mirror of
https://github.com/dougg3/mac-rom-simm-programmer.git
synced 2024-06-13 02:29:32 +00:00
7425af761a
This makes the code pretty easily portable to other architectures if someone wants to make a more modern SIMM programmer. I also was pretty careful to split responsibilities of the different components and give the existing components better names. I'm pretty happy with the organization of the code now. As part of this change I have also heavily optimized the code. In particular, the read and write cycle routines are very important to the overall performance of the programmer. In these routines I had to make some tradeoffs of code performance versus prettiness, but the overall result is much faster programming. Some of these performance changes are the result of what I discovered when I upgraded my AVR compiler. I discovered that it is smarter at looking at 32-bit variables when I use a union instead of bitwise operations. I also shaved off more CPU cycles by carefully making a few small tweaks. I added a bypass for the "program only some chips" mask, because it was adding unnecessary CPU cycles for a feature that is rarely used. I removed the verification feature from the write routine, because we can always verify the data after the write chunk is complete, which is more efficient. I also added assumptions about the initial/final state of the CS/OE/WE pins, which allowed me to remove more valuable CPU cycles from the read/write cycle routines. There are also a few enormous performance optimizations I should have done a long time ago: 1) The code was only handling one received byte per main loop iteration. Reading every byte available cut nearly a minute off of the 8 MB programming time. 2) The code wasn't taking advantage of the faster programming command available in the chips used on the 8 MB SIMM. The end result of all of these optimizations is I have programming time of the 8 MB SIMM down to 3:31 (it used to be 8:43). Another minor issue I fixed: the Micron SIMM chip identification wasn't working properly. It was outputting the manufacturer ID again instead of the device ID.
147 lines
4.6 KiB
C
147 lines
4.6 KiB
C
/*
|
|
LUFA Library
|
|
Copyright (C) Dean Camera, 2012.
|
|
|
|
dean [at] fourwalledcubicle [dot] com
|
|
www.lufa-lib.org
|
|
*/
|
|
|
|
/*
|
|
Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
|
|
|
|
Permission to use, copy, modify, distribute, and sell this
|
|
software and its documentation for any purpose is hereby granted
|
|
without fee, provided that the above copyright notice appear in
|
|
all copies and that both that the copyright notice and this
|
|
permission notice and warranty disclaimer appear in supporting
|
|
documentation, and that the name of the author not be used in
|
|
advertising or publicity pertaining to distribution of the
|
|
software without specific, written prior permission.
|
|
|
|
The author disclaim all warranties with regard to this
|
|
software, including all implied warranties of merchantability
|
|
and fitness. In no event shall the author be liable for any
|
|
special, indirect or consequential damages or any damages
|
|
whatsoever resulting from loss of use, data or profits, whether
|
|
in an action of contract, negligence or other tortious action,
|
|
arising out of or in connection with the use or performance of
|
|
this software.
|
|
*/
|
|
|
|
#define __INCLUDE_FROM_USB_DRIVER
|
|
#include "ConfigDescriptor.h"
|
|
|
|
#if defined(USB_CAN_BE_HOST)
|
|
uint8_t USB_Host_GetDeviceConfigDescriptor(const uint8_t ConfigNumber,
|
|
uint16_t* const ConfigSizePtr,
|
|
void* const BufferPtr,
|
|
const uint16_t BufferSize)
|
|
{
|
|
uint8_t ErrorCode;
|
|
uint8_t ConfigHeader[sizeof(USB_Descriptor_Configuration_Header_t)];
|
|
|
|
USB_ControlRequest = (USB_Request_Header_t)
|
|
{
|
|
.bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE),
|
|
.bRequest = REQ_GetDescriptor,
|
|
.wValue = ((DTYPE_Configuration << 8) | (ConfigNumber - 1)),
|
|
.wIndex = 0,
|
|
.wLength = sizeof(USB_Descriptor_Configuration_Header_t),
|
|
};
|
|
|
|
Pipe_SelectPipe(PIPE_CONTROLPIPE);
|
|
|
|
if ((ErrorCode = USB_Host_SendControlRequest(ConfigHeader)) != HOST_SENDCONTROL_Successful)
|
|
return ErrorCode;
|
|
|
|
*ConfigSizePtr = le16_to_cpu(DESCRIPTOR_PCAST(ConfigHeader, USB_Descriptor_Configuration_Header_t)->TotalConfigurationSize);
|
|
|
|
if (*ConfigSizePtr > BufferSize)
|
|
return HOST_GETCONFIG_BuffOverflow;
|
|
|
|
USB_ControlRequest.wLength = *ConfigSizePtr;
|
|
|
|
if ((ErrorCode = USB_Host_SendControlRequest(BufferPtr)) != HOST_SENDCONTROL_Successful)
|
|
return ErrorCode;
|
|
|
|
if (DESCRIPTOR_TYPE(BufferPtr) != DTYPE_Configuration)
|
|
return HOST_GETCONFIG_InvalidData;
|
|
|
|
return HOST_GETCONFIG_Successful;
|
|
}
|
|
#endif
|
|
|
|
void USB_GetNextDescriptorOfType(uint16_t* const BytesRem,
|
|
void** const CurrConfigLoc,
|
|
const uint8_t Type)
|
|
{
|
|
while (*BytesRem)
|
|
{
|
|
USB_GetNextDescriptor(BytesRem, CurrConfigLoc);
|
|
|
|
if (DESCRIPTOR_TYPE(*CurrConfigLoc) == Type)
|
|
return;
|
|
}
|
|
}
|
|
|
|
void USB_GetNextDescriptorOfTypeBefore(uint16_t* const BytesRem,
|
|
void** const CurrConfigLoc,
|
|
const uint8_t Type,
|
|
const uint8_t BeforeType)
|
|
{
|
|
while (*BytesRem)
|
|
{
|
|
USB_GetNextDescriptor(BytesRem, CurrConfigLoc);
|
|
|
|
if (DESCRIPTOR_TYPE(*CurrConfigLoc) == Type)
|
|
{
|
|
return;
|
|
}
|
|
else if (DESCRIPTOR_TYPE(*CurrConfigLoc) == BeforeType)
|
|
{
|
|
*BytesRem = 0;
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
void USB_GetNextDescriptorOfTypeAfter(uint16_t* const BytesRem,
|
|
void** const CurrConfigLoc,
|
|
const uint8_t Type,
|
|
const uint8_t AfterType)
|
|
{
|
|
USB_GetNextDescriptorOfType(BytesRem, CurrConfigLoc, AfterType);
|
|
|
|
if (*BytesRem)
|
|
USB_GetNextDescriptorOfType(BytesRem, CurrConfigLoc, Type);
|
|
}
|
|
|
|
uint8_t USB_GetNextDescriptorComp(uint16_t* const BytesRem,
|
|
void** const CurrConfigLoc,
|
|
ConfigComparatorPtr_t const ComparatorRoutine)
|
|
{
|
|
uint8_t ErrorCode;
|
|
|
|
while (*BytesRem)
|
|
{
|
|
uint8_t* PrevDescLoc = *CurrConfigLoc;
|
|
uint16_t PrevBytesRem = *BytesRem;
|
|
|
|
USB_GetNextDescriptor(BytesRem, CurrConfigLoc);
|
|
|
|
if ((ErrorCode = ComparatorRoutine(*CurrConfigLoc)) != DESCRIPTOR_SEARCH_NotFound)
|
|
{
|
|
if (ErrorCode == DESCRIPTOR_SEARCH_Fail)
|
|
{
|
|
*CurrConfigLoc = PrevDescLoc;
|
|
*BytesRem = PrevBytesRem;
|
|
}
|
|
|
|
return ErrorCode;
|
|
}
|
|
}
|
|
|
|
return DESCRIPTOR_SEARCH_COMP_EndOfDescriptor;
|
|
}
|
|
|