Firmware for Mac ROM SIMM programmer

Doug Brown beae025d1a Oops, I was counting too many errors		2011-12-18 10:19:57 -08:00
.settings	Optimized some of my routines and fixed a nasty, nasty bug that was causing the board to crash because of multiple things being outputs simultaneously.	2011-12-13 21:56:20 -08:00
LUFA	Added LUFA into the project, right now just for some demo stuff.	2011-12-09 22:11:31 -08:00
tests	Oops, I was counting too many errors	2011-12-18 10:19:57 -08:00
usb_serial	Started implementing electrical test that tells what pins are shorted to what	2011-12-18 10:18:30 -08:00
.cproject	Started writing more command handling	2011-12-11 08:35:53 -08:00
.gitignore
.project	OK -- so I separated the actual port code from the external memory controller code. I think this makes more sense.	2011-11-27 00:01:29 -08:00
chip_id.h	Started writing more command handling	2011-12-11 08:35:53 -08:00
delay.c	Added delay "adapter" class to keep simm_electrical_test.c completely platform-independent.	2011-12-04 16:30:26 -08:00
delay.h	Added delay "adapter" class to keep simm_electrical_test.c completely platform-independent.	2011-12-04 16:30:26 -08:00
Descriptors.c	Started working on more optimizations, but something weird is happening and it's crashing...not sure why yet.	2011-12-11 21:48:26 -08:00
Descriptors.h	Continued playing with USB serial stuff. I think it's working well now, but I'm running into problems reading from the SIMM, so I need to figure out why I'm not getting the data I expect.	2011-12-10 10:35:41 -08:00
external_mem.c	Fixed the ordering of the chips -- I had the bytes reversed. Now, when I write/read a continuous stream of data, the bytes will correspond with the correct chips.	2011-12-17 11:18:56 -08:00
external_mem.h	Started working on more optimizations, but something weird is happening and it's crashing...not sure why yet.	2011-12-11 21:48:26 -08:00
main.c	Optimized some of my routines and fixed a nasty, nasty bug that was causing the board to crash because of multiple things being outputs simultaneously.	2011-12-13 21:56:20 -08:00
mcp23s17.c	Broke out the SPI read/write into a single routine. Less code repetition -- easier to read and smaller.	2011-12-17 13:43:12 -08:00
mcp23s17.h	OK -- so I separated the actual port code from the external memory controller code. I think this makes more sense.	2011-11-27 00:01:29 -08:00
ports.c	Fixed the ordering of the chips -- I had the bytes reversed. Now, when I write/read a continuous stream of data, the bytes will correspond with the correct chips.	2011-12-17 11:18:56 -08:00
ports.h	OK -- so I separated the actual port code from the external memory controller code. I think this makes more sense.	2011-11-27 00:01:29 -08:00