mirror of
https://github.com/dougg3/mac-rom-simm-programmer.git
synced 2024-12-11 07:50:36 +00:00
173 lines
11 KiB
C
173 lines
11 KiB
C
/**************************************************************************//**
|
|
* @file wdt_reg.h
|
|
* @version V1.00
|
|
* @brief WDT register definition header file
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
* @copyright (C) 2019 Nuvoton Technology Corp. All rights reserved.
|
|
*****************************************************************************/
|
|
|
|
#ifndef __WDT_REG_H__
|
|
#define __WDT_REG_H__
|
|
|
|
#if defined ( __CC_ARM )
|
|
#pragma anon_unions
|
|
#endif
|
|
|
|
/**
|
|
@addtogroup REGISTER Control Register
|
|
@{
|
|
*/
|
|
|
|
/**
|
|
@addtogroup WDT Watch Dog Timer Controller (WDT)
|
|
Memory Mapped Structure for WDT Controller
|
|
@{
|
|
*/
|
|
|
|
typedef struct
|
|
{
|
|
|
|
|
|
/**
|
|
* @var WDT_T::CTL
|
|
* Offset: 0x00 WDT Control Register
|
|
* ---------------------------------------------------------------------------------------------------
|
|
* |Bits |Field |Descriptions
|
|
* | :----: | :----: | :---- |
|
|
* |[1] |RSTEN |WDT Time-out Reset Enable Bit (Write Protect)
|
|
* | | |Setting this bit will enable the WDT time-out reset function If the WDT up counter value has not been cleared after the specific WDT reset delay period expires.
|
|
* | | |0 = WDT time-out reset function Disabled.
|
|
* | | |1 = WDT time-out reset function Enabled.
|
|
* | | |Note: This bit is write protected. Refer to the SYS_REGLCTL register.
|
|
* |[2] |RSTF |WDT Time-out Reset Flag
|
|
* | | |This bit indicates the system has been reset by WDT time-out reset or not.
|
|
* | | |0 = WDT time-out reset did not occur.
|
|
* | | |1 = WDT time-out reset occurred.
|
|
* | | |Note: This bit is cleared by writing 1 to it.
|
|
* |[3] |IF |WDT Time-out Interrupt Flag
|
|
* | | |This bit will set to 1 while WDT up counter value reaches the selected WDT time-out interval
|
|
* | | |0 = WDT time-out interrupt did not occur.
|
|
* | | |1 = WDT time-out interrupt occurred.
|
|
* | | |Note: This bit is cleared by writing 1 to it.
|
|
* |[4] |WKEN |WDT Time-out Wake-up Function Control (Write Protect)
|
|
* | | |If this bit is set to 1, while WDT time-out interrupt flag IF (WDT_CTL[3]) is generated to 1 and interrupt enable bit INTEN (WDT_CTL[6]) is enabled, the WDT time-out interrupt signal will generate a wake-up trigger event to chip.
|
|
* | | |0 = Wake-up trigger event Disabled if WDT time-out interrupt signal generated.
|
|
* | | |1 = Wake-up trigger event Enabled if WDT time-out interrupt signal generated.
|
|
* | | |Note1: This bit is write protected. Refer to the SYS_REGLCTL register.
|
|
* | | |Note2: Chip can be woken up by WDT time-out interrupt signal generated only if WDT clock source is selected to 10 kHz internal low speed RC oscillator (LIRC) or LXT.
|
|
* |[5] |WKF |WDT Time-out Wake-up Flag (Write Protect)
|
|
* | | |This bit indicates the interrupt wake-up flag status of WDT
|
|
* | | |0 = WDT does not cause chip wake-up.
|
|
* | | |1 = Chip wake-up from Idle or Power-down mode if WDT time-out interrupt signal generated.
|
|
* | | |Note1: This bit is write protected. Refer to the SYS_REGLCTL register.
|
|
* | | |Note2: This bit is cleared by writing 1 to it.
|
|
* |[6] |INTEN |WDT Time-out Interrupt Enable Bit (Write Protect)
|
|
* | | |If this bit is enabled, the WDT time-out interrupt signal is generated and inform to CPU.
|
|
* | | |0 = WDT time-out interrupt Disabled.
|
|
* | | |1 = WDT time-out interrupt Enabled.
|
|
* | | |Note: This bit is write protected. Refer to the SYS_REGLCTL register.
|
|
* |[7] |WDTEN |WDT Enable Bit (Write Protect)
|
|
* | | |0 = WDT Disabled (This action will reset the internal up counter value).
|
|
* | | |1 = WDT Enabled.
|
|
* | | |Note1: This bit is write protected. Refer to the SYS_REGLCTL register.
|
|
* | | |Note2: If CWDTEN[2:0] (combined by Config0[31] and Config0[4:3]) bits is not configured to 111, this bit is forced as 1 and user cannot change this bit to 0.
|
|
* |[11:8] |TOUTSEL |WDT Time-out Interval Selection (Write Protect)
|
|
* | | |These four bits select the time-out interval period for the WDT.
|
|
* | | |0000 = 2^4 * WDT_CLK.
|
|
* | | |0001 = 2^6 * WDT_CLK.
|
|
* | | |0010 = 2^8 * WDT_CLK.
|
|
* | | |0011 = 2^10 * WDT_CLK.
|
|
* | | |0100 = 2^12 * WDT_CLK.
|
|
* | | |0101 = 2^14 * WDT_CLK.
|
|
* | | |0110 = 2^16 * WDT_CLK.
|
|
* | | |0111 = 2^18 * WDT_CLK.
|
|
* | | |1000 = 2^20 * WDT_CLK.
|
|
* | | |Note: This bit is write protected. Refer to the SYS_REGLCTL register.
|
|
* |[30] |SYNC |WDT Enable Control SYNC Flag Indicator (Read Only)
|
|
* | | |If user executes enable/disable WDTEN (WDT_CTL[7]), this flag can be indicated enable/disable WDTEN function is completed or not.
|
|
* | | |0 = Set WDTEN bit is completed.
|
|
* | | |1 = Set WDTEN bit is synchronizing and not become active yet.
|
|
* | | |Note: Performing enable or disable WDTEN bit needs 2 * WDT_CLK period to become active.
|
|
* |[31] |ICEDEBUG |ICE Debug Mode Acknowledge Disable Bit (Write Protect)
|
|
* | | |0 = ICE debug mode acknowledgement affects WDT counting.
|
|
* | | |WDT up counter will be held while CPU is held by ICE.
|
|
* | | |1 = ICE debug mode acknowledgement Disabled.
|
|
* | | |WDT up counter will keep going no matter CPU is held by ICE or not.
|
|
* | | |Note: This bit is write protected. Refer to the SYS_REGLCTL register.
|
|
* @var WDT_T::ALTCTL
|
|
* Offset: 0x04 WDT Alternative Control Register
|
|
* ---------------------------------------------------------------------------------------------------
|
|
* |Bits |Field |Descriptions
|
|
* | :----: | :----: | :---- |
|
|
* |[1:0] |RSTDSEL |WDT Reset Delay Selection (Write Protect)
|
|
* | | |When WDT time-out happened, user has a time named WDT Reset Delay Period to clear WDT counter by writing 0x00005aa5 to RSTCNT (WDT_RSTCNT[31:0]) to prevent WDT time-out reset happened.
|
|
* | | |User can select a suitable setting of RSTDSEL for different WDT Reset Delay Period.
|
|
* | | |00 = WDT Reset Delay Period is 1026 * WDT_CLK.
|
|
* | | |01 = WDT Reset Delay Period is 130 * WDT_CLK.
|
|
* | | |10 = WDT Reset Delay Period is 18 * WDT_CLK.
|
|
* | | |11 = WDT Reset Delay Period is 3 * WDT_CLK.
|
|
* | | |Note1: This bit is write protected. Refer to the SYS_REGLCTL register.
|
|
* | | |Note2: This register will be reset to 0 if WDT time-out reset happened.
|
|
* @var WDT_T::RSTCNT
|
|
* Offset: 0x08 WDT Reset Counter Register
|
|
* ---------------------------------------------------------------------------------------------------
|
|
* |Bits |Field |Descriptions
|
|
* | :----: | :----: | :---- |
|
|
* |[31:0] |RSTCNT |WDT Reset Counter Register
|
|
* | | |Writing 0x00005AA5 to this field will reset the internal 18-bit WDT up counter value to 0.
|
|
* | | |Note1: Performing RSTCNT to reset counter needs 2 * WDT_CLK period to become active.
|
|
*/
|
|
__IO uint32_t CTL; /*!< [0x0000] WDT Control Register */
|
|
__IO uint32_t ALTCTL; /*!< [0x0004] WDT Alternative Control Register */
|
|
__O uint32_t RSTCNT; /*!< [0x0008] WDT Reset Counter Register */
|
|
} WDT_T;
|
|
|
|
/**
|
|
@addtogroup WDT_CONST WDT Bit Field Definition
|
|
Constant Definitions for WDT Controller
|
|
@{ */
|
|
|
|
#define WDT_CTL_RSTEN_Pos (1) /*!< WDT_T::CTL: RSTEN Position */
|
|
#define WDT_CTL_RSTEN_Msk (0x1ul << WDT_CTL_RSTEN_Pos) /*!< WDT_T::CTL: RSTEN Mask */
|
|
|
|
#define WDT_CTL_RSTF_Pos (2) /*!< WDT_T::CTL: RSTF Position */
|
|
#define WDT_CTL_RSTF_Msk (0x1ul << WDT_CTL_RSTF_Pos) /*!< WDT_T::CTL: RSTF Mask */
|
|
|
|
#define WDT_CTL_IF_Pos (3) /*!< WDT_T::CTL: IF Position */
|
|
#define WDT_CTL_IF_Msk (0x1ul << WDT_CTL_IF_Pos) /*!< WDT_T::CTL: IF Mask */
|
|
|
|
#define WDT_CTL_WKEN_Pos (4) /*!< WDT_T::CTL: WKEN Position */
|
|
#define WDT_CTL_WKEN_Msk (0x1ul << WDT_CTL_WKEN_Pos) /*!< WDT_T::CTL: WKEN Mask */
|
|
|
|
#define WDT_CTL_WKF_Pos (5) /*!< WDT_T::CTL: WKF Position */
|
|
#define WDT_CTL_WKF_Msk (0x1ul << WDT_CTL_WKF_Pos) /*!< WDT_T::CTL: WKF Mask */
|
|
|
|
#define WDT_CTL_INTEN_Pos (6) /*!< WDT_T::CTL: INTEN Position */
|
|
#define WDT_CTL_INTEN_Msk (0x1ul << WDT_CTL_INTEN_Pos) /*!< WDT_T::CTL: INTEN Mask */
|
|
|
|
#define WDT_CTL_WDTEN_Pos (7) /*!< WDT_T::CTL: WDTEN Position */
|
|
#define WDT_CTL_WDTEN_Msk (0x1ul << WDT_CTL_WDTEN_Pos) /*!< WDT_T::CTL: WDTEN Mask */
|
|
|
|
#define WDT_CTL_TOUTSEL_Pos (8) /*!< WDT_T::CTL: TOUTSEL Position */
|
|
#define WDT_CTL_TOUTSEL_Msk (0xful << WDT_CTL_TOUTSEL_Pos) /*!< WDT_T::CTL: TOUTSEL Mask */
|
|
|
|
#define WDT_CTL_SYNC_Pos (30) /*!< WDT_T::CTL: SYNC Position */
|
|
#define WDT_CTL_SYNC_Msk (0x1ul << WDT_CTL_SYNC_Pos) /*!< WDT_T::CTL: SYNC Mask */
|
|
|
|
#define WDT_CTL_ICEDEBUG_Pos (31) /*!< WDT_T::CTL: ICEDEBUG Position */
|
|
#define WDT_CTL_ICEDEBUG_Msk (0x1ul << WDT_CTL_ICEDEBUG_Pos) /*!< WDT_T::CTL: ICEDEBUG Mask */
|
|
|
|
#define WDT_ALTCTL_RSTDSEL_Pos (0) /*!< WDT_T::ALTCTL: RSTDSEL Position */
|
|
#define WDT_ALTCTL_RSTDSEL_Msk (0x3ul << WDT_ALTCTL_RSTDSEL_Pos) /*!< WDT_T::ALTCTL: RSTDSEL Mask */
|
|
|
|
/** @} WDT_CONST */
|
|
/** @} end of WDT register group */
|
|
/** @} end of REGISTER group */
|
|
|
|
#if defined ( __CC_ARM )
|
|
#pragma no_anon_unions
|
|
#endif
|
|
|
|
#endif /* __WDT_REG_H__ */
|