mirror of
https://github.com/dougg3/mac-rom-simm-programmer.git
synced 2024-11-22 22:31:41 +00:00
8b1cd63210
I can't use GPLv2 as soon as I need to start using the Nuvoton sample code which is licensed with an Apache 2.0 license.
212 lines
6.4 KiB
C
212 lines
6.4 KiB
C
/*
|
|
* mcp23s17.c
|
|
*
|
|
* Created on: Nov 25, 2011
|
|
* Author: Doug
|
|
*
|
|
* Copyright (C) 2011-2023 Doug Brown
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
#include "mcp23s17.h"
|
|
#include "hardware.h"
|
|
|
|
/// Maximum SPI clock rate = 10 MHz
|
|
#define MCP23S17_MAX_CLOCK 10000000UL
|
|
|
|
static void MCP23S17_WriteBothRegs(MCP23S17 *mcp, uint8_t addrA, uint16_t value);
|
|
static uint16_t MCP23S17_ReadBothRegs(MCP23S17 *mcp, uint8_t addrA);
|
|
|
|
/** Initializes an MCP23S17 object
|
|
*
|
|
* @param mcp The MCP23S17 object to initialize
|
|
* @param resetPin The GPIO pin hooked to the reset input
|
|
*/
|
|
void MCP23S17_Init(MCP23S17 *mcp, GPIOPin resetPin)
|
|
{
|
|
SPI_InitDevice(&mcp->spi, MCP23S17_MAX_CLOCK, SPI_MODE_0);
|
|
|
|
// Do a reset pulse if we need to. No need to save the reset pin
|
|
// after that.
|
|
if (!GPIO_IsNull(resetPin))
|
|
{
|
|
GPIO_SetDirection(resetPin, true);
|
|
GPIO_SetOff(resetPin);
|
|
DelayUS(1);
|
|
GPIO_SetOn(resetPin);
|
|
DelayUS(1);
|
|
}
|
|
}
|
|
|
|
/** Begins a set of transactions with the MCP23S17.
|
|
*
|
|
* @param mcp The MCP23S17 to talk with
|
|
*
|
|
* You have to call this before using any of the MCP23S17 functions other than
|
|
* init. This takes control of the SPI bus. If the MCP23S17 is the only device
|
|
* on the bus, you can just call this once in the program. Otherwise, you should
|
|
* release it as soon as you're done so other SPI devices can use the bus instead.
|
|
*/
|
|
void MCP23S17_Begin(MCP23S17 *mcp)
|
|
{
|
|
SPI_RequestBus(&mcp->spi);
|
|
}
|
|
|
|
/** Ends a set of transactions with the MCP23S17.
|
|
*
|
|
* @param mcp The MCP23S17 to release
|
|
*
|
|
* You should call this when you're done talking to the MCP23S17 to free up the
|
|
* SPI bus for other devices.
|
|
*/
|
|
void MCP23S17_End(MCP23S17 *mcp)
|
|
{
|
|
SPI_ReleaseBus(&mcp->spi);
|
|
}
|
|
|
|
/** Sets the data direction register in the MCP23S17
|
|
*
|
|
* @param mcp The MCP23S17
|
|
* @param ddr Bitmask representing direction of the 16 GPIO pins (1 = output, 0 = input)
|
|
*/
|
|
void MCP23S17_SetDDR(MCP23S17 *mcp, uint16_t ddr)
|
|
{
|
|
// The MCP23S17's DDR is backwards from most other chips. I like dealing
|
|
// with it so it behaves like other MCUs, so I invert any DDR values in this
|
|
// driver. In other words, when you set or get the DDR through this driver,
|
|
// the 1s and 0s are backwards from what the MCP23S17's datasheet says, but
|
|
// they are consistent with most MCUs. I value the consistency more.
|
|
MCP23S17_WriteBothRegs(mcp, MCP23S17_IODIRA, ~ddr);
|
|
}
|
|
|
|
/** Reads the data direction register in the MCP23S17
|
|
*
|
|
* @param mcp The MCP23S17
|
|
* @return Bitmask representing direction of the 16 GPIO pins (1 = output, 0 = input)
|
|
*/
|
|
uint16_t MCP23S17_DDR(MCP23S17 *mcp)
|
|
{
|
|
// As I mentioned above, DDR bits are inverted from what the MCP23S17's
|
|
// datasheet says, but consistent with most MCUs
|
|
return ~MCP23S17_ReadBothRegs(mcp, MCP23S17_IODIRA);
|
|
}
|
|
|
|
/** Sets the output values in the MCP23S17
|
|
*
|
|
* @param mcp The MCP23S17
|
|
* @param data Bitmask representing output state of the 16 GPIO pins (1 = high, 0 = low)
|
|
*/
|
|
void MCP23S17_SetOutputs(MCP23S17 *mcp, uint16_t data)
|
|
{
|
|
MCP23S17_WriteBothRegs(mcp, MCP23S17_GPIOA, data);
|
|
}
|
|
|
|
/** Gets the current output values in the MCP23S17
|
|
*
|
|
* @param mcp The MCP23S17
|
|
* @return Bitmask representing output state of the 16 GPIO pins (1 = high, 0 = low)
|
|
*/
|
|
uint16_t MCP23S17_Outputs(MCP23S17 *mcp)
|
|
{
|
|
return MCP23S17_ReadBothRegs(mcp, MCP23S17_OLATA);
|
|
}
|
|
|
|
/** Reads the current input values in the MCP23S17
|
|
*
|
|
* @param mcp The MCP23S17
|
|
* @return Bitmask representing input state of the 16 GPIO pins (1 = high, 0 = low)
|
|
*/
|
|
uint16_t MCP23S17_ReadInputs(MCP23S17 *mcp)
|
|
{
|
|
return MCP23S17_ReadBothRegs(mcp, MCP23S17_GPIOA);
|
|
}
|
|
|
|
/** Enables/disables pullups in the MCP23S17
|
|
*
|
|
* @param mcp The MCP23S17
|
|
* @param pullups Bitmask representing which input pins should have pullups enabled.
|
|
*/
|
|
void MCP23S17_SetPullups(MCP23S17 *mcp, uint16_t pullups)
|
|
{
|
|
MCP23S17_WriteBothRegs(mcp, MCP23S17_GPPUA, pullups);
|
|
}
|
|
|
|
/** Reads the current pullup state in the MCP23S17
|
|
*
|
|
* @param mcp The MCP23S17
|
|
* return Bitmask representing which input pins have pullups enabled.
|
|
*/
|
|
uint16_t MCP23S17_Pullups(MCP23S17 *mcp)
|
|
{
|
|
return MCP23S17_ReadBothRegs(mcp, MCP23S17_GPPUA);
|
|
}
|
|
|
|
/** Helper function that writes two consecutive registers in the MCP23S17
|
|
*
|
|
* @param mcp The MCP23S17
|
|
* @param addrA The address of the first ("A") register
|
|
* @param value The value to write to the A and B registers. High byte = A, low byte = B
|
|
*/
|
|
static void MCP23S17_WriteBothRegs(MCP23S17 *mcp, uint8_t addrA, uint16_t value)
|
|
{
|
|
// addrA should contain the address of the "A" register.
|
|
// the chip should also be in "same bank" mode.
|
|
SPI_Assert(&mcp->spi);
|
|
|
|
// Start off the communication by telling the MCP23S17 that we are writing to a register
|
|
SPI_RWByte(&mcp->spi, MCP23S17_CONTROL_WRITE(0));
|
|
|
|
// Tell it the first register we're writing to (the "A" register)
|
|
SPI_RWByte(&mcp->spi, addrA);
|
|
|
|
// Write the first byte of the register
|
|
SPI_RWByte(&mcp->spi, (uint8_t)((value >> 8) & 0xFF));
|
|
|
|
// It should auto-increment to the "B" register, now write that
|
|
SPI_RWByte(&mcp->spi, (uint8_t)(value & 0xFF));
|
|
|
|
SPI_Deassert(&mcp->spi);
|
|
}
|
|
|
|
/** Helper function that reads two consecutive registers in the MCP23S17
|
|
*
|
|
* @param mcp The MCP23S17
|
|
* @param addrA The address of the first ("A") register
|
|
* @return The value read back from the A and B registers. High byte = A, low byte = B
|
|
*/
|
|
static uint16_t MCP23S17_ReadBothRegs(MCP23S17 *mcp, uint8_t addrA)
|
|
{
|
|
uint16_t returnVal;
|
|
|
|
SPI_Assert(&mcp->spi);
|
|
|
|
// Start off the communication by telling the MCP23S17 that we are reading from a register
|
|
SPI_RWByte(&mcp->spi, MCP23S17_CONTROL_READ(0));
|
|
|
|
// Tell it which register we're reading from (the "A" register)
|
|
SPI_RWByte(&mcp->spi, addrA);
|
|
|
|
// Read the first byte of the register
|
|
returnVal = (((uint16_t)SPI_RWByte(&mcp->spi, 0)) << 8);
|
|
|
|
// It should auto-increment to the "B" register, now read that
|
|
returnVal |= SPI_RWByte(&mcp->spi, 0);
|
|
|
|
SPI_Deassert(&mcp->spi);
|
|
|
|
return returnVal;
|
|
}
|