Macintosh-SW/mac-rom-simm-programmer
1
0
Fork 0
mirror of https://github.com/dougg3/mac-rom-simm-programmer.git synced 2024-12-12 14:31:15 +00:00
Code Issues Projects Releases Wiki Activity
71164460f3
mac-rom-simm-programmer/hal/m258ke/nuvoton/M251.h
Doug Brown 3a7e3bf69f Don't include peripheral header files in M251.h 
I don't want to include all of Nuvoton's peripheral drivers, but I do
want to use this header file. Remove the unnecessary peripheral
includes.
2023-06-25 11:41:19 -07:00

613 lines
30 KiB
C
Raw Blame History

/**************************************************************************//**
* @file M251.h
* @version V1.0
* @brief Peripheral Access Layer Header File
*
* SPDX-License-Identifier: Apache-2.0
* @copyright (C) 2019 Nuvoton Technology Corp. All rights reserved.
******************************************************************************/
/**
\mainpage NuMicro M251/M252/M254/M256/M258 Series CMSIS BSP Driver Reference
*
* <b>Introduction</b>
*
* This user manual describes the usage of M251/M252/M254/M256/M258 Series MCU device driver
*
* <b>Disclaimer</b>
*
* The Software is furnished "AS IS", without warranty as to performance or results, and
* the entire risk as to performance or results is assumed by YOU. Nuvoton disclaims all
* warranties, express, implied or otherwise, with regard to the Software, its use, or
* operation, including without limitation any and all warranties of merchantability, fitness
* for a particular purpose, and non-infringement of intellectual property rights.
*
* <b>Important Notice</b>
*
* Nuvoton Products are neither intended nor warranted for usage in systems or equipment,
* any malfunction or failure of which may cause loss of human life, bodily injury or severe
* property damage. Such applications are deemed, "Insecure Usage".
*
* Insecure usage includes, but is not limited to: equipment for surgical implementation,
* atomic energy control instruments, airplane or spaceship instruments, the control or
* operation of dynamic, brake or safety systems designed for vehicular use, traffic signal
* instruments, all types of safety devices, and other applications intended to support or
* sustain life.
*
* All Insecure Usage shall be made at customer's risk, and in the event that third parties
* lay claims to Nuvoton as a result of customer's Insecure Usage, customer shall indemnify
* the damages and liabilities thus incurred by Nuvoton.
*
* Please note that all data and specifications are subject to change without notice. All the
* trademarks of products and companies mentioned in this datasheet belong to their respective
* owners.
*
* <b>Copyright Notice</b>
*
* SPDX-License-Identifier: Apache-2.0
* @copyright (C) 2019 Nuvoton Technology Corp. All rights reserved.
*/
#ifndef __M251_H__
#define __M251_H__
#ifdef __cplusplus
extern "C" {
#endif
/******************************************************************************/
/* Processor and Core Peripherals */
/******************************************************************************/
/** @addtogroup CMSIS_Device CMSIS Definitions
Configuration of the Cortex-M23 Processor and Core Peripherals
@{
*/
/*
* ==========================================================================
* ---------- Interrupt Number Definition -----------------------------------
* ==========================================================================
*/
/**
* @details Interrupt Number Definition.
*/
typedef enum IRQn
{
/****** Cortex-M0 Processor Exceptions Numbers ***********************************************/
NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
SVCall_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
/****** ARMIKMCU Swift specific Interrupt Numbers ********************************************/
BOD_IRQn = 0, /*!< Brown-Out Low Voltage Detected Interrupt */
IRCTRIM_IRQn = 1, /*!< Watch Dog Timer Interrupt */
PWRWU_IRQn = 2, /*!< EINT0, EINT2 and EINT4 Interrupt */
RESERVE0 = 3, /*!< Reserve 0 */
CLKFAIL_IRQn = 4, /*!< Clock fail detected Interrupt */
RESERVE1 = 5, /*!< Reserve 1 */
RTC_IRQn = 6, /*!< Real Time Clock Interrupt */
TAMPER_IRQn = 7, /*!< Tamper detection Interrupt */
WDT_IRQn = 8, /*!< Watch Dog Timer Interrupt */
WWDT_IRQn = 9, /*!< Window Watch Dog Timer Interrupt */
EINT0_IRQn = 10, /*!< External Input 0 Interrupt */
EINT1_IRQn = 11, /*!< External Input 1 Interrupt */
EINT2_IRQn = 12, /*!< External Input 2 Interrupt */
EINT3_IRQn = 13, /*!< External Input 3 Interrupt */
EINT4_IRQn = 14, /*!< External Input 4 Interrupt */
EINT5_IRQn = 15, /*!< External Input 5 Interrupt */
GPA_IRQn = 16, /*!< GPIO PORT A Interrupt */
GPB_IRQn = 17, /*!< GPIO PORT B Interrupt */
GPC_IRQn = 18, /*!< GPIO PORT C Interrupt */
GPD_IRQn = 19, /*!< GPIO PORT D Interrupt */
GPE_IRQn = 20, /*!< GPIO PORT E Interrupt */
GPF_IRQn = 21, /*!< GPIO PORT F Interrupt */
QSPI0_IRQn = 22, /*!< QSPI0 Interrupt */
SPI0_IRQn = 23, /*!< SPI0 Interrupt */
BRAKE0_IRQn = 24, /*!< PWM Brake0 Interrupt */
PWM0_P0_IRQn = 25, /*!< PWM0 P0 Interrupt */
PWM0_P1_IRQn = 26, /*!< PWM0 P1 Interrupt */
PWM0_P2_IRQn = 27, /*!< PWM0 P2 Interrupt */
BRAKE1_IRQn = 28, /*!< PWM Brake1 Interrupt */
PWM1_P0_IRQn = 29, /*!< PWM1 P0 Interrupt */
PWM1_P1_IRQn = 30, /*!< PWM1 P1 Interrupt */
PWM1_P2_IRQn = 31, /*!< PWM1 P2 Interrupt */
TMR0_IRQn = 32, /*!< TIMER0 Interrupt */
TMR1_IRQn = 33, /*!< TIMER1 Interrupt */
TMR2_IRQn = 34, /*!< TIMER2 Interrupt */
TMR3_IRQn = 35, /*!< TIMER3 Interrupt */
UART0_IRQn = 36, /*!< UART0 Interrupt */
UART1_IRQn = 37, /*!< UART1 Interrupt */
I2C0_IRQn = 38, /*!< I2C0 Interrupt */
I2C1_IRQn = 39, /*!< I2C1 Interrupt */
PDMA_IRQn = 40, /*!< Peripheral DMA Interrupt */
DAC_IRQn = 41, /*!< DAC Interrupt */
EADC_INT0_IRQn = 42, /*!< Enhance ADC Interrupt 0 */
EADC_INT1_IRQn = 43, /*!< Enhance ADC Interrupt 1 */
ACMP01_IRQn = 44, /*!< ACMP0 Interrupt */
BPWM0_IRQn = 45, /*!< BPWM0 Interrupt */
EADC_INT2_IRQn = 46, /*!< Enhance EADC Interrupt 2 */
EADC_INT3_IRQn = 47, /*!< Enhance EADC Interrupt 3 */
UART2_IRQn = 48, /*!< UART2 Interrupt */
UART3_IRQn = 49, /*!< UART3 Interrupt */
USCI0_IRQn = 50, /*!< USCI0 Interrupt */
SPI1_IRQn = 51, /*!< SPI0 Interrupt */
USCI1_IRQn = 52, /*!< USCI1 Interrupt */
USBD_IRQn = 53, /*!< USB Device Interrupt */
BPWM1_IRQn = 54, /*!< BPWM1 Interrupt */
PSIO_IRQn = 55, /*!< PSIO Interrupt */
RESERVE4 = 56, /*!< Reserve 4 */
CRPT_IRQn = 57, /*!< Crypto interrupt */
SC0_IRQn = 58, /*!< Smart Card0 Interrupt */
RESERVE5 = 59, /*!< Reserve 5 */
USCI2_IRQn = 60, /*!< USCI2 Interrupt */
LCD_IRQn = 61, /*!< LCD Interrupt */
OPA_IRQn = 62, /*!< OPA Interrupt */
TK_IRQn = 63, /*!< Touch Key Interrupt */
} IRQn_Type;
/* ================================================================================ */
/* ================ Processor and Core Peripheral Section ================ */
/* ================================================================================ */
/* ------- Start of section using anonymous unions and disabling warnings ------- */
#if defined (__CC_ARM)
#pragma push
#pragma anon_unions
#elif defined (__ICCARM__)
#pragma language=extended
#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
#pragma clang diagnostic push
#pragma clang diagnostic ignored "-Wc11-extensions"
#pragma clang diagnostic ignored "-Wreserved-id-macro"
#elif defined (__GNUC__)
/* anonymous unions are enabled by default */
#elif defined (__TMS470__)
/* anonymous unions are enabled by default */
#elif defined (__TASKING__)
#pragma warning 586
#elif defined (__CSMC__)
/* anonymous unions are enabled by default */
#else
#warning Not supported compiler type
#endif
/* -------- Configuration of the Cortex-ARMv8MBL Processor and Core Peripherals ------- */
#define __ARMv8MBL_REV 0x0000U /* Core revision r0p0 */
#define __SAU_PRESENT 0U /* SAU present */
#define __MPU_PRESENT 1U /* MPU present */
#define __VTOR_PRESENT 1U /* VTOR present */
#define __NVIC_PRIO_BITS 2U /* Number of Bits used for Priority Levels */
#define __Vendor_SysTickConfig 0U /* Set to 1 if different SysTick Config is used */
#define USE_ASSERT 0U /* Define to use Assert function or not */
/** @} end of group CMSIS_Device */
#include <stdint.h>
#include "core_cm23.h" /* Processor and core peripherals */
#include "system_M251.h" /* System Header */
/******************************************************************************/
/* Device Specific Peripheral registers structures */
/******************************************************************************/
/** @addtogroup REGISTER Control Register
@{
*/
#include "acmp_reg.h"
#include "bpwm_reg.h"
#include "clk_reg.h"
#include "crc_reg.h"
#include "crypto_reg.h"
#include "dac_reg.h"
#include "eadc_reg.h"
#include "ebi_reg.h"
#include "fmc_reg.h"
#include "gpio_reg.h"
#include "i2c_reg.h"
#include "opa_reg.h"
#include "pdma_reg.h"
#include "psio_reg.h"
#include "pwm_reg.h"
#include "rtc_reg.h"
#include "sc_reg.h"
#include "qspi_reg.h"
#include "spi_reg.h"
#include "sys_reg.h"
#include "timer_reg.h"
#include "uart_reg.h"
#include "uuart_reg.h"
#include "ui2c_reg.h"
#include "uspi_reg.h"
#include "usbd_reg.h"
#include "wdt_reg.h"
#include "wwdt_reg.h"
#include "lcd_reg.h"
#include "tk_reg.h"
/** @} end of REGISTER group */
/******************************************************************************/
/* Peripheral memory map */
/******************************************************************************/
/** @addtogroup PERIPHERAL_BASE Peripheral Memory Base
Memory Mapped Structure for Series Peripheral
@{
*/
/* Peripheral and SRAM base address */
#define FLASH_BASE ((uint32_t)0x00000000UL) /*!< Flash Base Address */
#define SRAM_BASE ((uint32_t)0x20000000UL) /*!< SRAM Base Address */
#define PERIPH_BASE ((uint32_t)0x40000000UL) /*!< Peripheral Base Address */
/* Peripheral memory map */
#define AHBPERIPH_BASE PERIPH_BASE /*!< AHB Base Address */
#define APBPERIPH_BASE (PERIPH_BASE + 0x00040000UL) /*!< APB Base Address */
/*!< AHB peripherals */
#define SYS_BASE (AHBPERIPH_BASE + 0x00000UL)
#define CLK_BASE (AHBPERIPH_BASE + 0x00200UL)
#define NMI_BASE (AHBPERIPH_BASE + 0x00300UL)
#define GPIO_BASE (AHBPERIPH_BASE + 0x04000UL)
#define GPIOA_BASE (AHBPERIPH_BASE + 0x04000UL)
#define GPIOB_BASE (AHBPERIPH_BASE + 0x04040UL)
#define GPIOC_BASE (AHBPERIPH_BASE + 0x04080UL)
#define GPIOD_BASE (AHBPERIPH_BASE + 0x040C0UL)
#define GPIOE_BASE (AHBPERIPH_BASE + 0x04100UL)
#define GPIOF_BASE (AHBPERIPH_BASE + 0x04140UL)
#define GPIO_DBCTL_BASE (AHBPERIPH_BASE + 0x04440UL)
#define GPIO_PIN_DATA_BASE (AHBPERIPH_BASE + 0x04800UL)
#define PDMA_BASE (AHBPERIPH_BASE + 0x08000UL)
#define FMC_BASE (AHBPERIPH_BASE + 0x0C000UL)
#define EBI_BASE (AHBPERIPH_BASE + 0x10000UL)
#define CRC_BASE (AHBPERIPH_BASE + 0x31000UL)
#define CRPT_BASE (AHBPERIPH_BASE + 0x32000UL)
/*!< APB0 peripherals */
#define WDT_BASE (APBPERIPH_BASE + 0x00000UL)
#define WWDT_BASE (APBPERIPH_BASE + 0x00100UL)
#define OPA_BASE (APBPERIPH_BASE + 0x06000UL)
#define TIMER01_BASE (APBPERIPH_BASE + 0x10000UL)
#define PWM0_BASE (APBPERIPH_BASE + 0x18000UL)
#define BPWM0_BASE (APBPERIPH_BASE + 0x1A000UL)
#define QSPI0_BASE (APBPERIPH_BASE + 0x20000UL)
#define SPI1_BASE (APBPERIPH_BASE + 0x22000UL)
#define UART0_BASE (APBPERIPH_BASE + 0x30000UL)
#define UART2_BASE (APBPERIPH_BASE + 0x32000UL)
#define I2C0_BASE (APBPERIPH_BASE + 0x40000UL)
#define SC0_BASE (APBPERIPH_BASE + 0x50000UL)
#define USBD_BASE (APBPERIPH_BASE + 0x80000UL)
#define USCI0_BASE (APBPERIPH_BASE + 0x90000UL)
#define USCI2_BASE (APBPERIPH_BASE + 0x92000UL)
#define TK_BASE (APBPERIPH_BASE + 0x82000UL)
/*!< APB1 peripherals */
#define RTC_BASE (APBPERIPH_BASE + 0x01000UL)
#define EADC_BASE (APBPERIPH_BASE + 0x03000UL)
#define ACMP01_BASE (APBPERIPH_BASE + 0x05000UL)
#define DAC_BASE (APBPERIPH_BASE + 0x07000UL)
#define TIMER23_BASE (APBPERIPH_BASE + 0x11000UL)
#define PWM1_BASE (APBPERIPH_BASE + 0x19000UL)
#define BPWM1_BASE (APBPERIPH_BASE + 0x1B000UL)
#define SPI0_BASE (APBPERIPH_BASE + 0x21000UL)
#define UART1_BASE (APBPERIPH_BASE + 0x31000UL)
#define UART3_BASE (APBPERIPH_BASE + 0x33000UL)
#define I2C1_BASE (APBPERIPH_BASE + 0x41000UL)
#define PSIO_BASE (APBPERIPH_BASE + 0x83000UL)
#define USCI1_BASE (APBPERIPH_BASE + 0x91000UL)
#define LCD_BASE (APBPERIPH_BASE + 0x7B000UL)
/** @} end of group PERIPHERAL_BASE */
/******************************************************************************/
/* Peripheral declaration */
/******************************************************************************/
/** @addtogroup PERIPHERAL_DECLARATION Peripheral Pointer
The Declaration of Peripheral Pointer
@{
*/
/*!< AHB peripherals */
#define SYS ((SYS_T *) SYS_BASE)
#define CLK ((CLK_T *) CLK_BASE)
#define PA ((GPIO_T *) GPIOA_BASE)
#define PB ((GPIO_T *) GPIOB_BASE)
#define PC ((GPIO_T *) GPIOC_BASE)
#define PD ((GPIO_T *) GPIOD_BASE)
#define PE ((GPIO_T *) GPIOE_BASE)
#define PF ((GPIO_T *) GPIOF_BASE)
#define GPIO ((GPIO_DBCTL_T *) GPIO_DBCTL_BASE)
#define PDMA ((PDMA_T *) PDMA_BASE)
#define FMC ((FMC_T *) FMC_BASE)
#define EBI ((EBI_T *) EBI_BASE)
#define CRC ((CRC_T *) CRC_BASE)
#define CRPT ((CRPT_T *) CRPT_BASE)
/*!< APB0 peripherals */
#define WDT ((WDT_T *) WDT_BASE)
#define WWDT ((WWDT_T *) WWDT_BASE)
#define OPA ((OPA_T *) OPA_BASE)
#define TIMER0 ((TIMER_T *) TIMER01_BASE)
#define TIMER1 ((TIMER_T *) (TIMER01_BASE + 0x100UL))
#define PWM0 ((PWM_T *) PWM0_BASE)
#define BPWM0 ((BPWM_T *) BPWM0_BASE)
#define QSPI0 ((QSPI_T *) QSPI0_BASE)
#define SPI1 ((SPI_T *) SPI1_BASE)
#define UART0 ((UART_T *) UART0_BASE)
#define UART2 ((UART_T *) UART2_BASE)
#define I2C0 ((I2C_T *) I2C0_BASE)
#define SC0 ((SC_T *) SC0_BASE)
#define USBD ((USBD_T *) USBD_BASE)
#define UI2C0 ((UI2C_T *) USCI0_BASE)
#define USPI0 ((USPI_T *) USCI0_BASE)
#define UUART0 ((UUART_T *) USCI0_BASE)
#define UI2C2 ((UI2C_T *) USCI2_BASE)
#define USPI2 ((USPI_T *) USCI2_BASE)
#define UUART2 ((UUART_T *) USCI2_BASE)
#define TK ((TK_T *) TK_BASE)
/*!< APB1 peripherals */
#define RTC ((RTC_T *) RTC_BASE)
#define EADC ((EADC_T *) EADC_BASE)
#define ACMP01 ((ACMP_T *) ACMP01_BASE)
#define DAC0 ((DAC_T *) DAC_BASE)
#define DAC1 ((DAC_T *) (DAC_BASE+0x40UL))
#define TIMER2 ((TIMER_T *) TIMER23_BASE)
#define TIMER3 ((TIMER_T *) (TIMER23_BASE+ 0x100UL))
#define PWM1 ((PWM_T *) PWM1_BASE)
#define BPWM1 ((BPWM_T *) BPWM1_BASE)
#define SPI0 ((SPI_T *) SPI0_BASE)
#define UART1 ((UART_T *) UART1_BASE)
#define UART3 ((UART_T *) UART3_BASE)
#define I2C1 ((I2C_T *) I2C1_BASE)
#define PSIO ((PSIO_T *) PSIO_BASE)
#define UI2C1 ((UI2C_T *) USCI1_BASE)
#define USPI1 ((USPI_T *) USCI1_BASE)
#define UUART1 ((UUART_T *) USCI1_BASE)
#define LCD ((LCD_T *) LCD_BASE)
/** @} end of group PERIPHERAL_DECLARATION */
/* -------------------- End of section using anonymous unions ------------------- */
#if defined (__CC_ARM)
#pragma pop
#elif defined (__ICCARM__)
/* leave anonymous unions enabled */
#elif (__ARMCC_VERSION >= 6010050)
#pragma clang diagnostic pop
#elif defined (__GNUC__)
/* anonymous unions are enabled by default */
#elif defined (__TMS470__)
/* anonymous unions are enabled by default */
#elif defined (__TASKING__)
#pragma warning restore
#elif defined (__CSMC__)
/* anonymous unions are enabled by default */
#else
#warning Not supported compiler type
#endif
#ifdef __cplusplus
}
#endif
/*=============================================================================*/
/** @addtogroup IO_ROUTINE I/O Routines
The Declaration of I/O Routines
@{
*/
typedef volatile uint8_t vu8; ///< Define 8-bit unsigned volatile data type
typedef volatile uint16_t vu16; ///< Define 16-bit unsigned volatile data type
typedef volatile uint32_t vu32; ///< Define 32-bit unsigned volatile data type
typedef volatile uint64_t vu64; ///< Define 64-bit unsigned volatile data type
/**
* @brief Get a 8-bit unsigned value from specified address
* @param[in] addr Address to get 8-bit data from
* @return 8-bit unsigned value stored in specified address
*/
#define M8(addr) (*((vu8 *) (addr)))
/**
* @brief Get a 16-bit unsigned value from specified address
* @param[in] addr Address to get 16-bit data from
* @return 16-bit unsigned value stored in specified address
* @note The input address must be 16-bit aligned
*/
#define M16(addr) (*((vu16 *) (addr)))
/**
* @brief Get a 32-bit unsigned value from specified address
* @param[in] addr Address to get 32-bit data from
* @return 32-bit unsigned value stored in specified address
* @note The input address must be 32-bit aligned
*/
#define M32(addr) (*((vu32 *) (addr)))
/**
* @brief Set a 32-bit unsigned value to specified I/O port
* @param[in] port Port address to set 32-bit data
* @param[in] value Value to write to I/O port
* @return None
* @note The output port must be 32-bit aligned
*/
#define outpw(port,value) (*((volatile unsigned int *)(port))=(value))
/**
* @brief Get a 32-bit unsigned value from specified I/O port
* @param[in] port Port address to get 32-bit data from
* @return 32-bit unsigned value stored in specified I/O port
* @note The input port must be 32-bit aligned
*/
#define inpw(port) ((*((volatile unsigned int *)(port))))
/**
* @brief Set a 16-bit unsigned value to specified I/O port
* @param[in] port Port address to set 16-bit data
* @param[in] value Value to write to I/O port
* @return None
* @note The output port must be 16-bit aligned
*/
#define outps(port,value) (*((volatile unsigned short *)(port))=(value))
/**
* @brief Get a 16-bit unsigned value from specified I/O port
* @param[in] port Port address to get 16-bit data from
* @return 16-bit unsigned value stored in specified I/O port
* @note The input port must be 16-bit aligned
*/
#define inps(port) ((*((volatile unsigned short *)(port))))
/**
* @brief Set a 8-bit unsigned value to specified I/O port
* @param[in] port Port address to set 8-bit data
* @param[in] value Value to write to I/O port
* @return None
*/
#define outpb(port,value) (*((volatile unsigned char *)(port))=(value))
/**
* @brief Get a 8-bit unsigned value from specified I/O port
* @param[in] port Port address to get 8-bit data from
* @return 8-bit unsigned value stored in specified I/O port
*/
#define inpb(port) ((*((volatile unsigned char *)(port))))
/**
* @brief Set a 32-bit unsigned value to specified I/O port
* @param[in] port Port address to set 32-bit data
* @param[in] value Value to write to I/O port
* @return None
* @note The output port must be 32-bit aligned
*/
#define outp32(port,value) (*((volatile unsigned int *)(port))=(value))
/**
* @brief Get a 32-bit unsigned value from specified I/O port
* @param[in] port Port address to get 32-bit data from
* @return 32-bit unsigned value stored in specified I/O port
* @note The input port must be 32-bit aligned
*/
#define inp32(port) ((*((volatile unsigned int *)(port))))
/**
* @brief Set a 16-bit unsigned value to specified I/O port
* @param[in] port Port address to set 16-bit data
* @param[in] value Value to write to I/O port
* @return None
* @note The output port must be 16-bit aligned
*/
#define outp16(port,value) (*((volatile unsigned short *)(port))=(value))
/**
* @brief Get a 16-bit unsigned value from specified I/O port
* @param[in] port Port address to get 16-bit data from
* @return 16-bit unsigned value stored in specified I/O port
* @note The input port must be 16-bit aligned
*/
#define inp16(port) ((*((volatile unsigned short *)(port))))
/**
* @brief Set a 8-bit unsigned value to specified I/O port
* @param[in] port Port address to set 8-bit data
* @param[in] value Value to write to I/O port
* @return None
*/
#define outp8(port,value) (*((volatile unsigned char *)(port))=(value))
/**
* @brief Get a 8-bit unsigned value from specified I/O port
* @param[in] port Port address to get 8-bit data from
* @return 8-bit unsigned value stored in specified I/O port
*/
#define inp8(port) ((*((volatile unsigned char *)(port))))
/** @} end of group IO_ROUTINE */
/******************************************************************************/
/* Legacy Constants */
/******************************************************************************/
/** @addtogroup Legacy_Constants Legacy Constants
Legacy Constants
@{
*/
#define E_SUCCESS (0)
#ifndef NULL
#define NULL (0) ///< NULL pointer
#endif
#define TRUE (1UL) ///< Boolean true, define to use in API parameters or return value
#define FALSE (0UL) ///< Boolean false, define to use in API parameters or return value
#define ENABLE (1UL) ///< Enable, define to use in API parameters
#define DISABLE (0UL) ///< Disable, define to use in API parameters
/* Define one bit mask */
#define BIT0 (0x00000001UL) ///< Bit 0 mask of an 32 bit integer
#define BIT1 (0x00000002UL) ///< Bit 1 mask of an 32 bit integer
#define BIT2 (0x00000004UL) ///< Bit 2 mask of an 32 bit integer
#define BIT3 (0x00000008UL) ///< Bit 3 mask of an 32 bit integer
#define BIT4 (0x00000010UL) ///< Bit 4 mask of an 32 bit integer
#define BIT5 (0x00000020UL) ///< Bit 5 mask of an 32 bit integer
#define BIT6 (0x00000040UL) ///< Bit 6 mask of an 32 bit integer
#define BIT7 (0x00000080UL) ///< Bit 7 mask of an 32 bit integer
#define BIT8 (0x00000100UL) ///< Bit 8 mask of an 32 bit integer
#define BIT9 (0x00000200UL) ///< Bit 9 mask of an 32 bit integer
#define BIT10 (0x00000400UL) ///< Bit 10 mask of an 32 bit integer
#define BIT11 (0x00000800UL) ///< Bit 11 mask of an 32 bit integer
#define BIT12 (0x00001000UL) ///< Bit 12 mask of an 32 bit integer
#define BIT13 (0x00002000UL) ///< Bit 13 mask of an 32 bit integer
#define BIT14 (0x00004000UL) ///< Bit 14 mask of an 32 bit integer
#define BIT15 (0x00008000UL) ///< Bit 15 mask of an 32 bit integer
#define BIT16 (0x00010000UL) ///< Bit 16 mask of an 32 bit integer
#define BIT17 (0x00020000UL) ///< Bit 17 mask of an 32 bit integer
#define BIT18 (0x00040000UL) ///< Bit 18 mask of an 32 bit integer
#define BIT19 (0x00080000UL) ///< Bit 19 mask of an 32 bit integer
#define BIT20 (0x00100000UL) ///< Bit 20 mask of an 32 bit integer
#define BIT21 (0x00200000UL) ///< Bit 21 mask of an 32 bit integer
#define BIT22 (0x00400000UL) ///< Bit 22 mask of an 32 bit integer
#define BIT23 (0x00800000UL) ///< Bit 23 mask of an 32 bit integer
#define BIT24 (0x01000000UL) ///< Bit 24 mask of an 32 bit integer
#define BIT25 (0x02000000UL) ///< Bit 25 mask of an 32 bit integer
#define BIT26 (0x04000000UL) ///< Bit 26 mask of an 32 bit integer
#define BIT27 (0x08000000UL) ///< Bit 27 mask of an 32 bit integer
#define BIT28 (0x10000000UL) ///< Bit 28 mask of an 32 bit integer
#define BIT29 (0x20000000UL) ///< Bit 29 mask of an 32 bit integer
#define BIT30 (0x40000000UL) ///< Bit 30 mask of an 32 bit integer
#define BIT31 (0x80000000UL) ///< Bit 31 mask of an 32 bit integer
/* Byte Mask Definitions */
#define BYTE0_Msk (0x000000FFUL) ///< Mask to get bit0~bit7 from a 32 bit integer
#define BYTE1_Msk (0x0000FF00UL) ///< Mask to get bit8~bit15 from a 32 bit integer
#define BYTE2_Msk (0x00FF0000UL) ///< Mask to get bit16~bit23 from a 32 bit integer
#define BYTE3_Msk (0xFF000000UL) ///< Mask to get bit24~bit31 from a 32 bit integer
#define GET_BYTE0(u32Param) (((u32Param) & BYTE0_Msk) ) /*!< Extract Byte 0 (Bit 0~ 7) from parameter u32Param */
#define GET_BYTE1(u32Param) (((u32Param) & BYTE1_Msk) >> 8) /*!< Extract Byte 1 (Bit 8~15) from parameter u32Param */
#define GET_BYTE2(u32Param) (((u32Param) & BYTE2_Msk) >> 16) /*!< Extract Byte 2 (Bit 16~23) from parameter u32Param */
#define GET_BYTE3(u32Param) (((u32Param) & BYTE3_Msk) >> 24) /*!< Extract Byte 3 (Bit 24~31) from parameter u32Param */
/** @} end of group Legacy_Constants */
#endif /* __M251_H__ */
Reference in New Issue View Git Blame Copy Permalink