mirror of
https://github.com/dougg3/mac-rom-simm-programmer.git
synced 2024-12-11 07:50:36 +00:00
386 lines
28 KiB
C
386 lines
28 KiB
C
/**************************************************************************//**
|
|
* @file crypto_reg.h
|
|
* @version V1.00
|
|
* @brief CRYPTO register definition header file
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
* @copyright (C) 2019 Nuvoton Technology Corp. All rights reserved.
|
|
*****************************************************************************/
|
|
|
|
#ifndef __CRYPTO_REG_H__
|
|
#define __CRYPTO_REG_H__
|
|
|
|
#if defined ( __CC_ARM )
|
|
#pragma anon_unions
|
|
#endif
|
|
|
|
/**
|
|
@addtogroup REGISTER Control Register
|
|
@{
|
|
*/
|
|
|
|
/**
|
|
@addtogroup CRPT Cryptographic Accelerator (CRPT)
|
|
Memory Mapped Structure for Cryptographic Accelerator
|
|
@{
|
|
*/
|
|
|
|
typedef struct
|
|
{
|
|
|
|
|
|
/**
|
|
* @var CRPT_T::INTEN
|
|
* Offset: 0x00 Crypto Interrupt Enable Control Register
|
|
* ---------------------------------------------------------------------------------------------------
|
|
* |Bits |Field |Descriptions
|
|
* | :----: | :----: | :---- |
|
|
* |[0] |AESIEN |AES Interrupt Enable Bit
|
|
* | | |0 = AES interrupt Disabled.
|
|
* | | |1 = AES interrupt Enabled.
|
|
* | | |In DMA mode, an interrupt will be triggered when amount of data set in AES_DMA_CNT is fed into the AES engine.
|
|
* | | |In Non-DMA mode, an interrupt will be triggered when the AES engine finishes the operation.
|
|
* |[1] |AESEIEN |AES Error Flag Enable Bit
|
|
* | | |0 = AES error interrupt flag Disabled.
|
|
* | | |1 = AES error interrupt flag Enabled.
|
|
* @var CRPT_T::INTSTS
|
|
* Offset: 0x04 Crypto Interrupt Flag
|
|
* ---------------------------------------------------------------------------------------------------
|
|
* |Bits |Field |Descriptions
|
|
* | :----: | :----: | :---- |
|
|
* |[0] |AESIF |AES Finish Interrupt Flag
|
|
* | | |This bit is cleared by writing 1, and it has no effect by writing 0.
|
|
* | | |0 = No AES interrupt.
|
|
* | | |1 = AES encryption/decryption done interrupt.
|
|
* |[1] |AESEIF |AES Error Flag
|
|
* | | |This bit is cleared by writing 1, and it has no effect by writing 0.
|
|
* | | |0 = No AES error.
|
|
* | | |1 = AES encryption/decryption error interrupt.
|
|
* @var CRPT_T::AES_FDBCK[4]
|
|
* Offset: 0x50 ~ 0x5C AES Engine Output Feedback Data After Cryptographic Operation
|
|
* ---------------------------------------------------------------------------------------------------
|
|
* |Bits |Field |Descriptions
|
|
* | :----: | :----: | :---- |
|
|
* |[31:0] |FDBCK |AES Feedback Information
|
|
* | | |The feedback value is 128 bits in size.
|
|
* | | |The AES engine uses the data from CRPT_AES_FDBCKx as the data inputted to CRPT_AES_IVx for the next block in DMA cascade mode.
|
|
* | | |The AES engine outputs feedback information for IV in the next block's operation
|
|
* | | |Software can store that feedback value temporarily
|
|
* | | |After switching back, fill the stored feedback value to CRPT_AES_IVx in the same operation, and then continue the operation with the original setting.
|
|
* @var CRPT_T::AES_CTL
|
|
* Offset: 0x100 AES Control Register
|
|
* ---------------------------------------------------------------------------------------------------
|
|
* |Bits |Field |Descriptions
|
|
* | :----: | :----: | :---- |
|
|
* |[0] |START |AES Engine Start
|
|
* | | |0 = No effect.
|
|
* | | |1 = Start AES engine. BUSY flag will be set.
|
|
* | | |Note: This bit is always 0 when it's read back.
|
|
* |[1] |STOP |AES Engine Stop
|
|
* | | |0 = No effect.
|
|
* | | |1 = Stop AES engine.
|
|
* | | |Note: This bit is always 0 when it's read back.
|
|
* |[3:2] |KEYSZ |AES Key Size
|
|
* | | |This bit defines three different key size for AES operation.
|
|
* | | |2'b00 = 128 bits key.
|
|
* | | |2'b01 = 192 bits key.
|
|
* | | |2'b10 = 256 bits key.
|
|
* | | |2'b11 = Reserved.
|
|
* | | |If the AES accelerator is operating and the corresponding flag BUSY is 1, updating this register has no effect.
|
|
* |[5] |DMALAST |AES Last Block
|
|
* | | |In DMA mode, this bit must be set as beginning the last DMA cascade round.
|
|
* | | |In Non-DMA mode, this bit must be set when feeding in the last block of data in ECB, CBC, CTR, OFB, and CFB mode, and feeding in the (last-1) block of data at CBC-CS1, CBC-CS2, and CBC-CS3 mode.
|
|
* | | |This bit is always 0 when it's read back. Must be written again once START is triggered.
|
|
* |[6] |DMACSCAD |AES Engine DMA with Cascade Mode
|
|
* | | |0 = DMA cascade function Disabled.
|
|
* | | |1 = In DMA cascade mode, software can update DMA source address register, destination address register, and byte count register during a cascade operation, without finishing the accelerator operation.
|
|
* |[7] |DMAEN |AES Engine DMA Enable Bit
|
|
* | | |0 = AES DMA engine Disabled.
|
|
* | | |The AES engine operates in Non-DMA mode. The data need to be written in CRPT_AES_DATIN.
|
|
* | | |1 = AES_DMA engine Enabled.
|
|
* | | |The AES engine operates in DMA mode, and data movement from/to the engine is done by DMA logic.
|
|
* |[15:8] |OPMODE |AES Engine Operation Modes
|
|
* | | |0x00 = ECB (Electronic Codebook Mode) 0x01 = CBC (Cipher Block Chaining Mode).
|
|
* | | |0x02 = CFB (Cipher Feedback Mode).
|
|
* | | |0x03 = OFB (Output Feedback Mode).
|
|
* | | |0x04 = CTR (Counter Mode).
|
|
* | | |0x10 = CBC-CS1 (CBC Ciphertext-Stealing 1 Mode).
|
|
* | | |0x11 = CBC-CS2 (CBC Ciphertext-Stealing 2 Mode).
|
|
* | | |0x12 = CBC-CS3 (CBC Ciphertext-Stealing 3 Mode).
|
|
* |[16] |ENCRYPTO |AES Encryption/Decryption
|
|
* | | |0 = AES engine executes decryption operation.
|
|
* | | |1 = AES engine executes encryption operation.
|
|
* |[22] |OUTSWAP |AES Engine Output Data Swap
|
|
* | | |0 = Keep the original order.
|
|
* | | |1 = The order that CPU outputs data from the accelerator will be changed from {byte3, byte2, byte1, byte0} to {byte0, byte1, byte2, byte3}.
|
|
* |[23] |INSWAP |AES Engine Input Data Swap
|
|
* | | |0 = Keep the original order.
|
|
* | | |1 = The order that CPU feeds data to the accelerator will be changed from {byte3, byte2, byte1, byte0} to {byte0, byte1, byte2, byte3}.
|
|
* |[30:26] |KEYUNPRT |Unprotect Key
|
|
* | | |Writing 0 to CRPT_AES_CTL[31] and "10110" to CRPT_AES_CTL[30:26] is to unprotect the AES key.
|
|
* | | |The KEYUNPRT can be read and written
|
|
* | | |When it is written as the AES engine is operating, BUSY flag is 1, there would be no effect on KEYUNPRT.
|
|
* |[31] |KEYPRT |Protect Key
|
|
* | | |Read as a flag to reflect KEYPRT.
|
|
* | | |0 = No effect.
|
|
* | | |1 = Protect the content of the AES key from reading
|
|
* | | |The return value for reading CRPT_AES_KEYx is not the content of the registers CRPT_AES_KEYx
|
|
* | | |Once it is set, it can be cleared by asserting KEYUNPRT
|
|
* | | |And the key content would be cleared as well.
|
|
* @var CRPT_T::AES_STS
|
|
* Offset: 0x104 AES Engine Flag
|
|
* ---------------------------------------------------------------------------------------------------
|
|
* |Bits |Field |Descriptions
|
|
* | :----: | :----: | :---- |
|
|
* |[0] |BUSY |AES Engine Busy
|
|
* | | |0 = The AES engine is idle or finished.
|
|
* | | |1 = The AES engine is under processing.
|
|
* |[8] |INBUFEMPTY|AES Input Buffer Empty
|
|
* | | |0 = There are some data in input buffer waiting for the AES engine to process.
|
|
* | | |1 = AES input buffer is empty
|
|
* | | |Software needs to feed data to the AES engine
|
|
* | | |Otherwise, the AES engine will be pending to wait for input data.
|
|
* |[9] |INBUFFULL |AES Input Buffer Full Flag
|
|
* | | |0 = AES input buffer is not full. Software can feed the data into the AES engine.
|
|
* | | |1 = AES input buffer is full
|
|
* | | |Software cannot feed data to the AES engine
|
|
* | | |Otherwise, the flag INBUFERR will be set to 1.
|
|
* |[10] |INBUFERR |AES Input Buffer Error Flag
|
|
* | | |0 = No error.
|
|
* | | |1 = Error happens during feeding data to the AES engine.
|
|
* |[12] |CNTERR |CRPT_AES_CNT Setting Error
|
|
* | | |0 = No error in CRPT_AES_CNT setting.
|
|
* | | |1 = CRPT_AES_CNT is 0 if DMAEN (CRPT_AES_CTL[7]) is enabled.
|
|
* |[16] |OUTBUFEMPTY|AES Out Buffer Empty
|
|
* | | |0 = AES output buffer is not empty. There are some valid data kept in output buffer.
|
|
* | | |1 = AES output buffer is empty
|
|
* | | |Software cannot get data from CRPT_AES_DATOUT
|
|
* | | |Otherwise, the flag OUTBUFERR will be set to 1 since the output buffer is empty.
|
|
* |[17] |OUTBUFFULL|AES Out Buffer Full Flag
|
|
* | | |0 = AES output buffer is not full.
|
|
* | | |1 = AES output buffer is full, and software needs to get data from CRPT_AES_DATOUT
|
|
* | | |Otherwise, the AES engine will be pending since the output buffer is full.
|
|
* |[18] |OUTBUFERR |AES Out Buffer Error Flag
|
|
* | | |0 = No error.
|
|
* | | |1 = Error happens during getting the result from AES engine.
|
|
* |[20] |BUSERR |AES DMA Access Bus Error Flag
|
|
* | | |0 = No error.
|
|
* | | |1 = Bus error will stop DMA operation and AES engine.
|
|
* @var CRPT_T::AES_DATIN
|
|
* Offset: 0x108 AES Engine Data Input Port Register
|
|
* ---------------------------------------------------------------------------------------------------
|
|
* |Bits |Field |Descriptions
|
|
* | :----: | :----: | :---- |
|
|
* |[31:0] |DATIN |AES Engine Input Port
|
|
* | | |CPU feeds data to AES engine through this port by checking CRPT_AES_STS. Feed data as INBUFFULL is 0.
|
|
* @var CRPT_T::AES_DATOUT
|
|
* Offset: 0x10C AES Engine Data Output Port Register
|
|
* ---------------------------------------------------------------------------------------------------
|
|
* |Bits |Field |Descriptions
|
|
* | :----: | :----: | :---- |
|
|
* |[31:0] |DATOUT |AES Engine Output Port
|
|
* | | |CPU gets results from the AES engine through this port by checking CRPT_AES_STS
|
|
* | | |Get data as OUTBUFEMPTY is 0.
|
|
* @var CRPT_T::AES_KEY[8]
|
|
* Offset: 0x110 ~ 0x12C AES Key Word 0 ~ 7 Register
|
|
* ---------------------------------------------------------------------------------------------------
|
|
* |Bits |Field |Descriptions
|
|
* | :----: | :----: | :---- |
|
|
* |[31:0] |KEY |CRPT_AESn_KEYx
|
|
* | | |The KEY keeps the security key for AES operation.
|
|
* | | |x = 0, 1..7.
|
|
* | | |The security key for AES accelerator can be 128, 192, or 256 bits and four, six, or eight 32-bit registers are to store each security key
|
|
* | | |{CRPT_AES_KEY3, CRPT_AES_KEY2, CRPT_AES_KEY1, CRPT_AES_KEY0} stores the 128-bit security key for AES operation
|
|
* | | |{CRPT_AES_KEY5, CRPT_AES_KEY4, CRPT_AES_KEY3, CRPT_AES_KEY2, CRPT_AES_KEY1, CRPT_AES_KEY0} stores the 192-bit security key for AES operation
|
|
* | | |{CRPT_AES_KEY7, CRPT_AES_KEY6, CRPT_AES_KEY5, CRPT_AES_KEY4, CRPT_AES_KEY3, CRPT_AES_KEY2, CRPT_AES_KEY1, CRPT_AES_KEY0} stores the 256-bit security key for AES operation.
|
|
* @var CRPT_T::AES_IV[4]
|
|
* Offset: 0x130 ~ 0x13C AES Initial Vector Word 0 ~ 3 Register
|
|
* ---------------------------------------------------------------------------------------------------
|
|
* |Bits |Field |Descriptions
|
|
* | :----: | :----: | :---- |
|
|
* |[31:0] |IV |AES Initial Vectors
|
|
* | | |x = 0, 1..3.
|
|
* | | |Four initial vectors (CRPT_AES_IV0, CRPT_AES_IV1, CRPT_AES_IV2, and CRPT_AES_IV3) are for AES operating in CBC, CFB, and OFB mode
|
|
* | | |Four registers (CRPT_AES_IV0, CRPT_AES_IV1, CRPT_AES_IV2, and CRPT_AES_IV3) act as Nonce counter when the AES engine is operating in CTR mode.
|
|
* @var CRPT_T::AES_SADDR
|
|
* Offset: 0x140 AES DMA Source Address Register
|
|
* ---------------------------------------------------------------------------------------------------
|
|
* |Bits |Field |Descriptions
|
|
* | :----: | :----: | :---- |
|
|
* |[31:0] |SADDR |AES DMA Source Address
|
|
* | | |The AES accelerator supports DMA function to transfer the plain text between SRAM memory space and embedded FIFO
|
|
* | | |The SADDR keeps the source address of the data buffer where the source text is stored
|
|
* | | |Based on the source address, the AES accelerator can read the plain text (encryption) / cipher text (descryption) from SRAM memory space and do AES operation
|
|
* | | |The start of source address should be located at word boundary
|
|
* | | |In other words, bit 1 and 0 of SADDR are ignored.
|
|
* | | |SADDR can be read and written
|
|
* | | |Writing to SADDR while the AES accelerator is operating doesn't affect the current AES operation
|
|
* | | |But the value of SADDR will be updated later on
|
|
* | | |Consequently, software can prepare the DMA source address for the next AES operation.
|
|
* | | |In DMA mode, software can update the next CRPT_AES_SADDR before triggering START.
|
|
* | | |The value of CRPT_AES_SADDR and CRPT_AES_DADDR can be the same.
|
|
* @var CRPT_T::AES_DADDR
|
|
* Offset: 0x144 AES DMA Destination Address Register
|
|
* ---------------------------------------------------------------------------------------------------
|
|
* |Bits |Field |Descriptions
|
|
* | :----: | :----: | :---- |
|
|
* |[31:0] |DADDR |AES DMA Destination Address
|
|
* | | |The AES accelerator supports DMA function to transfer the cipher text between SRAM memory space and embedded FIFO
|
|
* | | |The DADDR keeps the destination address of the data buffer where the engine output's text will be stored
|
|
* | | |Based on the destination address, the AES accelerator can write the cipher text (encryption) / plain text (decryption) back to SRAM memory space after the AES operation is finished
|
|
* | | |The start of destination address should be located at word boundary
|
|
* | | |In other words, bit 1 and 0 of DADDR are ignored.
|
|
* | | |DADDR can be read and written
|
|
* | | |Writing to DADDR while the AES accelerator is operating doesn't affect the current AES operation
|
|
* | | |But the value of DADDR will be updated later on
|
|
* | | |Consequently, software can prepare the destination address for the next AES operation.
|
|
* | | |In DMA mode, software can update the next CRPT_AES_DADDR before triggering START.
|
|
* | | |The value of CRPT_AES_SADDR and CRPT_AES_DADDR can be the same.
|
|
* @var CRPT_T::AES_CNT
|
|
* Offset: 0x148 AES Byte Count Register
|
|
* ---------------------------------------------------------------------------------------------------
|
|
* |Bits |Field |Descriptions
|
|
* | :----: | :----: | :---- |
|
|
* |[31:0] |CNT |AES Byte Count
|
|
* | | |The CRPT_AES_CNT keeps the byte count of source text that is for the AES engine operating in DMA mode
|
|
* | | |The CRPT_AES_CNT is 32-bit and the maximum of byte count is 4G bytes.
|
|
* | | |CRPT_AESn_CNT can be read and written
|
|
* | | |Writing to CRPT_AES_CNT while the AES accelerator is operating doesn't affect the current AES operation
|
|
* | | |But the value of CRPT_AESn_CNT will be updated later on
|
|
* | | |Consequently, software can prepare the byte count of data for the next AES operation.
|
|
* | | |According to CBC-CS1, CBC-CS2, and CBC-CS3 standard, the count of operation data must be more than 16 bytes
|
|
* | | |Operations that are qual or less than one block will output unexpected result.
|
|
* | | |In Non-DMA ECB, CBC, CFB, OFB, and CTR mode, CRPT_AES_CNT must be set as byte count for the last block of data before feeding in the last block of data
|
|
* | | |In Non-DMA CBC-CS1, CBC-CS2, and CBC-CS3 mode, CRPT_AES_CNT must be set as byte count for the last two blocks of data before feeding in the last two blocks of data.
|
|
*/
|
|
__IO uint32_t INTEN; /*!< [0x0000] Crypto Interrupt Enable Control Register */
|
|
__IO uint32_t INTSTS; /*!< [0x0004] Crypto Interrupt Flag */
|
|
__I uint32_t RESERVE0[18];
|
|
__I uint32_t AES_FDBCK[4]; /*!< [0x0050 ~ 0x005c] AES Engine Output Feedback Data After Cryptographic Operation*/
|
|
__I uint32_t RESERVE1[40];
|
|
__IO uint32_t AES_CTL; /*!< [0x0100] AES Control Register */
|
|
__I uint32_t AES_STS; /*!< [0x0104] AES Engine Flag */
|
|
__IO uint32_t AES_DATIN; /*!< [0x0108] AES Engine Data Input Port Register */
|
|
__I uint32_t AES_DATOUT; /*!< [0x010c] AES Engine Data Output Port Register */
|
|
__IO uint32_t AES_KEY[8]; /*!< [0x0110 ~ 0x012c] AES Key Word 0 ~ 7 Register */
|
|
__IO uint32_t AES_IV[4]; /*!< [0x0130 ~ 0x013c] AES Initial Vector Word 0 ~3 Register */
|
|
__IO uint32_t AES_SADDR; /*!< [0x0140] AES DMA Source Address Register */
|
|
__IO uint32_t AES_DADDR; /*!< [0x0144] AES DMA Destination Address Register */
|
|
__IO uint32_t AES_CNT; /*!< [0x0148] AES Byte Count Register */
|
|
|
|
} CRPT_T;
|
|
|
|
/**
|
|
@addtogroup CRPT_CONST CRYPTO Bit Field Definition
|
|
Constant Definitions for CRYPTO Controller
|
|
@{ */
|
|
|
|
#define CRPT_INTEN_AESIEN_Pos (0) /*!< CRPT_T::INTEN: AESIEN Position */
|
|
#define CRPT_INTEN_AESIEN_Msk (0x1ul << CRPT_INTEN_AESIEN_Pos) /*!< CRPT_T::INTEN: AESIEN Mask */
|
|
|
|
#define CRPT_INTEN_AESEIEN_Pos (1) /*!< CRPT_T::INTEN: AESEIEN Position */
|
|
#define CRPT_INTEN_AESEIEN_Msk (0x1ul << CRPT_INTEN_AESEIEN_Pos) /*!< CRPT_T::INTEN: AESEIEN Mask */
|
|
|
|
#define CRPT_INTSTS_AESIF_Pos (0) /*!< CRPT_T::INTSTS: AESIF Position */
|
|
#define CRPT_INTSTS_AESIF_Msk (0x1ul << CRPT_INTSTS_AESIF_Pos) /*!< CRPT_T::INTSTS: AESIF Mask */
|
|
|
|
#define CRPT_INTSTS_AESEIF_Pos (1) /*!< CRPT_T::INTSTS: AESEIF Position */
|
|
#define CRPT_INTSTS_AESEIF_Msk (0x1ul << CRPT_INTSTS_AESEIF_Pos) /*!< CRPT_T::INTSTS: AESEIF Mask */
|
|
|
|
#define CRPT_AES_FDBCKx_FDBCK_Pos (0) /*!< CRPT_T::AES_FDBCK[4]: FDBCK Position */
|
|
#define CRPT_AES_FDBCKx_FDBCK_Msk (0xfffffffful << CRPT_AES_FDBCKx_FDBCK_Pos) /*!< CRPT_T::AES_FDBCK[4]: FDBCK Mask */
|
|
|
|
#define CRPT_AES_CTL_START_Pos (0) /*!< CRPT_T::AES_CTL: START Position */
|
|
#define CRPT_AES_CTL_START_Msk (0x1ul << CRPT_AES_CTL_START_Pos) /*!< CRPT_T::AES_CTL: START Mask */
|
|
|
|
#define CRPT_AES_CTL_STOP_Pos (1) /*!< CRPT_T::AES_CTL: STOP Position */
|
|
#define CRPT_AES_CTL_STOP_Msk (0x1ul << CRPT_AES_CTL_STOP_Pos) /*!< CRPT_T::AES_CTL: STOP Mask */
|
|
|
|
#define CRPT_AES_CTL_KEYSZ_Pos (2) /*!< CRPT_T::AES_CTL: KEYSZ Position */
|
|
#define CRPT_AES_CTL_KEYSZ_Msk (0x3ul << CRPT_AES_CTL_KEYSZ_Pos) /*!< CRPT_T::AES_CTL: KEYSZ Mask */
|
|
|
|
#define CRPT_AES_CTL_DMALAST_Pos (5) /*!< CRPT_T::AES_CTL: DMALAST Position */
|
|
#define CRPT_AES_CTL_DMALAST_Msk (0x1ul << CRPT_AES_CTL_DMALAST_Pos) /*!< CRPT_T::AES_CTL: DMALAST Mask */
|
|
|
|
#define CRPT_AES_CTL_DMACSCAD_Pos (6) /*!< CRPT_T::AES_CTL: DMACSCAD Position */
|
|
#define CRPT_AES_CTL_DMACSCAD_Msk (0x1ul << CRPT_AES_CTL_DMACSCAD_Pos) /*!< CRPT_T::AES_CTL: DMACSCAD Mask */
|
|
|
|
#define CRPT_AES_CTL_DMAEN_Pos (7) /*!< CRPT_T::AES_CTL: DMAEN Position */
|
|
#define CRPT_AES_CTL_DMAEN_Msk (0x1ul << CRPT_AES_CTL_DMAEN_Pos) /*!< CRPT_T::AES_CTL: DMAEN Mask */
|
|
|
|
#define CRPT_AES_CTL_OPMODE_Pos (8) /*!< CRPT_T::AES_CTL: OPMODE Position */
|
|
#define CRPT_AES_CTL_OPMODE_Msk (0xfful << CRPT_AES_CTL_OPMODE_Pos) /*!< CRPT_T::AES_CTL: OPMODE Mask */
|
|
|
|
#define CRPT_AES_CTL_ENCRYPTO_Pos (16) /*!< CRPT_T::AES_CTL: ENCRYPTO Position */
|
|
#define CRPT_AES_CTL_ENCRYPTO_Msk (0x1ul << CRPT_AES_CTL_ENCRYPTO_Pos) /*!< CRPT_T::AES_CTL: ENCRYPTO Mask */
|
|
|
|
#define CRPT_AES_CTL_OUTSWAP_Pos (22) /*!< CRPT_T::AES_CTL: OUTSWAP Position */
|
|
#define CRPT_AES_CTL_OUTSWAP_Msk (0x1ul << CRPT_AES_CTL_OUTSWAP_Pos) /*!< CRPT_T::AES_CTL: OUTSWAP Mask */
|
|
|
|
#define CRPT_AES_CTL_INSWAP_Pos (23) /*!< CRPT_T::AES_CTL: INSWAP Position */
|
|
#define CRPT_AES_CTL_INSWAP_Msk (0x1ul << CRPT_AES_CTL_INSWAP_Pos) /*!< CRPT_T::AES_CTL: INSWAP Mask */
|
|
|
|
#define CRPT_AES_CTL_KEYUNPRT_Pos (26) /*!< CRPT_T::AES_CTL: KEYUNPRT Position */
|
|
#define CRPT_AES_CTL_KEYUNPRT_Msk (0x1ful << CRPT_AES_CTL_KEYUNPRT_Pos) /*!< CRPT_T::AES_CTL: KEYUNPRT Mask */
|
|
|
|
#define CRPT_AES_CTL_KEYPRT_Pos (31) /*!< CRPT_T::AES_CTL: KEYPRT Position */
|
|
#define CRPT_AES_CTL_KEYPRT_Msk (0x1ul << CRPT_AES_CTL_KEYPRT_Pos) /*!< CRPT_T::AES_CTL: KEYPRT Mask */
|
|
|
|
#define CRPT_AES_STS_BUSY_Pos (0) /*!< CRPT_T::AES_STS: BUSY Position */
|
|
#define CRPT_AES_STS_BUSY_Msk (0x1ul << CRPT_AES_STS_BUSY_Pos) /*!< CRPT_T::AES_STS: BUSY Mask */
|
|
|
|
#define CRPT_AES_STS_INBUFEMPTY_Pos (8) /*!< CRPT_T::AES_STS: INBUFEMPTY Position */
|
|
#define CRPT_AES_STS_INBUFEMPTY_Msk (0x1ul << CRPT_AES_STS_INBUFEMPTY_Pos) /*!< CRPT_T::AES_STS: INBUFEMPTY Mask */
|
|
|
|
#define CRPT_AES_STS_INBUFFULL_Pos (9) /*!< CRPT_T::AES_STS: INBUFFULL Position */
|
|
#define CRPT_AES_STS_INBUFFULL_Msk (0x1ul << CRPT_AES_STS_INBUFFULL_Pos) /*!< CRPT_T::AES_STS: INBUFFULL Mask */
|
|
|
|
#define CRPT_AES_STS_INBUFERR_Pos (10) /*!< CRPT_T::AES_STS: INBUFERR Position */
|
|
#define CRPT_AES_STS_INBUFERR_Msk (0x1ul << CRPT_AES_STS_INBUFERR_Pos) /*!< CRPT_T::AES_STS: INBUFERR Mask */
|
|
|
|
#define CRPT_AES_STS_CNTERR_Pos (12) /*!< CRPT_T::AES_STS: CNTERR Position */
|
|
#define CRPT_AES_STS_CNTERR_Msk (0x1ul << CRPT_AES_STS_CNTERR_Pos) /*!< CRPT_T::AES_STS: CNTERR Mask */
|
|
|
|
#define CRPT_AES_STS_OUTBUFEMPTY_Pos (16) /*!< CRPT_T::AES_STS: OUTBUFEMPTY Position*/
|
|
#define CRPT_AES_STS_OUTBUFEMPTY_Msk (0x1ul << CRPT_AES_STS_OUTBUFEMPTY_Pos) /*!< CRPT_T::AES_STS: OUTBUFEMPTY Mask */
|
|
|
|
#define CRPT_AES_STS_OUTBUFFULL_Pos (17) /*!< CRPT_T::AES_STS: OUTBUFFULL Position */
|
|
#define CRPT_AES_STS_OUTBUFFULL_Msk (0x1ul << CRPT_AES_STS_OUTBUFFULL_Pos) /*!< CRPT_T::AES_STS: OUTBUFFULL Mask */
|
|
|
|
#define CRPT_AES_STS_OUTBUFERR_Pos (18) /*!< CRPT_T::AES_STS: OUTBUFERR Position */
|
|
#define CRPT_AES_STS_OUTBUFERR_Msk (0x1ul << CRPT_AES_STS_OUTBUFERR_Pos) /*!< CRPT_T::AES_STS: OUTBUFERR Mask */
|
|
|
|
#define CRPT_AES_STS_BUSERR_Pos (20) /*!< CRPT_T::AES_STS: BUSERR Position */
|
|
#define CRPT_AES_STS_BUSERR_Msk (0x1ul << CRPT_AES_STS_BUSERR_Pos) /*!< CRPT_T::AES_STS: BUSERR Mask */
|
|
|
|
#define CRPT_AES_DATIN_DATIN_Pos (0) /*!< CRPT_T::AES_DATIN: DATIN Position */
|
|
#define CRPT_AES_DATIN_DATIN_Msk (0xfffffffful << CRPT_AES_DATIN_DATIN_Pos) /*!< CRPT_T::AES_DATIN: DATIN Mask */
|
|
|
|
#define CRPT_AES_DATOUT_DATOUT_Pos (0) /*!< CRPT_T::AES_DATOUT: DATOUT Position */
|
|
#define CRPT_AES_DATOUT_DATOUT_Msk (0xfffffffful << CRPT_AES_DATOUT_DATOUT_Pos) /*!< CRPT_T::AES_DATOUT: DATOUT Mask */
|
|
|
|
#define CRPT_AES_KEYx_KEY_Pos (0) /*!< CRPT_T::AES_KEY[8]: KEY Position */
|
|
#define CRPT_AES_KEYx_KEY_Msk (0xfffffffful << CRPT_AES_KEYx_KEY_Pos) /*!< CRPT_T::AES_KEY[8]: KEY Mask */
|
|
|
|
#define CRPT_AES_IVx_IV_Pos (0) /*!< CRPT_T::AES_IV[4]: IV Position */
|
|
#define CRPT_AES_IVx_IV_Msk (0xfffffffful << CRPT_AES_IVx_IV_Pos) /*!< CRPT_T::AES_IV[4]: IV Mask */
|
|
|
|
#define CRPT_AES_SADDR_SADDR_Pos (0) /*!< CRPT_T::AES_SADDR: SADDR Position */
|
|
#define CRPT_AES_SADDR_SADDR_Msk (0xfffffffful << CRPT_AES_SADDR_SADDR_Pos) /*!< CRPT_T::AES_SADDR: SADDR Mask */
|
|
|
|
#define CRPT_AES_DADDR_DADDR_Pos (0) /*!< CRPT_T::AES_DADDR: DADDR Position */
|
|
#define CRPT_AES_DADDR_DADDR_Msk (0xfffffffful << CRPT_AES_DADDR_DADDR_Pos) /*!< CRPT_T::AES_DADDR: DADDR Mask */
|
|
|
|
#define CRPT_AES_CNT_CNT_Pos (0) /*!< CRPT_T::AES_CNT: CNT Position */
|
|
#define CRPT_AES_CNT_CNT_Msk (0xfffffffful << CRPT_AES_CNT_CNT_Pos) /*!< CRPT_T::AES_CNT: CNT Mask */
|
|
|
|
/** @} CRPT_CONST CRYPTO */
|
|
/** @} end of CRYPTO register group */
|
|
/** @} end of REGISTER group */
|
|
|
|
#if defined ( __CC_ARM )
|
|
#pragma no_anon_unions
|
|
#endif
|
|
|
|
#endif /* __CRYPTO_REG_H__ */
|