mirror of
https://github.com/elliotnunn/mac-rom.git
synced 2024-12-29 07:29:15 +00:00
493 lines
18 KiB
Plaintext
493 lines
18 KiB
Plaintext
|
;
|
|||
|
|
; File: SonyRawTrack.a
|
|||
|
|
;
|
|||
|
|
; Contains: Support for the Raw Track Dump control call
|
|||
|
|
;
|
|||
|
|
; Written by: Steve Christensen 09-Nov-90
|
|||
|
|
;
|
|||
|
|
; Copyright: <09> 1990-1992 by Apple Computer, Inc. All rights reserved.
|
|||
|
|
;
|
|||
|
|
; This file is used in these builds: Mac32
|
|||
|
|
;
|
|||
|
|
; Change History (most recent first):
|
|||
|
|
;
|
|||
|
|
; <SM2> 2/18/93 rab Added a TestFor hwCbPwrMgr around the bsr to TurnIWMon so that
|
|||
|
|
; CPUs without a PwrMgr won't get an unimplemented trap error.
|
|||
|
|
; <1> 12/7/92 rab first checked in
|
|||
|
|
; <H9> 9/22/92 DHN Fixed problem in ReadMFM with SWIM2 ASIC where rHandShake bit 8
|
|||
|
|
; (data avail) goes high before its other bits are valid. We read
|
|||
|
|
; rHandShake again to get the valid bits. There are other related
|
|||
|
|
; fixes.
|
|||
|
|
; <H8> 7/21/92 NJV Removed hasSonora1 conditionalized code (no longer needed)
|
|||
|
|
; <H7> 6/4/92 CMP Fixed RawTrackDump to work properly for GCR disks with SWIM2.
|
|||
|
|
; <H6> 3/6/92 CMP Increased mByteTOCnt to 60 to accomodate 33Mhz. CPUs.
|
|||
|
|
; <H5> 12/20/91 JC Temporary Fix for problem in Sonora1
|
|||
|
|
; <4> 11/14/91 SWC Moved SWIM2 check in RawRead to SonyPatches.a. Converted the SCC
|
|||
|
|
; polling code to a macro to make it easier to overpatch.
|
|||
|
|
; <3> 10/24/91 CMP Updated comment header for Horror ROM
|
|||
|
|
; <2> 10/18/91 CMP Added support for SWIM2.
|
|||
|
|
; <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
|||
|
|
; Pre-HORROR ROM comments begin here.
|
|||
|
|
; <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
|||
|
|
; <3> 7/3/91 HJR Changed hasPowerMgr conditional to hasPwrControls.
|
|||
|
|
; <2> 4/22/91 ag SWC/Fixed the parameter checking to be consistent with the IOP
|
|||
|
|
; version. It was returning paramErr if the user specified index
|
|||
|
|
; search mode for a GCR disk (no index pulse). It now forces the
|
|||
|
|
; search mode to immediate instead.
|
|||
|
|
; <1> 2/18/91 HJR first checked in
|
|||
|
|
; 11/9/90 SWC New today.
|
|||
|
|
;__________________________________________________________________________________________________
|
|||
|
|
|
|||
|
|
BLANKS ON
|
|||
|
|
STRING ASIS
|
|||
|
|
|
|||
|
|
|
|||
|
|
; call parameters (relative to csParam)
|
|||
|
|
|
|||
|
|
clockBuffer EQU 0
|
|||
|
|
dataBuffer EQU 4
|
|||
|
|
byteCount EQU 8
|
|||
|
|
numDone EQU 12
|
|||
|
|
searchMode EQU 16
|
|||
|
|
theTrack EQU 18
|
|||
|
|
side EQU 20
|
|||
|
|
sector EQU 21
|
|||
|
|
|
|||
|
|
; searchMode values
|
|||
|
|
|
|||
|
|
searchNow EQU 0
|
|||
|
|
searchAddr EQU 1
|
|||
|
|
searchData EQU 2
|
|||
|
|
searchIndex EQU 3
|
|||
|
|
|
|||
|
|
; misc stuff
|
|||
|
|
|
|||
|
|
indexAddr EQU tachAdr ; drive address to read the index pulse from
|
|||
|
|
|
|||
|
|
rtdParams EQU sectMap ; pointer to params in parameter block
|
|||
|
|
; (steal sectMap since we don't use it at all)
|
|||
|
|
|
|||
|
|
|
|||
|
|
;__________________________________________________________________________________________________
|
|||
|
|
;
|
|||
|
|
; Routine: CtlRawTrackDump
|
|||
|
|
;
|
|||
|
|
; Inputs: A0 -- pointer to caller's parameter block
|
|||
|
|
; A1 -- pointer to SonyVars
|
|||
|
|
; D0 -- error code if the drive number is invalid or the drive is not installed, else zero
|
|||
|
|
; D1 -- drive locals offset
|
|||
|
|
;
|
|||
|
|
; Outputs: D0 -- result code
|
|||
|
|
;
|
|||
|
|
; Trashes: D1-D7,A0-A6
|
|||
|
|
;
|
|||
|
|
; Function: The call reads all or part of a track and returns the raw, unmassaged data it
|
|||
|
|
; finds there so that applications can access a floppy disk at a very low level
|
|||
|
|
; without having to directly access the hardware. The following parameters are
|
|||
|
|
; passed starting at csParam:
|
|||
|
|
;
|
|||
|
|
; 0: clockBuffer pointer to packed bit array (MFM disks only), or nil
|
|||
|
|
; 4: dataBuffer pointer to raw track data, or nil
|
|||
|
|
; 8: byteCount number of bytes requested
|
|||
|
|
; (dataBuffer must be able to hold this many bytes)
|
|||
|
|
; 12: numDone number of bytes actually read (<28> byteCount)
|
|||
|
|
; 16: searchMode when to start collecting bytes:
|
|||
|
|
; 0 = as soon as spindle motor is up to speed
|
|||
|
|
; 1 = after reading an address field
|
|||
|
|
; 2 = after reading a data field
|
|||
|
|
; 3 = at the index mark (MFM disks only)
|
|||
|
|
; 18: track which track to read (0-79)
|
|||
|
|
; 20: side which side to read (0-1)
|
|||
|
|
; 21: sector which sector to synchronize on (0-255)
|
|||
|
|
;
|
|||
|
|
; If clockBitsBuffer is non-nil, it must point to a buffer that's at least 1/8th
|
|||
|
|
; the size of dataBuffer. It consists of a packed array of bits signifying whether
|
|||
|
|
; or not the corresponding byte in dataBuffer is a mark or data byte. If a bit
|
|||
|
|
; is equal to "1", the byte is an MFM mark byte; if it's a "0", the byte is an
|
|||
|
|
; MFM data byte. Bits for ASCENDING data bytes are arranged in DESCENDING order
|
|||
|
|
; within a byte, i.e., bit 7 represents byte 0, bit 6 represents byte 1, etc.
|
|||
|
|
;
|
|||
|
|
; NOTE: If both clockBitsBuffer and dataBuffer are nil, the call will do nothing.
|
|||
|
|
; This provides a way for applications to determine if the call exists
|
|||
|
|
; without first having to allocate large buffers.
|
|||
|
|
;__________________________________________________________________________________________________
|
|||
|
|
|
|||
|
|
CtlRawTrackDump
|
|||
|
|
TST.W D0
|
|||
|
|
BNE DiskDone ; -> bad drive number or no drive
|
|||
|
|
|
|||
|
|
LEA -512(SP),SP ; (get space for a buffer)
|
|||
|
|
MOVE.L SP,DiskBuffer(A1)
|
|||
|
|
|
|||
|
|
; check all parameters and bail if any are out of range...
|
|||
|
|
|
|||
|
|
LEA csParam(A0),A0 ; point to the start of the passed parameters
|
|||
|
|
MOVE.L A0,rtdParams(A1) ; and save the address for later
|
|||
|
|
CLR.L numDone(A0) ; numDone=0
|
|||
|
|
MOVE.L (A0)+,D0 ; are clockBuffer and dataBuffer both nil?
|
|||
|
|
OR.L (A0)+,D0
|
|||
|
|
BEQ.S @toRTDone ; -> yes, just exit
|
|||
|
|
ADDQ.W #searchMode-dataBuffer-4,A0 ; (skip over byteCount)
|
|||
|
|
MOVEQ #paramErr,D0 ; assume something's out of range
|
|||
|
|
MOVE.W (A0)+,D7 ; get the search mode
|
|||
|
|
CMPI.W #searchIndex,D7 ; valid search mode? <2>
|
|||
|
|
BHI.S @toRTDone ; -> nope, bail <2>
|
|||
|
|
BNE.S @CommonMode ; -> common MFM/GCR search mode <2>
|
|||
|
|
TST.B mfmDisk(A1,D1) ; is this an MFM disk? <2>
|
|||
|
|
BMI.S @CommonMode ; -> yes, all modes are OK <2>
|
|||
|
|
|
|||
|
|
CLR.W -2(A0) ; for GCR, force "index search" to "immediate search" <2>
|
|||
|
|
@CommonMode MOVE.W (A0)+,D2 ; get the track number <2>
|
|||
|
|
CMPI.W #80,D2 ; is it in range?
|
|||
|
|
BHS.S @toRTDone ; -> nope
|
|||
|
|
ROL.W #8,D2 ; D2.W=[track][0]
|
|||
|
|
MOVE.B (A0)+,D2 ; get the sector number
|
|||
|
|
CMPI.B #2,D2 ; is it in range?
|
|||
|
|
@toRTDone BHS @RTDone ; -> nope
|
|||
|
|
ASL.B #3,D2 ; shift it into bit 3
|
|||
|
|
ROL.W #8,D2 ; D2.W=[0][0][0][0][side][track (11 bits)]
|
|||
|
|
MOVE.W D2,sideTrack(A1) ; save the side and track numbers
|
|||
|
|
MOVEQ #0,D2
|
|||
|
|
MOVE.B (A0)+,D2
|
|||
|
|
MOVE.W D2,curSector(A1) ; save the sector number
|
|||
|
|
|
|||
|
|
; setup the hardware as appropriate...
|
|||
|
|
|
|||
|
|
IF hasPwrControls THEN ; <3> HJR
|
|||
|
|
TestFor hwCbPwrMgr ; do we have a PowerMgr? <SM2>
|
|||
|
|
BEQ.S @pmgrdone ; if not, skip this call <SM2>
|
|||
|
|
BSR TurnIWMon ; turn the IWM on with a power manager call
|
|||
|
|
@pmgrdone ; <SM2>
|
|||
|
|
ENDIF
|
|||
|
|
|
|||
|
|
TST.B isSWIM(A1) ; is a SWIM installed?
|
|||
|
|
BPL.S @NoSWIM ; -> no, skip
|
|||
|
|
BSR SetChipMode ; set up the mode for MFM or GCR
|
|||
|
|
BNE @RTDone ; -> couldn't initialize the chip
|
|||
|
|
@NoSWIM
|
|||
|
|
BSR DiskSelect ; re-select the interface
|
|||
|
|
BSR FVPowerUp ; and start up the drive (synchronously)
|
|||
|
|
BSR SpdSeek ; seek to track and adjust speed if needed
|
|||
|
|
BNE.S @RTDone ; -> couldn't seek so just exit with an error
|
|||
|
|
|
|||
|
|
; OK, we're on the selected track, so figure out where to start reading...
|
|||
|
|
|
|||
|
|
MOVEQ #4,D0 ; setup the poll stack just in case
|
|||
|
|
BSR SetupPoll ; it's the immediate or index search mode
|
|||
|
|
|
|||
|
|
MOVEA.L rtdParams(A1),A0 ; point to our parameters
|
|||
|
|
MOVE.W searchMode(A0),D7 ; so we can get the search mode (trashed by SpdSeek)
|
|||
|
|
|
|||
|
|
CMPI.W #searchIndex,D7 ; do we need to synch up on the index mark?
|
|||
|
|
BNE.S @NotIndex ; -> nope
|
|||
|
|
BSR.S SyncOnIndex ; go wait for the index pulse before beginning
|
|||
|
|
BEQ.S @ReadNow ; -> we found it so start reading
|
|||
|
|
BRA.S @RTCleanup ; -> couldn't find the index pulse
|
|||
|
|
|
|||
|
|
@NotIndex TST.W D7 ; do we just want to start reading?
|
|||
|
|
|
|||
|
|
BEQ.S @ReadNow ; -> yes, go for it!
|
|||
|
|
|
|||
|
|
; sync up on the desired sector by first looking for its address field...
|
|||
|
|
|
|||
|
|
MOVE.W #255,D6 ; since we can handle sector numbers 0-255...
|
|||
|
|
|
|||
|
|
@SyncLoop BSR RdAddrSetup ; read the next address mark
|
|||
|
|
BMI.S @NextMark ; -> error, ignore this one
|
|||
|
|
|
|||
|
|
CMP.W sideTrack(A1),D1 ; is this the one we want?
|
|||
|
|
BNE.S @NextMark ; -> no, keep looking
|
|||
|
|
|
|||
|
|
CMP.W curSector(A1),D2 ; is this the sector we want?
|
|||
|
|
BEQ.S @FoundAddr ; -> yes, all done
|
|||
|
|
|
|||
|
|
@NextMark BSR toEmptyPD ; get rid of poll data (saves D0 in DskErr)
|
|||
|
|
DBRA D6,@SyncLoop ; -> keep looking
|
|||
|
|
MOVEQ #sectNFErr,D0 ; return "sector not found"
|
|||
|
|
BRA.S @RTDone
|
|||
|
|
|
|||
|
|
@FoundAddr SUBQ.W #searchAddr,D7 ; start reading after address field?
|
|||
|
|
BEQ.S @ReadNow ; -> yes!
|
|||
|
|
|
|||
|
|
; if we get here, we need to first read this sector's data field...
|
|||
|
|
|
|||
|
|
MOVEA.L diskBuffer(A1),A0 ; point to our stack buffer for someplace to put the data
|
|||
|
|
CLR.B DskVerify ; don't verify the data
|
|||
|
|
BSR RdData ; go read the data field
|
|||
|
|
BMI.S @RTDone ; -> an error occurred, so bail
|
|||
|
|
|
|||
|
|
; we're now in the correct position on the disk to begin collecting raw data, so setup and go...
|
|||
|
|
|
|||
|
|
@ReadNow BSR.S RawRead ; go read the bytes
|
|||
|
|
BNE.S @RTCleanup ; -> something bad happened
|
|||
|
|
|
|||
|
|
MOVEA.L SonyVars,A1 ; point to the driver's variables
|
|||
|
|
MOVEA.L rtdParams(A1),A1 ; and from there point to our parameters
|
|||
|
|
MOVE.L byteCount(A1),numDone(A1) ; we were successful, so update how much we read
|
|||
|
|
|
|||
|
|
@RTCleanup BSR toEmptyPD ; get rid of poll data (saves D0 in DskErr)
|
|||
|
|
ANDI.W #$F8FF,SR ; turn interrupts back on
|
|||
|
|
@RTDone LEA 512(SP),SP ; clean up the stack
|
|||
|
|
BRA DskRWOff ; share SonyRWT exit routine
|
|||
|
|
|
|||
|
|
|
|||
|
|
;__________________________________________________________________________________________________
|
|||
|
|
;
|
|||
|
|
; Routine: SyncOnIndex
|
|||
|
|
;
|
|||
|
|
; Inputs: D1 -- offset to drive-specific variables
|
|||
|
|
; A1 -- pointer to driver's variables
|
|||
|
|
;
|
|||
|
|
; Outputs: D0 -- result code
|
|||
|
|
;
|
|||
|
|
; Trashes: D0-D2,A0,A2 (all other registers are preserved)
|
|||
|
|
;
|
|||
|
|
; Function: waits for the start of the index pulse (or times out if it doesn't see it)
|
|||
|
|
;__________________________________________________________________________________________________
|
|||
|
|
|
|||
|
|
SyncOnIndex MOVE.L (SP)+,DskRtnAdr ; save the return address
|
|||
|
|
|
|||
|
|
MOVEQ #indexAddr,D0 ; select the index sense drive address
|
|||
|
|
BSR AdrDisk
|
|||
|
|
|
|||
|
|
MOVEQ #100+10,D2 ; assume HD disk -> 600rpm = 100ms (+10%)
|
|||
|
|
TST.B twoMegFmt(A1,D1) ; is it?
|
|||
|
|
BMI.S @SetTimeout
|
|||
|
|
ADD.W D2,D2 ; no, it's 720K -> 300rpm = 200ms (+10%)
|
|||
|
|
@SetTimeout MULU TimeDBRA,D2 ; figure out how many iterations are in that time
|
|||
|
|
|
|||
|
|
MOVEA.L IWM,A4 ; point to the handshake register for speed
|
|||
|
|
LEA rHandshake(A4),A4
|
|||
|
|
|
|||
|
|
MOVEQ #NoErr,D0 ; assume we'll sync up OK
|
|||
|
|
|
|||
|
|
@WtIndexLo _PollSCC ; poll the SCC modem port <H4>
|
|||
|
|
@NoSCCLo
|
|||
|
|
|
|||
|
|
BTST #3,(A4) ; is the index pulse low yet?
|
|||
|
|
BEQ.S @WtIndexHi ; -> yes, wait for it to go high
|
|||
|
|
SUBQ.L #1,D2
|
|||
|
|
BGT.S @WtIndexLo
|
|||
|
|
BRA.S @NoIndex
|
|||
|
|
|
|||
|
|
@WtIndexHi _PollSCC ; poll the SCC modem port <H4>
|
|||
|
|
@NoSCCHi
|
|||
|
|
|
|||
|
|
BTST #3,(A4) ; is the index pulse high yet?
|
|||
|
|
BNE.S @IndexDone ; -> yes, we're sync'd up
|
|||
|
|
SUBQ.L #1,D2
|
|||
|
|
BGT.S @WtIndexHi
|
|||
|
|
|
|||
|
|
@NoIndex MOVEQ #noIndexErr,D0 ; timed out waiting for index
|
|||
|
|
|
|||
|
|
@IndexDone BRA DskRtn ; set CCR and return
|
|||
|
|
|
|||
|
|
|
|||
|
|
|
|||
|
|
;__________________________________________________________________________________________________
|
|||
|
|
;
|
|||
|
|
; Routine: RawRead
|
|||
|
|
;
|
|||
|
|
; Inputs: A5 -- pointer to 6522 A-reg (has head sel, wait/req)
|
|||
|
|
; A6 -- pointer to SCC channel A data register
|
|||
|
|
;
|
|||
|
|
; Outputs: D0 -- result code
|
|||
|
|
;
|
|||
|
|
; Trashes: D1-D3,A0-A4 (all other registers are preserved)
|
|||
|
|
;
|
|||
|
|
; Function: reads data bytes into data buffer and clock bytes into clockBuffer
|
|||
|
|
;__________________________________________________________________________________________________
|
|||
|
|
|
|||
|
|
RawRead BSR GetDrv1 ; setup A1,D1
|
|||
|
|
MOVEQ #RdDtaAdr,D0 ; assume we want side 0
|
|||
|
|
BTST #3,SideTrack(A1) ; is it?
|
|||
|
|
BEQ.S @SelectSide ; -> yes
|
|||
|
|
MOVEQ #RdDta1Adr,D0 ; use the side 1 address
|
|||
|
|
@SelectSide BSR AdrDisk ; select the head
|
|||
|
|
|
|||
|
|
MOVEA.L rtdParams(A1),A4 ; point to our parameters:
|
|||
|
|
MOVEA.L (A4)+,A2 ; clockBuffer
|
|||
|
|
MOVEA.L (A4)+,A0 ; dataBuffer
|
|||
|
|
MOVE.L (A4)+,D0 ; byteCount
|
|||
|
|
|
|||
|
|
TST.B mfmDisk(A1,D1) ; is this an MFM disk? <SM1>
|
|||
|
|
BMI.W ReadMFM ; -> yes, go read it <SM1>
|
|||
|
|
CMP.B #-2,isSWIM(A1) ; do we have a SWIM2? <SM1>
|
|||
|
|
BEQ.W ISMReadGCR ; -> yes, read gcr the ISM way <SM1>
|
|||
|
|
BRA.S ReadGCR ; no, read GCR the old fashioned way <SM1>
|
|||
|
|
|
|||
|
|
|
|||
|
|
;__________________________________________________________________________________________________
|
|||
|
|
;
|
|||
|
|
; Routine: ReadMFM
|
|||
|
|
;
|
|||
|
|
; Inputs: D0 -- number of bytes to read
|
|||
|
|
; D1 -- offset to drive-specific variables
|
|||
|
|
; A0 -- pointer to dataBuffer
|
|||
|
|
; A1 -- pointer to driver's variables
|
|||
|
|
; A2 -- pointer to clockBuffer
|
|||
|
|
; A5 -- pointer to 6522 A-reg (has head sel, wait/req)
|
|||
|
|
; A6 -- pointer to SCC channel A data register
|
|||
|
|
;
|
|||
|
|
; Outputs: D0 -- result code
|
|||
|
|
;
|
|||
|
|
; Trashes: D1-D3,A0,A2-A4 (all other registers are preserved)
|
|||
|
|
;
|
|||
|
|
; Function: reads raw data starting with the next mark byte after a sync field
|
|||
|
|
;__________________________________________________________________________________________________
|
|||
|
|
|
|||
|
|
ReadMFM MOVE.L (SP)+,DskRtnAdr ; save the return address
|
|||
|
|
|
|||
|
|
MOVEA.L IWM,A4
|
|||
|
|
LEA rHandshake(A4),A3 ; point to the handshake and mark registers for speed
|
|||
|
|
LEA rMark(A4),A4
|
|||
|
|
|
|||
|
|
TST.B rError-rMark(A4) ; clear the error register
|
|||
|
|
MOVE.B #$18,wZeroes-rMark(A4) ; clear the write and action bits
|
|||
|
|
MOVE.B #$01,wOnes-rMark(A4) ; toggle the clFIFO bit to clear out
|
|||
|
|
MOVE.B #$01,wZeroes-rMark(A4) ; any data in the FIFO
|
|||
|
|
TST.B rError-rMark(A4) ; clear the error register again for grins
|
|||
|
|
MOVE.B #$08,wOnes-rMark(A4) ; turn on the action bit: GO!
|
|||
|
|
|
|||
|
|
MOVEQ #-1,D2 ; initial timeout counter (needs to be tuned)
|
|||
|
|
BRA.S @StartRead
|
|||
|
|
|
|||
|
|
@Wait4Byte _PollSCC ; poll the SCC modem port <H4>
|
|||
|
|
|
|||
|
|
@NoSCCData TST.B (A3) ; wait for a byte <H9>
|
|||
|
|
DBMI D2,@Wait4Byte
|
|||
|
|
BPL.S RawReadTOErr ;-> timeout <SM1>
|
|||
|
|
MOVE.B (A3),D3 ;Get the handshake register with valid bits <SM1>
|
|||
|
|
MOVEQ #mByteTOCnt,D2 ; reset the timeout counter for the next byte <SM1>
|
|||
|
|
|
|||
|
|
MOVE.B (A4),(A0)+ ; read the current byte into dataBuffer
|
|||
|
|
|
|||
|
|
LSR.B #1,D3 ; bit 0 is the mark bit
|
|||
|
|
ADDX.B D1,D1 ; shift it into bit 0 to acculumate it
|
|||
|
|
BCC.S @NextByte
|
|||
|
|
MOVE.B D1,(A2)+ ; we've grabbed 8 bits, so stuff them into clockBuffer
|
|||
|
|
@StartRead MOVEQ #1,D1 ; initialize the "bits" register (8 shifts will set C=1)
|
|||
|
|
|
|||
|
|
@NextByte SUBQ.L #1,D0 ; decrement the byte count
|
|||
|
|
BGE.S @Wait4Byte ; -> more left to do
|
|||
|
|
|
|||
|
|
CMPI.B #1,D1 ; is the last clockBits byte partially filled?
|
|||
|
|
BEQ.S @ReadOK
|
|||
|
|
@AlignBits ADD.B D1,D1 ; no, shift the bits so they start at bit 7 down
|
|||
|
|
BCC.S @AlignBits
|
|||
|
|
MOVE.B D1,(A2)+
|
|||
|
|
|
|||
|
|
@ReadOK MOVEQ #NoErr,D0
|
|||
|
|
|
|||
|
|
RawReadExit MOVE.B #$18,wZeroes-rMark(A4) ; clear the write and action bits to turn everything off
|
|||
|
|
BRA DskRtn ; set CCR and return
|
|||
|
|
|
|||
|
|
RawReadTOErr
|
|||
|
|
MOVEQ #dataTOErr,D0 ; timed out waiting for a byte
|
|||
|
|
BRA.S RawReadExit
|
|||
|
|
|
|||
|
|
|
|||
|
|
;__________________________________________________________________________________________________
|
|||
|
|
;
|
|||
|
|
; Routine: ReadGCR
|
|||
|
|
;
|
|||
|
|
; Inputs: D0 -- number of bytes to read
|
|||
|
|
; D1 -- offset to drive-specific variables
|
|||
|
|
; A0 -- pointer to dataBuffer
|
|||
|
|
; A1 -- pointer to driver's variables
|
|||
|
|
; A2 -- pointer to clockBuffer (not used)
|
|||
|
|
; A5 -- pointer to 6522 A-reg (has head sel, wait/req)
|
|||
|
|
; A6 -- pointer to SCC channel A data register
|
|||
|
|
;
|
|||
|
|
; Outputs: D0 -- result code
|
|||
|
|
;
|
|||
|
|
; Trashes: D1-D2,A0,A4 (all other registers are preserved)
|
|||
|
|
;
|
|||
|
|
; Function: reads raw data as soon as possible
|
|||
|
|
;__________________________________________________________________________________________________
|
|||
|
|
|
|||
|
|
ReadGCR MOVE.L (SP)+,DskRtnAdr ; save the return address
|
|||
|
|
|
|||
|
|
MOVEA.L IWM,A4 ; point to the data register for speed
|
|||
|
|
LEA q6L(A4),A4
|
|||
|
|
|
|||
|
|
MOVEQ #-1,D2 ; initial timeout counter (needs to be tuned)
|
|||
|
|
BRA.S @StartRead
|
|||
|
|
|
|||
|
|
@Wait4Byte _PollSCC ; poll the SCC modem port <H4>
|
|||
|
|
|
|||
|
|
@NoSCCData MOVE.B (A4),D1 ; wait for a byte
|
|||
|
|
DBMI D2,@Wait4Byte
|
|||
|
|
BPL.S @ReadTOErr ; -> timed out
|
|||
|
|
|
|||
|
|
MOVE.B D1,(A0)+ ; put the current byte into dataBuffer
|
|||
|
|
|
|||
|
|
MOVEQ #mByteTOCnt,D2 ; reset the timeout counter for the next byte
|
|||
|
|
|
|||
|
|
@StartRead SUBQ.L #1,D0 ; decrement the byte count
|
|||
|
|
BGE.S @Wait4Byte ; -> more left to do
|
|||
|
|
MOVEQ #NoErr,D0
|
|||
|
|
|
|||
|
|
@ReadExit BRA DskRtn ; set CCR and return
|
|||
|
|
|
|||
|
|
@ReadTOErr MOVEQ #dataTOErr,D0 ; timed out waiting for a byte
|
|||
|
|
BRA.S @ReadExit
|
|||
|
|
|
|||
|
|
;<3B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <SM1> begin
|
|||
|
|
;
|
|||
|
|
; Routine: ISMReadGCR
|
|||
|
|
;
|
|||
|
|
; Inputs: D0 -- number of bytes to read
|
|||
|
|
; D1 -- offset to drive-specific variables
|
|||
|
|
; A0 -- pointer to dataBuffer
|
|||
|
|
; A1 -- pointer to driver's variables
|
|||
|
|
; A2 -- pointer to clockBuffer
|
|||
|
|
; A5 -- pointer to 6522 A-reg (has head sel, wait/req)
|
|||
|
|
; A6 -- pointer to SCC channel A data register
|
|||
|
|
;
|
|||
|
|
; Outputs: D0 -- result code
|
|||
|
|
;
|
|||
|
|
; Trashes: D1-D3,A0,A2-A4 (all other registers are preserved)
|
|||
|
|
;
|
|||
|
|
; Function: reads raw data starting with the next mark byte after a sync field
|
|||
|
|
;<3B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
|||
|
|
|
|||
|
|
ISMReadGCR MOVE.L (SP)+,DskRtnAdr ; save the return address
|
|||
|
|
|
|||
|
|
MOVEA.L IWM,A4
|
|||
|
|
LEA rHandshake(A4),A3 ; point to the handshake and mark registers for speed
|
|||
|
|
LEA rMark(A4),A4
|
|||
|
|
|
|||
|
|
TST.B rError-rMark(A4) ; clear the error register
|
|||
|
|
MOVE.B #$18,wZeroes-rMark(A4) ; clear the write and action bits
|
|||
|
|
MOVE.B #$01,wOnes-rMark(A4) ; toggle the clFIFO bit to clear out
|
|||
|
|
MOVE.B #$01,wZeroes-rMark(A4) ; any data in the FIFO
|
|||
|
|
TST.B rError-rMark(A4) ; clear the error register again for grins
|
|||
|
|
MOVE.B #$08,wOnes-rMark(A4) ; turn on the action bit: GO!
|
|||
|
|
|
|||
|
|
MOVEQ #-1,D2 ; initial timeout counter (needs to be tuned)
|
|||
|
|
BRA.S @StartRead
|
|||
|
|
|
|||
|
|
@Wait4Byte _PollSCC ; poll the SCC modem port <H4>
|
|||
|
|
|
|||
|
|
TST.B (A3) ; wait for a byte
|
|||
|
|
DBMI D2,@Wait4Byte
|
|||
|
|
BPL.S @ReadTOErr ; -> timed out
|
|||
|
|
|
|||
|
|
MOVEQ #mByteTOCnt,D2 ; reset the timeout counter for the next byte
|
|||
|
|
|
|||
|
|
MOVE.B (A4),(A0)+ ; read the current byte into dataBuffer
|
|||
|
|
|
|||
|
|
@StartRead SUBQ.L #1,D0 ; decrement the byte count
|
|||
|
|
BGE.S @Wait4Byte ; -> more left to do
|
|||
|
|
|
|||
|
|
MOVEQ #NoErr,D0
|
|||
|
|
@ReadExit MOVE.B #$18,wZeroes-rMark(A4) ; clear the write and action bits to turn everything off
|
|||
|
|
BRA DskRtn ; set CCR and return
|
|||
|
|
|
|||
|
|
@ReadTOErr MOVEQ #dataTOErr,D0 ; timed out waiting for a byte
|
|||
|
|
BRA.S @ReadExit ; <SM1> end
|
|||
|
|
|
|||
|
|
|
|||
|
|
|