mirror of
https://github.com/marciot/mac-tip.git
synced 2024-09-28 11:54:42 +00:00
169 lines
5.3 KiB
C++
169 lines
5.3 KiB
C++
#include "tip.h"
|
|
|
|
const char *szWindowTitle = "TIP 2.1b -- Zip & Jaz Drive and Cartridge Testing System";
|
|
const char *szCopyright_1 = "Copyright (c) 2006 by";
|
|
const char *szCopyright_2 = "Gibson Research Corp.";
|
|
|
|
const char *szIomega = "IOMEGA";
|
|
const char *szZip = "ZIP";
|
|
const char *szJaz = "JAZ";
|
|
|
|
const char *szSide0 = "Side 0";
|
|
const char *szSide1 = "Side 1";
|
|
const char *szSpaceDashSpace = " - ";
|
|
|
|
const char *szBarChartPercent = " %ld%% ";
|
|
const char *szCenteredDecimal = "%ld";
|
|
const char *szCenteredHex = "ErrorCode: %06lX";
|
|
const char *szHoursMinsSecs = "%ld:%02ld:%02ld";
|
|
|
|
const char *szCartStatus = "Cartridge Status:";
|
|
const char *szEstimating = "Estimating ...";
|
|
const char *szOneMoment = "--- --- ---";
|
|
const char *szPressToStart = "Press to Begin";
|
|
const char *szPressToStop = "Press to Stop";
|
|
const char *szPressToSpin = "Press to Spin Up";
|
|
const char *szPressToEject = "Press to Eject";
|
|
const char *szPressToProceed = "Press to Proceed";
|
|
|
|
// Filenames
|
|
|
|
const char *szInstructions = "Instructions";
|
|
const char *szNoASPI = "No ASPI";
|
|
const char *szASPITrouble = "No Drives";
|
|
const char *szPPAVersion = "Parallel Port";
|
|
const char *szDefectList = "Z-Track Failure";
|
|
const char *szLocked = "Cartridge Locked";
|
|
const char *szNoSpares = "No Spares";
|
|
const char *szOutOfSpares = "Out of Spares";
|
|
const char *szFewSpares = "Few Spares";
|
|
const char *szNotRunning = "Not Running";
|
|
const char *szRunning = "Test Running";
|
|
const char *szInterrupted = "Test Interrupted";
|
|
const char *szPerfectResult = "Perfect Result";
|
|
const char *szExplainResult = "Good Result";
|
|
const char *szBadResult = "Bad Result";
|
|
const char *szIomegaQuote = "Iomega Quote";
|
|
|
|
/************* Cartridge Status Text *************/
|
|
|
|
const char *szUnknownStat = "Ejecting Cartridge";
|
|
const char *szAtSpeedStat = "Ready to Test";
|
|
const char *szSpinningUp = "Spinning Up";
|
|
const char *szNotPresent = "Awaiting Cartridge";
|
|
const char *szSpunDown = "Not Spinning";
|
|
const char *szStalledStat = "Stalled Error";
|
|
const char *szZtrackFailure = "Z-Tracks Failure !!";
|
|
const char *szDiskLocked = "Disk Protected";
|
|
const char *szLowSpares = "Low Spares Count";
|
|
const char *szTestUnderway = "Testing Drive ";
|
|
const char *DriveUnderTest = "X: ...";
|
|
const char *szTestFailure = "Testing Failed";
|
|
const char *szNoIomegaDrives = "No Iomega Drives";
|
|
|
|
const char *CartStatStrings[] = {
|
|
szUnknownStat, szAtSpeedStat, szSpinningUp,
|
|
szNotPresent, szSpunDown, szStalledStat,
|
|
szZtrackFailure, szDiskLocked, szLowSpares,
|
|
szTestUnderway, szTestFailure
|
|
};
|
|
|
|
ErrorTypeList errorTypeList[] = {
|
|
0x00000000, "-- None So Far --",
|
|
|
|
0x001C0000, "Missing Defect List",
|
|
|
|
0x000C0101, "Wrote with Realloc",
|
|
0x000C8001, "Wrote with Retries",
|
|
0x000C8101, "Wrote with Off Track",
|
|
0x000C8201, "Wrote w/o SectorMark",
|
|
0x000C8301, "Wrote with ID skip",
|
|
0x00170101, "Read with Retries",
|
|
0x00170601, "Retried & Realloc",
|
|
0x00180001, "Data Corrected",
|
|
0x00180101, "ECC & Retries",
|
|
0x00180201, "ECC & Realloc'd",
|
|
0x001C8F01, "Defect List Recvr'd",
|
|
|
|
0x00040002, "Drive Not Ready",
|
|
0x00040102, "Drive Going Ready",
|
|
0x00040202, "Drive Not Ready #2",
|
|
0x00040302, "Drive Needs Help",
|
|
0x00040402, "Not Rdy - Formating",
|
|
0x00300002, "Incompatible Media",
|
|
0x003A0002, "Media Not Present",
|
|
|
|
0x00010003, "Missing Sector Mark",
|
|
0x00030003, "Off Track Write",
|
|
0x00100003, "Bad ID Checksum",
|
|
0x00110003, "Unrecovered Read",
|
|
0x00118003, "Unrecovered Read",
|
|
0x00120003, "MissingID Sync",
|
|
0x00130003, "Missing Addr Mark",
|
|
0x00140003, "Sector Not Found",
|
|
0x00160003, "Sync Mark Missing",
|
|
0x001C0003, "Defect List Error",
|
|
0x00310003, "Corrupt Media Format",
|
|
0x00310103, "Format Command Fail",
|
|
// 0x0031xx03, " -- failures --"
|
|
0x00320003, "No Spare Sectors", // abort on this
|
|
0x00328F03, "No Spare Tracks", // abort on this
|
|
|
|
0x00018104, "Missing Sector Pulse",
|
|
0x00090004, "Track Follow Error",
|
|
0x00150004, "Head Seek Failure",
|
|
0x00220004, "Cartridge Sense Fail",
|
|
// 0x0040xx04, "Self Test Failed",
|
|
0x00470004, "Data Parity Error",
|
|
// 0x00xx0004, "Vendor Specific Error",
|
|
|
|
0x00290006, "I/O Bus Reset Error",
|
|
|
|
0x0088010B, "Reassigned Blk Err",
|
|
0x0088020B, "Side Switch Error",
|
|
0x00FFFFE6, "Buffer Too Big",
|
|
|
|
0xFFFFFFFF, "-- Unknown Error --",
|
|
|
|
0, 0
|
|
};
|
|
|
|
/****************** Control Text *****************/
|
|
|
|
const char *szBack = "< Back";
|
|
const char *szNext = "Next >";
|
|
const char *szQuit = "Exit";
|
|
|
|
/*******************************************************************************
|
|
* PERFORM_TEST_PAGE
|
|
*******************************************************************************/
|
|
|
|
TextList TestBlackText[] = {
|
|
{250, 2, "Data Read"},
|
|
{350, 2, "Patt Write"},
|
|
{250, 18, "Data Write"},
|
|
{350, 18, "Patt Read"},
|
|
{11, 39, "0%"},
|
|
{377, 39, "100%"},
|
|
{ 11, 77, "0"},
|
|
{377, 77, "100%"},
|
|
{ 22, 154, "Sectors"},
|
|
{ 10, 171, "Last Error"},
|
|
{ 17, 188, "Elapsed"},
|
|
{ 13, 205, "Time Left"},
|
|
{278, 154, "Soft Errors"},
|
|
{275, 171, "Firm Errors"},
|
|
{272, 188, "Hard Errors"},
|
|
{271, 205, "Total Errors"},
|
|
{0,0,0}
|
|
};
|
|
|
|
TextList TestGrayText[] = {
|
|
{155, 39, "Testing Progress"},
|
|
{129, 77, "Spare Sectors Consumed"},
|
|
{61, 135, "Testing Location"},
|
|
/*{219, 135, "Sound"},*/
|
|
{297, 135, "Error Summary"},
|
|
{0,0,0}
|
|
};
|