Macintosh-SW/supermario
1
0
Fork 0
mirror of https://github.com/elliotnunn/supermario.git synced 2024-11-29 20:49:19 +00:00
Code Issues Projects Releases Wiki Activity
ef56584a54
supermario/base/SuperMarioProj.1994-02-09/Drivers/EDisk/EDiskDriver.a

1767 lines
66 KiB
Plaintext
Raw Normal View History

Bring in sources, and document
2019-06-29 15:17:50 +00:00
;
; File: EDiskDrvr.a
;
; Contains: Electronic Disk Driver
;
; Written by: Gary G. Davidian
;
; Copyright: © 1988-1993 by Apple Computer, Inc., all rights reserved.
;
; Change History (most recent first):
;
; <SM7> 10/28/93 CCH Optimized read path to not disable writes on every call and
; disabled checksums on PDM.
; <SM6> 10/14/93 CCH Added write-protection support for PowerPC machines.
; <SM5> 4/15/93 chp Fix RADAR #1078337. Format csCode would crash given an invalid
; drive number. An error handler was branching to the wrong label.
; <SM4> 2/8/93 rab Sync up with Horror. Comments follow.
; <H6> 9/30/92 BG (for Dave Nelson) Added a patch to fix the problem of the driver
; not adjusting the usage count correctly if someone calls the
; driver with an invalid _Control call.
; <SM3> 8/31/92 PN Fix header
; <SM2> 8/31/92 PN First time this file is moved over from Horror so that RAMDisk
; works with Cyclone
; ———————————————————————————————————————————————————————————————————————————————————————
; SuperMario ROM comments start here.
; ———————————————————————————————————————————————————————————————————————————————————————
; <H3> 2/5/92 SWC Set bit 15 in the driveInfo for RAM disks so the Finder can have
; a way to determine that the media is volatile.
; <H2> 12/12/91 CCH Fixed Read-Verify bug in 24-bit mode.
; ———————————————————————————————————————————————————————————————————————————————————————
; Pre-HORROR ROM comments begin here.
; ———————————————————————————————————————————————————————————————————————————————————————
; <7> 6/30/91 CCH Updated icon.
; <6> 6/13/91 CCH Moved RamDiskSize to EDiskDriveInfo record and modified the way
; it is initialized.
; <5> 5/24/91 CCH Turned on write-protection of the EDisk's address space when not
; being accessed by the driver.
; <4> 3/19/91 CCH Modified to use seperate ram disk memory area set up by the MMU.
; <3> 2/25/91 CCH Removed redundant RAM test, changed to a jump vector for
; _SwapMMUMode, and preserved the result code in the verify
; routine. Also made modifications to keep RAM disk intact across
; memory-mode changes (24<->32).
; <2> 12/20/90 CCH Added changes to support 32-bit addressing.
; ———————————————————————————————————————————————————————————————————————————————————————
; Pre-TERROR ROM comments begin here.
; ———————————————————————————————————————————————————————————————————————————————————————
; <3> 5/16/90 JJ Modify to use only 1 byte of Pram.
; <2> 5/16/90 JJ Restructured to provide RAMDisk on Elsie and Erickson.
; {2} 2/6/90 GMR Fixed bug in Prime where it didn't update ioNumDone,
; dCtlPosition properly.
; {1.8} 8/16/89 BBM version 1.7 broke hcmac build by the addition of flag hasSlim.
; fixed same.
; {1.7} 8/16/89 BBM temporary hack to get edisks working on emacs.
; <1.6> 5/26/89 GMR Saves RAM disk size in new EDisk global in Open code, added new
; status call to retrieve it.
; <1.5> 4/25/89 GMR Let d6 accumulate MOD3 test results on each RAM test pass, since
; the MOD3 test OR's errors into d6. This fixes the format bug in
; version 1.4.
; <1.4> 4/11/89 GMR Tests RAM in 16K chunks, for better mouse movement.
; <1.3> 4/4/89 GMR Added new ICON's. Format now tests RAM in 64K chunks, so the
; mouse won't freeze on large RAM disks.
; <1.2> 2/21/89 GGD Added support for immediate calls, and KillIO. Made the Apple
; look better in SLIM Icon. Added support for new SLIM interface
; adapter.
; <1.1> 11/11/88 CCH Fixed Header.
; <1.0> 11/9/88 CCH Adding to EASE.
; <1.5> 11/2/88 GGD Added code to post events to drive some sort of user interface
; for the lack of an eject/locking mechanism (currently, and
; hopefully permanently, disabled). Added support for internal ROM
; Disks (untested). Removed drivers need to staticly know its
; driver refnum, no code needs to change if refnum needs to
; change. Storage is now only allocated for drives that exist.
; EDiskHeader format and signature changed. Probably lots of other
; improvements too.
; <1.3> 9/1/88 GGD Added official drive icons. Added partial support for ROM disks.
; Added DriveInfo support. Changed drive queue order and numbering
; to interface better with the Startup Device CDEV. Optimized a
; few routines. Deleted code associated with normandy work around.
; Deleted support for Non-Battery-Backed-Up SLIM EDisks. Added
; special RAM Disk format code to erase and delete from drive
; queue.
; <1.2> 8/5/88 MSH Cleared hardware workaround flag. New normandy necessary to use
; SLIMs.
; <1.1> 6/21/88 GGD Changed Internal EDisk size computation and space allocation to
; be in 64KB blocks ending at MemTop. Changed FormatVerify to
; check checksums if present, otherwise NoErr. Changed Format to
; call TestManager to test RAM.
; <1.0> 4/21/88 MSH New Today
;
; To Do:
;
;--------------------------------------------------------
;
;_______________________________________________________________________
;
; © Apple Computer, Inc. 1988,1989
;
; written by Gary G. Davidian 13-Mar-88
;
;_______________________________________________________________________
BLANKS ON
PRINT OFF
LOAD 'StandardEqu.d'
INCLUDE 'HardwareEqu.a'
INCLUDE 'MMUEqu.a'
INCLUDE 'BootEqu.a'
INCLUDE 'SonyEqu.a'
PRINT ON
INCLUDE 'EDiskEqu.a'
PRINT NOMDIR
MACHINE MC68020
NewEdiskProt EQU 1
_TestManager OPWORD $A06B
macro
assert &boolExpr
if not(&Eval(&boolExpr)) then
aerror &concat('Assertion Failed - ',&boolExpr)
endif
endm
title 'EDisk Driver - DRVR Header'
; Driver Header for Device Manager
EDiskDRVR PROC EXPORT
with EDiskVars,EDiskDriveInfo,StartGlobals,MMUConfigInfo
EDiskDRVRflags SET 0
EDiskDRVRflags SET EDiskDRVRflags!1<<dReadEnable
EDiskDRVRflags SET EDiskDRVRflags!1<<dWritEnable
EDiskDRVRflags SET EDiskDRVRflags!1<<dCtlEnable
EDiskDRVRflags SET EDiskDRVRflags!1<<dStatEnable
EDiskDRVRflags SET EDiskDRVRflags!1<<dNeedLock
dc.b EDiskDRVRflags,0 ; drvFlags (upper byte)
dc.w 0 ; drvDelay, no delay
dc.w 0 ; drvEMask, no event mask
dc.w 0 ; drvMenu, no menu
dc.w EDiskOpen-EDiskDRVR ; drvOpen, offset of OPEN routine
dc.w EDiskPrime-EDiskDRVR ; drvPrime, offset of PRIME routine
dc.w EDiskControl-EDiskDRVR ; drvCtl, offset of ConTroL routine
dc.w EDiskStatus-EDiskDRVR ; drvStatus, offset of STATUS routine
dc.w EDiskClose-EDiskDRVR ; drvClose, offset of CLOSE routine
string pascal
dc.b '.EDisk' ; drvName, including leading length byte
align 2 ; force back to even boundaries
; Decode table for Status Calls
StatusDecode
dc.w statFmtLst-(*+4)
dc.w fmtLstCode ; Get Format List status call
dc.w statDrvSts-(*+4)
dc.w drvStsCode ; Drive Status call
dc.w statDrvSize-(*+4) ; <1.7>
dc.w drvSizeCode ; Drive Size Status call <1.7>
dc.w -1 ; indicate end of status decode table
dc.w StatusErr ; return StatusErr if unknown csCode
; Decode table for Control Calls
ControlDecode
dc.w ctlKillIO-(*+4) ; <1.2>
dc.w killCode ; KillIO control call (not supported) <1.2>
dc.w ctlVerify-(*+4)
dc.w VerifyCC ; Verify control call
dc.w ctlFormat-(*+4)
dc.w FormatCC ; Format control call
dc.w ctlEject-(*+4)
dc.w EjectCode ; Eject control call
dc.w ctlDriveIcon-(*+4)
dc.w IconCC ; Physical Drive Icon control call
dc.w ctlMediaIcon-(*+4)
dc.w IconLogCC ; Disk Media Icon control call
dc.w ctlDriveInfo-(*+4)
dc.w infoCC ; Drive Info control call
dc.w -1 ; indicate end of control decode table
dc.w ControlErr ; return ControlErr if unknown csCode
title 'EDisk Driver - Open processing'
;_______________________________________________________________________
;
; Routine: EDiskOpen
; Inputs: A0 - pointer to I/O ParamBlock
; A1 - pointer to Device Control Entry (DCE)
; Outputs: D0 - Result Code (noErr/openErr)
; Destroys:
; Calls: none
; Called by: Device Manager
;
; Function: Driver initialization routine
;
; NOTE: EDisks are installed in the following order, Slim1 (lower),
; Slim0 (upper), ROM Disk, RAM Disk. This is the order that
; the start code will attempt to boot from them, unless this
; has been overriden with the Startup Device CDEV. This order
; was chosen as follows, removable devices first, fixed devices
; last. For Slims, the lower Slim is checked first to be consistent
; with the two drive Mac SE / Harpo Floppy drive search order,
; which checks the lower drive first. For ROM/RAM disks, the RAM
; disk is searched first, and then the ROM disks are searched. The
; user can still override this order, by picking one with the CDEV.
; Also, gaps may be left in the drive numbering for drive which
; aren't found, when installing them in the drive queue, because
; the startup device drive number is saved in parameter ram,
; and we don't want it moving around across boots.
;_______________________________________________________________________
InitTable
dc.l 0 ; RamDisk doesn't have poll pointer
dc.w RAMDiskHandler-(*+2) ; RamDisk function handler
dc.w RAMDiskMediaIcon-(*+2) ; RamDisk media icon pointer
dc.w RAMDiskDriveIcon-(*+2) ; RamDisk drive icon pointer
dc.w RAMDiskName-(*+2) ; RamDisk drive name pointer
dc.l (1<<15)+\ ; volatile media
(0<<11)+\ ; primary
(1<<10)+\ ; fixed
(0<<9)+\ ; iwm (not SCSI)
(0<<8)+\ ; internal
ramDiskType ; RAM disk
dc.b (1<<CreateWithXSums) ; flags
dc.b $48 ; DiskInPlaceInit = non-ejectable, re-mount
InitTablePPC
dc.l 0 ; RamDisk doesn't have poll pointer
dc.w RAMDiskHandlerPPC-(*+2) ; RamDisk function handler for PowerPC
dc.w RAMDiskMediaIcon-(*+2) ; RamDisk media icon pointer
dc.w RAMDiskDriveIcon-(*+2) ; RamDisk drive icon pointer
dc.w RAMDiskName-(*+2) ; RamDisk drive name pointer
dc.l (1<<15)+\ ; volatile media
(0<<11)+\ ; primary
(1<<10)+\ ; fixed
(0<<9)+\ ; iwm (not SCSI)
(0<<8)+\ ; internal
ramDiskType ; RAM disk
dc.b (0<<CreateWithXSums) ; flags
dc.b $48 ; DiskInPlaceInit = non-ejectable, re-mount
PrimaryROMdisk
dc.l 0 ; RomDisk doesn't have poll pointer
dc.w ROMDiskHandler-(*+2) ; RomDisk function handler
dc.w ROMDiskMediaIcon-(*+2) ; RomDisk media icon pointer
dc.w ROMDiskDriveIcon-(*+2) ; RomDisk drive icon pointer
dc.w ROMDiskName-(*+2) ; RomDisk drive name pointer
dc.l (0<<11)+\ ; primary
(1<<10)+\ ; fixed
(0<<9)+\ ; iwm (not SCSI)
(0<<8)+\ ; internal
romDiskType ; ROM disk
dc.b (1<<CreateWithXSums) ; flags
dc.b $08 ; DiskInPlaceInit = non-ejectable
InitEntrySize equ *-PrimaryROMdisk ; size of an initialization table entry
SecondaryROMdisk
dc.l 0 ; RomDisk doesn't have poll pointer
dc.w ROMDiskHandler-(*+2) ; RomDisk function handler
dc.w ROMDiskMediaIcon-(*+2) ; RomDisk media icon pointer
dc.w ROMDiskDriveIcon-(*+2) ; RomDisk drive icon pointer
dc.w ROMDiskName-(*+2) ; RomDisk drive name pointer
dc.l (1<<11)+\ ; secondary
(1<<10)+\ ; fixed
(0<<9)+\ ; iwm (not SCSI)
(0<<8)+\ ; internal
romDiskType ; ROM disk
dc.b (1<<CreateWithXSums) ; flags
dc.b $08 ; DiskInPlaceInit = non-ejectable
EDiskOpen ; all regs saved by Device Manager
move.l a0,-(sp) ; save pointer to I/O param block
; Find the highest used drive number
move.l DCtlRefNum(a1),d7 ; d7.high := driver ref num
move.w #5,d7 ; d7 := refnum/highest drive number
move.l DrvQHdr+QHead,d0 ; get the drive queue head
beq.s @FoundDriveNumber ; if drive queue is empty
@NextDriveQueue
movea.l d0,a0 ; a0 := drive queue element
cmp.w DQDrive(a0),d7 ; check for a match
bhs.s @NextDriveNumber ; if drive number already in use
move.w DQDrive(a0),d7 ; this is now the highest drive number
@NextDriveNumber
move.l QLink(a0),d0 ; check next drive queue element
bne.s @NextDriveQueue ; if queue element exists
@FoundDriveNumber
addq.w #1,d7 ; d7 := next drive number
lea InitTable,a6 ; a6 := assume pointer to 68k initial values <2>
IF newEdiskProt THEN
cmpi.b #EMMU1,MMUType ; check for an emulated MMU
bne.s @NoEMMU
lea InitTablePPC,a6 ; a6 := pointer to PowerPC initial values
@NoEMMU
ENDIF
move.l BootGlobPtr,a2 ; get ptr to BootGlobs <T2>
move.l sgRamDiskBase(a2),d2 ; base of RAM disk <T4>
move.l d2,d3 ; get a copy in d3 <T4>
add.l sgRamDiskSize(a2),d3 ; end of ram disk in d3 <T4>
suba.l a2,a2 ; a2 := HeaderInfoPtr (none for RamDisk) <2>
move.l d2,d1 ; get start addr in d2 <T4>
moveq.l #0,d2 ; DataStartPtr := 0 <2>
cmp.l d1,d3 ; see if it has any bytes
bsr CreateEDrive ; create the RAM disk
@noDisk ; ENDIF
; search for, and install ROM disks
movea.l RomBase,a2 ; start searching at the base of ROM
@RomDiskLoop ;
bsr.w CheckForRomDisk ; see if it is a ROM disk
bne.s @NextRomDisk ; if not, try the next block
moveq.l #0,d1 ; assume no checksums unless header says otherwise
move.l a2,d2 ; DataStartPtr := base of rom disk for now
move.l a2,d3 ; DataEndPtr := base of rom disk for now
bsr.s CreateEDrive ; create the RAM disk
lea SecondaryROMdisk,a6 ; all future ROM disks are secondary
@NextRomDisk ;
adda.l #RomDiskAlign,a2 ; point to next block to check
cmpa.l #RomSpaceEnd,a2 ; see if end reached
blo.s @RomDiskLoop ; search the entire space
; see if we have any EDisks to drive, abort OPEN if none.
moveq.l #OpenErr,d0 ; if no drives found, return OpenErr
swap d7 ; d7.low := driver ref num
lea DrvQHdr+QHead-QLink,a0 ; point to the drive queue head
@CheckNeXTDrive
move.l QLink(a0),d1 ; check next drive queue element
beq.s @OpenDone ; if end of queue, and not found, kill the open
movea.l d1,a0 ; a0 := drive queue element
cmp.w dQRefNum(a0),d7 ; is this one of ours
bne.s @CheckNeXTDrive ; if not, check the NeXT one
; there are some EDisks in the drive queue, guess we need a driver for them.
move.l #EDiskVarsSize,d0 ; size of block to allocate
_NewPtr ,SYS,CLEAR ; allocate memory for globals
movea.l a0,a2 ; a2 := pointer to globals
move.l a2,DCtlStorage(a1) ; save globals pointer in DCE
move.l a1,DCEpointer(a2) ; save pointer to DCE in globals
move.w @RTS,FindDqePatch(a2) ; initialize FindDQE patch routine
move.w @RTS,PrimePatch(a2) ; initialize Prime patch routine
; Install the VBL task to look for SLIM insertions and removals
lea EDiskPollTask,a4 ; get the task address
moveq.l #8-1,d4 ; loop counter (8 times)
@InitPolling
lea VTask(a2),a0 ; a0 := pointer to VTask
jsr (a4) ; poll 8 times to init inserted status
dbra d4,@InitPolling ; and mount drives, and compute sizes
lea VTask(a2),a0 ; a0 <- VBL task
addq.w #vType,qType(a0) ; initialize qType field
move.l a4,vblAddr(a0) ; initialize vblAddr field
_VInstall ; install the VBL task
moveq.l #NoErr,d0 ; no error
@OpenDone
movea.l (sp)+,a0 ; restore pointer to I/O param block
move.w d0,ioResult(a0) ; return open status in ioResult
@rts rts
title 'EDisk Driver - Create EDrive'
;_______________________________________________________________________
;
; Routine: CreateEDrive
; Inputs: ccr.z - bne if drive should be created, beq if not
; A2 - HeaderInfoPtr
; D1 - CheckSumPtr
; D2 - DataStartPtr
; D3 - DataEndPtr
; D7.hi - EDisk Driver RefNum
; D7.lo - drive number
; A6 - pointer to InitTable info for this drive
; Outputs: D7.hi - EDisk Driver RefNum
; D7.lo - drive number + 1
; A6 - pointer to InitTable info for next drive
; Destroys: D0, A0, A3, A4
; Calls: none
; Called by: EDiskOpen
;
; Function: Creates and initializes the EDiskDriveInfo for the specified
; EDisk, and installs the drive queue entry for it.
;
;_______________________________________________________________________
CreateEDrive
beq.s @Done ; skip it if not used
moveq.l #EDiskDriveInfoSize,d0 ; size of info to allocate
_NewPtr ,Sys,Clear ; allocate the drive info
bne.s @Done ; if can't allocate, don't create drive
add.l #DQE-SLIMRegPtr,a0 ; point to the drive queue entry <T6>
movea.l a6,a3 ; a3 := running pointer to init table entry
move.l (a3)+,SLIMRegPtr(a0) ; initialize the SLIMRegPtr <T6>
movea.w (a3)+,a4 ; get the icon/name ptr
adda.l a3,a4 ; make it absolute
move.l a4,HWDepProcPtr(a0) ; initialize the HWDepProcPtr <T6>
move.l a2,HeaderInfoPtr(a0) ; initialize the HeaderInfoPtr <T6>
move.l d1,CheckSumPtr(a0) ; initialize CheckSumPtr <T6>
move.l d2,DataStartPtr(a0) ; initialize DataStartPtr |
move.l d3,DataEndPtr(a0) ; initialize DataEndPtr v
movea.w (a3)+,a4 ; get the icon/name ptr
adda.l a3,a4 ; make it absolute
move.l a4,MediaIconPtr(a0) ; initialize the icon ptr
movea.w (a3)+,a4 ; get the icon/name ptr
adda.l a3,a4 ; make it absolute
move.l a4,DriveIconPtr(a0) ; initialize the icon ptr
movea.w (a3)+,a4 ; get the icon/name ptr
adda.l a3,a4 ; make it absolute
move.l a4,WhereStringPtr(a0) ; initialize the name ptr
move.l (a3)+,DriveInfo(a0) ; initialize DriveInfo
move.w (a3)+,Flags(a0) ; initialize flags, DiskInPlaceInit
move.b #%01010101,InsertedStatus(a0) ; initialize inserted status to bouncing ^
sub.l d1,d3 ; calculate ram disk size |
move.l d3,RamDiskSize(a0) ; store it in globals <T6>
addq.w #1,qType(a0) ; use long drive size format
addq.w #1,Installed(a0) ; mark the drive as installed
move.l d7,d0 ; get disk drive number, and refNum
swap d0 ; move to high word, refNum to low word
move.l a0,a3 ; make a copy of ptr to info
_AddDrive ; add the drive to the drive queue
move.l d1,a0 ; get ptr to base of Edisk data
move.l d3,d1 ; get RamDiskSize
moveq.l #DisableEDiskWrites,d0 ; always disable writes at startup
bsr.w HWDependent ; disable writing to the EDisk
@Done addq.w #1,d7 ; update drive number
adda.w #InitEntrySize,a6 ; point to next drive init entry
rts ; EDisk drive is installed
title 'EDisk Driver - Check for ROM Disk'
;_______________________________________________________________________
;
; Routine: CheckForRomDisk
; Inputs: A2 - HeaderInfoPtr
; D7.hi - EDisk Driver RefNum
; Outputs: D0 - zero if valid ROM disk header, else non-zero
; ccr.z - bne if invalid header
; Destroys: D0, D1, A0, A3, A4
; Calls: none
; Called by: EDiskOpen
;
; Function: Checks the EDisk header to see if it exists (no bus error),
; and has a valid signature. If it is valid, compares it
; against all other ROM Disks found, and if it's header block
; is not identical to any other ROM Disk (in case address
; wrap around causes repeated images), returns a result
; indicating that it should be created.
;
;_______________________________________________________________________
with EDiskHeader
CheckForRomDisk
move.w sr,-(sp) ; save old interrupt mask
ori.w #HiIntMask,sr ; disable interrupts (stealing BusErrVct)
move.l BusErrVct,-(sp) ; save old bus error vector
lea @NotFound,a0 ; new handler address
move.l a0,BusErrVct ; setup bus error handler
movea.l sp,a4 ; mark the stack
lea HeaderTemplate,a3 ; point to expected values
lea HdrBlockSize(a2),a0 ; point to header data
moveq.l #(HdrDeviceSize-HdrBlockSize)/4-1,d0 ; loop counter
@SigCmpLoop
cmpm.l (a0)+,(a3)+ ; compare the values
dbne d0,@SigCmpLoop ; compare the blocks
@NotFound
movea.l a4,sp ; pop stack in case of bus error
move.l (sp)+,BusErrVct ; restore bus error vector
move.w (sp)+,sr ; restore interrupt mask
addq.w #1,d0 ; see if we had a match
bne.s @Done ; exit if not
; valid header found, now let's see if it's unique.
move.l d7,d1 ; get driver ref num
swap d1 ; d1.low := driver ref num
lea DrvQHdr+QHead-QLink,a0 ; point to the drive queue head
@CheckNeXTDrive
move.l QLink(a0),d0 ; check next drive queue element
beq.s @Done ; if not found, it's unique (d0=0)
movea.l d0,a0 ; a0 := drive queue element
cmp.w dQRefNum(a0),d1 ; is this one of ours
bne.s @CheckNeXTDrive ; if not, check the NeXT one
cmpi.b #romDiskType,\ ; it's one of ours
DriveInfo+3(a0) ; is it a ROM disk
bne.s @CheckNeXTDrive ; if not, check the NeXT one
moveq.l #EDiskHeaderSize/4-1,d0 ; compare the entire header
movea.l a2,a3 ; point to our header
movea.l HeaderInfoPtr(a0),a4 ; point to existing drive's header
@HdrCmpLoop
cmpm.l (a3)+,(a4)+ ; compare the values
dbne d0,@HdrCmpLoop ; compare the blocks
bne.s @CheckNeXTDrive ; if not the same, check the NeXT one
@Done tst.l d0 ; set ccr based on D0
rts ; all done
endwith
title 'EDisk Driver - Close processing'
;_______________________________________________________________________
;
; Routine: EDiskClose
; Inputs: A0 - pointer to I/O ParamBlock
; A1 - pointer to Device Control Entry (DCE)
; Outputs: D0 - Result Code (closErr)
; Destroys:
; Calls: none
; Called by: Device Manager
;
; Function: Driver shutdown routine
;
;_______________________________________________________________________
EDiskClose ; all regs saved by Device Manager
moveq.l #closErr,d0 ; return Close Error status
rts ; not closable at present
title 'EDisk Driver - Read / Write processing'
;_______________________________________________________________________
;
; Routine: EDiskPrime
; Inputs: A0 - pointer to I/O ParamBlock
; A1 - pointer to Device Control Entry (DCE)
; Outputs: D0 - Result Code
; Destroys:
; Calls: IODone
; Called by: Device Manager
;
; Function: Driver Read/Write routines
;
;_______________________________________________________________________
EDiskPrime ; all regs saved by Device Manager
;_Debugger
move.w ioTrap(a0),-(sp) ; save trap word to test immediate on exit <1.2>
moveq.l #0,d4 ; d4 := bytes transferred
movem.l a0/a1/d4,-(sp) ; save iopb, dce. allocate scratch longword
bsr.w FindDQE ; Find the drive queue element
bne.w @PrimeAbort ; return with error if not found or offLine <H1>
; check buffer paramaters
moveq.l #ParamErr,d0 ; assume parameter error
move.l ioByteCount(a0),d1 ; d1 := byte count
beq @PrimeAbort ; if byte count is zero <H1>
move.l dCtlPosition(a1),d2 ; d2 := starting byte offset
movem.l CheckSumPtr(a3),a4/a5/a6; get checksum/start/end pointers
adda.l d2,a5 ; a5 := RAM disk start addr
suba.l a5,a6 ; a6 := max byte count allowed
cmpa.l d1,a6 ; check for out of bounds
blt @PrimeAbort ; read past end of disk <H1>
; check alignment and direction
move.l d1,d7 ; get byte count
or.l d2,d7 ; check offset and byte count
andi.w #$01FF,d7 ; for multiples of block size (512)
bne @PrimeAbort ; if request not block aligned <H1>
move.l ioBuffer(a0),d6 ; d6 := buffer addr
moveq.l #rdVerify,d7 ; prepare to test for read verify
and.w IOPosMode(a0),d7 ; test for verify mode
sne d7 ; d7 := $FF if read verify
neg.b d7 ; d7 := 0 if read, 1 if read verify
move.l d6,d0 ; get destination addr in d0 <T2>
_StripAddress ; clear upper byte if necessary <T2>
cmpi.b #aWrCmd,ioTrap+1(a0) ; check for write cmd
movea.l a5,a0 ; a0 := source address
movea.l d0,a1 ; a1 := clean dest address <T2>
bne.s @paramsOK ; if not write, continue setting up for I/O
; check write params
moveq.l #2,d7 ; d7 := 2 if write
moveq.l #wPrErr,d0 ; assume write protect error
tst.b WriteProtected(a3) ; can we write to this disk?
bmi.s @PrimeAbort ; return with error if write protected <H1>
; d1 := byte count
; a0 := source address
; a1 := clean dest address
movem.l a0/d1,-(sp) ; save size, length for disabling the disk
moveq.l #EnableEDiskWrites,d0 ; hardware dependent function code
bsr.w HWDependent ; allow writing to the EDisk
exg a0,a1 ; swap source and dest if write
; select data transfer routine
@paramsOK
roxr.b #1,d6 ; ccr.x := ioBuffer is odd
addx.b d7,d7 ; shift result into d7
move.l a4,d6 ; prepare to test for checksumming
subq.l #1,d6 ; ccr.x := checksumming is disabled
roxl.w #2,d7 ; shift result into d7, and mult by 2 for index
lsr.l #9-2,d2 ; compute index into checksum table
adda.l d2,a4 ; a4 := pointer to checksum for first block
lea @DispatchTable,a5 ; point to the dispatch table
adda.w (a5,d7.w),a5 ; a5 := pointer to the routine
jsr PrimePatch(a2) ; allow patching here
move.l #512,d3 ; d3 := constant 512
; transfer the data a block at a time (usually)
@BlockLoop
moveq.l #0,d5 ; d5 := checksum, initialize to zero
moveq.l #(512/4)-1,d2 ; d2 := loop count for 1 block (4 bytes per loop)
jmp (a5) ; dispatch to the routine
@BlockDone
add.l d3,d4 ; update num done (512 more bytes done)
sub.l d3,d1 ; decrement bytecount
bhi.s @BlockLoop ; do next block if any blocks left
; transfer complete
@PrimeDone
moveq.l #noErr,d0 ; success
@PrimeErr
btst #EDiskProtect,Flags(a3) ; check if EDisk is protected
bne.s @ediskProtected ; IF EDisk is not protected THEN
move.l d0,d2 ; save result code in d2
movem.l (sp)+,a0/d1 ; restore size, length for disable code
moveq.l #DisableEDiskWrites,d0 ; hardware dependent function code
bsr.w HWDependent ; disable writing to the EDisk
move.l d2,d0 ; restore d0 with result code
@ediskProtected ; ENDIF
@PrimeAbort
movem.l (sp)+,a0/a1/d1 ; restore iopb, dce. pop scratch longword <2>
move.l d4,ioNumDone(a0) ; return number of bytes transferred
add.l d4,dCtlPosition(a1) ; update position pointer
bra.w EDiskDone ; return with error
; EDisk <-> Buffer, even or odd aligned, no checksumming (all blocks at once)
@ReadWrite
move.l d1,d0 ; get the byte count
_BlockMove ; move the data
move.l d1,d4 ; indicate all bytes moved
bra.s @PrimeDone ; return with success
title 'EDisk Driver - Read processing'
; EDisk -> Buffer, with checksumming, buffer even aligned (one block at a time)
@ReadEvenXsum
moveq.l #(512/8)-1,d2 ; d2 := loop count for 1 block (8 bytes per loop)
@ReadEvenLoop
move.l (a0)+,d7 ; fetch the source
add.l d5,d5 ; rotate the checksum
addx.l d7,d5 ; add source to the checksum
move.l d7,(a1)+ ; write it to the destination
move.l (a0)+,d7 ; fetch the source
add.l d5,d5 ; rotate the checksum
addx.l d7,d5 ; add source to the checksum
move.l d7,(a1)+ ; write it to the destination
dbra d2,@ReadEvenLoop ; loop through the entire block
@ReadDone
cmp.l (a4)+,d5 ; check the checksum
beq.s @BlockDone ; done with this block
moveq.l #badDCksum,d0 ; indicate data checksum error
bra.s @PrimeErr ; return with checksum error
; EDisk -> Buffer, with checksumming, buffer odd aligned (one block at a time)
@ReadOddXsum
subq.l #3,a1 ; back up the dest ptr, make it even
move.l (a1),d7 ; d7 := x x x A
addq.l #*+2-@ReadOddXsum,a5 ; after first block skip the code above
@ReadOddLoop
move.l (a0)+,d6 ; d6 := A B C D
add.l d5,d5 ; rotate the checksum
addx.l d6,d5 ; add source to the checksum
rol.l #8,d6 ; d6 := B C D A
move.b d6,d7 ; d7 := x x x A
move.l d7,(a1)+ ; write it to the destination
move.l d6,d7 ; d7 := B C D A
dbra d2,@ReadOddLoop ; loop through the entire block
move.b 3(a1),d7 ; d7 := B C D x
move.l d7,(a1) ; update last long word
bra.s @ReadDone ; done with this block
title 'EDisk Driver - Verify processing'
; Read Verify calls with and without checksumming
; buffer even aligned (one block at a time)
@VerifyEven
movea.l sp,a4 ; if no checksum, point to stack
@VerifyEvenXsum
@VerifyEvenLoop
move.l (a0)+,d7 ; fetch the source
add.l d5,d5 ; rotate the checksum
addx.l d7,d5 ; add source to the checksum
cmp.l (a1)+,d7 ; compare the buffers
dbne d2,@VerifyEvenLoop ; loop through the entire block
beq.s @VerifyGood ; if blocks are equal
@VerifyError
moveq.l #dataVerErr,d0 ; indicate verify failed
bra.s @PrimeErr ; return with error
; Read Verify calls with and without checksumming
; buffer odd aligned (one block at a time)
@VerifyOddXsum
lea @VerifyOddLoop,a5 ; skip the following code after the first time
@VerifyOddSetup
subq.l #1,a1 ; back up 1 byte to align
move.l (a1)+,d6 ; d6 := x A B C
rol.l #8,d6 ; d6 := A B C x
jmp (a5) ; start the loop
@VerifyOdd
addq.l #4,a5 ; resume after the next instruction
bra.s @VerifyOddSetup ; setup for the odd aligned compare
movea.l sp,a4 ; if no checksum, point to stack
@VerifyOddLoop
move.l d6,d7 ; d7 := A B C x
move.l (a1)+,d6 ; d6 := D E F G
rol.l #8,d6 ; d6 := E F G D
move.b d6,d7 ; d7 := A B C D
add.l d5,d5 ; rotate the checksum
addx.l d7,d5 ; add source to the checksum
cmp.l (a0)+,d7 ; compare the buffers
dbne d2,@VerifyOddLoop ; loop through the entire block
bne.s @VerifyError ; if not a match
@VerifyGood
move.l d5,(sp) ; force compare when not checksumming
bra.s @ReadDone ; check the checksum
title 'EDisk Driver - Write processing'
; EDisk <- Buffer, with checksumming, buffer even aligned (one block at a time)
@WriteEvenXsum
moveq.l #(512/8)-1,d2 ; d2 := loop count for 1 block (8 bytes per loop)
@WriteEvenLoop
move.l (a0)+,d7 ; fetch the source
add.l d5,d5 ; rotate the checksum
addx.l d7,d5 ; add source to the checksum
move.l d7,(a1)+ ; write it to the destination
move.l (a0)+,d7 ; fetch the source
add.l d5,d5 ; rotate the checksum
addx.l d7,d5 ; add source to the checksum
move.l d7,(a1)+ ; write it to the destination
dbra d2,@WriteEvenLoop ; loop through the entire block
@WriteDone
move.l d5,(a4)+ ; write out the checksum
bra.w @BlockDone ; done with this block
; EDisk <- Buffer, with checksumming, buffer odd aligned (one block at a time)
@WriteOddXsum
subq.l #1,a0 ; back up the source ptr, make it even
move.l (a0)+,d7 ; d7 := x A B C
rol.l #8,d7 ; d7 := A B C x
addq.l #*+2-@WriteOddXsum,a5 ; after first block skip the code above
@WriteOddLoop
move.l (a0)+,d6 ; d6 := D E F G
rol.l #8,d6 ; d6 := E F G D
move.b d6,d7 ; d7 := A B C D
add.l d5,d5 ; rotate the checksum
addx.l d7,d5 ; add source to the checksum
move.l d7,(a1)+ ; write it to the destination
move.l d6,d7 ; d7 := E F G D
dbra d2,@WriteOddLoop ; loop through the entire block
bra.s @WriteDone ; done with this block
; Table to dispatch to proper routine
@DispatchTable
dc.w @ReadEvenXsum-@DispatchTable ; 0 0 0 0 - read, even, xsum enabled
dc.w @ReadWrite-@DispatchTable ; 0 0 0 1 - read, even, xsum disabled
dc.w @ReadOddXsum-@DispatchTable ; 0 0 1 0 - read, odd, xsum enabled
dc.w @ReadWrite-@DispatchTable ; 0 0 1 1 - read, odd, xsum disabled
dc.w @VerifyEvenXsum-@DispatchTable ; 0 1 0 0 - verify, even, xsum enabled
dc.w @VerifyEven-@DispatchTable ; 0 1 0 1 - verify, even, xsum disabled
dc.w @VerifyOddXsum-@DispatchTable ; 0 1 1 0 - verify, odd, xsum enabled
dc.w @VerifyOdd-@DispatchTable ; 0 1 1 1 - verify, odd, xsum disabled
dc.w @WriteEvenXsum-@DispatchTable ; 1 0 0 0 - write, even, xsum enabled
dc.w @ReadWrite-@DispatchTable ; 1 0 0 1 - write, even, xsum disabled
dc.w @WriteOddXsum-@DispatchTable ; 1 0 1 0 - write, odd, xsum enabled
dc.w @ReadWrite-@DispatchTable ; 1 0 1 1 - write, odd, xsum disabled
title 'EDisk Driver - Control / Status processing'
;_______________________________________________________________________
;
; Routine: EDiskControl / EDiskStatus / KillIO
; Inputs: A0 - pointer to I/O ParamBlock
; A1 - pointer to Device Control Entry (DCE)
; Outputs: D0 - Result Code
; Destroys:
; Calls: FindDQE, EDiskDone
; Called by: Device Manager
;
; Function: Driver Control and Status routines
;
;_______________________________________________________________________
EDiskControl ; all regs saved by Device Manager
lea ControlDecode,a2 ; offset of decode table
bra.s HandleControlStatus ; join common code
EDiskStatus ; all regs saved by Device Manager
lea StatusDecode,a2 ; offset of decode table
* bra.s HandleControlStatus ; join common code (fall into it)
HandleControlStatus
move.w ioTrap(a0),-(sp) ; save trap word to test immediate on exit <1.2>
pea EDiskDone ; return through EDiskDone
move.w csCode(a0),d1 ; get the control/status code
@search move.l (a2)+,d0 ; get table entry
bmi.s @exit ; exit with error if not in list
cmp.w d0,d1 ; is it a match
bne.s @search ; keep looking until found
swap d0 ; get offset of routine
pea (a2,d0.w) ; push address of the routine
bra.w FindDQE ; find the DQE before calling routine
@exit movea.l dCtlStorage(a1),a2 ; a2 := pointer to EDiskVars
addq.l #4,sp ; <SM4>
bra.w EDiskDone2 ; return through EDiskDone2 <SM4>
ctlKillIO
move.w #immed,4(sp) ; make saved ioTrap an immediate call <1.2>
moveq.l #ControlErr,d0 ; we don't support KillIO, return an error <1.2>
rts ; return through EDiskDone
title 'EDisk Driver - Control / Status processing - Eject'
ctlEject
move.l d1,d0 ; get found status, ignore offline
bne.s @EjectErr ; return error if not found
bclr.b #MountedFlag,Flags(a3) ; mark it as not mounted
move.b DiskInPlace(a3),d0 ; see if any disk
ble.s @EjectDone ; if no disk, just ignore it
subq.b #8,d0 ; see if ejectable
beq.s @EjectDone ; if not ejectable, just ignore it
; if disk in place was $48 (non-ejectable, but call driver anyway) we will force a
; disk in place event to be posted by the polling task, to re-mount the volume.
moveq.l #EjectEDisk,d0 ; hardware dependent function code
bsr.w HWDependent ; start the eject, update DiskInPlace
@EjectDone
moveq.l #noErr,d0 ; return with success
@EjectErr
rts ; all done
title 'EDisk Driver - Control / Status processing - Format'
ctlFormat
bne @exit ; return with error if no drive or offline
; d1 := byte count
; a0 := source address
; a3 := ptr to drive queue element
move.l CheckSumPtr(a3),a0 ; put base addr of Edisk in a0
tst.l a0 ; check for no checksums
bne.s @checksumsOn ; IF no checksums THEN
move.l DataStartPtr(a3),a0 ; get real start of disk
@checksumsOn ; ENDIF
move.l DataEndPtr(a3),d1 ; put end of edisk in d1
sub.l a0,d1 ; get length in d1
movem.l a0/d1,-(sp) ; save size, length for enabling the disk
moveq.l #EnableEDiskWrites,d0 ; hardware dependent function code
bsr.w HWDependent ; enable writing to the EDisk
moveq.l #paramErr,d0 ; assume parameter error
move.w (a4),d1 ; get the format kind parameter
subq.w #1,d1 ; only allow 0 or 1
bls.s @CheckWrProt ; if in range, continue
addq.w #2,d1 ; -1 is a special case (destroys signature too)
bne.s @done ; if not -1, 0, or 1, return paramErr
cmpi.b #ramDiskType,DriveInfo+3(a3) ; see if it is a ram disk
bne.s @done ; if not, return the paramErr
lea DrvQHdr,a1 ; get the queue header
movea.l a3,a0 ; get the Ram Disk drive queue element
_DeQueue ; remove it from the drive queue
moveq.l #0,d6 ; fake RAM test passed
bra.s @SkipTest ; skip the test, and just clear it
@CheckWrProt
moveq.l #wPrErr,d0 ; assume write protect error
tst.b WriteProtected(a3) ; can we write to this disk?
bmi.s @done ; return write protect error if not
bsr.w CreateEDiskHeader ; write out a signature
moveq.l #0,d6 ; fake RAM test passed
@SkipTest
movem.l CheckSumPtr(a3),a0/a1/a4; get the checksum/start/end pointers
move.l a0,d2 ; see if has checksums, assume no error.
bne.s @ClearDisk ; if has checksums, clear them
movea.l a1,a0 ; otherwise, clear data as checksums
@ClearDisk
moveq.l #0,d0 ; clear to zero, assume success
tst.l d6 ; see if test passed <1.3>
beq.s @FormatStart ; if passed, initialize RAM and checksums
moveq.l #Fmt1Err,d0 ; indicate that format failed
bra.s @done ; all done
@NextBlock
moveq.l #(512/4)-1,d1 ; inner loop counter
@BlockLoop
move.l d0,(a1)+ ; clear a longword at a time
dbra d1,@BlockLoop ; clear the whole block
move.l d0,(a0)+ ; clear the checksum too
@FormatStart
cmpa.l a1,a4 ; see if all blocks cleared
bhi.s @NextBlock ; loop through all of the blocks
@done move.l d0,d2 ; save error code
IF newEdiskProt THEN
; d1 := byte count
; a0 := source address
; a3 := ptr to drive queue element
movem.l (sp)+,a0/d1 ; restore size, length for disabling the disk
ENDIF
moveq.l #DisableEDiskWrites,d0 ; hardware dependent function code
bsr.w HWDependent ; disable writing to the EDisk
move.l d2,d0 ; restore error code
@exit rts ; all done
title 'EDisk Driver - Control / Status processing - Verify'
; Verify that each block on the disk can be read
ctlVerify
bne.s @done ; return with error if no drive or offline
movem.l CheckSumPtr(a3),a0/a1/a4; get the checksum/start/end pointers
move.l a0,d0 ; see if has checksums, assume no error.
beq.s @done ; if has checksums, check them
moveq.l #noErr,d0 ; assume success, init checksum
@NextBlock
cmpa.l a1,a4 ; see if all blocks checked
bls.s @done ; exit when all blocks checked
moveq.l #(512/4)-1,d1 ; inner loop counter
@BlockLoop
move.l (a1)+,d3 ; fetch a longword at a time
add.l d0,d0 ; rotate the checksum
addx.l d3,d0 ; add in the data word
dbra d1,@BlockLoop ; check the whole block
sub.l (a0)+,d0 ; check the checksum
beq.s @NextBlock ; if checksum ok, check the next block
@error moveq.l #verErr,d0 ; return verify error.
@done rts ; all done
title 'EDisk Driver - Control / Status processing - FmtLst/DrvSts/DriveInfo'
; Return the list of sizes that can be formatted
statFmtLst
bne.s @done ; return with error if no drive or offline
moveq.l #paramErr,d0 ; assume parameter error
tst.w (a4) ; test number of entries in buffer
ble.s @Done ; if less than 1 entry, report error
move.w #1,(a4)+ ; indicate 1 entry returned
movea.l (a4),a4 ; get the buffer pointer
move.l dQDrvSz(a3),d0 ; get the swapped drive size
swap d0 ; un-swap it
move.l d0,(a4)+ ; return the drive size
move.l #$40000000,(a4) ; current disk has this format
moveq.l #noErr,d0 ; indicate success
@Done rts ; all done
; Return the drive status and drive queue element
statDrvSts
move.l d1,d0 ; get found status, ignore offline
bne.s @Done ; return error if not found
movea.l a4,a1 ; dest address is csParam area
clr.w (a1)+ ; return zero for track
lea WriteProtected(a3),a0 ; start copy with write protected flag
moveq.l #(DQE-WriteProtected)+dQDrvSz2+2,d0 ; number of bytes to copy
_BlockMove ; copy the drive info, and return noErr
@Done rts ; all done
; Return the RAM disk size
statDrvSize
move.l RamDiskSize(a3),(a4) ; return the RAM disk size, in bytes <T6>
rts ; all done <1.6>
; Return the drive type and info flags.
ctlDriveInfo
move.l d1,d0 ; get found status, ignore offline
bne.s @Done ; return error if not found
move.l DriveInfo(a3),(a4) ; return the drive info
@Done rts ; all done
title 'EDisk Driver - Control / Status processing - Drive/Media Icon'
; Return the Icon representing the location of the disk drive
ctlDriveIcon
movea.l DriveIconPtr(a3),a0 ; get drive icon ptr, setup source address
bra.s IconCommon ; join common icon code
; Return the Icon representing the disk media
ctlMediaIcon
movea.l MediaIconPtr(a3),a0 ; get media icon ptr, setup source address
IconCommon
move.l d1,d0 ; get found status, ignore offline
bne.s @Done ; return error if not found
moveq.l #ControlErr,d0 ; return control error if no icon found
move.l a0,d1 ; see if icon exists
beq.s @Done ; if no icon exists, return with error
; copy the icon into the buffer
lea IconBuffer(a2),a1 ; get buffer address (dest address)
move.l a1,(a4) ; return buffer pointer
move.l #IconAndMaskSize,d0 ; setup byte count for icon and mask
_BlockMove ; copy the icon into the buffer
; copy the "Where String" into the buffer
lea WhereStringBuff(a2),a1 ; point past icon, to "where string"
clr.b (a1) ; string length of zero, in case no string found
move.l WhereStringPtr(a3),d1 ; get where string pointer
beq.s @Done ; if no string, don't copy it
movea.l d1,a0 ; setup source address
moveq.l #1,d0 ; zero extend / adjust count
add.b (a0),d0 ; fetch the string length, count the length byte too
cmpi.w #WhereStringSize,d0 ; check to see if too long
bls.s @CopyString ; if in range just copy it
moveq.l #WhereStringSize,d0 ; otherwise truncate to max size
@CopyString
_BlockMove ; copy the string into the buffer
@Done rts ; all done (d0 is noErr from _BlockMove)
title 'EDisk Driver - FindDQE - Find Drive Queue Element'
;_______________________________________________________________________
;
; Routine: FindDQE
; Inputs: A0 - pointer to I/O ParamBlock
; A1 - pointer to Device Control Entry (DCE)
; Outputs: D0 - Drive Found and OnLine Status (noErr, NSDrvErr or offLinErr)
; D1 - Drive Found Status (noErr or NSDrvErr)
; A2 - pointer to EDiskVars
; A3 - pointer to DriveQueueElement for specified drive
; A4 - pointer to csParam field of I/O ParamBlock
; Destroys: D2, D3
; Calls: none
; Called by: Prime, Control, Status routines
;
; Function: Searches the drive queue for the Drive Queue Element
; associated with this Driver Request.
;
;_______________________________________________________________________
FindDQE ; find the drive queue element
movea.l dCtlStorage(a1),a2 ; a2 := pointer to EDiskVars
addq.b #1,Active(a2) ; request in progress, exclude polling <1.2>
jsr FindDqePatch(a2) ; allow patching here
lea DrvQHdr+QHead-QLink,a3 ; get the drive queue head
move.w IODrvNum(a0),d2 ; d2 := drive number
bpl.s @search ; start searching if drivenum is positive
neg.w d2 ; d2 := abs (IODrvNum)
; search the drive queue for the requested drive
@search
move.l QLink(a3),d3 ; check next drive queue element
beq.s @notFound ; if drive queue is empty
movea.l d3,a3 ; a3 := drive queue element
cmp.w DQDrive(a3),d2 ; check for a match
bne.s @search ; if not our drive
move.w dCtlRefNum(a1),d2 ; d2 := our driver ref number
cmp.w DQRefNum(a3),d2 ; compare to drive queue ref num
bne.s @search ; if not for our driver
moveq.l #noErr,d1 ; indicate drive is found
; now check to see if it is really present (onLine)
tst.b DiskInPlace(a3) ; is there a disk
ble.s @offLine ; return off line error if not
moveq.l #CheckEDiskInserted,d0 ; hardware dependent function code
bsr.s HWDependent ; see if disk is inserted
beq.s @offLine ; if not, return offline error
moveq.l #noErr,d0 ; indicate no disk-in-place
@Done lea csParam(a0),a4 ; point to param area
rts ; return with success (d0 = 0 = noErr)
@offLine
moveq.l #offLinErr,d0 ; indicate no disk-in-place
bra.s @Done ; return with error
@notFound
moveq.l #NSDrvErr,d1 ; indicate no such drive error
moveq.l #NSDrvErr,d0 ; indicate no such drive error
bra.s @Done ; return with error
title 'EDisk Driver - EDiskDone - Command Completion'
;_______________________________________________________________________
;
; Routine: EDiskDone
; Inputs: A2 - pointer to EDiskVars
; D0 - Result Code
; Destroys:
; Calls: IODone
; Called by: Prime, Control, Status routines
;
; Function: Completes request processing, by checking error result code,
; and returns control to the device manager through IODone.
;
;_______________________________________________________________________
EDiskDone
subq.b #1,Active(a2) ; request complete, allow polling <1.2>
EDiskDone2 ; <H6><SM4>
movea.l DCEpointer(a2),a1 ; setup DCE pointer in a1 for JIODone
btst.b #NoQueueBit-8,(sp)+ ; check for immediate request <1.2>
bne.s @immed ; if immediate, don't use jIODone <1.2>
move.l jIODone,-(sp) ; get IODone routine address
@immed ext.l d0 ; test for errors
beq.s @done ; if no error
move.w d0,DskErr ; save last error for file system
@done rts ; all done
title 'EDisk Driver - HWDependent - Hardware Dependent Functions'
;_______________________________________________________________________
;
; Routine: HWDependent
; Inputs: A3 - pointer to DriveQElement for specified drive
; D0 - function selector
; Outputs: none
; Destroys: D0
; Calls: none
; Called by:
;
; Function: Tests or performs a hardware dependent function.
;
;_______________________________________________________________________
HWDependent
move.l HWDepProcPtr(a3),-(sp) ; get the handler address
rts ; jump to it
RAMDiskHandler
move.b @decode(pc,d0.w),d0 ; get the routine offset
jmp @decode(pc,d0.w) ; jump to it
@decode
assert (*-@decode)=CheckEDiskInserted
dc.b @checkInserted-@decode
assert (*-@decode)=CheckEDiskReadOnly
dc.b @checkReadOnly-@decode
assert (*-@decode)=EnableEDiskWrites
dc.b @enableWrites-@decode
assert (*-@decode)=DisableEDiskWrites
dc.b @disableWrites-@decode
assert (*-@decode)=EjectEDisk
dc.b @eject-@decode
align 2
@checkInserted
moveq.l #-1,d0 ; always inserted
rts
@checkReadOnly
moveq.l #0,d0 ; never read only
@enableWrites
movem.l a0-a1/d1,-(sp) ; save registers <T5>
moveq #8,d0 ; _EDiskProtect selector |
move.l CheckSumPtr(a3),a0 ; put base addr of ram disk in a0 v
move.l #0,a1 ; indicate we want to unprotect edisk
_HwPriv ; unprotect the disk
movem.l (sp)+,a0-a1/d1
bclr #EDiskProtect,Flags(a3) ; indicate the disk is not protected
rts
@disableWrites
movem.l a0-a1/d1,-(sp) ; save registers
moveq #8,d0 ; _EDiskProtect selector
move.l CheckSumPtr(a3),a0 ; put base addr of ram disk in a0
move.l #1,a1 ; indicate we want to protect edisk
_HwPriv ; write-protect the disk ^
movem.l (sp)+,a0-a1/d1 ; restore registers |
bset #EDiskProtect,Flags(a3) ; indicate the disk is protected
rts ; <T5>
@eject clr.b DiskInPlace(a3) ; mark it as offline
@done rts
IF newEdiskProt THEN
;—————————————————————————
; PowerPC Edisk Routines
;—————————————————————————
RAMDiskHandlerPPC
move.b @decode(pc,d0.w),d0 ; get the routine offset
jmp @decode(pc,d0.w) ; jump to it
@decode
assert (*-@decode)=CheckEDiskInserted
dc.b @checkInserted-@decode
assert (*-@decode)=CheckEDiskReadOnly
dc.b @checkReadOnly-@decode
assert (*-@decode)=EnableEDiskWrites
dc.b @enableWrites-@decode
assert (*-@decode)=DisableEDiskWrites
dc.b @disableWrites-@decode
assert (*-@decode)=EjectEDisk
dc.b @eject-@decode
align 2
@checkInserted
moveq.l #-1,d0 ; always inserted
rts
@checkReadOnly
moveq.l #0,d0 ; never read only
@enableWrites
; a3 = ptr to driveQElement
; d1 = transfer length
; a0 = transfer base
movem.l a0-a1/d1,-(sp) ; save registers
move.l #$80000008,d0 ; selector for PPC EDiskProtect, "unprotect"
move.l d1,a1 ; put size of xfer in a1
_HwPriv ; unprotect the disk
move.l CheckSumPtr(a3),a0 ; put base of checksums in a0
tst.l a0 ; check if checksums are in use
beq.s @noCksums ; IF using checksums THEN
move.l #$80000008,d0 ; selector for PPC EDiskProtect, "unprotect"
move.l DataStartPtr(a3),a1 ; put end of checksums in a1
suba.l a0,a1 ; leave length of checksum area in a1
_HwPriv ; unprotect the disk
@noCksums ; ENDIF
movem.l (sp)+,a0-a1/d1
bclr #EDiskProtect,Flags(a3) ; indicate the disk is not protected
rts
@disableWrites
movem.l a0-a1/d1,-(sp) ; save registers
move.l #$80010008,d0 ; selector for PPC EDiskProtect, "protect"
move.l d1,a1 ; put size of xfer in a1
_HwPriv ; write-protect the disk
move.l CheckSumPtr(a3),a0 ; put base of checksums in a0
tst.l a0 ; check if checksums are in use
beq.s @noCksumsDis ; IF using checksums THEN
move.l #$80010008,d0 ; selector for PPC EDiskProtect, "protect"
move.l DataStartPtr(a3),a1 ; put end of checksums in a1
suba.l a0,a1 ; leave length of checksum area in a1
_HwPriv ; write-protect the checksums
@noCksumsDis ; ENDIF
movem.l (sp)+,a0-a1/d1 ; restore registers
bset #EDiskProtect,Flags(a3) ; indicate the disk is protected
rts ;
@eject clr.b DiskInPlace(a3) ; mark it as offline
@done rts
ENDIF
ROMDiskHandler
move.b @decode(pc,d0.w),d0 ; get the routine offset
jmp @decode(pc,d0.w) ; jump to it
@decode
assert (*-@decode)=CheckEDiskInserted
dc.b @checkInserted-@decode
assert (*-@decode)=CheckEDiskReadOnly
dc.b @checkReadOnly-@decode
assert (*-@decode)=EnableEDiskWrites
dc.b @enableWrites-@decode
assert (*-@decode)=DisableEDiskWrites
dc.b @disableWrites-@decode
assert (*-@decode)=EjectEDisk
dc.b @eject-@decode
align 2
@checkInserted
@checkReadOnly
moveq.l #-1,d0 ; always inserted, always read only
@enableWrites
@disableWrites
rts
@eject clr.b DiskInPlace(a3) ; mark it as offline
@done rts
title 'EDisk Driver - EDiskPollTask - Drive Polling Task'
;_______________________________________________________________________
;
; Routine: EDiskPollTask
; Inputs: A0 - address of VTask (passed by Vertical Retrace Manager)
; Outputs: none
; Destroys:
; Calls: none
; Called by: Vertical Retrace Manager
;
; Function: Polls the SLIM cards to check for insertions and removals.
; Debounces the result, and post events to reflect the action.
;
;_______________________________________________________________________
EDiskPollTask ; a0-a3/d0-d3 saved by int handler
lea EDiskVars-VTask(a0),a2 ; a2 := pointer to EDiskVars
lea DrvQHdr+QHead-QLink,a3 ; get the drive queue head
movea.l DCEpointer(a2),a1 ; get DCE pointer
move.w dCtlRefNum(a1),d3 ; d3 := driver refnum
tst.b Active(a2) ; see if request in progress
beq.s @next ; if not, start searching the drive queue
addq.w #1,VTask+vblCount(a2) ; if active, try again real soon
rts ; return
@search movea.l d2,a3 ; a3 := DriveQElement
cmp.w dQRefNum(a3),d3 ; see if we are the driver
beq.s @CheckDrive ; check our drives
@next move.l QLink(a3),d2 ; check next drive queue element
bne.s @search ; search until end of drive queue
move.w #EDiskPollRate,VTask+vblCount(a2) ; re-initialize the VBL count
rts ; return
@CheckDrive
moveq.l #CheckEDiskInserted,d0 ; hardware dependent function code
bsr.w HWDependent ; see if disk is inserted
addq.w #1,d0 ; ccr.x := 1 if EDisk inserted
move.b InsertedStatus(a3),d1 ; prepare to shift in new inserted status
addx.b d1,d1 ; shift in new inserted status
move.b d1,InsertedStatus(a3) ; update inserted status
moveq.l #InsertedMask,d0 ; prepare to de-bounce, and test inserted
and.b d0,d1 ; see if offline, without bounce
bne.s @CheckOnLine ; if not offline, check online or bounce
@OffLine
tst.b DiskInPlace(a3) ; check online status
bpl.s @next ; if not ejecting, do nothing
clr.b DiskInPlace(a3) ; now mark it offline (ejected)
bra.s @next ; eject complete, check next drive
@CheckOnLine
cmp.b d0,d1 ; see if online, without bounce
bne.s @next ; if bouncing, ignore it until it stops
tst.b DiskInPlace(a3) ; check online status
bmi.s @next ; if ejecting, do nothing
beq.s @OnLine ; if was offline, and just went online
@mount btst.b #MountedFlag,Flags(a3) ; see if it was mounted
bne.s @next ; if already mounted, don't do it again
moveq.l #DiskInsertEvt,d0 ; disk inserted event (zero high word)
movea.l d0,a0 ; disk inserted event passed in a0
move.w DQDrive(a3),d0 ; disk drive number in low word
_PostEvent ; post the disk inserted event
bne.s @next ; if error, don't mark as mounted
bset.b #MountedFlag,Flags(a3) ; mark it as mounted
@toNext bra.s @next ; check the next drive
@OnLine
@SetupDriveInfo
move.b DiskInPlaceInit(a3),\
DiskInPlace(a3) ; mark it as inserted
clr.b WriteProtected(a3) ; mark it as writeable (assume RAM)
move.l HeaderInfoPtr(a3),d0 ; see if it supports headers
beq.s @SetupRAMDisk ; if no headers, must be a RAM based disk
with EDiskHeader
movea.l d0,a0 ; a0 points to device header
move.l HdrFormatTime(a0),\
FormatTime(a3) ; get the unique ID from the header
move.l HdrFormatTicks(a0),\
FormatTicks(a3) ; get the unique ID from the header
; see if device is ROM or RAM
moveq.l #CheckEDiskReadOnly,d0 ; hardware dependent function code
bsr.w HWDependent ; see if disk is read only
move.b d0,WriteProtected(a3) ; setup the RAM=$00 / ROM=$FF flag
bne.s @SetupROMDisk ; if ROM disk, all info comes from header
tst.l SLIMRegPtr(a3) ; see if this is a SLIM (which needs to be sized)
beq.s @SetupRAMDisk ; if not, base and end must already be valid
moveq.l #EnableEDiskWrites,d0 ; hardware dependent function code
bsr.w HWDependent ; allow writes while sizing
bsr.w ComputeSLIMSize ; see how big the SLIM card is
add.l a0,d0 ; compute end ptr
move.l d0,DataEndPtr(a3) ; setup pointer to end of device data
adda.w #EDiskHeaderSize,a0 ; point past the header
move.l a0,CheckSumPtr(a3) ; checksums start just after the header
moveq.l #DisableEDiskWrites,d0 ; hardware dependent function code
bsr.w HWDependent ; no writes now
endwith
@SetupRAMDisk
movem.l CheckSumPtr(a3),d0/d1/d2; get checksum/start/end ptrs
tst.l d0 ; see if checksum ptr is valid
beq.s @BaseFound ; if not, then d1 = base address = start ptr
move.l d0,d1 ; otherwise d1 := base address = checksum ptr
moveq.l #0,d0 ; default to no checksums for now
@BaseFound
btst.b #CreateWithXSums,Flags(a3) ; see if we want checksums
beq.s @UpdateBasePtrs ; if no checksums, DataStartPtr is base
move.l d1,d0 ; checksum ptr := base address
sub.l d2,d1 ; base - end
neg.l d1 ; total size := end - base
addi.l #512*128-1,d1 ; prepare to round up
lsr.l #7,d1 ; divide by 128 (512/4)
andi.w #~(512-1),d1 ; round to block boundary
add.l d0,d1 ; data starts after checksum table
@UpdateBasePtrs
movem.l d0/d1,CheckSumPtr(a3) ; write back checksum/start ptrs
@SetupDriveSize
sub.l d1,d2 ; byte size := end ptr - start ptr
bhs.s @DriveSizeOK ; if size >= 0, use it, else force null range
move.l d1,DataEndPtr(a3) ; setup end of null range
moveq.l #0,d2 ; range is zero bytes
@DriveSizeOK
rol.l #16-9,d2 ; convert to blocks, and swap halves
move.l d2,dqDrvSz(a3) ; fill in the drive size (in blocks)
bra.w @mount ; now mount the drive
@SetupROMDisk
move.l a0,d0 ; remember header address
lea HeaderTemplate,a1 ; point to expected values
with EDiskHeader
lea HdrBlockSize(a0),a0 ; point to header data
moveq.l #(HdrDeviceSize-HdrBlockSize)/4-1,d2 ; loop counter
@cmpLoop
cmpm.l (a0)+,(a1)+ ; compare the values
dbne d2,@cmpLoop ; compare the blocks
beq.s @SigOK ; get header info if signature valid
move.l d0,d1 ; start ptr is header ptr
move.l d1,d2 ; end ptr is start ptr
bra.s @UpdateBasePtrs ; create an empty ROM disk (pretty useless)
@SigOK move.l (a0)+,d0 ; get device size
addq.w #HdrCheckSumOff-HdrFormatTime,a0 ; point to checksum offset in header
lea CheckSumPtr(a3),a1 ; point to checksum ptr in drive info
moveq.l #(HdrMediaIconOff-\
HdrCheckSumOff)/4-1,d2 ; loop for next 3 fields
tst.l SLIMRegPtr(a3) ; see if this is a SLIM (which is ejectable)
bne.s @offsetLoop ; if ejectable, don't get the icon info
moveq.l #(HdrDriveInfo-\
HdrCheckSumOff)/4-1,d2 ; loop for next 6 fields
move.l HdrDriveInfo-HdrCheckSumOff(a0),d1 ; get drive info
beq.s @offsetLoop ; if none specified, use default
move.l d1,DriveInfo(a3) ; setup new drive info
@offsetLoop
addq.l #4,a1 ; leave pointer alone, assume default
move.l (a0)+,d1 ; get the offset
beq.s @nextOffset ; if none, ignore it
cmp.l d0,d1 ; see if offset is reasonable
bhi.s @nextOffset ; if offset past end of device, ignore it
add.l HeaderInfoPtr(a3),d1 ; add device base to offset
move.l d1,-4(a1) ; update the pointer
@nextOffset
dbra d2,@offsetLoop ; loop through all of the fields
movem.l DataStartPtr(a3),d1/d2 ; get start/end ptrs
bra.s @SetupDriveSize ; setup the drive queue size info
endwith
title 'EDisk Driver - ComputeSLIMSize - Get Signature Information'
;_______________________________________________________________________
;
; Routine: ComputeSLIMSize
; Inputs: A0 - pointer to base of SLIM address space for this card
; Outputs: D0 - Device Size in bytes
; Destroys: A1, D1, D2
; Calls: none
; Called by:
;
; Function: Returns the device size for the specified SLIM card.
;
;_______________________________________________________________________
SegmentSize equ 512*1024 ; slims have up to 4 512K byte segments
ComputeSLIMSize
adda.l #4*SegmentSize,a0 ; point past end of last segment
movea.l a0,a1 ; save copy of end address
moveq.l #%0000,d0 ; assume all 4 segments are missing
move.l #'Gary',d1 ; rotating pattern
moveq.l #4-1,d2 ; loop counter
@FillLoop
suba.l #SegmentSize,a0 ; point to base of previous segment
move.l (a0),-(sp) ; save the old contents
rol.l #8,d1 ; change the pattern
move.l d1,(a0) ; write to the ram
cmp.l (a0),d1 ; see if we can read it back
bne.s @NotRAM1 ; if not, it's not RAM
not.l d1 ; complement the pattern
move.l d1,(a0) ; write to the ram
cmp.l (a0),d1 ; see if we can read it back
bne.s @NotRAM2 ; if not, it's not RAM
bset.l d2,d0 ; indicate that the segment is RAM
@NotRAM2
not.l d1 ; restore pattern
@NotRAM1
dbra d2,@FillLoop ; loop through all 4 segments
not.l d1 ; get expected pattern
moveq.l #4-1,d2 ; loop counter
@CheckLoop
suba.l #SegmentSize,a1 ; point to base of previous segment
rol.l #8,d1 ; change the pattern
cmp.l (a1),d1 ; see if we can read it back
beq.s @IsRAM ; if so, it's RAM that didn't wrap around
bclr.l d2,d0 ; indicate that the segment isn't RAM
@IsRAM
dbra d2,@CheckLoop ; loop through all 4 segments
moveq.l #4-1,d2 ; loop counter
@RestoreLoop
move.l (sp)+,(a1) ; restore the old contents
adda.l #SegmentSize,a1 ; point to base of next segment
dbra d2,@RestoreLoop ; loop through all 4 segments
move.b @SizesTable(d0.w),d0 ; encode the segment present bits
moveq.l #19,d1 ; shift amount
lsl.l d1,d0 ; convert segment count to byte count
rts ; all done
@SizesTable
dc.b 0 ; 0000 - RAM, 0.0MB, 0 segments
dc.b 1 ; 0001 - RAM, 0.5MB, 1 segment
dc.b 0 ; 0010 - RAM, illegal configuration
dc.b 2 ; 0011 - RAM, 1.0MB, 2 segments
dc.b 0 ; 0100 - RAM, illegal configuration
dc.b 0 ; 0101 - RAM, illegal configuration
dc.b 0 ; 0110 - RAM, illegal configuration
dc.b 3 ; 0111 - RAM, 1.5MB, 3 segments
dc.b 0 ; 1000 - RAM, illegal configuration
dc.b 0 ; 1001 - RAM, illegal configuration
dc.b 0 ; 1010 - RAM, illegal configuration
dc.b 0 ; 1011 - RAM, illegal configuration
dc.b 0 ; 1100 - RAM, illegal configuration
dc.b 0 ; 1101 - RAM, illegal configuration
dc.b 0 ; 1110 - RAM, illegal configuration
dc.b 4 ; 1111 - RAM, 2.0MB, 4 segments
title 'EDisk Driver - CreateEDiskHeader - Create Header Information'
;_______________________________________________________________________
;
; Routine: CreateEDiskHeader
; Inputs: A3 - pointer to Drive Queue Element for specified drive
; Destroys: A0, A1, D0, D1, D2, D3
; Calls: none
; Called by: ctlFormat
;
; Function: Writes an EDisk Header to the specified device.
;
;_______________________________________________________________________
CreateEDiskHeader
with EDiskHeader
move.l HeaderInfoPtr(a3),d0 ; get header base
beq.s @Done ; if no headers, nothing to do
movea.l d0,a0 ; setup header pointer
moveq.l #EDiskHeaderSize/4-1,d3 ; loop counter
@clrLoop
clr.l (a0)+ ; clear the header block
dbra d3,@clrLoop ; 4 bytes at a time
lea HeaderTemplate,a1 ; point to default values
lea HdrBlockSize-EDiskHeaderSize(a0),a0 ; point to header data
moveq.l #(HdrDeviceSize-HdrBlockSize)/4-1,d3 ; loop counter
@cpyLoop
move.l (a1)+,(a0)+ ; copy the template
dbra d3,@cpyLoop ; 4 bytes at a time
move.l DataEndPtr(a3),d2 ; find end of device (assume = end of data)
sub.l d0,d2 ; d2 := device size
move.l d2,(a0)+ ; setup HdrDeviceSize
lea FormatTime(a3),a1 ; point to drive info
move.l Time,(a1) ; setup the format time
move.l (a1)+,(a0)+ ; setup HdrFormatTime
move.l Ticks,(a1) ; setup the format ticks
move.l (a1)+,(a0)+ ; setup HdrFormatTicks
moveq.l #(HdrDriveInfo-\
HdrCheckSumOff)/4-1,d3 ; loop for next 6 fields
@offsetLoop
addq.l #4,a0 ; leave offset zero, assume not supported
move.l (a1)+,d1 ; get next ptr field
sub.l d0,d1 ; make it an offset from base of device
cmp.l d1,d2 ; see if in range
blo.s @nextOffset ; if out of range, try next one
move.l d1,-4(a0) ; if in range, put it into the header
@nextOffset
dbra d3,@offsetLoop ; loop through all of the fields
@Done rts ; all done
endwith
string asis ; no length on strings
align 2
HeaderTemplate
dc.w 512 ; signature block size
dc.w 1 ; version number 1
dc.b 'EDisk ' ; 12 byte signature
dc.b 'Gary D' ; (brought to you by Gary D)
string pascal ; name strings have leading length byte
IF not padForOverPatch THEN ; removing string to adjust for mods <H1>
align 2
SlimDrive0Name
dc.b 'Upper SLIM Drive'
ENDIF
align 2
SlimDrive1Name
dc.b 'Lower SLIM Drive'
align 2
ROMDiskName
dc.b 'Internal ROM Disk'
align 2
RAMDiskName
dc.b 'Internal RAM Disk'
align 2
title 'EDisk Driver - RAM / ROM Disk Icons'
ROMDiskMediaIcon
ROMDiskDriveIcon
RAMDiskMediaIcon
RAMDiskDriveIcon
dc.l %01111111111111111111111111110000
dc.l %10000001000000000000000100001000
dc.l %10000001000000000111000100000100
dc.l %10000001000000001000100100000010
dc.l %10000001000000001000100100000001
dc.l %10000001000000001000100100000001
dc.l %10000001000000001000100100000001
dc.l %10000001000000001000100100000001
dc.l %10000001000000001000100100000001
dc.l %10000001000000000111000100000001
dc.l %10000000111111111111111100000001
dc.l %10000000000000000000000000000001
dc.l %10000000000000000010000000000001
dc.l %10000000000000001101000000000001
dc.l %10000000000000001000100000000001
dc.l %10000000000000110000010000000001
dc.l %10000000000000100000011000000001
dc.l %10000000000011000000110000000001
dc.l %10000000000010000001111000000001
dc.l %10000000001100000011001000000001
dc.l %10000000001000000111101000000001
dc.l %10000000110000001100101000000001
dc.l %10000000110000011110100000000001
dc.l %10000000111000110010100000000001
dc.l %10000000111101111010000000000001
dc.l %10000000101111001010000000000001
dc.l %10000000100111101000000000000001
dc.l %10000000000010101000000000000001
dc.l %10000000000000100000000000000001
dc.l %10000000000000100000000000000001
dc.l %10000000000000000000000000000001
dc.l %11111111111111111111111111111110
dc.l %01111111111111111111111111110000
dc.l %11111111111111111111111111111000
dc.l %11111111111111111111111111111100
dc.l %11111111111111111111111111111110
dc.l %11111111111111111111111111111111
dc.l %11111111111111111111111111111111
dc.l %11111111111111111111111111111111
dc.l %11111111111111111111111111111111
dc.l %11111111111111111111111111111111
dc.l %11111111111111111111111111111111
dc.l %11111111111111111111111111111111
dc.l %11111111111111111111111111111111
dc.l %11111111111111111111111111111111
dc.l %11111111111111111111111111111111
dc.l %11111111111111111111111111111111
dc.l %11111111111111111111111111111111
dc.l %11111111111111111111111111111111
dc.l %11111111111111111111111111111111
dc.l %11111111111111111111111111111111
dc.l %11111111111111111111111111111111
dc.l %11111111111111111111111111111111
dc.l %11111111111111111111111111111111
dc.l %11111111111111111111111111111111
dc.l %11111111111111111111111111111111
dc.l %11111111111111111111111111111111
dc.l %11111111111111111111111111111111
dc.l %11111111111111111111111111111111
dc.l %11111111111111111111111111111111
dc.l %11111111111111111111111111111111
dc.l %11111111111111111111111111111111
dc.l %11111111111111111111111111111111
dc.l %11111111111111111111111111111110
END
Reference in New Issue Copy Permalink