | |the pixel SEG29-COM2 is dark (LCD_DATA07[10] = .1)
* | | |the pixel SEG29-COM3 is light (LCD_DATA07[11] = .0)
* | | |LCD_DATA07[15:12] are ignored, since COMs from 4 to 7 are not used.
* |[23:16] |DD2 |Display Data of Segments S, where S is (4 x N) + 2, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = the pixel is light.
* | | |1 = the pixel is dark.
* | | |Note 1: DD2 corresponds to SEG02, SEG06, SEG10, SEG14, SEG18, SEG22, SEG26, SEG30, SEG34, SEG38, SEG42, and SEG46.
* | | |Note 2: Each bit, DD2[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD2 (= LCD_DATA07[23:16]) = 1001_0110.
* | | |LCD_DATA07[23:16] corresponds to SEG30 (4 x 7 + 2 = 3.0)
* | | |the pixel SEG30-COM0 is light (LCD_DATA07[16] = .0)
* | | |the pixel SEG30-COM1 is dark (LCD_DATA07[17] = .1)
* | | |the pixel SEG30-COM2 is dark (LCD_DATA07[18] = .1)
* | | |the pixel SEG30-COM3 is light (LCD_DATA07[19] = .0)
* | | |LCD_DATA07[23:20] are ignored, since COMs from 4 to 7 are not used.
* |[31:24] |DD3 |Display Data of Segments S, where S is (4 x N) + 3, and N is 0, 1, 2, u2026, 11
* | | |Each bit specifies the brightness of each pixel in a segment.
* | | |0 = The pixel is light.
* | | |1 = The pixel is dark.
* | | |Note 1: DD3 corresponds to SEG03, SEG07, SEG11, SEG15, SEG19, SEG23, SEG27, SEG31, SEG35, SEG39, SEG43, and SEG47.
* | | |Note 2: Each bit, DD3[n], corresponds to COMn, n = 0-7.
* | | |[Example] Assuming 1/4 Duty, and DD3 (= LCD_DATA07[31:24]) = 1001_0110.
* | | |LCD_DATA07[31:24] corresponds to SEG31 (4 x 7 + 3 = 3.1)
* | | |the pixel SEG31-COM0 is light (LCD_DATA07[24] = .0)
* | | |the pixel SEG31-COM1 is dark (LCD_DATA07[25] = .1)
* | | |the pixel SEG31-COM2 is dark (LCD_DATA07[26] = .1)
* | | |the pixel SEG31-COM3 is light (LCD_DATA07[27] = .0)
* | | |LCD_DATA07[31:28] are ignored, since COMs from 4 to 7 are not used.
*/
__IO uint32_t CTL; /*!< [0x0000] LCD Control Register */
__IO uint32_t PSET; /*!< [0x0004] LCD Panel Setting Register */
__IO uint32_t FSET; /*!< [0x0008] LCD Frame Setting Register */
__IO uint32_t DSET; /*!< [0x000c] LCD Driving Setting Register */
__IO uint32_t OSET; /*!< [0x0010] LCD Output Setting Register */
__IO uint32_t STS; /*!< [0x0014] LCD Status Register */
__IO uint32_t INTEN; /*!< [0x0018] LCD Interrupt Enable Register */
__I uint32_t RESERVE0;
__IO uint32_t DATA[12]; /*!< [0x0020- 0x004C] LCD Segment Display Data Register 0-11 */
} LCD_T;
/**
@addtogroup LCD_CONST LCD Bit Field Definition
Constant Definitions for LCD Controller
@{ */
#define LCD_CTL_EN_Pos (0) /*!< LCD_T::CTL: EN Position */
#define LCD_CTL_EN_Msk (0x1ul << LCD_CTL_EN_Pos) /*!< LCD_T::CTL: EN Mask */
#define LCD_CTL_SYNC_Pos (31) /*!< LCD_T::CTL: SYNC Position */
#define LCD_CTL_SYNC_Msk (0x1ul << LCD_CTL_SYNC_Pos) /*!< LCD_T::CTL: SYNC Mask */
#define LCD_PSET_BIAS_Pos (0) /*!< LCD_T::PSET: BIAS Position */
#define LCD_PSET_BIAS_Msk (0x3ul << LCD_PSET_BIAS_Pos) /*!< LCD_T::PSET: BIAS Mask */
#define LCD_PSET_DUTY_Pos (2) /*!< LCD_T::PSET: DUTY Position */
#define LCD_PSET_DUTY_Msk (0x7ul << LCD_PSET_DUTY_Pos) /*!< LCD_T::PSET: DUTY Mask */
#define LCD_PSET_TYPE_Pos (5) /*!< LCD_T::PSET: TYPE Position */
#define LCD_PSET_TYPE_Msk (0x1ul << LCD_PSET_TYPE_Pos) /*!< LCD_T::PSET: TYPE Mask */
#define LCD_PSET_INV_Pos (6) /*!< LCD_T::PSET: INV Position */
#define LCD_PSET_INV_Msk (0x1ul << LCD_PSET_INV_Pos) /*!< LCD_T::PSET: INV Mask */
#define LCD_PSET_FREQDIV_Pos (8) /*!< LCD_T::PSET: FREQDIV Position */
#define LCD_PSET_FREQDIV_Msk (0x3fful << LCD_PSET_FREQDIV_Pos) /*!< LCD_T::PSET: FREQDIV Mask */
#define LCD_PSET_VSEL_Pos (18) /*!< LCD_T::PSET: VSEL Position */
#define LCD_PSET_VSEL_Msk (0xful << LCD_PSET_VSEL_Pos) /*!< LCD_T::PSET: VSEL Mask */
#define LCD_PSET_VTUNE_Pos (24) /*!< LCD_T::PSET: VTUNE Position */
#define LCD_PSET_VTUNE_Msk (0xful << LCD_PSET_VTUNE_Pos) /*!< LCD_T::PSET: VTUNE Mask */
#define LCD_FSET_BLINK_Pos (0) /*!< LCD_T::FSET: BLINK Position */
#define LCD_FSET_BLINK_Msk (0x1ul << LCD_FSET_BLINK_Pos) /*!< LCD_T::FSET: BLINK Mask */
#define LCD_FSET_FCV_Pos (8) /*!< LCD_T::FSET: FCV Position */
#define LCD_FSET_FCV_Msk (0x3fful << LCD_FSET_FCV_Pos) /*!< LCD_T::FSET: FCV Mask */
#define LCD_FSET_PTYPE_Pos (19) /*!< LCD_T::FSET: PTYPE Position */
#define LCD_FSET_PTYPE_Msk (0x1ul << LCD_FSET_PTYPE_Pos) /*!< LCD_T::FSET: PTYPE Mask */
#define LCD_FSET_PTIME_Pos (20) /*!< LCD_T::FSET: PTIME Position */
#define LCD_FSET_PTIME_Msk (0xful << LCD_FSET_PTIME_Pos) /*!< LCD_T::FSET: PTIME Mask */
#define LCD_DSET_VSRC_Pos (0) /*!< LCD_T::DSET: VSRC Position */
#define LCD_DSET_VSRC_Msk (0x3ul << LCD_DSET_VSRC_Pos) /*!< LCD_T::DSET: VSRC Mask */
#define LCD_DSET_RESMODE_Pos (2) /*!< LCD_T::DSET: RESMODE Position */
#define LCD_DSET_RESMODE_Msk (0x1ul << LCD_DSET_RESMODE_Pos) /*!< LCD_T::DSET: RESMODE Mask */
#define LCD_DSET_BUFEN_Pos (3) /*!< LCD_T::DSET: BUFEN Position */
#define LCD_DSET_BUFEN_Msk (0x1ul << LCD_DSET_BUFEN_Pos) /*!< LCD_T::DSET: BUFEN Mask */
#define LCD_DSET_PSVEN_Pos (4) /*!< LCD_T::DSET: PSVEN Position */
#define LCD_DSET_PSVEN_Msk (0x1ul << LCD_DSET_PSVEN_Pos) /*!< LCD_T::DSET: PSVEN Mask */
#define LCD_DSET_PSVREV_Pos (5) /*!< LCD_T::DSET: PSVREV Position */
#define LCD_DSET_PSVREV_Msk (0x1ul << LCD_DSET_PSVREV_Pos) /*!< LCD_T::DSET: PSVREV Mask */
#define LCD_DSET_PSVT1_Pos (8) /*!< LCD_T::DSET: PSVT1 Position */
#define LCD_DSET_PSVT1_Msk (0xful << LCD_DSET_PSVT1_Pos) /*!< LCD_T::DSET: PSVT1 Mask */
#define LCD_DSET_PSVT2_Pos (12) /*!< LCD_T::DSET: PSVT2 Position */
#define LCD_DSET_PSVT2_Msk (0xful << LCD_DSET_PSVT2_Pos) /*!< LCD_T::DSET: PSVT2 Mask */
#define LCD_DSET_CTOUT_Pos (16) /*!< LCD_T::DSET: CTOUT Position */
#define LCD_DSET_CTOUT_Msk (0x1ffful << LCD_DSET_CTOUT_Pos) /*!< LCD_T::DSET: CTOUT Mask */
#define LCD_OSET_SEL8_Pos (0) /*!< LCD_T::OSET: SEL8 Position */
#define LCD_OSET_SEL8_Msk (0x1ul << LCD_OSET_SEL8_Pos) /*!< LCD_T::OSET: SEL8 Mask */
#define LCD_OSET_SEL9_Pos (1) /*!< LCD_T::OSET: SEL9 Position */
#define LCD_OSET_SEL9_Msk (0x1ul << LCD_OSET_SEL9_Pos) /*!< LCD_T::OSET: SEL9 Mask */
#define LCD_OSET_SEL10_Pos (2) /*!< LCD_T::OSET: SEL10 Position */
#define LCD_OSET_SEL10_Msk (0x1ul << LCD_OSET_SEL10_Pos) /*!< LCD_T::OSET: SEL10 Mask */
#define LCD_OSET_SEL11_Pos (3) /*!< LCD_T::OSET: SEL11 Position */
#define LCD_OSET_SEL11_Msk (0x1ul << LCD_OSET_SEL11_Pos) /*!< LCD_T::OSET: SEL11 Mask */
#define LCD_OSET_SEL12_Pos (4) /*!< LCD_T::OSET: SEL12 Position */
#define LCD_OSET_SEL12_Msk (0x1ul << LCD_OSET_SEL12_Pos) /*!< LCD_T::OSET: SEL12 Mask */
#define LCD_OSET_SEL13_Pos (5) /*!< LCD_T::OSET: SEL13 Position */
#define LCD_OSET_SEL13_Msk (0x1ul << LCD_OSET_SEL13_Pos) /*!< LCD_T::OSET: SEL13 Mask */
#define LCD_OSET_SEL14_Pos (6) /*!< LCD_T::OSET: SEL14 Position */
#define LCD_OSET_SEL14_Msk (0x1ul << LCD_OSET_SEL14_Pos) /*!< LCD_T::OSET: SEL14 Mask */
#define LCD_OSET_SEL15_Pos (7) /*!< LCD_T::OSET: SEL15 Position */
#define LCD_OSET_SEL15_Msk (0x1ul << LCD_OSET_SEL15_Pos) /*!< LCD_T::OSET: SEL15 Mask */
#define LCD_OSET_SEL24_Pos (8) /*!< LCD_T::OSET: SEL24 Position */
#define LCD_OSET_SEL24_Msk (0x1ul << LCD_OSET_SEL24_Pos) /*!< LCD_T::OSET: SEL24 Mask */
#define LCD_OSET_SEL25_Pos (9) /*!< LCD_T::OSET: SEL25 Position */
#define LCD_OSET_SEL25_Msk (0x1ul << LCD_OSET_SEL25_Pos) /*!< LCD_T::OSET: SEL25 Mask */
#define LCD_OSET_SEL26_Pos (10) /*!< LCD_T::OSET: SEL26 Position */
#define LCD_OSET_SEL26_Msk (0x1ul << LCD_OSET_SEL26_Pos) /*!< LCD_T::OSET: SEL26 Mask */
#define LCD_OSET_SEL27_Pos (11) /*!< LCD_T::OSET: SEL27 Position */
#define LCD_OSET_SEL27_Msk (0x1ul << LCD_OSET_SEL27_Pos) /*!< LCD_T::OSET: SEL27 Mask */
#define LCD_OSET_SEL28_Pos (12) /*!< LCD_T::OSET: SEL28 Position */
#define LCD_OSET_SEL28_Msk (0x1ul << LCD_OSET_SEL28_Pos) /*!< LCD_T::OSET: SEL28 Mask */
#define LCD_OSET_SEL29_Pos (13) /*!< LCD_T::OSET: SEL29 Position */
#define LCD_OSET_SEL29_Msk (0x1ul << LCD_OSET_SEL29_Pos) /*!< LCD_T::OSET: SEL29 Mask */
#define LCD_OSET_SEL35_Pos (14) /*!< LCD_T::OSET: SEL35 Position */
#define LCD_OSET_SEL35_Msk (0x3ul << LCD_OSET_SEL35_Pos) /*!< LCD_T::OSET: SEL35 Mask */
#define LCD_OSET_SEL36_Pos (16) /*!< LCD_T::OSET: SEL36 Position */
#define LCD_OSET_SEL36_Msk (0x3ul << LCD_OSET_SEL36_Pos) /*!< LCD_T::OSET: SEL36 Mask */
#define LCD_OSET_SEL37_Pos (18) /*!< LCD_T::OSET: SEL37 Position */
#define LCD_OSET_SEL37_Msk (0x3ul << LCD_OSET_SEL37_Pos) /*!< LCD_T::OSET: SEL37 Mask */
#define LCD_OSET_SEL38_Pos (20) /*!< LCD_T::OSET: SEL38 Position */
#define LCD_OSET_SEL38_Msk (0x3ul << LCD_OSET_SEL38_Pos) /*!< LCD_T::OSET: SEL38 Mask */
#define LCD_OSET_SEL41_Pos (22) /*!< LCD_T::OSET: SEL41 Position */
#define LCD_OSET_SEL41_Msk (0x1ul << LCD_OSET_SEL41_Pos) /*!< LCD_T::OSET: SEL41 Mask */
#define LCD_OSET_SEL42_Pos (23) /*!< LCD_T::OSET: SEL42 Position */
#define LCD_OSET_SEL42_Msk (0x1ul << LCD_OSET_SEL42_Pos) /*!< LCD_T::OSET: SEL42 Mask */
#define LCD_OSET_SEL47_Pos (24) /*!< LCD_T::OSET: SEL47 Position */
#define LCD_OSET_SEL47_Msk (0x1ul << LCD_OSET_SEL47_Pos) /*!< LCD_T::OSET: SEL47 Mask */
#define LCD_OSET_SEL48_Pos (25) /*!< LCD_T::OSET: SEL48 Position */
#define LCD_OSET_SEL48_Msk (0x1ul << LCD_OSET_SEL48_Pos) /*!< LCD_T::OSET: SEL48 Mask */
#define LCD_OSET_SEL49_Pos (26) /*!< LCD_T::OSET: SEL49 Position */
#define LCD_OSET_SEL49_Msk (0x1ul << LCD_OSET_SEL49_Pos) /*!< LCD_T::OSET: SEL49 Mask */
#define LCD_STS_FCEND_Pos (0) /*!< LCD_T::STS: FCEND Position */
#define LCD_STS_FCEND_Msk (0x1ul << LCD_STS_FCEND_Pos) /*!< LCD_T::STS: FCEND Mask */
#define LCD_STS_FEND_Pos (1) /*!< LCD_T::STS: FEND Position */
#define LCD_STS_FEND_Msk (0x1ul << LCD_STS_FEND_Pos) /*!< LCD_T::STS: FEND Mask */
#define LCD_STS_CTOUT_Pos (2) /*!< LCD_T::STS: CTOUT Position */
#define LCD_STS_CTOUT_Msk (0x1ul << LCD_STS_CTOUT_Pos) /*!< LCD_T::STS: CTOUT Mask */
#define LCD_STS_CTIME_Pos (16) /*!< LCD_T::STS: CTIME Position */
#define LCD_STS_CTIME_Msk (0x1ffful << LCD_STS_CTIME_Pos) /*!< LCD_T::STS: CTIME Mask */
#define LCD_INTEN_FCEND_Pos (0) /*!< LCD_T::INTEN: FCEND Position */
#define LCD_INTEN_FCEND_Msk (0x1ul << LCD_INTEN_FCEND_Pos) /*!< LCD_T::INTEN: FCEND Mask */
#define LCD_INTEN_FEND_Pos (1) /*!< LCD_T::INTEN: FEND Position */
#define LCD_INTEN_FEND_Msk (0x1ul << LCD_INTEN_FEND_Pos) /*!< LCD_T::INTEN: FEND Mask */
#define LCD_INTEN_CTOUT_Pos (2) /*!< LCD_T::INTEN: CTOUT Position */
#define LCD_INTEN_CTOUT_Msk (0x1ul << LCD_INTEN_CTOUT_Pos) /*!< LCD_T::INTEN: CTOUT Mask */
#define LCD_DATA00_DD0_Pos (0) /*!< LCD_T::DATA00: DD0 Position */
#define LCD_DATA00_DD0_Msk (0xfful << LCD_DATA00_DD0_Pos) /*!< LCD_T::DATA00: DD0 Mask */
#define LCD_DATA00_DD1_Pos (8) /*!< LCD_T::DATA00: DD1 Position */
#define LCD_DATA00_DD1_Msk (0xfful << LCD_DATA00_DD1_Pos) /*!< LCD_T::DATA00: DD1 Mask */
#define LCD_DATA00_DD2_Pos (16) /*!< LCD_T::DATA00: DD2 Position */
#define LCD_DATA00_DD2_Msk (0xfful << LCD_DATA00_DD2_Pos) /*!< LCD_T::DATA00: DD2 Mask */
#define LCD_DATA00_DD3_Pos (24) /*!< LCD_T::DATA00: DD3 Position */
#define LCD_DATA00_DD3_Msk (0xfful << LCD_DATA00_DD3_Pos) /*!< LCD_T::DATA00: DD3 Mask */
#define LCD_DATA01_DD0_Pos (0) /*!< LCD_T::DATA01: DD0 Position */
#define LCD_DATA01_DD0_Msk (0xfful << LCD_DATA01_DD0_Pos) /*!< LCD_T::DATA01: DD0 Mask */
#define LCD_DATA01_DD1_Pos (8) /*!< LCD_T::DATA01: DD1 Position */
#define LCD_DATA01_DD1_Msk (0xfful << LCD_DATA01_DD1_Pos) /*!< LCD_T::DATA01: DD1 Mask */
#define LCD_DATA01_DD2_Pos (16) /*!< LCD_T::DATA01: DD2 Position */
#define LCD_DATA01_DD2_Msk (0xfful << LCD_DATA01_DD2_Pos) /*!< LCD_T::DATA01: DD2 Mask */
#define LCD_DATA01_DD3_Pos (24) /*!< LCD_T::DATA01: DD3 Position */
#define LCD_DATA01_DD3_Msk (0xfful << LCD_DATA01_DD3_Pos) /*!< LCD_T::DATA01: DD3 Mask */
#define LCD_DATA02_DD0_Pos (0) /*!< LCD_T::DATA02: DD0 Position */
#define LCD_DATA02_DD0_Msk (0xfful << LCD_DATA02_DD0_Pos) /*!< LCD_T::DATA02: DD0 Mask */
#define LCD_DATA02_DD1_Pos (8) /*!< LCD_T::DATA02: DD1 Position */
#define LCD_DATA02_DD1_Msk (0xfful << LCD_DATA02_DD1_Pos) /*!< LCD_T::DATA02: DD1 Mask */
#define LCD_DATA02_DD2_Pos (16) /*!< LCD_T::DATA02: DD2 Position */
#define LCD_DATA02_DD2_Msk (0xfful << LCD_DATA02_DD2_Pos) /*!< LCD_T::DATA02: DD2 Mask */
#define LCD_DATA02_DD3_Pos (24) /*!< LCD_T::DATA02: DD3 Position */
#define LCD_DATA02_DD3_Msk (0xfful << LCD_DATA02_DD3_Pos) /*!< LCD_T::DATA02: DD3 Mask */
#define LCD_DATA03_DD0_Pos (0) /*!< LCD_T::DATA03: DD0 Position */
#define LCD_DATA03_DD0_Msk (0xfful << LCD_DATA03_DD0_Pos) /*!< LCD_T::DATA03: DD0 Mask */
#define LCD_DATA03_DD1_Pos (8) /*!< LCD_T::DATA03: DD1 Position */
#define LCD_DATA03_DD1_Msk (0xfful << LCD_DATA03_DD1_Pos) /*!< LCD_T::DATA03: DD1 Mask */
#define LCD_DATA03_DD2_Pos (16) /*!< LCD_T::DATA03: DD2 Position */
#define LCD_DATA03_DD2_Msk (0xfful << LCD_DATA03_DD2_Pos) /*!< LCD_T::DATA03: DD2 Mask */
#define LCD_DATA03_DD3_Pos (24) /*!< LCD_T::DATA03: DD3 Position */
#define LCD_DATA03_DD3_Msk (0xfful << LCD_DATA03_DD3_Pos) /*!< LCD_T::DATA03: DD3 Mask */
#define LCD_DATA04_DD0_Pos (0) /*!< LCD_T::DATA04: DD0 Position */
#define LCD_DATA04_DD0_Msk (0xfful << LCD_DATA04_DD0_Pos) /*!< LCD_T::DATA04: DD0 Mask */
#define LCD_DATA04_DD1_Pos (8) /*!< LCD_T::DATA04: DD1 Position */
#define LCD_DATA04_DD1_Msk (0xfful << LCD_DATA04_DD1_Pos) /*!< LCD_T::DATA04: DD1 Mask */
#define LCD_DATA04_DD2_Pos (16) /*!< LCD_T::DATA04: DD2 Position */
#define LCD_DATA04_DD2_Msk (0xfful << LCD_DATA04_DD2_Pos) /*!< LCD_T::DATA04: DD2 Mask */
#define LCD_DATA04_DD3_Pos (24) /*!< LCD_T::DATA04: DD3 Position */
#define LCD_DATA04_DD3_Msk (0xfful << LCD_DATA04_DD3_Pos) /*!< LCD_T::DATA04: DD3 Mask */
#define LCD_DATA05_DD0_Pos (0) /*!< LCD_T::DATA05: DD0 Position */
#define LCD_DATA05_DD0_Msk (0xfful << LCD_DATA05_DD0_Pos) /*!< LCD_T::DATA05: DD0 Mask */
#define LCD_DATA05_DD1_Pos (8) /*!< LCD_T::DATA05: DD1 Position */
#define LCD_DATA05_DD1_Msk (0xfful << LCD_DATA05_DD1_Pos) /*!< LCD_T::DATA05: DD1 Mask */
#define LCD_DATA05_DD2_Pos (16) /*!< LCD_T::DATA05: DD2 Position */
#define LCD_DATA05_DD2_Msk (0xfful << LCD_DATA05_DD2_Pos) /*!< LCD_T::DATA05: DD2 Mask */
#define LCD_DATA05_DD3_Pos (24) /*!< LCD_T::DATA05: DD3 Position */
#define LCD_DATA05_DD3_Msk (0xfful << LCD_DATA05_DD3_Pos) /*!< LCD_T::DATA05: DD3 Mask */
#define LCD_DATA06_DD0_Pos (0) /*!< LCD_T::DATA06: DD0 Position */
#define LCD_DATA06_DD0_Msk (0xfful << LCD_DATA06_DD0_Pos) /*!< LCD_T::DATA06: DD0 Mask */
#define LCD_DATA06_DD1_Pos (8) /*!< LCD_T::DATA06: DD1 Position */
#define LCD_DATA06_DD1_Msk (0xfful << LCD_DATA06_DD1_Pos) /*!< LCD_T::DATA06: DD1 Mask */
#define LCD_DATA06_DD2_Pos (16) /*!< LCD_T::DATA06: DD2 Position */
#define LCD_DATA06_DD2_Msk (0xfful << LCD_DATA06_DD2_Pos) /*!< LCD_T::DATA06: DD2 Mask */
#define LCD_DATA06_DD3_Pos (24) /*!< LCD_T::DATA06: DD3 Position */
#define LCD_DATA06_DD3_Msk (0xfful << LCD_DATA06_DD3_Pos) /*!< LCD_T::DATA06: DD3 Mask */
#define LCD_DATA07_DD0_Pos (0) /*!< LCD_T::DATA07: DD0 Position */
#define LCD_DATA07_DD0_Msk (0xfful << LCD_DATA07_DD0_Pos) /*!< LCD_T::DATA07: DD0 Mask */
#define LCD_DATA07_DD1_Pos (8) /*!< LCD_T::DATA07: DD1 Position */
#define LCD_DATA07_DD1_Msk (0xfful << LCD_DATA07_DD1_Pos) /*!< LCD_T::DATA07: DD1 Mask */
#define LCD_DATA07_DD2_Pos (16) /*!< LCD_T::DATA07: DD2 Position */
#define LCD_DATA07_DD2_Msk (0xfful << LCD_DATA07_DD2_Pos) /*!< LCD_T::DATA07: DD2 Mask */
#define LCD_DATA07_DD3_Pos (24) /*!< LCD_T::DATA07: DD3 Position */
#define LCD_DATA07_DD3_Msk (0xfful << LCD_DATA07_DD3_Pos) /*!< LCD_T::DATA07: DD3 Mask */
#define LCD_DATA08_DD0_Pos (0) /*!< LCD_T::DATA08: DD0 Position */
#define LCD_DATA08_DD0_Msk (0xfful << LCD_DATA08_DD0_Pos) /*!< LCD_T::DATA08: DD0 Mask */
#define LCD_DATA08_DD1_Pos (8) /*!< LCD_T::DATA08: DD1 Position */
#define LCD_DATA08_DD1_Msk (0xfful << LCD_DATA08_DD1_Pos) /*!< LCD_T::DATA08: DD1 Mask */
#define LCD_DATA08_DD2_Pos (16) /*!< LCD_T::DATA08: DD2 Position */
#define LCD_DATA08_DD2_Msk (0xfful << LCD_DATA08_DD2_Pos) /*!< LCD_T::DATA08: DD2 Mask */
#define LCD_DATA08_DD3_Pos (24) /*!< LCD_T::DATA08: DD3 Position */
#define LCD_DATA08_DD3_Msk (0xfful << LCD_DATA08_DD3_Pos) /*!< LCD_T::DATA08: DD3 Mask */
#define LCD_DATA09_DD0_Pos (0) /*!< LCD_T::DATA09: DD0 Position */
#define LCD_DATA09_DD0_Msk (0xfful << LCD_DATA09_DD0_Pos) /*!< LCD_T::DATA09: DD0 Mask */
#define LCD_DATA09_DD1_Pos (8) /*!< LCD_T::DATA09: DD1 Position */
#define LCD_DATA09_DD1_Msk (0xfful << LCD_DATA09_DD1_Pos) /*!< LCD_T::DATA09: DD1 Mask */
#define LCD_DATA09_DD2_Pos (16) /*!< LCD_T::DATA09: DD2 Position */
#define LCD_DATA09_DD2_Msk (0xfful << LCD_DATA09_DD2_Pos) /*!< LCD_T::DATA09: DD2 Mask */
#define LCD_DATA09_DD3_Pos (24) /*!< LCD_T::DATA09: DD3 Position */
#define LCD_DATA09_DD3_Msk (0xfful << LCD_DATA09_DD3_Pos) /*!< LCD_T::DATA09: DD3 Mask */
#define LCD_DATA10_DD0_Pos (0) /*!< LCD_T::DATA10: DD0 Position */
#define LCD_DATA10_DD0_Msk (0xfful << LCD_DATA10_DD0_Pos) /*!< LCD_T::DATA10: DD0 Mask */
#define LCD_DATA10_DD1_Pos (8) /*!< LCD_T::DATA10: DD1 Position */
#define LCD_DATA10_DD1_Msk (0xfful << LCD_DATA10_DD1_Pos) /*!< LCD_T::DATA10: DD1 Mask */
#define LCD_DATA10_DD2_Pos (16) /*!< LCD_T::DATA10: DD2 Position */
#define LCD_DATA10_DD2_Msk (0xfful << LCD_DATA10_DD2_Pos) /*!< LCD_T::DATA10: DD2 Mask */
#define LCD_DATA10_DD3_Pos (24) /*!< LCD_T::DATA10: DD3 Position */
#define LCD_DATA10_DD3_Msk (0xfful << LCD_DATA10_DD3_Pos) /*!< LCD_T::DATA10: DD3 Mask */
#define LCD_DATA11_DD0_Pos (0) /*!< LCD_T::DATA11: DD0 Position */
#define LCD_DATA11_DD0_Msk (0xfful << LCD_DATA11_DD0_Pos) /*!< LCD_T::DATA11: DD0 Mask */
#define LCD_DATA11_DD1_Pos (8) /*!< LCD_T::DATA11: DD1 Position */
#define LCD_DATA11_DD1_Msk (0xfful << LCD_DATA11_DD1_Pos) /*!< LCD_T::DATA11: DD1 Mask */
#define LCD_DATA11_DD2_Pos (16) /*!< LCD_T::DATA11: DD2 Position */
#define LCD_DATA11_DD2_Msk (0xfful << LCD_DATA11_DD2_Pos) /*!< LCD_T::DATA11: DD2 Mask */
#define LCD_DATA11_DD3_Pos (24) /*!< LCD_T::DATA11: DD3 Position */
#define LCD_DATA11_DD3_Msk (0xfful << LCD_DATA11_DD3_Pos) /*!< LCD_T::DATA11: DD3 Mask */
/** @} LCD_CONST */
/** @} end of LCD register group */
/** @} end of REGISTER group */
#endif /* __LCD_REG_H__ */
Reference in New Issue View Git Blame Copy Permalink