; ; File: TFSRFN1.a ; ; Contains: This file contains routines using refnums. ; ; Copyright: © 1982-1993 by Apple Computer, Inc., all rights reserved. ; ; Change History (most recent first): ; ; 8/27/93 BH Removed . The flushing stuff is now in CmdDone. ; 8/3/93 BH Flushing critical volume info when changed for a volume in a ; manual-eject drive. ; 10/26/92 CSS We now flush on chip caches after we do a read and before we ; do a write. Also, make a short branch into a word branch. ; 5/21/92 kc Append "Trap" to the names of GetFPosTrap and SetFPosTrap to ; avoid name conflict with the glue. ; 4/1/92 kc Checked in from Reality. ; ¥ Pre-SuperMario comments follow ¥ ; <2> 9/12/91 JSM Add a header. ; <1.4> 4/13/89 DNF Vectored FileRead and FileWrite. ; <1.3> 3/2/89 DNF removed references to forROM; HFS now builds identically for ram ; or rom ; <1.2> 11/21/88 CCH Replaced references to forRAM with ÒNOT forROM.Ó ; <1.1> 11/10/88 CCH Fixed Header. ; <1.0> 11/9/88 CCH Adding to EASE. ; <1.0> 2/11/88 BBM Adding file for the first time into EASEÉ ; 1/22/86 LAK Set CacheFlag before FlushCache call for read-verify flush. ; 1/14/86 LAK TFSBitTst doesn't trash D0 as before (needed for FileAlloc ; change). ; 10/8/85 LAK Fixed bug in DoPart for ROM (vectoring to BlockMove kills D1). ; 10/1/85 LAK Added label for TFSVCBTst. Rewrote to call cache for all I/O. ; Write no longer prefetches when extending the file. Read-verify ; calls cause the file fork to be flushed and blocks to be read ; read from disk rather than the cache. ; 9/21/85 LAK Changed for new TrashBlocks interface. ; 9/18/85 LAK Call TrashBlocks with D2=last block number, not last block+1. ; 9/8/85 LAK Slight modification to read code so it doesn't use FSTemp4. ; 9/6/85 LAK Tag data bug for Write-in-place fixed. MyRWSub uses longword D3 ; for start disk block for TFS volumes (for > 32MB volumes). ; 9/2/85 LAK Release cache buffer immediately after read (read-verify error ; path wasn't releasing the buffer). Use MarkBlock to dirty buffer ; for TFS write . . . ; 8/31/85 LAK Removed TFS support of OwnBuf buffers . . . removed Pat's debug ; code. ; 8/19/85 PWD Tempered enthusiam displayed above to save only between calls to ; MyRWSub0 and GetRegs, NEVER AFTER GetRegs. ; 8/15/85 PWD Added code to save A6 before ,ASYNC calls ; 2/25/85 GJC new today ; 6/27/84 GSS Put in line the WrPart patch from MSFileFix ; 8/30/83 LAK Removed redundant set of FCB dirty bit in FileWrite (gets set by ; AdjEOF). ; 8/15/83 LAK Flushes file buffer now if block is dirty and falls within ; read-in-place . . . saved some bytes, too. ; 8/11/83 LAK Added support for a read-verify mode. ; 8/2/83 LAK Fixed read bug (read count 0 with position past EOF). Changed ; file positioning mode 2 (relative to end of file) by defining ; IOPosOffset to be either positive or negative . . . ; 6/2/83 LAK Changes for FCBBfAdr=0 meaning use volume buffer. ; 2/10/83 LAK Fixed bugs in Read with EOL character. ; 2/9/83 LAK Fixed MyWriteIP bug (now invalidates file's buffer if it happens ; to write that block . . .) ; 1/17/83 LAK Latest changes for final structures. Brought SetFPos and GetFPos ; here from FSRFN2. Made GetFPos and SetFPos call FileRead with ; zero bytes requested. ; 12/14/82 LAK Rewrote for new file system data structures. ; ;_______________________________________________________________________ ; ; External Routines: FileRead,FileWrite,SetFPos,GetFPos ; ; Internal Routines: MyWrite,Seek,CVFlgs,MyReadBk,MyReadDB,MyReadIP ; ;_______________________________________________________________________ ;_______________________________________________________________________ ; ; Routines TFSBitTst, TFSVolTst, TFSVCBTst ; Arguments A0.L (input) -- pointer to I/O parameter block ; D0 (output) -- status ; Calls GetVCBRfn ; Called by Create ; Function determines whether or not the volume is TFS format ; (TFSVolTst) and whether or not TFS params are defined ; for this call (TFSBitTst). ; ; Modification History: ; ; 25-Feb-85 GJC new today ;_______________________________________________________________________ BLANKS ON STRING ASIS TFSBitTst BTST #HFSBit,IOtrap(A0) ; test TFS bit <14Jan86> RTS ; on return, status .ne. means TFS TFSVolTst MOVEA.L FCBVPtr(A1,D1.w),A2 TFSVCBTst CMPI.W #Tsigword,VCBSigWord(A2) ; is sigword that of TFS? <01Oct85> RTS ; on return, status .eq. TFS vol ; ;_______________________________________________________________________ ; ; Routine: Seek ; Arguments: A0.L (input) -- I/O parameter block pointer, uses: IOPosMode, ; IOPosOffset ; (A1,D1) (input) -- FCB ptr for the file in question ; D0.W (output) -- error code ; D2.W (output) -- distance past EOF (0 or - if not past EOF) ; D5.L (output) -- current file position ; D7.L (output) -- set to IOReqCount ; IOActCount cleared ; trashes D4 ; Called By: FileRead,FileWrite ; Function: Seek is a utility routine that interprets the positioning ; parameters in an read or write call, updating the current ; file position in the FCB. ; ; There are 4 positioning modes: ; ; mode 0 -> no positioning ; mode 1 -> relative to beginning (absolute) ; mode 2 -> relative to end of file ; mode 3 -> relative to current ; ; If the file positioning would cause the current position to ; become negative, it is not changed and an error ; (PosErr) is returned; otherwise, result code 0 ; returned. Read and Write must check for positioning past ; current EOF since they handle that case differently (read ; reports an error, write extends the file). This routine will ; clip the position to the end-of-file but returns a remainder ; in D2. ; ; The IOReqCount field must be positive; IOPosOffset may be ; positive or negative . . . ; ; Modification History: ; 14 Dec 82 LAK Rewrote to reflect new file system data structures. Changed ; to handle positioning past end-of-file differently, reports ; error when positioning to before file start. ; 15 Aug 83 LAK Now trashes D4 and passes back file position in D5. ; ; USoft memo Aug 10: A read with position past end of file should return an ; error; a write should allocate space on the disk up to the specified ; position. Read and write should return the current file position in the ; in the parameter block after reads and writes regardless of positioning mode. ; ;_______________________________________________________________________ Seek CLR.L IOActCount(A0) ; haven't actually done any bytes yet. MOVEQ #ParamErr,D0 ; assume bad count MOVE.L IOReqCount(A0),D7 ; # bytes to read/write BMI.S SkExitRTS ; exit with error if negative MOVE.L IOPosOffset(A0),D2 ; position value the user supplied MOVE.L FCBCrPs(A1,D1),D5 ; current file position MOVE.L FCBEOF(A1,D1),D4 ; get the current EOF MOVE.B IOPosMode+1(A0),D0 ; the position mode is in bits 0,1 ROXR.B #2,D0 ; get position bits in carry, sign BCC.S PM01 ; br if 0 or 1 BMI.S PM3 ; br if 3 ; relative to the end of the file (mode 2) MOVE.L D4,D5 ; current EOF ; relative to current position (mode 3) PM3 ADD.L D2,D5 BRA.S SkExit PM01 BPL.S SkExit ; br if no position operation (mode 0) ; relative to start (mode 1) MOVE.L D2,D5 ; relative to start is absolute SkExit BPL.S @1 ; did D5 go negative? br if not MOVEQ #PosErr,D0 ; report positioning error BRA.S SkExitRTS ; and don't change current position @1 MOVE.L D5,D2 ; new position SUB.L D4,D2 ; distance past end of file (pos-EOF) BLE.S @2 ; br if not past the end MOVE.L D4,D5 ; pin to EOF @2 MOVE.L D5,FCBCrPs(A1,D1) ; set the new current position MOVEQ #0,D0 ; no error SkExitRTS RTS ;_______________________________________________________________________ ; ; Routine: GetFPos ; ; (c) 1983 Apple Computer, Inc. ; ; Arguments: A0.L (input) -- pointer to I/O parameter block; uses: ; IORefNum,IOPosOffset ; D0.W (output) -- 0 if file was found, error code otherwise. ; Calls: ; Function: Get current file position for specified opened file ; ; Modification History: ; 10 Dec 82 LAK Modified for new file system data structures. ; 17 Jan 83 LAK Modified to call FileRead via SetFPos to do the work. ; ;_______________________________________________________________________ GetFPosTrap: CLR.B IOPosMode+1(A0) ; no file positioning ; Fall thru to SetFPos ;_______________________________________________________________________ ; ; Routine: SetFPos ; ; (c) 1983 Apple Computer, Inc. ; ; Arguments: A0.L (input) -- pointer to I/O parameter block; uses: ; IORefNum,IOPosOffset ; D0.W (output) -- 0 if file was found, error code otherwise. ; Calls: ; Function: Set current file position for specified opened file. Will ; not set the position past end of file. Uses positioning modes ; like FileRead. ; ; Modification History: ; 10 Dec 82 LAK New Today. ; 17 Jan 83 LAK Modified to call fileread. ; ;_______________________________________________________________________ SetFPosTrap: CLR.L IOReqCount(A0) ; no bytes ; fall thru to FileRead ;_______________________________________________________________________ ; ; Routine: FileRead ; Arguments: A0.L (input) -- I/O parameter block pointer, uses: IORefnum, ; IOBuffer,IOReqCount,IOActCount,IOPosMode,IOPosOffset ; D0.W (output) -- error code ; Calls: FSQueue,RFnCall,Seek,Lg2Phys,MyRead,CmdDone ; Function: General purpose file read call. ; ; Modification History: ; 15 Dec 82 LAK Rewrote to reflect new file system data structures; ; Separated reading with EOL mode from regular reading (now ; checks for EOL character whenever specified). ; ; 11 Mar 85 GJC Added modifications so FileRead can handle the caching scheme ; Used by TFS ; 16 May 85 PWD Set up options on FlushCache call. ; ; IOPosMode(A0).W = Newline char in bits 8-15, newline flag (1=enabled) in ; bit 7, bits 0-1 are position information ; ; ; - if positions to EOF and 0 bytes are requested, EOF is not reported. ; (reading exactly to EOF will not raise EOF condition unless byte count ; is not satisfied because EOF hit) ;_______________________________________________________________________ IMPORT CacheFlush ; CSS FileRead: MOVE.L jFileRead,-(SP) ; jumptable entry for vFileRead RTS ; go there vFileRead: ; 'vectored' FileRead routine BSR FSQueue ; wait our turn BSR RFnCall ; map the reference number BNE FRdExit1 ; exit on errors (don't set IOPosOffset) ; (also exit for offline, ext fs calls) BSR.S Seek ; do any positioning - D5 gets cur pos, ; IOActCount cleared, D7 set to ; IOReqCount BNE.S FRdExit0 ; exit if positioned to before file start ; figure min(requested count,distance to EOF) NEG.L D2 ; EOF-current pos (from seek) BMI.S FRdEOFXit ; if negative, report end of file CMP.L D2,D7 ; number of bytes desired within EOF? BLE.S @1 ; br if so MOVE.L D2,D7 ; just read distance to EOF @1 TST.L D7 ; byte count 0? BEQ.S FRdOK ; all done if none to read! MOVE.W IOPosMode(A0),D2 ; get newline stuff LSR.W #8,D2 ; newline char in low byte, enb in carry BCS FRNewLine ; if newline enabled, do it differently CSS BTST #6,IOPosMode+1(A0) ; read verify? <01Oct85> BEQ.S @2 ; br if not <01Oct85> MOVEM.L A1/D1,-(A6) ; save A1/D1 across FlushCache call <01Oct85> MOVE.W D1,D0 ; set up to make a flushcache for the file <01Oct85> MOVEQ #0,D1 ; just normal call . . . <01Oct85> MOVEA.L VCBBufAdr(A2),A1 ; point to volume buffer <01Oct85> ST CacheFlag ; make sure we flush <22Jan86> JSR FlushCache ; write all file blocks before read-verify <01Oct85> MOVEM.L (A6)+,A1/D1 ; and trash so we actually read them <01Oct85> @2 MOVE.W D5,D2 ; current file position (low word) <01Oct85> AND.W #$01FF,D2 ; check lower 9 bits for blk bndry read BEQ.S RDMain ; br if so (see if we can read into place) ; must read a funny amount of data (not a full block's worth) RdPart BSR RdFileBlk ; read the data (asynchronously) <01Oct85> BNE.S FRdExit ; exit on errors ; the data block is at (A5). Move it into user buffer byte by byte. BTST #6,IOPosMode+1(A0) ; read verify only? SNE D0 ; $00 if not, $FF if so BSR DoPart ; share code with similar write code BNE.S FRdExit ; exit on verify errors ; read multiple blocks into place in user's buffer RdMain MOVE.L D7,D4 ; number of bytes we want. BEQ.S FRdOK ; all done if no more bytes. AND.W #$FE00,D4 ; only read whole blocks (pass D4=max bytes to read) TST.L D4 ; any whole blocks to read? BEQ.S RdPart ; br if not . . . JSR CacheRdIP ; pass: A2=VCB ptr,(A1,D1.W)=FCB pointer ; D5.L=cur file pos, D4.L=max bytes to read ; A0=IO Param Blk ptr ; returns: D6=bytes read, D0=result code BNE.S FRdExit ; disk errors deserve an exit BSR UpdteCntPos ; using D6, update D7, D5, and IOActCount(A0) BRA.s RdMain ; loop. FRdOK MOVEQ #0,D0 ; no errors (except maybe EOF) FRdExit TST.W D0 ; other error? BNE.S FRdExit0 ; br if so MOVE.L IOActCount(A0),D2 ; if actual count is not equal to CMP.L IOReqCount(A0),D2 ; requested count, and no other errors, BEQ.S FRdExit0 ; (br if not true) FRdEOFXit MOVEQ #EOFErr,D0 ; then we must have hit end of file . . . FRdExit0 MOVE.L D5,FCBCrPs(A1,D1) ; update current position in FCB MOVE.L D5,IOPosOffset(A0) ; always return current pos FRdExit1 BSR.L CacheFlush ; CSS BRA CmdDone ; bye now . . . ; reading while looking for end of line characters . . . do it a block at a time FRNewLine BSR.S RdFileBlk ; read the data (asynchronously) <01Oct85> BNE.S FRdExit ; exit on errors ; the data block is at (A5). Move it into user buffer byte by byte. @5 MOVE.L D5,D2 ; current file position AND.W #$01FF,D2 ; get the index MOVE.L IOBuffer(A0),A3 ; user buffer MOVE.L IOActCount(A0),D4 ; where to start continuing read @10 MOVE.B 0(A5,D2.W),D0 ; get byte from the buffer MOVE.B D0,0(A3,D4.L) ; put it into user's area ADDQ.L #1,IOActCount(A0) ; actually read another byte! ADDQ.L #1,D4 ; incr destination byte offset ADDQ.W #1,D2 ; incr source byte offset ADDQ.L #1,D5 ; incr current position CMP.B IOPosMode(A0),D0 ; is it the EOL character? BNE.S @20 MOVEQ #0,D0 ; no error, we found EOL! BRA.S FRdExit0 @20 SUBQ.L #1,D7 ; decr byte count BEQ.S FRdOK ; exit, checking for EOF condition CMP.W D6,D2 ; reached end of buffer? BCS.S @10 ; loop if not BRA.S FRNewLine ; get another block ;_______________________________________________________________________ ; ; Routine: RdFileBlk, PreRdFileBlk ; Arguments: A0.L (in ) -- I/O Param Blk Ptr (RdFileBlk) ; A2.L (in ) -- VCB ptr ; D5.L (in ) -- file position to read block from ; D0.W (out) -- error code ; D6.L (out) -- const 512 (byte count) ; A5.L (out) -- buffer pointer ; A6.L -- TFS stack pointer ; Clobbers: ; All other registers are preserved ; This routine returns to one level above caller during the ; read(caller must not have anything on the stack when ; issuing the call!) ; Called By: FileRead,FileWrite ; Function: Calls cache routines GetBlock and RelBlock to get a block ; of the file. ; ; ; Modification History: ; <01Oct85> LAK New today. Built from old MyReadBk. ;_______________________________________________________________________ PreRdFileBlk BSR.S ReadBlock CMP.L D3,D5 ; read position >= old LEOF rounded? <01Oct85> BCS.S RdFileB1 ; br if not <01Oct85> MOVEQ #kGBNoRead,D1 ; don't bother to read it then <01Oct85> BRA.S RdFileB1 ; <01Oct85> RdFileBlk BSR.S ReadBlock ; BTST #6,IOPosMode+1(A0) ; read verify? <01Oct85> BEQ.S RdFileB1 ; br if not <01Oct85> MOVEQ #kGBRead,D1 ; always read it if so <01Oct85> RdFileB1 MOVEA.L VCBBufAdr(A2),A1 ; Use a TFS volume cache buffer <01Oct85> MOVE.L D5,D2 ; Byte position <01Oct85> LSR.L #8,D2 ; 'Divide' by 256 <01Oct85> LSR.L #1,D2 ; by 512 to get long file block # <01Oct85> RTS ; return to ReadBlock <01Oct85> ; Called by: MFSDirRead, MFSMapRead, RdFileBlk ReadBlock MOVEM.L A0-A1/D1-D2,-(A6) ; save status <01Oct85> MOVE.L (SP)+,A1 ; 'set up routine' address <01Oct85> MOVE.L (SP)+,-(A6) ; Save return address <01Oct85> MOVE.W D1,D0 ; file refnum MOVEQ #0,D1 ; flag <01Oct85> MOVEQ #2,D6 ; always return D6=512 for historical <01Oct85> LSL.L #8,D6 ; reasons . . . <01Oct85> JSR (A1) ; fill in A1=Cache Ptr, D2.L=block num, <01Oct85> ; D0.W=refnum (file or volume). <01Oct85> ADDQ.B #kGBrelease,D1 ; immediate release <01Oct85> JSR GetBlock ; get the cache buffer <01Oct85> MOVEA.L A0,A5 ; return A5->released buffer MOVE.L (A6)+,-(SP) ; pop ret address off TFS stack MOVEM.L (A6)+,A0-A1/D1-D2 ; restore status TST.W D0 ; any errors? RTS ; return to caller with error code ;_______________________________________________________________________ ; ; Routine: FileWrite ; Arguments: A0.L (input) -- I/O parameter block pointer, uses: IORefnum, ; IOBuffer,IOReqCount,IOActCount,IOPosMode,IOPosOffset ; D0.W (output) -- error code ; Calls: FSQueue,TstMod,RFnCall,Seek,Lg2Phys,MyWriteIP,MyWriteDB,CmdDone ; Function: Write user data to a file, extending the file as necessary. ; ; Modification History: ; 17 Dec 82 LAK Rewrote to reflect new file system data structures; ; When file is initially positioned past end-of-file, the ; file is automatically extended enough for the write. ; ;_______________________________________________________________________ IMPORT CacheFlush ; CSS FileWrite: MOVE.L jFileWrite,-(SP) ; jumptable entry for vFileWrite RTS ; go there vFileWrite: ; 'vectored' FileWrite routine BSR.L CacheFlush ; flush the chip caches so data is in memory. CSS BSR FSQueue ; don't do the call until time. BSR TstMod ; test if we may modify this file. BNE.S FWrExit1 ; br if not. BSR Seek ; share this routine with read - D5 gets ; cur file position, IOActCount cleared, ; D7 set to IOReqCount BNE.S @2 ; br if tried to position before start ; (to FWrExit0) TST.L D2 ; positioned past EOF? BMI.S @1 ; br if not ADD.L D2,D5 ; extend added to cur pos ; set up D3 so PreRdFileBlk can tell when a block actually has to be read @1 MOVE.L #511,D3 ; <01Oct85> ADD.L D4,D3 ; add current LEOF from Seek <01Oct85> AND.W #$FE00,D3 ; LEOF rounded to next block boundary <01Oct85> ; see if file has to be made physically longer MOVE.L D5,D4 ; current position after positioning ADD.L D7,D4 ; end byte for write + 1 CMP.L FCBEOF(A1,D1),D4 ; will it fit within the old EOF? BLS.S SameLen ; if so, leave file at same phys length SUB.L FCBPLen(A1,D1),D4 ; is it past the phys end? BLS.S @3 ; no, just reset the eof ; ran off the physical end of the file--need to allocate more blocks ; Call alloc with D4=number of extra bytes we need, A2=addr of VCB, ; (A1,D1) ptr to FCB . . . BSR Alloc ; do it to it (sets FCB PEOF, start blk) @2 BNE.S FWrExit0 ; exit if didn't get it (return with ; cur file pos = EOF) ; now just update the logical len. @3 MOVE.L D5,D4 ; current position after positioning ADD.L D7,D4 ; plus # bytes to write MOVE.L D4,FCBEOF(A1,D1) ; is new logical end-of-file ; the data will fit into the file. At this point: ; A0=ptr to params, ; (A1,D1) = ptr to file's FCB ; A2 = ptr to VCB ; D7 = # bytes to write total ; D5 = current file position. SameLen MOVE.W D5,D0 ; check if writing to a block boundary AND.W #$01FF,D0 ; if so, low 9 bits will be 0 BEQ.S WrMain ; if so, try writing full blocks out ; must write some funny amount of data WrPart BSR PreRdFileBlk ; get the appropriate block <01Oct85> BNE.S FWrExit ; just skip if bad read ; the destination data block is at (A5). Move it out of user buffer byte by byte. MOVEQ #1,D0 ; D0=1 for write BSR.S DoPart ; share code with fileread JSR MarkA5Block ; mark the block dirty <01Oct85> ; This section tries to write out entire blocks and/or groups of blocks WrMain MOVE.L D7,D4 ; number bytes we want. BEQ.S FWrOK ; all done if no more bytes. AND.W #$FE00,D4 ; only write whole blocks TST.L D4 ; must want at least 512 bytes BEQ.S WrPart ; br if not . . . JSR CacheWrIP ; pass: A2=VCB ptr,(A1,D1.W)=FCB pointer ; D5.L=cur file pos, D4.L=max bytes to read ; A0=IO param blk ptr ; returns: D6=bytes read, D0=result code BNE.S FWrExit ; disk errors deserve an exit BSR.S UpdteCntPos BRA.S WrMain ; loop. FWrOK MOVEQ #0,D0 ; no errors FWrExit BSR AdjEOF ; adjust other FCBs for this file MOVE.L D5,FCBCrPs(A1,D1) ; update current position in FCB FWrExit0 MOVE.L FCBCrPs(A1,D1),IOPosOffset(A0) ; always return current pos FWrExit1 BRA CmdDone ; command is done. UpdteCntPos SUB.L D6,D7 ; adjust for number of bytes read ADD.L D6,IOActCount(A0) ; actually read this many more ADD.L D6,D5 ; update current position RTS ; code sharing routine . . . D6 = 512 on entry DoPart MOVE.L D5,D2 ; current file position AND.W #$01FF,D2 ; get the index SUB.W D2,D6 ; bytes in blk from cur pos CMP.L D6,D7 ; more than we want? BCC.S @1 MOVE.L D7,D6 ; if so, only r/w num requested @1 MOVE.L IOBuffer(A0),A3 ; user buffer ADD.L IOActCount(A0),A3 ; where to start continuing read/write BSR.S UpdteCntPos MOVEM.L D1/A0-A2,-(SP) ; preserve blockmove registers <08Oct85> MOVE.L A3,A0 ; src for writes MOVE.L A5,A1 ADD D2,A1 ; dest for writes TST.B D0 ; read or write? BGT.S @2 ; br for write BMI.S @5 ; br for read verify EXG A0,A1 ; switch src, dest for reads @2 MOVE.L D6,D0 ; byte count MOVE.L JBlockMove, A2 ; <01Oct85> JSR (A2) ; <01Oct85> @3 MOVEQ #0,D0 ; no errors @4 MOVEM.L (SP)+,D1/A0-A2 ; restore regs <08Oct85> RTS @5 MOVEQ #IOErr,D0 ; assume error SUBQ.W #1, D6 ; for DBNE loop <01Oct85> @6 CMPM.B (A0)+,(A1)+ ; compare next byte DBNE D6,@6 ; exit on errors or done <01Oct85> BNE.S @4 ; br if err <01Oct85> BRA.S @3 ; and take the good route if done