Macintosh-SW/mac-rom-simm-programmer
1
0
Fork 0
mirror of https://github.com/dougg3/mac-rom-simm-programmer.git synced 2024-12-11 07:50:36 +00:00
Code Issues Projects Releases Wiki Activity
71164460f3
mac-rom-simm-programmer/hal/m258ke/nuvoton/rtc_reg.h

787 lines
58 KiB
C
Raw Blame History

/**************************************************************************//**
* @file rtc_reg.h
* @version V1.00
* @brief RTC register definition header file
*
* SPDX-License-Identifier: Apache-2.0
* @copyright (C) 2019 Nuvoton Technology Corp. All rights reserved.
*****************************************************************************/
#ifndef __RTC_REG_H__
#define __RTC_REG_H__
#if defined ( __CC_ARM )
#pragma anon_unions
#endif
/**
@addtogroup REGISTER Control Register
@{
*/
/**
@addtogroup RTC Real Time Clock Controller (RTC)
Memory Mapped Structure for RTC Controller
@{
*/
typedef struct
{
/**
* @var RTC_T::INIT
* Offset: 0x00 RTC Initiation Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |INIT_ACTIVE|RTC Active Status (Read Only)
* | | |0 = RTC is at reset state.
* | | |1 = RTC is at normal active state.
* |[31:1] |INIT |RTC Initiation (Write Only)
* | | |When RTC block is powered on, RTC is at reset state.
* | | |User has to write a number (0xa5eb1357) to INIT to make RTC leave reset state.
* | | |Once the INIT is written as 0xa5eb1357, the RTC will be in un-reset state permanently.
* | | |The INIT is a write-only field and read value will be always 0.
* @var RTC_T::FREQADJ
* Offset: 0x08 RTC Frequency Compensation Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[5:0] |FRACTION |Fraction Part
* | | |Formula: FRACTION = (fraction part of detected value) X 64.
* | | |Note: Digit in FCR must be expressed as hexadecimal number.
* |[12:8] |INTEGER |Integer Part
* | | |00000 = Integer part of detected value is 32752.
* | | |00001 = Integer part of detected value is 32753.
* | | |00010 = Integer part of detected value is 32754.
* | | |00011 = Integer part of detected value is 32755.
* | | |00100 = Integer part of detected value is 32756.
* | | |00101 = Integer part of detected value is 32757.
* | | |00110 = Integer part of detected value is 32758.
* | | |00111 = Integer part of detected value is 32759.
* | | |01000 = Integer part of detected value is 32760.
* | | |01001 = Integer part of detected value is 32761.
* | | |01010 = Integer part of detected value is 32762.
* | | |01011 = Integer part of detected value is 32763.
* | | |01100 = Integer part of detected value is 32764.
* | | |01101 = Integer part of detected value is 32765.
* | | |01110 = Integer part of detected value is 32766.
* | | |01111 = Integer part of detected value is 32767.
* | | |10000 = Integer part of detected value is 32768.
* | | |10001 = Integer part of detected value is 32769.
* | | |10010 = Integer part of detected value is 32770.
* | | |10011 = Integer part of detected value is 32771.
* | | |10100 = Integer part of detected value is 32772.
* | | |10101 = Integer part of detected value is 32773.
* | | |10110 = Integer part of detected value is 32774.
* | | |10111 = Integer part of detected value is 32775.
* | | |11000 = Integer part of detected value is 32776.
* | | |11001 = Integer part of detected value is 32777.
* | | |11010 = Integer part of detected value is 32778.
* | | |11011 = Integer part of detected value is 32779.
* | | |11100 = Integer part of detected value is 32780.
* | | |11101 = Integer part of detected value is 32781.
* | | |11110 = Integer part of detected value is 32782.
* | | |11111 = Integer part of detected value is 32783.
* |[31] |FCRBUSY |Frequency Compensation Register Write Operation Busy (Read Only) (only for M252_C/E)
* | | |0 = The new register write operation is acceptable.
* | | |1 = The last write operation is in progress and new register write operation prohibited.
* | | |Note: This bit is only used when DCOMPEN(RTC_CLKFMT[16]) enabled.
* @var RTC_T::TIME
* Offset: 0x0C RTC Time Loading Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[3:0] |SEC |1-Sec Time Digit (0~9)
* |[6:4] |TENSEC |10-Sec Time Digit (0~5)
* |[11:8] |MIN |1-Min Time Digit (0~9)
* |[14:12] |TENMIN |10-Min Time Digit (0~5)
* |[19:16] |HR |1-Hour Time Digit (0~9)
* |[21:20] |TENHR |10-Hour Time Digit (0~2)
* | | |When RTC runs as 12-hour time scale mode, RTC_TIME[21] (the high bit of TENHR[1:0])
* | | |means AM/PM indication (If RTC_TIME[21] is 1, it indicates PM time message.)
* @var RTC_T::CAL
* Offset: 0x10 RTC Calendar Loading Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[3:0] |DAY |1-Day Calendar Digit (0~9)
* |[5:4] |TENDAY |10-Day Calendar Digit (0~3)
* |[11:8] |MON |1-Month Calendar Digit (0~9)
* |[12] |TENMON |10-Month Calendar Digit (0~1)
* |[19:16] |YEAR |1-Year Calendar Digit (0~9)
* |[23:20] |TENYEAR |10-Year Calendar Digit (0~9)
* @var RTC_T::CLKFMT
* Offset: 0x14 RTC Time Scale Selection Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |24HEN |24-hour / 12-hour Time Scale Selection
* | | |Indicates that RTC_TIME and RTC_TALM are in 24-hour time scale or 12-hour time scale.
* | | |0 = 12-hour time scale with AM and PM indication selected.
* | | |1 = 24-hour time scale selected.
* |[16] |DCOMPEN |Dynamic Compensation Enable Bit (only for M252_C/E)
* | | |0 = Dynamic Compensation Disabled.
* | | |1 = Dynamic Compensation Enabled.
* @var RTC_T::WEEKDAY
* Offset: 0x18 RTC Day of the Week Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[2:0] |WEEKDAY |Day of the Week Register
* | | |000 = Sunday.
* | | |001 = Monday.
* | | |010 = Tuesday.
* | | |011 = Wednesday.
* | | |100 = Thursday.
* | | |101 = Friday.
* | | |110 = Saturday.
* | | |111 = Reserved.
* @var RTC_T::TALM
* Offset: 0x1C RTC Time Alarm Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[3:0] |SEC |1-Sec Time Digit of Alarm Setting (0~9)
* |[6:4] |TENSEC |10-Sec Time Digit of Alarm Setting (0~5)
* |[11:8] |MIN |1-Min Time Digit of Alarm Setting (0~9)
* |[14:12] |TENMIN |10-Min Time Digit of Alarm Setting (0~5)
* |[19:16] |HR |1-Hour Time Digit of Alarm Setting (0~9)
* |[21:20] |TENHR |10-Hour Time Digit of Alarm Setting (0~2)
* | | |When RTC runs as 12-hour time scale mode, RTC_TIME[21] (the high bit of TENHR[1:0])
* | | |means AM/PM indication (If RTC_TIME[21] is 1, it indicates PM time message.)
* @var RTC_T::CALM
* Offset: 0x20 RTC Calendar Alarm Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[3:0] |DAY |1-Day Calendar Digit of Alarm Setting (0~9)
* |[5:4] |TENDAY |10-Day Calendar Digit of Alarm Setting (0~3)
* |[11:8] |MON |1-Month Calendar Digit of Alarm Setting (0~9)
* |[12] |TENMON |10-Month Calendar Digit of Alarm Setting (0~1)
* |[19:16] |YEAR |1-Year Calendar Digit of Alarm Setting (0~9)
* |[23:20] |TENYEAR |10-Year Calendar Digit of Alarm Setting (0~9)
* @var RTC_T::LEAPYEAR
* Offset: 0x24 RTC Leap Year Indicator Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |LEAPYEAR |Leap Year Indication Register (Read Only)
* | | |0 = This year is not a leap year.
* | | |1 = This year is leap year.
* @var RTC_T::INTEN
* Offset: 0x28 RTC Interrupt Enable Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |ALMIEN |Alarm Interrupt Enable Bit
* | | |Set ALMIEN to 1 can also enable chip wake-up function when RTC alarm interrupt event is generated.
* | | |0 = RTC Alarm interrupt Disabled.
* | | |1 = RTC Alarm interrupt Enabled.
* |[1] |TICKIEN |Time Tick Interrupt Enable Bit
* | | |Set TICKIEN to 1 can also enable chip wake-up function when RTC tick interrupt event is generated.
* | | |0 = RTC Time Tick interrupt Disabled.
* | | |1 = RTC Time Tick interrupt Enabled.
* |[8] |TAMP0IEN |Tamper 0 Interrupt Enable Bit
* | | |Set TAMP0IEN to 1 can also enable chip wake-up function when tamper 0 interrupt event is generated.
* | | |0 = Tamper 0 interrupt Disabled.
* | | |1 = Tamper 0 interrupt Enabled.
* @var RTC_T::INTSTS
* Offset: 0x2C RTC Interrupt Status Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |ALMIF |RTC Alarm Interrupt Flag
* | | |0 = Alarm condition is not matched.
* | | |1 = Alarm condition is matched.
* | | |Note: Write 1 to clear this bit.
* |[1] |TICKIF |RTC Time Tick Interrupt Flag
* | | |0 = Tick condition does not occur.
* | | |1 = Tick condition occur.
* | | |Note: Write 1 to clear this bit.
* |[8] |TAMP0IF |Tamper 0 Interrupt Flag
* | | |0 = No Tamper 0 interrupt flag is generated.
* | | |1 = Tamper 0 interrupt flag is generated.
* | | |Note1: Write 1 to clear this bit.
* @var RTC_T::TICK
* Offset: 0x30 RTC Time Tick Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[2:0] |TICK |Time Tick Register
* | | |These bits are used to select RTC time tick period for Periodic Time Tick Interrupt request.
* | | |000 = Time tick is 1 second.
* | | |001 = Time tick is 1/2 second.
* | | |010 = Time tick is 1/4 second.
* | | |011 = Time tick is 1/8 second.
* | | |100 = Time tick is 1/16 second.
* | | |101 = Time tick is 1/32 second.
* | | |110 = Time tick is 1/64 second.
* | | |111 = Time tick is 1/128 second.
* @var RTC_T::TAMSK
* Offset: 0x34 RTC Time Alarm Mask Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |MSEC |Mask 1-Sec Time Digit of Alarm Setting (0~9)
* |[1] |MTENSEC |Mask 10-Sec Time Digit of Alarm Setting (0~5)
* |[2] |MMIN |Mask 1-Min Time Digit of Alarm Setting (0~9)
* |[3] |MTENMIN |Mask 10-Min Time Digit of Alarm Setting (0~5)
* |[4] |MHR |Mask 1-Hour Time Digit of Alarm Setting (0~9)
* |[5] |MTENHR |Mask 10-Hour Time Digit of Alarm Setting (0~2)
* @var RTC_T::CAMSK
* Offset: 0x38 RTC Calendar Alarm Mask Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |MDAY |Mask 1-Day Calendar Digit of Alarm Setting (0~9)
* |[1] |MTENDAY |Mask 10-Day Calendar Digit of Alarm Setting (0~3)
* |[2] |MMON |Mask 1-Month Calendar Digit of Alarm Setting (0~9)
* |[3] |MTENMON |Mask 10-Month Calendar Digit of Alarm Setting (0~1)
* |[4] |MYEAR |Mask 1-Year Calendar Digit of Alarm Setting (0~9)
* |[5] |MTENYEAR |Mask 10-Year Calendar Digit of Alarm Setting (0~9)
* @var RTC_T::SPRCTL
* Offset: 0x3C RTC Spare Functional Control Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |SPRCLRM |Spare Register Clear Mask Bit
* | | |0 = Spare register will be clear after TAMPER occur.
* | | |1 = Spare register will not be clear after TAMPER occur.
* |[2] |SPRRWEN |Spare Register Enable Bit
* | | |0 = Spare register is Disabled.
* | | |1 = Spare register is Enabled.
* | | |Note: When spare register is disabled, RTC_SPR0 ~ RTC_SPR4 cannot be accessed.
* |[5] |SPRCSTS |SPR Clear Flag
* | | |This bit indicates if the RTC_SPR0 ~ RTC_SPR4 content is cleared when specify tamper event is detected.
* | | |0 = Spare register content is not cleared.
* | | |1 = Spare register content is cleared.
* | | |Note1:Writes 1 to clear this bit.
* | | |Note2:This bit keep 1 when RTC_INTSTS[8] is not equal to 0.
* @var RTC_T::SPR
* Offset: 0x40~0x50 RTC Spare Register 0/1/2/3/4
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[31:0] |SPARE |Spare Register
* | | |This field is used to store back-up information defined by user.
* | | |This field will be cleared by hardware automatically once a tamper pin event is detected.
* | | |Before storing back-up information in to RTC_SPRx register, user should check the register
* | | |read/write enable bit SPRRWEN (RTC_SPRCTL[2]) is enabled.
* @var RTC_T::LXTCTL
* Offset: 0x100 RTC 32KHz Oscillator Control Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[3:1] |GAIN |Oscillator Gain Option
* | | |User can select oscillator gain according to crystal external loading and operating temperature range.
* | | |The larger gain value corresponding to stronger driving capability and higher power consumption.
* | | |000 = L0 mode.
* | | |001 = L1 mode.
* | | |010 = L2 mode.
* | | |011 = L3 mode.
* | | |100 = L4 mode(Only for VBAT domain).
* | | |101 = L5 mode(Only for VBAT domain).
* | | |110 = L6 mode(Only for VBAT domain).
* | | |111 = L7 mode(Only for VBAT domain).
* |[7] |C32KS |RTC Clock 32K Source Selection:
* | | |0 = Internal RTC clock is from 32K crystal .
* | | |1 = Internal RTC clock is from LIRC.
* |[8] |IOCTLSEL |IO Pin Backup Control Selection (Only for VBAT Domain)
* | | |When low speed 32 kHz oscillator is disabled or TAMP0EN is disabled, PF.4 pin (X32KO pin), PF.5 pin (X32KI pin) or
* | | |PF.6 pin (TAMPER0 pin) can be used as GPIO function.User can program IOCTLSEL to decide PF.4, 5, 6 I/O function
* | | |is controlled by system power domain GPIO module or VBAT power domain RTC_GPIOCTL0 control register.
* | | |0 = PF.4, 5, 6 pin I/O function is controlled by GPIO module.
* | | |1 = PF.4, 5, 6 pin I/O function is controlled by VBAT power domain.
* | | |Note1: IOCTLSEL will automatically be set by hardware to 1 when system power is off and RTC_GPIOCTL0 had been configured.
* | | |Note2: The GPIO control feature is not supported when there is not any VBAT power domain.
* |[13] |RTCLVDPD |RTC Low Voltage Detector Power Down (Only for VBAT domain)
* | | |0= RTC Low Voltage Detector active..
* | | |1= RTC Low Voltage Detector enter power down.
* |[14] |RTCPORPD |RTC Power on Reset Power Down (Only for VBAT domain)
* | | |0= RTC POR active 1sec after first power up.
* | | |1= RTC POR enter power down.
* | | |Note: This bit only can be set to 1.
* @var RTC_T::GPIOCTL0
* Offset: 0x104 RTC GPIO Control 0 Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[1:0] |OPMODE0 |IO Operation Mode(Only for VBAT domain)
* | | |00 = PF.4 is input only mode.
* | | |01 = PF.4 is output push pull mode.
* | | |10 = PF.4 is open drain mode.
* | | |11 = PF.4 is quasi-bidirectional mode.
* |[2] |DOUT0 |IO Output Data(Only for VBAT domain)
* | | |0 = PF.4 output low.
* | | |1 = PF.4 output high.
* |[3] |DINOFF0 |IO Pin Digital Input Path Disable Bit (Only for VBAT Domain)
* | | |0 = PF.4 digital input path Enabled.
* | | |1 = PF.4 digital input path Disabled (digital input tied to low).
* |[5:4] |PUSEL0 |IO Pull-up and Pull-down Enable Bits(Only for VBAT domain)
* | | |Determine PF.4 I/O pull-up or pull-down.
* | | |00 = PF.4 pull-up and pull-down disable.
* | | |01 = PF.4 pull-up enable.
* | | |10 = PF.4 pull-down enable.
* | | |11 = PF.4 pull-up and pull-down disable.
* | | |Note:Basically, the pull-up control and pull-down control has following behavior limitation.
* | | |The independent pull-up / pull-down control register only valid when OPMODE0 set as input tri-state
* | | |and open-drain mode.
* |[6] |SMTEN0 |Input Schmitt Trigger Enable Bit(Only for VBAT domain)
* | | |0 = PF.4 input schmitt trigger function Disabled.
* | | |1 = PF.4 input schmitt trigger function Enabled.
* |[9:8] |OPMODE1 |IO Operation Mode(Only for VBAT domain)
* | | |00 = PF.5 is input only mode.
* | | |01 = PF.5 is output push pull mode.
* | | |10 = PF.5 is open drain mode.
* | | |11 = PF.5 is quasi-bidirectional mode.
* |[10] |DOUT1 |IO Output Data(Only for VBAT domain)
* | | |0 = PF.5 output low.
* | | |1 = PF.5 output high.
* |[11] |DINOFF1 |IO Pin State Backup Selection(Only for VBAT domain)
* | | |0 = PF.5 digital input path Enabled.
* | | |1 = PF.5 digital input path Disabled (digital input tied to low).
* |[13:12] |PUSEL1 |IO Pull-up and Pull-down Enable Bits(Only for VBAT domain)
* | | |Determine PF.5 I/O pull-up or pull-down.
* | | |00 = PF.5 pull-up and pull-down disable.
* | | |01 = PF.5 pull-up enable.
* | | |10 = PF.5 pull-down enable.
* | | |11 = PF.5 pull-up and pull-down disable.
* | | |Note:Basically, the pull-up control and pull-down control has following behavior limitation.
* | | |The independent pull-up / pull-down control register only valid when OPMODE1 set as input tri-state
* | | |and open-drain mode.
* |[14] |SMTEN1 |Input Schmitt Trigger Enable Bit(Only for VBAT domain)
* | | |0 = PF.5 input schmitt trigger function Disabled.
* | | |1 = PF.5 input schmitt trigger function Enabled.
* |[17:16] |OPMODE2 |IO Operation Mode(Only for VBAT domain)
* | | |00 = PF.6 is input only mode.
* | | |01 = PF.6 is output push pull mode.
* | | |10 = PF.6 is open drain mode.
* | | |11 = PF.6 is quasi-bidirectional mode.
* |[18] |DOUT2 |IO Output Data(Only for VBAT domain)
* | | |0 = PF.6 output low.
* | | |1 = PF.6 output high.
* |[19] |DINOFF2 |IO Pin Digital Input Path Disable Bit (Only for VBAT Domain)
* | | |0 = PF.6 input schmitt trigger function Disabled.
* | | |1 = PF.6 input schmitt trigger function Enabled.
* |[21:20] |PUSEL2 |IO Pull-up and Pull-down Enable Bits(Only for VBAT domain)
* | | |Determine PF.6 I/O pull-up or pull-down.
* | | |00 = PF.6 pull-up and pull-down disable.
* | | |01 = PF.6 pull-up enable.
* | | |10 = PF.6 pull-down enable.
* | | |11 = PF.6 pull-up and pull-down disable.
* | | |Note:Basically, the pull-up control and pull-down control has following behavior limitation.
* | | |The independent pull-up / pull-down control register only valid when OPMODE2 set as input tri-state
* | | |and open-drain mode and PF6 as tamper pin.
* |[22] |SMTEN2 |Input Schmitt Trigger Enable Bit(Only for VBAT domain)
* | | |0 = PF.6 input schmitt trigger function Disabled.
* | | |1 = PF.6 input schmitt trigger function Enabled.
* @var RTC_T::DSTCTL
* Offset: 0x110 RTC Daylight Saving Time Control Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[0] |ADDHR |Add 1 Hour
* | | |0 = No effect.
* | | |1 = RTC hour digit has been added one hour for summer time change.
* |[1] |SUBHR |Subtract 1 Hour
* | | |0 = No effect.
* | | |1 = RTC hour digit has been subtracted one hour for winter time change.
* |[2] |DSBAK |Daylight Saving Back
* | | |0= Normal mode.
* | | |1= Daylight saving mode.
* @var RTC_T::TAMPCTL
* Offset: 0x120 RTC Tamper Pin Control Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[8] |TAMP0EN |Tamper0 Detect Enable Bit
* | | |0 = Tamper 0 detect Disabled.
* | | |1 = Tamper 0 detect Enabled.
* | | |Note: The reference is RTC-clock. Tamper detector need sync 2 ~ 3 RTC-clock.
* |[9] |TAMP0LV |Tamper 0 Level
* | | |This bit depend on level attribute of tamper pin for static tamper detection.
* | | |0 = Detect Rising detection, will trigger tamper status when RTC_TAMPCTL[11] = 1.
* | | |Detect voltage level should be low. High will trigger tamper status when RTC_TAMPCTL[11] = 0.
* | | |1 = Detect Falling detection, will trigger tamper status when RTC_TAMPCTL[11] = 1.
* | | |Detect voltage level shoulld be high. Low will trigger tamper status when RTC_TAMPCTL[11] = 0.
* |[10] |TAMP0DBEN |Tamper 0 De-bounce Enable Bit
* | | |0 = Tamper 0 de-bounce Disabled.
* | | |1 = Tamper 0 de-bounce Enabled.
* | | |Note: In normal condition (25'C), it can deglitch 1~2 ns noise.
* |[11] |TAMP0TYPE |Tamper 0 Detect Type
* | | |0 = Tamper as edge detector.
* | | |1 = Tamper as Level detector.
* @var RTC_T::TAMPTIME
* Offset: 0x130 RTC Tamper Time Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[3:0] |SEC |1-Sec Time Digit of TAMPER Time (0~9)
* |[6:4] |TENSEC |10-Sec Time Digit of TAMPER Time (0~5)
* |[11:8] |MIN |1-Min Time Digit of TAMPER Time (0~9)
* |[14:12] |TENMIN |10-Min Time Digit of TAMPER Time (0~5)
* |[19:16] |HR |1-Hour Time Digit of TAMPER Time (0~9)
* |[21:20] |TENHR |10-hour Time Digit of TAMPER Time (0~2)
* | | |Note: 24-hour time scale only.
* @var RTC_T::TAMPCAL
* Offset: 0x134 RTC Tamper Calendar Register
* ---------------------------------------------------------------------------------------------------
* |Bits |Field |Descriptions
* | :----: | :----: | :---- |
* |[3:0] |DAY |1-Day Calendar Digit of TAMPER Calendar (0~9)
* |[5:4] |TENDAY |10-Day Calendar Digit of TAMPER Calendar (0~3)
* |[11:8] |MON |1-Month Calendar Digit of TAMPER Calendar (0~9)
* |[12] |TENMON |10-Month Calendar Digit of TAMPER Calendar (0~1)
* |[19:16] |YEAR |1-Year Calendar Digit of TAMPER Calendar (0~9)
* |[23:20] |TENYEAR |10-Year Calendar Digit of TAMPER Calendar (0~9)
*/
__IO uint32_t INIT; /*!< [0x0000] RTC Initiation Register */
/// @cond HIDDEN_SYMBOLS
__I uint32_t RESERVE0[1];
/// @endcond //HIDDEN_SYMBOLS
__IO uint32_t FREQADJ; /*!< [0x0008] RTC Frequency Compensation Register */
__IO uint32_t TIME; /*!< [0x000c] RTC Time Loading Register */
__IO uint32_t CAL; /*!< [0x0010] RTC Calendar Loading Register */
__IO uint32_t CLKFMT; /*!< [0x0014] RTC Time Scale Selection Register */
__IO uint32_t WEEKDAY; /*!< [0x0018] RTC Day of the Week Register */
__IO uint32_t TALM; /*!< [0x001c] RTC Time Alarm Register */
__IO uint32_t CALM; /*!< [0x0020] RTC Calendar Alarm Register */
__I uint32_t LEAPYEAR; /*!< [0x0024] RTC Leap Year Indicator Register */
__IO uint32_t INTEN; /*!< [0x0028] RTC Interrupt Enable Register */
__IO uint32_t INTSTS; /*!< [0x002c] RTC Interrupt Status Register */
__IO uint32_t TICK; /*!< [0x0030] RTC Time Tick Register */
__IO uint32_t TAMSK; /*!< [0x0034] RTC Time Alarm Mask Register */
__IO uint32_t CAMSK; /*!< [0x0038] RTC Calendar Alarm Mask Register */
__IO uint32_t SPRCTL; /*!< [0x003c] RTC Spare Functional Control Register */
__IO uint32_t SPR[5]; /*!< [0x0040 ~ 0x0050] RTC Spare Register 0 ~ 4 */
/// @cond HIDDEN_SYMBOLS
__I uint32_t RESERVE1[43];
/// @endcond //HIDDEN_SYMBOLS
__IO uint32_t LXTCTL; /*!< [0x0100] RTC 32KHz Oscillator Control Register */
__IO uint32_t GPIOCTL0; /*!< [0x0104] RTC GPIO Control 0 Register */
/// @cond HIDDEN_SYMBOLS
__I uint32_t RESERVE2[2];
/// @endcond //HIDDEN_SYMBOLS
__IO uint32_t DSTCTL; /*!< [0x0110] RTC Daylight Saving Time Control Register */
/// @cond HIDDEN_SYMBOLS
__I uint32_t RESERVE3[3];
/// @endcond //HIDDEN_SYMBOLS
__IO uint32_t TAMPCTL; /*!< [0x0120] RTC Tamper Pin Control Register */
/// @cond HIDDEN_SYMBOLS
__I uint32_t RESERVE4[3];
/// @endcond //HIDDEN_SYMBOLS
__I uint32_t TAMPTIME; /*!< [0x0130] RTC Tamper Time Register */
__I uint32_t TAMPCAL; /*!< [0x0134] RTC Tamper Calendar Register */
} RTC_T;
/**
@addtogroup RTC_CONST RTC Bit Field Definition
Constant Definitions for RTC Controller
@{ */
#define RTC_INIT_ACTIVE_Pos (0) /*!< RTC_T::INIT: INIT_ACTIVE Position */
#define RTC_INIT_ACTIVE_Msk (0x1ul << RTC_INIT_ACTIVE_Pos) /*!< RTC_T::INIT: INIT_ACTIVE Mask */
#define RTC_FREQADJ_FRACTION_Pos (0) /*!< RTC_T::FREQADJ: FRACTION Position */
#define RTC_FREQADJ_FRACTION_Msk (0x3ful << RTC_FREQADJ_FRACTION_Pos) /*!< RTC_T::FREQADJ: FRACTION Mask */
#define RTC_FREQADJ_INTEGER_Pos (8) /*!< RTC_T::FREQADJ: INTEGER Position */
#define RTC_FREQADJ_INTEGER_Msk (0x1ful << RTC_FREQADJ_INTEGER_Pos) /*!< RTC_T::FREQADJ: INTEGER Mask */
#define RTC_FREQADJ_FCRBUSY_Pos (31) /*!< RTC_T::FREQADJ: FCRBUSY Position */
#define RTC_FREQADJ_FCRBUSY_Msk (0x1ful << RTC_FREQADJ_FCRBUSY_Pos) /*!< RTC_T::FREQADJ: FCRBUSY Mask */
#define RTC_TIME_SEC_Pos (0) /*!< RTC_T::TIME: SEC Position */
#define RTC_TIME_SEC_Msk (0xful << RTC_TIME_SEC_Pos) /*!< RTC_T::TIME: SEC Mask */
#define RTC_TIME_TENSEC_Pos (4) /*!< RTC_T::TIME: TENSEC Position */
#define RTC_TIME_TENSEC_Msk (0x7ul << RTC_TIME_TENSEC_Pos) /*!< RTC_T::TIME: TENSEC Mask */
#define RTC_TIME_MIN_Pos (8) /*!< RTC_T::TIME: MIN Position */
#define RTC_TIME_MIN_Msk (0xful << RTC_TIME_MIN_Pos) /*!< RTC_T::TIME: MIN Mask */
#define RTC_TIME_TENMIN_Pos (12) /*!< RTC_T::TIME: TENMIN Position */
#define RTC_TIME_TENMIN_Msk (0x7ul << RTC_TIME_TENMIN_Pos) /*!< RTC_T::TIME: TENMIN Mask */
#define RTC_TIME_HR_Pos (16) /*!< RTC_T::TIME: HR Position */
#define RTC_TIME_HR_Msk (0xful << RTC_TIME_HR_Pos) /*!< RTC_T::TIME: HR Mask */
#define RTC_TIME_TENHR_Pos (20) /*!< RTC_T::TIME: TENHR Position */
#define RTC_TIME_TENHR_Msk (0x3ul << RTC_TIME_TENHR_Pos) /*!< RTC_T::TIME: TENHR Mask */
#define RTC_CAL_DAY_Pos (0) /*!< RTC_T::CAL: DAY Position */
#define RTC_CAL_DAY_Msk (0xful << RTC_CAL_DAY_Pos) /*!< RTC_T::CAL: DAY Mask */
#define RTC_CAL_TENDAY_Pos (4) /*!< RTC_T::CAL: TENDAY Position */
#define RTC_CAL_TENDAY_Msk (0x3ul << RTC_CAL_TENDAY_Pos) /*!< RTC_T::CAL: TENDAY Mask */
#define RTC_CAL_MON_Pos (8) /*!< RTC_T::CAL: MON Position */
#define RTC_CAL_MON_Msk (0xful << RTC_CAL_MON_Pos) /*!< RTC_T::CAL: MON Mask */
#define RTC_CAL_TENMON_Pos (12) /*!< RTC_T::CAL: TENMON Position */
#define RTC_CAL_TENMON_Msk (0x1ul << RTC_CAL_TENMON_Pos) /*!< RTC_T::CAL: TENMON Mask */
#define RTC_CAL_YEAR_Pos (16) /*!< RTC_T::CAL: YEAR Position */
#define RTC_CAL_YEAR_Msk (0xful << RTC_CAL_YEAR_Pos) /*!< RTC_T::CAL: YEAR Mask */
#define RTC_CAL_TENYEAR_Pos (20) /*!< RTC_T::CAL: TENYEAR Position */
#define RTC_CAL_TENYEAR_Msk (0xful << RTC_CAL_TENYEAR_Pos) /*!< RTC_T::CAL: TENYEAR Mask */
#define RTC_CLKFMT_24HEN_Pos (0) /*!< RTC_T::CLKFMT: 24HEN Position */
#define RTC_CLKFMT_24HEN_Msk (0x1ul << RTC_CLKFMT_24HEN_Pos) /*!< RTC_T::CLKFMT: 24HEN Mask */
#define RTC_CLKFMT_DCOMPEN_Pos (8) /*!< RTC_T::CLKFMT: DCOMPEN Position */
#define RTC_CLKFMT_DCOMPEN_Msk (0x1ul << RTC_CLKFMT_DCOMPEN_Pos) /*!< RTC_T::CLKFMT: DCOMPEN Mask */
#define RTC_WEEKDAY_WEEKDAY_Pos (0) /*!< RTC_T::WEEKDAY: WEEKDAY Position */
#define RTC_WEEKDAY_WEEKDAY_Msk (0x7ul << RTC_WEEKDAY_WEEKDAY_Pos) /*!< RTC_T::WEEKDAY: WEEKDAY Mask */
#define RTC_TALM_SEC_Pos (0) /*!< RTC_T::TALM: SEC Position */
#define RTC_TALM_SEC_Msk (0xful << RTC_TALM_SEC_Pos) /*!< RTC_T::TALM: SEC Mask */
#define RTC_TALM_TENSEC_Pos (4) /*!< RTC_T::TALM: TENSEC Position */
#define RTC_TALM_TENSEC_Msk (0x7ul << RTC_TALM_TENSEC_Pos) /*!< RTC_T::TALM: TENSEC Mask */
#define RTC_TALM_MIN_Pos (8) /*!< RTC_T::TALM: MIN Position */
#define RTC_TALM_MIN_Msk (0xful << RTC_TALM_MIN_Pos) /*!< RTC_T::TALM: MIN Mask */
#define RTC_TALM_TENMIN_Pos (12) /*!< RTC_T::TALM: TENMIN Position */
#define RTC_TALM_TENMIN_Msk (0x7ul << RTC_TALM_TENMIN_Pos) /*!< RTC_T::TALM: TENMIN Mask */
#define RTC_TALM_HR_Pos (16) /*!< RTC_T::TALM: HR Position */
#define RTC_TALM_HR_Msk (0xful << RTC_TALM_HR_Pos) /*!< RTC_T::TALM: HR Mask */
#define RTC_TALM_TENHR_Pos (20) /*!< RTC_T::TALM: TENHR Position */
#define RTC_TALM_TENHR_Msk (0x3ul << RTC_TALM_TENHR_Pos) /*!< RTC_T::TALM: TENHR Mask */
#define RTC_CALM_DAY_Pos (0) /*!< RTC_T::CALM: DAY Position */
#define RTC_CALM_DAY_Msk (0xful << RTC_CALM_DAY_Pos) /*!< RTC_T::CALM: DAY Mask */
#define RTC_CALM_TENDAY_Pos (4) /*!< RTC_T::CALM: TENDAY Position */
#define RTC_CALM_TENDAY_Msk (0x3ul << RTC_CALM_TENDAY_Pos) /*!< RTC_T::CALM: TENDAY Mask */
#define RTC_CALM_MON_Pos (8) /*!< RTC_T::CALM: MON Position */
#define RTC_CALM_MON_Msk (0xful << RTC_CALM_MON_Pos) /*!< RTC_T::CALM: MON Mask */
#define RTC_CALM_TENMON_Pos (12) /*!< RTC_T::CALM: TENMON Position */
#define RTC_CALM_TENMON_Msk (0x1ul << RTC_CALM_TENMON_Pos) /*!< RTC_T::CALM: TENMON Mask */
#define RTC_CALM_YEAR_Pos (16) /*!< RTC_T::CALM: YEAR Position */
#define RTC_CALM_YEAR_Msk (0xful << RTC_CALM_YEAR_Pos) /*!< RTC_T::CALM: YEAR Mask */
#define RTC_CALM_TENYEAR_Pos (20) /*!< RTC_T::CALM: TENYEAR Position */
#define RTC_CALM_TENYEAR_Msk (0xful << RTC_CALM_TENYEAR_Pos) /*!< RTC_T::CALM: TENYEAR Mask */
#define RTC_LEAPYEAR_LEAPYEAR_Pos (0) /*!< RTC_T::LEAPYEAR: LEAPYEAR Position */
#define RTC_LEAPYEAR_LEAPYEAR_Msk (0x1ul << RTC_LEAPYEAR_LEAPYEAR_Pos) /*!< RTC_T::LEAPYEAR: LEAPYEAR Mask */
#define RTC_INTEN_ALMIEN_Pos (0) /*!< RTC_T::INTEN: ALMIEN Position */
#define RTC_INTEN_ALMIEN_Msk (0x1ul << RTC_INTEN_ALMIEN_Pos) /*!< RTC_T::INTEN: ALMIEN Mask */
#define RTC_INTEN_TICKIEN_Pos (1) /*!< RTC_T::INTEN: TICKIEN Position */
#define RTC_INTEN_TICKIEN_Msk (0x1ul << RTC_INTEN_TICKIEN_Pos) /*!< RTC_T::INTEN: TICKIEN Mask */
#define RTC_INTEN_TAMP0IEN_Pos (8) /*!< RTC_T::INTEN: TAMP0IEN Position */
#define RTC_INTEN_TAMP0IEN_Msk (0x1ul << RTC_INTEN_TAMP0IEN_Pos) /*!< RTC_T::INTEN: TAMP0IEN Mask */
#define RTC_INTSTS_ALMIF_Pos (0) /*!< RTC_T::INTSTS: ALMIF Position */
#define RTC_INTSTS_ALMIF_Msk (0x1ul << RTC_INTSTS_ALMIF_Pos) /*!< RTC_T::INTSTS: ALMIF Mask */
#define RTC_INTSTS_TICKIF_Pos (1) /*!< RTC_T::INTSTS: TICKIF Position */
#define RTC_INTSTS_TICKIF_Msk (0x1ul << RTC_INTSTS_TICKIF_Pos) /*!< RTC_T::INTSTS: TICKIF Mask */
#define RTC_INTSTS_TAMP0IF_Pos (8) /*!< RTC_T::INTSTS: TAMP0IF Position */
#define RTC_INTSTS_TAMP0IF_Msk (0x1ul << RTC_INTSTS_TAMP0IF_Pos) /*!< RTC_T::INTSTS: TAMP0IF Mask */
#define RTC_TICK_TICK_Pos (0) /*!< RTC_T::TICK: TICK Position */
#define RTC_TICK_TICK_Msk (0x7ul << RTC_TICK_TICK_Pos) /*!< RTC_T::TICK: TICK Mask */
#define RTC_TAMSK_MSEC_Pos (0) /*!< RTC_T::TAMSK: MSEC Position */
#define RTC_TAMSK_MSEC_Msk (0x1ul << RTC_TAMSK_MSEC_Pos) /*!< RTC_T::TAMSK: MSEC Mask */
#define RTC_TAMSK_MTENSEC_Pos (1) /*!< RTC_T::TAMSK: MTENSEC Position */
#define RTC_TAMSK_MTENSEC_Msk (0x1ul << RTC_TAMSK_MTENSEC_Pos) /*!< RTC_T::TAMSK: MTENSEC Mask */
#define RTC_TAMSK_MMIN_Pos (2) /*!< RTC_T::TAMSK: MMIN Position */
#define RTC_TAMSK_MMIN_Msk (0x1ul << RTC_TAMSK_MMIN_Pos) /*!< RTC_T::TAMSK: MMIN Mask */
#define RTC_TAMSK_MTENMIN_Pos (3) /*!< RTC_T::TAMSK: MTENMIN Position */
#define RTC_TAMSK_MTENMIN_Msk (0x1ul << RTC_TAMSK_MTENMIN_Pos) /*!< RTC_T::TAMSK: MTENMIN Mask */
#define RTC_TAMSK_MHR_Pos (4) /*!< RTC_T::TAMSK: MHR Position */
#define RTC_TAMSK_MHR_Msk (0x1ul << RTC_TAMSK_MHR_Pos) /*!< RTC_T::TAMSK: MHR Mask */
#define RTC_TAMSK_MTENHR_Pos (5) /*!< RTC_T::TAMSK: MTENHR Position */
#define RTC_TAMSK_MTENHR_Msk (0x1ul << RTC_TAMSK_MTENHR_Pos) /*!< RTC_T::TAMSK: MTENHR Mask */
#define RTC_CAMSK_MDAY_Pos (0) /*!< RTC_T::CAMSK: MDAY Position */
#define RTC_CAMSK_MDAY_Msk (0x1ul << RTC_CAMSK_MDAY_Pos) /*!< RTC_T::CAMSK: MDAY Mask */
#define RTC_CAMSK_MTENDAY_Pos (1) /*!< RTC_T::CAMSK: MTENDAY Position */
#define RTC_CAMSK_MTENDAY_Msk (0x1ul << RTC_CAMSK_MTENDAY_Pos) /*!< RTC_T::CAMSK: MTENDAY Mask */
#define RTC_CAMSK_MMON_Pos (2) /*!< RTC_T::CAMSK: MMON Position */
#define RTC_CAMSK_MMON_Msk (0x1ul << RTC_CAMSK_MMON_Pos) /*!< RTC_T::CAMSK: MMON Mask */
#define RTC_CAMSK_MTENMON_Pos (3) /*!< RTC_T::CAMSK: MTENMON Position */
#define RTC_CAMSK_MTENMON_Msk (0x1ul << RTC_CAMSK_MTENMON_Pos) /*!< RTC_T::CAMSK: MTENMON Mask */
#define RTC_CAMSK_MYEAR_Pos (4) /*!< RTC_T::CAMSK: MYEAR Position */
#define RTC_CAMSK_MYEAR_Msk (0x1ul << RTC_CAMSK_MYEAR_Pos) /*!< RTC_T::CAMSK: MYEAR Mask */
#define RTC_CAMSK_MTENYEAR_Pos (5) /*!< RTC_T::CAMSK: MTENYEAR Position */
#define RTC_CAMSK_MTENYEAR_Msk (0x1ul << RTC_CAMSK_MTENYEAR_Pos) /*!< RTC_T::CAMSK: MTENYEAR Mask */
#define RTC_SPRCTL_SPRCLRM_Pos (0) /*!< RTC_T::SPRCTL: SPRCLRM Position */
#define RTC_SPRCTL_SPRCLRM_Msk (0x1ul << RTC_SPRCTL_SPRCLRM_Pos) /*!< RTC_T::SPRCTL: SPRCLRM Mask */
#define RTC_SPRCTL_SPRRWEN_Pos (2) /*!< RTC_T::SPRCTL: SPRRWEN Position */
#define RTC_SPRCTL_SPRRWEN_Msk (0x1ul << RTC_SPRCTL_SPRRWEN_Pos) /*!< RTC_T::SPRCTL: SPRRWEN Mask */
#define RTC_SPRCTL_SPRCSTS_Pos (5) /*!< RTC_T::SPRCTL: SPRCSTS Position */
#define RTC_SPRCTL_SPRCSTS_Msk (0x1ul << RTC_SPRCTL_SPRCSTS_Pos) /*!< RTC_T::SPRCTL: SPRCSTS Mask */
#define RTC_SPR0_SPARE_Pos (0) /*!< RTC_T::SPR0: SPARE Position */
#define RTC_SPR0_SPARE_Msk (0xfffffffful << RTC_SPR0_SPARE_Pos) /*!< RTC_T::SPR0: SPARE Mask */
#define RTC_SPR1_SPARE_Pos (0) /*!< RTC_T::SPR1: SPARE Position */
#define RTC_SPR1_SPARE_Msk (0xfffffffful << RTC_SPR1_SPARE_Pos) /*!< RTC_T::SPR1: SPARE Mask */
#define RTC_SPR2_SPARE_Pos (0) /*!< RTC_T::SPR2: SPARE Position */
#define RTC_SPR2_SPARE_Msk (0xfffffffful << RTC_SPR2_SPARE_Pos) /*!< RTC_T::SPR2: SPARE Mask */
#define RTC_SPR3_SPARE_Pos (0) /*!< RTC_T::SPR3: SPARE Position */
#define RTC_SPR3_SPARE_Msk (0xfffffffful << RTC_SPR3_SPARE_Pos) /*!< RTC_T::SPR3: SPARE Mask */
#define RTC_SPR4_SPARE_Pos (0) /*!< RTC_T::SPR4: SPARE Position */
#define RTC_SPR4_SPARE_Msk (0xfffffffful << RTC_SPR4_SPARE_Pos) /*!< RTC_T::SPR4: SPARE Mask */
#define RTC_LXTCTL_GAIN_Pos (1) /*!< RTC_T::LXTCTL: GAIN Position */
#define RTC_LXTCTL_GAIN_Msk (0x7ul << RTC_LXTCTL_GAIN_Pos) /*!< RTC_T::LXTCTL: GAIN Mask */
#define RTC_LXTCTL_C32KS_Pos (7) /*!< RTC_T::LXTCTL: C32KS Position */
#define RTC_LXTCTL_C32KS_Msk (0x1ul << RTC_LXTCTL_C32KS_Pos) /*!< RTC_T::LXTCTL: C32KS Mask */
#define RTC_LXTCTL_IOCTLSEL_Pos (8) /*!< RTC_T::LXTCTL: IOCTLSEL Position */
#define RTC_LXTCTL_IOCTLSEL_Msk (0x1ul << RTC_LXTCTL_IOCTLSEL_Pos) /*!< RTC_T::LXTCTL: IOCTLSEL Mask */
#define RTC_LXTCTL_RTCLVDPD_Pos (13) /*!< RTC_T::LXTCTL: RTCLVDPD Position */
#define RTC_LXTCTL_RTCLVDPD_Msk (0x1ul << RTC_LXTCTL_RTCLVDPD_Pos) /*!< RTC_T::LXTCTL: RTCLVDPD Mask */
#define RTC_LXTCTL_RTCPORPD_Pos (14) /*!< RTC_T::LXTCTL: RTCPORPD Position */
#define RTC_LXTCTL_RTCPORPD_Msk (0x1ul << RTC_LXTCTL_RTCPORPD_Pos) /*!< RTC_T::LXTCTL: RTCPORPD Mask */
#define RTC_GPIOCTL0_OPMODE0_Pos (0) /*!< RTC_T::GPIOCTL0: OPMODE0 Position */
#define RTC_GPIOCTL0_OPMODE0_Msk (0x3ul << RTC_GPIOCTL0_OPMODE0_Pos) /*!< RTC_T::GPIOCTL0: OPMODE0 Mask */
#define RTC_GPIOCTL0_DOUT0_Pos (2) /*!< RTC_T::GPIOCTL0: DOUT0 Position */
#define RTC_GPIOCTL0_DOUT0_Msk (0x1ul << RTC_GPIOCTL0_DOUT0_Pos) /*!< RTC_T::GPIOCTL0: DOUT0 Mask */
#define RTC_GPIOCTL0_DINOFF0_Pos (3) /*!< RTC_T::GPIOCTL0: DINOFF0 Position */
#define RTC_GPIOCTL0_DINOFF0_Msk (0x1ul << RTC_GPIOCTL0_DINOFF0_Pos) /*!< RTC_T::GPIOCTL0: DINOFF0 Mask */
#define RTC_GPIOCTL0_PUSEL0_Pos (4) /*!< RTC_T::GPIOCTL0: PUSEL0 Position */
#define RTC_GPIOCTL0_PUSEL0_Msk (0x3ul << RTC_GPIOCTL0_PUSEL0_Pos) /*!< RTC_T::GPIOCTL0: PUSEL0 Mask */
#define RTC_GPIOCTL0_SMTEN0_Pos (6) /*!< RTC_T::GPIOCTL0: SMTEN0 Position */
#define RTC_GPIOCTL0_SMTEN0_Msk (0x1ul << RTC_GPIOCTL0_SMTEN0_Pos) /*!< RTC_T::GPIOCTL0: SMTEN0 Mask */
#define RTC_GPIOCTL0_OPMODE1_Pos (8) /*!< RTC_T::GPIOCTL0: OPMODE1 Position */
#define RTC_GPIOCTL0_OPMODE1_Msk (0x3ul << RTC_GPIOCTL0_OPMODE1_Pos) /*!< RTC_T::GPIOCTL0: OPMODE1 Mask */
#define RTC_GPIOCTL0_DOUT1_Pos (10) /*!< RTC_T::GPIOCTL0: DOUT1 Position */
#define RTC_GPIOCTL0_DOUT1_Msk (0x1ul << RTC_GPIOCTL0_DOUT1_Pos) /*!< RTC_T::GPIOCTL0: DOUT1 Mask */
#define RTC_GPIOCTL0_DINOFF1_Pos (11) /*!< RTC_T::GPIOCTL0: DINOFF1 Position */
#define RTC_GPIOCTL0_DINOFF1_Msk (0x1ul << RTC_GPIOCTL0_DINOFF1_Pos) /*!< RTC_T::GPIOCTL0: DINOFF1 Mask */
#define RTC_GPIOCTL0_PUSEL1_Pos (12) /*!< RTC_T::GPIOCTL0: PUSEL1 Position */
#define RTC_GPIOCTL0_PUSEL1_Msk (0x3ul << RTC_GPIOCTL0_PUSEL1_Pos) /*!< RTC_T::GPIOCTL0: PUSEL1 Mask */
#define RTC_GPIOCTL0_SMTEN1_Pos (14) /*!< RTC_T::GPIOCTL0: SMTEN1 Position */
#define RTC_GPIOCTL0_SMTEN1_Msk (0x1ul << RTC_GPIOCTL0_SMTEN1_Pos) /*!< RTC_T::GPIOCTL0: SMTEN1 Mask */
#define RTC_GPIOCTL0_OPMODE2_Pos (16) /*!< RTC_T::GPIOCTL0: OPMODE2 Position */
#define RTC_GPIOCTL0_OPMODE2_Msk (0x3ul << RTC_GPIOCTL0_OPMODE2_Pos) /*!< RTC_T::GPIOCTL0: OPMODE2 Mask */
#define RTC_GPIOCTL0_DOUT2_Pos (18) /*!< RTC_T::GPIOCTL0: DOUT2 Position */
#define RTC_GPIOCTL0_DOUT2_Msk (0x1ul << RTC_GPIOCTL0_DOUT2_Pos) /*!< RTC_T::GPIOCTL0: DOUT2 Mask */
#define RTC_GPIOCTL0_DINOFF2_Pos (19) /*!< RTC_T::GPIOCTL0: DINOFF2 Position */
#define RTC_GPIOCTL0_DINOFF2_Msk (0x1ul << RTC_GPIOCTL0_DINOFF2_Pos) /*!< RTC_T::GPIOCTL0: DINOFF2 Mask */
#define RTC_GPIOCTL0_PUSEL2_Pos (20) /*!< RTC_T::GPIOCTL0: PUSEL2 Position */
#define RTC_GPIOCTL0_PUSEL2_Msk (0x3ul << RTC_GPIOCTL0_PUSEL2_Pos) /*!< RTC_T::GPIOCTL0: PUSEL2 Mask */
#define RTC_GPIOCTL0_SMTEN2_Pos (22) /*!< RTC_T::GPIOCTL0: SMTEN2 Position */
#define RTC_GPIOCTL0_SMTEN2_Msk (0x1ul << RTC_GPIOCTL0_SMTEN2_Pos) /*!< RTC_T::GPIOCTL0: SMTEN2 Mask */
#define RTC_DSTCTL_ADDHR_Pos (0) /*!< RTC_T::DSTCTL: ADDHR Position */
#define RTC_DSTCTL_ADDHR_Msk (0x1ul << RTC_DSTCTL_ADDHR_Pos) /*!< RTC_T::DSTCTL: ADDHR Mask */
#define RTC_DSTCTL_SUBHR_Pos (1) /*!< RTC_T::DSTCTL: SUBHR Position */
#define RTC_DSTCTL_SUBHR_Msk (0x1ul << RTC_DSTCTL_SUBHR_Pos) /*!< RTC_T::DSTCTL: SUBHR Mask */
#define RTC_DSTCTL_DSBAK_Pos (2) /*!< RTC_T::DSTCTL: DSBAK Position */
#define RTC_DSTCTL_DSBAK_Msk (0x1ul << RTC_DSTCTL_DSBAK_Pos) /*!< RTC_T::DSTCTL: DSBAK Mask */
#define RTC_TAMPCTL_TAMP0EN_Pos (8) /*!< RTC_T::TAMPCTL: TAMP0EN Position */
#define RTC_TAMPCTL_TAMP0EN_Msk (0x1ul << RTC_TAMPCTL_TAMP0EN_Pos) /*!< RTC_T::TAMPCTL: TAMP0EN Mask */
#define RTC_TAMPCTL_TAMP0LV_Pos (9) /*!< RTC_T::TAMPCTL: TAMP0LV Position */
#define RTC_TAMPCTL_TAMP0LV_Msk (0x1ul << RTC_TAMPCTL_TAMP0LV_Pos) /*!< RTC_T::TAMPCTL: TAMP0LV Mask */
#define RTC_TAMPCTL_TAMP0DBEN_Pos (10) /*!< RTC_T::TAMPCTL: TAMP0DBEN Position */
#define RTC_TAMPCTL_TAMP0DBEN_Msk (0x1ul << RTC_TAMPCTL_TAMP0DBEN_Pos) /*!< RTC_T::TAMPCTL: TAMP0DBEN Mask */
#define RTC_TAMPCTL_TAMP0TYPE_Pos (11) /*!< RTC_T::TAMPCTL: TAMP0TYPE Position */
#define RTC_TAMPCTL_TAMP0TYPE_Msk (0x1ul << RTC_TAMPCTL_TAMP0TYPE_Pos) /*!< RTC_T::TAMPCTL: TAMP0TYPE Mask */
#define RTC_TAMPTIME_SEC_Pos (0) /*!< RTC_T::TAMPTIME: SEC Position */
#define RTC_TAMPTIME_SEC_Msk (0xful << RTC_TAMPTIME_SEC_Pos) /*!< RTC_T::TAMPTIME: SEC Mask */
#define RTC_TAMPTIME_TENSEC_Pos (4) /*!< RTC_T::TAMPTIME: TENSEC Position */
#define RTC_TAMPTIME_TENSEC_Msk (0x7ul << RTC_TAMPTIME_TENSEC_Pos) /*!< RTC_T::TAMPTIME: TENSEC Mask */
#define RTC_TAMPTIME_MIN_Pos (8) /*!< RTC_T::TAMPTIME: MIN Position */
#define RTC_TAMPTIME_MIN_Msk (0xful << RTC_TAMPTIME_MIN_Pos) /*!< RTC_T::TAMPTIME: MIN Mask */
#define RTC_TAMPTIME_TENMIN_Pos (12) /*!< RTC_T::TAMPTIME: TENMIN Position */
#define RTC_TAMPTIME_TENMIN_Msk (0x7ul << RTC_TAMPTIME_TENMIN_Pos) /*!< RTC_T::TAMPTIME: TENMIN Mask */
#define RTC_TAMPTIME_HR_Pos (16) /*!< RTC_T::TAMPTIME: HR Position */
#define RTC_TAMPTIME_HR_Msk (0xful << RTC_TAMPTIME_HR_Pos) /*!< RTC_T::TAMPTIME: HR Mask */
#define RTC_TAMPTIME_TENHR_Pos (20) /*!< RTC_T::TAMPTIME: TENHR Position */
#define RTC_TAMPTIME_TENHR_Msk (0x3ul << RTC_TAMPTIME_TENHR_Pos) /*!< RTC_T::TAMPTIME: TENHR Mask */
#define RTC_TAMPCAL_DAY_Pos (0) /*!< RTC_T::TAMPCAL: DAY Position */
#define RTC_TAMPCAL_DAY_Msk (0xful << RTC_TAMPCAL_DAY_Pos) /*!< RTC_T::TAMPCAL: DAY Mask */
#define RTC_TAMPCAL_TENDAY_Pos (4) /*!< RTC_T::TAMPCAL: TENDAY Position */
#define RTC_TAMPCAL_TENDAY_Msk (0x3ul << RTC_TAMPCAL_TENDAY_Pos) /*!< RTC_T::TAMPCAL: TENDAY Mask */
#define RTC_TAMPCAL_MON_Pos (8) /*!< RTC_T::TAMPCAL: MON Position */
#define RTC_TAMPCAL_MON_Msk (0xful << RTC_TAMPCAL_MON_Pos) /*!< RTC_T::TAMPCAL: MON Mask */
#define RTC_TAMPCAL_TENMON_Pos (12) /*!< RTC_T::TAMPCAL: TENMON Position */
#define RTC_TAMPCAL_TENMON_Msk (0x1ul << RTC_TAMPCAL_TENMON_Pos) /*!< RTC_T::TAMPCAL: TENMON Mask */
#define RTC_TAMPCAL_YEAR_Pos (16) /*!< RTC_T::TAMPCAL: YEAR Position */
#define RTC_TAMPCAL_YEAR_Msk (0xful << RTC_TAMPCAL_YEAR_Pos) /*!< RTC_T::TAMPCAL: YEAR Mask */
#define RTC_TAMPCAL_TENYEAR_Pos (20) /*!< RTC_T::TAMPCAL: TENYEAR Position */
#define RTC_TAMPCAL_TENYEAR_Msk (0xful << RTC_TAMPCAL_TENYEAR_Pos) /*!< RTC_T::TAMPCAL: TENYEAR Mask */
/** @} RTC_CONST */
/** @} end of RTC register group */
/** @} end of REGISTER group */
#if defined ( __CC_ARM )
#pragma no_anon_unions
#endif
#endif /* __RTC_REG_H__ */
Reference in New Issue View Git Blame Copy Permalink