Macintosh-SW/supermario
1
0
Fork 0
mirror of https://github.com/elliotnunn/supermario.git synced 2024-11-24 17:32:59 +00:00
Code Issues Projects Releases Wiki Activity
master
supermario/base/SuperMarioProj.1994-02-09/OS/IoPrimitives/ImmgPrimitives.a
Elliot Nunn 2e16381318 Bring in sources, and document
2019-06-29 23:17:50 +08:00

1955 lines
72 KiB
Plaintext
Raw Permalink Blame History

;__________________________________________________________________________________________________
;
; File: ImmgPrimitives.a
;
; Contains: Primitive tables and init routines for the internal modem manager
;
; Written by: Steven Swenson
;
; Copyright © 1994-1994 by Apple Computer, Inc. All rights reserved.
;
; Change History (most recent first):
;
; <SM3> 1/26/94 rab Removed padForOverpatch stuff from the end of this file
; (SuperMario does not use it…).
; <SM2> 12/21/93 ged Changed rate11_025khz label to newer rate11025hz definition.
; <H13> 6/1/93 SES Made modifications as per SPI review on 6/1/93. The only real
; change was to vector the command count and receive count table
; pointers through global storage rather than lea's inside the
; mdmPrime routine (prevents someone who wants to patch the count
; tables from having to patch the entire mdmPrime routine). The
; other changes were to add comments, and rearrange a few of the
; EQU's into a more logical grouping.
; <H12> 5/23/93 SES Made changes from code review on 5/19/93.
; <H11> 5/21/93 SES Made the Slot9Handler routine check the status register
; interrupt level mask. If the mask is greater than 2, the
; routine sets the mask down to 2 and then restores it to whatever
; it was. This is to fix a problem that occurs because the Elan
; ethernet driver interrupt handling routine sometimes leaves the
; interrupt mask in the status register at 4 or 6, which causes
; problems on Optimus (when the slot 9 interrupt is really handled
; by the level 3 interrupt handler - if the level 3 handler cannot
; execute, the slot 9 interrupt is not cleared, and an infinite
; loop results).
; <H10> 5/17/93 SES Changed modem sound control and set up primitives. Sound control
; keeps track of when it has been called on and off so that it
; does not do on or off more than once in a row. The set up
; routine initializes the saved input source to none and the saved
; playthru volume to zero.
; <H9> 5/11/93 SES Screwed up! One minor mod needed to happen to make the previous
; fix work, the moveq instruction does not work with that large an
; operand!
; <H8> 5/11/93 SES Made mdmWakeup3615 primitive for Optimus return
; immgInvalidSelector error rather than no error, since the
; routine does not do anything (and in the future, some other
; routine might actually do something).
; <H7> 5/10/93 SES In order to alleviate a possible bus float situation, wrote data
; to the modem ID register instead of the ROMBase, since the IO
; data bus needed to be cleared, not the processor data bus.
; <H6> 5/6/93 SES Altered sound control so that the play through volume is set to
; equal the slider volume during modem sound transactions.
; <H5> 5/4/93 SES Removed machine primitives and replaced them with the dispatch
; functions in the IntModemMgr.a file.
; <H4> 4/27/93 SES Enhanced modem manager and adding primitives as per code review
; on 4/22/93. Moved dispatcher to IntModemMgr.a. Split
; primitives into machine primitives and modem primitives.
; Significantly reduced size of the command and reply lookup
; tables.
; <H3> 4/24/93 SES Played around with how sound is handled on Optimus for the
; modem.
; <H2> 4/15/93 SES Changed Optimus primitives so that machine does not hang when
; powered off. This means that the power control primitive
; disables interrupts from the modem when the modem is "turned
; off." Also implemented the sound control primitive for Optimus
; (hits sound control bit in sound control register. Finally,
; altered the structure of the primitives table to have an offset
; to the next modem table, effectively creating a linked list of
; modem tables so that they do not have to be physically
; contiguous in memory.
; <1> 4/8/93 SES first checked in
; <H1> 4/8/93 SES First checked in
;__________________________________________________________________________________________________
LOAD 'StandardEqu.d'
INCLUDE 'HardwarePrivateEqu.a'
INCLUDE 'UniversalEqu.a'
INCLUDE 'ROMEqu.a'
INCLUDE 'IOPrimitiveEqu.a'
INCLUDE 'IntModemMgrEqu.a'
INCLUDE 'IntModemMgrPrivEqu.a'
INCLUDE 'PowerPrivEqu.a'
INCLUDE 'Sound.a'
MACHINE MC68020 ; <H3>
STRING ASIS
;••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
;••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
; BEGIN OPTIMUS MODEM PRIMITIVES
;••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
;••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
;----------------------------------------------------------------------------------------
; Equates for Optimus modem primitives
;----------------------------------------------------------------------------------------
OptMdmBase equ $50F09000
; Optimus modem address offsets
OptSPIMdmCtl EQU $000
OptSndCtl EQU $400
OptSPISftReg EQU $800
OptLmpSftCtl EQU $C00
OptMdmIDReg EQU $FFC
; Optimus OptSPIMdmCtl bit definitions
OptSPIMdmId EQU 0 ; (1 = SPI modem connected)
OptSPIAck EQU 2 ; (1 = ack idle)
OptSPIReq EQU 3 ; (1 = req idle)
OptSPIIrq EQU 4 ; (1 = interrupting)
OptRingDet EQU 5 ; ring detect bit
; Optimus OptLmpSftCtl bit definitions
OptLmpSPIDir EQU 4 ; shift direction control bit
; Optimus OptSndCtl bit definitions
bOptIntMask EQU 0
bOptSndMask EQU 1
; Bit definitions for the power manager status bits for modem
bPMMdmPower EQU 0 ; Modem power
bPMRingWakeUp EQU 2 ; Ring wake up enable
bPMMdmInstall EQU 3 ; Modem installed
bPMRingDet EQU 4 ; Ring detect
; equ for Optimus slot interrupt hack
OptHackSlotNum EQU 9 ; slot number for interrupt handler
; equ's for dummy slot 9 interrupt handler hack fix of Elan ethernet interrupt handler bug
statMaskBits EQU $0700 ; mask for status bits in SR
level3Bits EQU $0300 ; bits for checking level 3 and above mask in SR
level2Bits EQU $0200 ; bits for setting mask in SR to level 2
;----------------------------------------------------------------------------------------
; Equates for Baby Rock modem primitives
;----------------------------------------------------------------------------------------
;----------------------------------------------------------------------------------------
; Private storage data structures for 3615 primitives
;----------------------------------------------------------------------------------------
immg3615Rec RECORD 0
ModemType DS.L 1 ; ID of installed modem
ModemBase DS.L 1 ; base address of the modem
Slot9Addr DS.L 1 ; pointer to slot 9 handler queue element
SndInputSrc DS.B 1 ; saved sound input source ; <H3>
PlayThruVol DS.B 1 ; saved sound playthrough volume ; <H3>
PreviousCmd DS.W 1 ; the last command executed through the call; <H10>
SendTable DS.L 1 ; pointer to modem prime send table
RecvTable DS.L 1 ; pointer to modem prime receive table
size EQU *-immg3615Rec ; size of record
ENDR
immg3615SlotQEl RECORD 0
sqLink DS.L 1 ; link address
sqType DS.W 1 ; type of queue element
sqPrio DS.W 1 ; priority
sqAddr DS.L 1 ; address of handler
sqParm DS.L 1 ; optional A1 pointer
sqInt9Count DS.L 1 ; number of times in slot 9 interrupt
sqInt3Count DS.L 1 ; number of times in level 3 interrupt
size EQU *-immg3615SlotQEl ; size of record
ENDR
;----------------------------------------------------------------------------------------
; Private storage data structures for Baby Rock primitives
;----------------------------------------------------------------------------------------
immgBabyRockRec RECORD 0
ModemType DS.L 1 ; ID of installed modem
ModemBase DS.L 1 ; base address of the modem
SndMonState DS.W 1 ; current modem sound monitoring state
SndMonVolume DS.W 1 ; current modem sound volume level
size EQU *-immgBabyRockRec ; size of record
ENDR
ImmgPrim PROC
EXPORT ImmgBabyRock
ImmgBabyRock
;----------------------------------------------------------------------------------------
; ROM root table structure for modem manager initialization for BabyRock Modem in Blackbird.
; See IntModemMgrPrivEqu.a for the structure that is built below
;----------------------------------------------------------------------------------------
immgMdmListHeadBabyRock
DC.L mdmPrimsBabyRock ; offset to the BabyRock primitives
DC.L 0 ; no further modems supported
EndImmgBabyRock
mdmPrimsBabyRock
DC.W 0 ; flags
DC.W 0 ; number of primitives (filled in at init time)
DC.L mdmTypeBabyRock-mdmPrimsBabyRock ; offset to modem type routine
DC.L mdmPowerBabyRock-mdmPrimsBabyRock ; offset to modem power routine
DC.L mdmWakeupBabyRock-mdmPrimsBabyRock ; offset to modem wakeup on ring control routine
DC.L mdmStatusBabyRock-mdmPrimsBabyRock ; offset to modem status routine
DC.L mdmPrimeBabyRock-mdmPrimsBabyRock ; offset to modem prime routine
DC.L mdmSndCtlBabyRock-mdmPrimsBabyRock ; offset to modem sound control routine
DC.L mdmExistsBabyRock-mdmPrimsBabyRock ; offset to modem exists routine
DC.L mdmSetUpBabyRock-mdmPrimsBabyRock ; offset to modem set up routine
DC.L mdmTearDownBabyRock-mdmPrimsBabyRock; offset to modem tear down routine
DC.L mdmNameBabyRock-mdmPrimsBabyRock ; offset to modem name routine
DC.L mdmSndVolBabyRock-mdmPrimsBabyRock ; offset to modem sound volume routine
DC.L mdmSndHWBabyRock-mdmPrimsBabyRock ; offset to system sound arbitration routine
;----------------------------------------------------------------------------------------
; mdmTypeBabyRock
;
; Entry: a1 = modem primitive global pointer
;
; Exit: d0 = result code
; a0 = modem type
;
; Trashes: none
;
; Returns the modem type stored in global storage.
;----------------------------------------------------------------------------------------
mdmTypeBabyRock
WITH PowerDispRec,PMgrHookDispRec
MOVE.L #(PModemType<<16)|\
(PMgrHookDisp<<0),D0 ; get the modem type
_PowerDispatch
MOVEA.L D0,A0 ; return modem type
MOVEQ #noErr,D0 ; never any errors
RTS
ENDWITH
;----------------------------------------------------------------------------------------
; mdmPowerBabyRock
;
; Entry: a0 = modem manager param block pointer
; a1 = modem primitives global pointer
;
; Exit: d0 = no error
;
; Trashes: none
;
;----------------------------------------------------------------------------------------
mdmPowerBabyRock
WITH immgParamBlock
MOVE.B #%00001000,D0 ; select power cmd on channel C
TST.W immgCommand(a0) ; IF Power Off Modem THEN
BNE.S @CallSerPwr ; .
ORI.B #(1<<7),D0 ; Set Power Off Bit
@CallSerPwr _SerialPower ; Call Serial Power
RTS
ENDWITH
;----------------------------------------------------------------------------------------
; mdmWakeupBabyRock
;
; Entry: a0 = modem manager param block pointer
; a1 = modem primitives global pointer
;
; Exit: d0 = result code
;
; Trashes: none
;
; Returns immgInvalidSelector error, while we wait for PG&E to …
; support wake up on ring. There is no software to take advantage of the wake up on ring
; feature at the present time. This routine returns an error so that when software
; becomes available that can take advantage of wake up on ring, it can check the return
; result from this function to determine if the desired behavior has taken place.
;----------------------------------------------------------------------------------------
mdmWakeupBabyRock
MOVE.W #immgInvalidSelector,D0 ; no good
RTS
;----------------------------------------------------------------------------------------
; mdmStatusBabyRock
;
; Entry: a0 = modem manager param block pointer
; a1 = modem primitives global pointer
;
; Exit: d0 = result code
;
; Trashes: none
;
; Constructs status byte from various sources.
;----------------------------------------------------------------------------------------
mdmStatusBabyRock
BRA DoPmgrCmd ; run through the Pmgr
;----------------------------------------------------------------------------------------
; mdmPrimeBabyRock
;
; Entry: a0 = modem manager param block pointer
; a1 = modem primitives global pointer
;
; Exit: d0 = result code
;
; Trashes: none
;
;
; Sends and receives bytes to/from the modem.
;
; Processor interrupts are masked during this command. The SCC data is polled during the
; call and the data is stored on the stack. Great pains are taken to keep the stack clear
; for the SCC data. At the end of the call, the PollProc is called to remove the SCC data
; from the stack.
;
; Interrupts can be disabled by this routine for an indeterminate amount of time. In
; practice, the call takes no more than about 4ms. The time out value for the communication
; of one byte of data to or from the modem is 32ms. It is therefore theoretically possible
; that in a worst case scenario, say some hardware problem where the communication to and
; from the modem takes 31ms, and there are 100 bytes to receive from the modem, that
; interrupts would be disabled for 3.1sec! This problem is left to future authors of the
; primitive.
;
; SPI stands for Serial Port Interface, and is a standard interface specification for
; the Motorola 6805 microcontroller.
;
; There is no attempt by this primitive to recover from any errors that may be encountered
; during the sending or receiving of bytes to/from the modem. If an error does occur, it
; is reported, but the hardware may not be in the expected state.
;
; Pointers to the send and receive count tables are stored in the mdmSetUp routine above.
; This is done so that patching the tables is easy.
;----------------------------------------------------------------------------------------
mdmPrimeBabyRock
DoPmgrCmd
_PMgrOp
RTS
;------------------------------------------------------------------------------------------------
; mdmSndCtlBabyRock
;
; Entry: a0 = modem manager param block pointer
; a1 = modem primitives global pointer
;
; Exit: d0 = result code
;
; Trashes: none
;
; Control modem sound for the BabyRock modem. The caller can either enable or disable the modem
; sound channel. Note that this channel is a software channel that sends DMA'ed (is that an
; adjective?) sound samples from the modem to the sound manager. The relative volume of that
; channel is controlled via the mdmSndVolBabyRock primitive.
;------------------------------------------------------------------------------------------------
mdmSndCtlBabyRock
WITH immgParamBlock,immgBabyRockRec
@savedRegs REG d1
movem.l @savedRegs,-(sp) ; save registers
move.w immgCommand(a0),d1 ; D1 -> sound command to process
@chkOnOff cmpi.w #immgSndOff,d1 ; check for sound monitoring on/off
beq.s @valid
cmpi.w #immgSndOn,d1
beq.s @valid
@undefined bra.s @done ; sound command unrecognized, leave
@valid cmp.w SndMonState(a1),d1 ; is modem sound already in this state?
beq.s @done ; if so, then we're done…
cmpi.w #immgSndOn,d1
bne.s @turnOff
@turnOn ; Add Codec programming, not done by primitive code
; Set codec interface to TCM320AC36
move.b #2,HardRockCodecICR
; Set sample rate to SCLK * 256 (i.e. singer clock)
move.b #1,HardRockCodecSRCR
; Enable codec
move.b #1,HardRockCodecEnReg
; Call interface code
move.l #immgSndOn,-(sp)
bsr ModemSoundCntl
addq #4,sp
bne.s @noGood
bra.s @logIt
@turnOff move.l #immgSndOff,-(sp)
bsr ModemSoundCntl
addq #4,sp
bne.s @noGood
@logIt move.w d1,SndMonState(a1) ; save state for next time
@noGood ;not much we can do since the interface does not allow an error return, at least
;we don't set the SndMonState field incorrectly - so future calls have a shot at
;working (of course this shouldn't happen, but…)
@done moveq #noErr,d0
movem.l (sp)+,@savedRegs ; restore registers
@exit rts
ENDWITH
;___________________________________________________________________________________________
;
; Modem Hardware Info Structure
;
; Used to store pass information about the modem sound hardware until we get the
; Internal Modem Manager on-line (so that we can handle various modem hardware during
; development).
;___________________________________________________________________________________________
ModemHWInfo RECORD 0
Flags DS.B 1 ; bit flags specifying various modem HW modes
reserved1 DS.B 1 ; reserved for future use
mSrcSampleRate DS.L 1 ; modem sound source sample rate (unsigned fixed)
reserved2 DS.L 1 ; reserved for future use
reserved3 DS.L 1 ; reserved for future use
reserved4 DS.L 1 ; reserved for future use
ModemHWInfoSize EQU * ; size of ModemHWInfo
ENDR
; =====================================================================
;
; void ModemSoundCntl(Boolean enable);
;
; calls the custom sound primitive to enable/disable modem sound
;
; NOTE: The sample rate passed in the ModemHWInfo structure field must
; be in unsigned fixed format. This format is the same as that
; described in IM1 except the msb is not interpreted as a
; sign bit (e.g. AC440000 is 44,100 and NOT -21,436).
;
; NOTE2: Make sure the CODEC interface has been set up correctly
; before calling this routine (we don't touch it).
;
; =====================================================================
HrClockSrcBit EQU 0 ; bit is one if using external clock, zero if using Singer clk
ModemSoundCntl
ModemSndFrame RECORD {A6Link},DECR
enable DS.L 1
return DS.L 1
A6Link DS.L 1
reserved DS.L 1
LocalSize EQU *
ENDR
@savedRegs reg d0-d3/a0-a1
WITH ModemHWInfo,ModemSndFrame,ExpandMemRec
link a6,#LocalSize ; set up stack frame
movem.l @savedRegs,-(sp)
@gotIt moveq #ModemHWInfoSize,d0 ; allocate *TEMPORARY* pass-in structure
_NewPtr ,SYS,CLEAR
bne.s @done
movea.l a0,a1
;********************* SET HARDWARE CALL MONITORING ATTRIBUTES HERE *********************
;bset #HrClockSrcBit,Flags(a1) ; flag external clock for HardRock CODEC
bclr #HrClockSrcBit,Flags(a1) ; flag Singer clock for HardRock CODEC
move.l #rate11025hz,mSrcSampleRate(a1) ; set sample rate in unsigned fixed format
moveq #sndModemSndOff,d0 ; assume modem sound off
tst.l enable(a6) ; see what the caller wants
beq.s @execute ; we guessed right, so execute primitive
moveq #sndModemSndOn,d0 ; no, select modem sound on
@execute movea.l ([ExpandMem],emSndPrimitives),a0 ; get the address of the sound primitive table
move.l sndModemSound*4(a0),d1 ; is there a handler?
beq.s @leave ; no, just exit
move.l d1,a0
jsr (a0) ; call the ioprimitive
bne.s @primFailed
@primOK clr.w d3 ; save passed value for later check
bra.s @leave
@primFailed moveq #-1,d3 ; save error value for later check
@leave movea.l a1,a0
_DisposPtr ; get rid of *TEMPORARY* pass-in structure
@done movem.l (sp)+,@savedRegs
unlk a6
rts
ENDWITH
; ===================================================================== ;
;
; Boolean Error ModemHWCntl(Boolean enable);
;
; calls the custom sound primitive to Grab/Release modem sound hardware
;
; ===================================================================== ;
ModemHWCntl
ModemHWCFrame RECORD {A6Link},DECR
enable DS.L 1
return DS.L 1
A6Link DS.L 1
reserved DS.L 1
LocalSize EQU *
ENDR
@savedRegs reg d0-d2/a0-a1
WITH ModemHWCFrame,ExpandMemRec
link a6,#LocalSize ; set up stack frame
movem.l @savedRegs,-(sp)
moveq #sndReleaseHW,d0 ; assume modem sound release
tst.l enable(a6) ; see what the caller wants
beq.s @execute ; we guessed right, so execute primitive
moveq #sndGrabHW,d0 ; no, select modem sound grab
@execute movea.l ([ExpandMem],emSndPrimitives),a0 ; get the address of the sound primitive table
move.l sndSoundHWCntl*4(a0),d1 ; is there a handler?
beq.s @done ; no, just exit
move.l d1,a0
jsr (a0) ; call the ioprimitive
bne.s @problem
moveq #0,d0 ; flag that call was successful
bra.s @done
@problem moveq #1,d0 ; flag that call did not succeed
@done movem.l (sp)+,@savedRegs
unlk a6
rts
ENDWITH
;----------------------------------------------------------------------------------------
; mdmExistsBabyRock
;
; Entry: none
;
; Exit: d0 = result code
;
; Trashes: none
;
; Check if a BabyRock modem is installed in the box.
;----------------------------------------------------------------------------------------
mdmExistsBabyRock
WITH PowerDispRec,PMgrHookDispRec
MOVE.L #(PModemType<<16)|\
(PMgrHookDisp<<0),D0 ; get the modem type
_PowerDispatch
TST.W D0 ;
BEQ.S @noModem
MOVEQ #noErr,D0 ; indicate modem exists
RTS
@noModem
MOVE.W #immgNoBoardErr,d0 ; indicate no board
RTS
ENDWITH
;----------------------------------------------------------------------------------------
; mdmSetUpBabyRock
;
; Entry: none
;
; Exit: d0 = result code
; a0 = pointer to modem primitives globals
;
; Trashes: none
;
; Set up the primitives for the 3615 modem.
;----------------------------------------------------------------------------------------
mdmSetUpBabyRock
@savedRegs REG a1-a3
movem.l @savedRegs,-(sp) ; save registers
WITH immgBabyRockRec
; allocate private storage for modem primitives
move.l #immgBabyRockRec.size,d0 ; get size of private storage
_NewPtr ,SYS,CLEAR ; get a pointer in the system heap ; <H10>
tst.w d0 ; check for errors
bne.w @error1 ; if no memory, cannot continue
movea.l a0,a3 ; a3 = pointer to private storage
movea.l #HardRockSlotBase,a2 ; get base address of modem
move.l a2,ModemBase(a3) ; store base address
movea.l #FIFOMEM_BASE,a0 ; set up the HardRock FIFO bases (for DMA)
IMPORT GetRealProc
bsr.l GetRealProc
movea.l a0,a1
adda.l #FIFO_0_OFFSET,a1
move.l a1,HardRockFifoBase0
movea.l a0,a1
adda.l #FIFO_1_OFFSET,a1
move.l a1,HardRockFifoBase1
movea.l a0,a1
adda.l #FIFO_2_OFFSET,a1
move.l a1,HardRockFifoBase2
WITH PowerDispRec,PMgrHookDispRec
MOVE.L #(PModemType<<16)|\
(PMgrHookDisp<<0),D0 ; get the modem type
_PowerDispatch
ENDWITH
move.l d0,ModemType(a3) ; store the modem type in private storage
move.w #immgSndOff,SndMonState(a3) ; initialize state variables to track modem sound
move.w #$FF,SndMonVolume(a3) ; initialize modem sound volume (to full)
movea.l a3,a0 ; return pointer to primitives globals
moveq #noErr,d0 ; no error
@exit movem.l (sp)+,@savedRegs ; restore registers
rts
; indicate initialization error
@error1 move.w #immgInitError,d0 ; bad...
bra.s @exit
ENDWITH
;----------------------------------------------------------------------------------------
; mdmTearDownBabyRock
;
; Entry: a1 = pointer to modem primitives globals
;
; Exit: d0 = no error
;
; Trashes: none
;
; Deallocates everything that the set up routine allocated and sets PrimeTime so that
; no modem interrupts are generated.
;----------------------------------------------------------------------------------------
mdmTearDownBabyRock
WITH immgBabyRockRec
; deallocate private storage for modem primitives
movea.l a1,a0 ; A0 -> pointer to private storage
_DisposPtr
moveq #noErr,d0 ; no error
@exit rts
ENDWITH
;----------------------------------------------------------------------------------------
; mdmNameBabyRock
;
; Entry: a0 = pointer to string buffer
; a1 = pointer to modem primitives globals
;
; Exit: d0 = no error
; a0 = pointer to null terminated string
;
; Trashes: A1
;
; Returns the name of the modem.
;----------------------------------------------------------------------------------------
mdmNameBabyRock
MOVE.L A0,-(sp) ; save pointer
MOVEA.l A0,A1 ; destination
LEA @modemName,A0 ; source (skip over length byte)
@loop MOVE.B (A0)+,(A1)+ ; copy one byte
BNE.S @loop ; keep copying until null terminal byte is copied
MOVEA.L (SP)+,A0 ; return modem name in A0
MOVEQ #noErr,D0 ; no error
@exit RTS
@modemName DC.B 'Baby Rock'
DC.B 0
ALIGN 2
;----------------------------------------------------------------------------------------
; mdmSndVolBabyRock
;
; Entry: a0 = modem manager param block pointer
; a1 = modem primitives global pointer
;
; Exit: d0 = result code
;
; Trashes: none
;
; Controls the volume of the modem sound channel relative to the overall hardware sound
; level.
;----------------------------------------------------------------------------------------
mdmSndVolBabyRock
WITH immgParamBlock,immgBabyRockRec,ExpandMemRec
@savedRegs REG a0/d1
movem.l @savedRegs,-(sp) ; save registers
move.w immgCommand(a0),d1 ; D1 -> sound command to process
@chkCmd cmpi.w #immgVolSet,d1 ; dispatch to appropriate code…
beq.s @setVol
cmpi.w #immgVolRead,d1
beq.s @readVol
@undefined bra.s @badCmd ; sound command unrecognized, leave
@setVol cmpi.w #2,immgLength(a0) ; verify the volume parameter format
bne.s @formatErr
move.w ([immgSBuffer,a0]),d0 ; get volume level to set
movea.l ([ExpandMem],emSndPrimitives),a0 ; get the address of the sound primitive table
move.l sndModemSndVol*4(a0),d1 ; is there a handler?
beq.s @problemo ; no, so bail
move.l d1,a0
jsr (a0) ; call the snd primitive
bne.s @problemo ; bail if the primitive returns an error
move.w d0,SndMonVolume(a1) ; save current modem sound level (for later read calls)
bra.s @normal
@readVol move.w #2,immgLength(a0) ; set up for volume parameter return
tst.l immgRBuffer(a0) ; be paranoid and make sure a return buff ptr is present
beq.s @formatErr
move.w SndMonVolume(a1),([immgRBuffer,a0])
bra.s @normal
@problemo move.w #immgCommandError,d0 ; signals a generic problem with command execution
bra.s @exit
@formatErr move.w #immgSendEndErr,d0 ; simulate a data transfer error
bra.s @exit
@badCmd move.w #immgInvalidCommand,d0
bra.s @exit
@normal moveq #noErr,d0
@exit movem.l (sp)+,@savedRegs ; restore registers
rts
ENDWITH
;----------------------------------------------------------------------------------------
; mdmSndHWBabyRock
;
; Entry: a0 = modem manager param block pointer
; a1 = modem primitives global pointer
;
; Exit: d0 = result code
;
; Trashes: none
;
; Allows the caller to negotiate/release exclusive control of the sound hardware.
;----------------------------------------------------------------------------------------
mdmSndHWBabyRock
WITH immgParamBlock,immgBabyRockRec,ExpandMemRec
@savedRegs REG a0-a1/d1
movem.l @savedRegs,-(sp) ; save registers
move.w immgCommand(a0),d1 ; D1 -> sound command to process
@chkCmd cmpi.w #immgSndRelease,d1 ; dispatch to appropriate code…
beq.s @valid
cmpi.w #immgSndTakeover,d1
beq.s @valid
@undefined bra.s @badCmd ; sound command unrecognized, leave
@valid movea.l ([ExpandMem],emSndPrimitives),a1 ; get the address of the sound primitive table
move.l sndSoundHWState*4(a1),d0 ; is there a handler?
beq.s @problemo ; no, so bail
move.l d0,a1
jsr (a1) ; call the snd primitive
bne.s @problemo ; bail if the primitive returns an error
cmpi.w #immgSndRelease,d1 ; see if command makes sense given current HW state
bne.s @isGrabOK
@isRlseOK cmpi.b #sndReleaseHW,d0
beq.s @problemo ; (bail if command is release and we are already released)
bra.s @tryRelease
@isGrabOK cmpi.b #sndReleaseHW,d0
bne.s @problemo ; (bail if command is grab and HW is already "grabbed")
@tryGrab move.w #sndGrabHW,d0
bra.s @arbitrate
@tryRelease move.w #sndReleaseHW,d0
@arbitrate movea.l ([ExpandMem],emSndPrimitives),a1 ; get the address of the sound primitive table
move.l sndSoundHWCntl*4(a1),d1 ; is there a handler?
beq.s @problemo ; no, so bail
move.l d1,a1
jsr (a1) ; call the snd primitive
bne.s @arbFailed
@arbGood move.w #immgArbOK,d1
bra.s @normal
@arbFailed move.w #immgArbFailed,d1
@normal moveq #noErr,d0
bra.s @report
@problemo move.w #immgCommandError,d0 ; signals a generic problem with command execution
move.w #immgArbFailed,d1
bra.s @report
@badCmd move.w #immgInvalidCommand,d0
move.w #immgArbFailed,d1
@report move.w #2,immgLength(a0)
tst.l immgRBuffer(a0) ; be paranoid and check for receive buffer ptr
beq.s @formatErr
move.w d1,([immgRBuffer,a0])
bra.s @exit
@formatErr move.w #immgRecvEndErr,d0 ; simulate a data transfer error
@exit movem.l (sp)+,@savedRegs ; restore registers
rts
ENDWITH
EXPORT ImmgOptimus
ImmgOptimus
;----------------------------------------------------------------------------------------
; ROM root table structure for modem manager initialization for Optimus.
; See IntModemMgrPrivEqu.a for the structure that is built below
;----------------------------------------------------------------------------------------
immgMdmListHeadOpt
DC.L mdmPrims3615-immgMdmListHeadOpt ; offset to 3615 primitives
DC.L 0 ; no further modems supported
EndImmgOptimus
mdmPrims3615
DC.W 0 ; flags
DC.W 0 ; number of primitives (filled in at init time)
DC.L mdmType3615-mdmPrims3615 ; offset to modem type routine
DC.L mdmPower3615-mdmPrims3615 ; offset to modem power routine
DC.L mdmWakeup3615-mdmPrims3615 ; offset to modem wakeup on ring control routine
DC.L mdmStatus3615-mdmPrims3615 ; offset to modem status routine
DC.L mdmPrime3615-mdmPrims3615 ; offset to modem prime routine
DC.L mdmSndCtl3615-mdmPrims3615 ; offset to modem sound control routine
DC.L mdmExists3615-mdmPrims3615 ; offset to modem exists routine
DC.L mdmSetUp3615-mdmPrims3615 ; offset to modem set up routine
DC.L mdmTearDown3615-mdmPrims3615 ; offset to modem tear down routine
DC.L mdmName3615-mdmPrims3615 ; offset to modem name routine
DC.L mdmSndVol3615-mdmPrims3615 ; offset to modem sound volume routine
DC.L mdmSndHW3615-mdmPrims3615 ; offset to system HW arbitration routine
;----------------------------------------------------------------------------------------
; mdmType3615
;
; Entry: a1 = modem primitive global pointer
;
; Exit: d0 = result code
; a0 = modem type
;
; Trashes: none
;
; Returns the modem type stored in global storage.
;----------------------------------------------------------------------------------------
mdmType3615
WITH immg3615Rec
move.l ModemType(a1),a0 ; A0 -> modem type from private storage
moveq #noErr,d0 ; no error
rts
ENDWITH
;----------------------------------------------------------------------------------------
; mdmPower3615
;
; Entry: a0 = modem manager param block pointer
; a1 = modem primitives global pointer
;
; Exit: d0 = no error
;
; Trashes: none
;
; The express modem on Optimus cannot be turned on and off like the express modem on the
; portables. Thus this routine disables interrupts from the modem to simulate the modem
; power being turned off, and enables interrupts from the modem to simulate the modem
; power being turned on.
;----------------------------------------------------------------------------------------
mdmPower3615
WITH immg3615Rec, immgParamBlock
move.l a2,-(sp) ; save a2
movea.l ModemBase(a1),a2 ; base address of modem
move.b OptSndCtl(a2),d0 ; get the current status
bclr #bOptIntMask,d0 ; assume power on, unmask interrupts
tst.w immgCommand(a0) ; check power on or off ; <H10>
bne.s @commonExit
bset #bOptIntMask,d0 ; mask interrupts
@commonExit move.b d0,OptSndCtl(a2) ; set the status
move.l (sp)+,a2 ; restore a2
moveq #noErr,d0
rts
ENDWITH
;----------------------------------------------------------------------------------------
; mdmWakeup3615
;
; Entry: a0 = modem manager param block pointer
; a1 = modem primitives global pointer
;
; Exit: d0 = result code
;
; Trashes: none
;
; Returns immgInvalidSelector error, since the express modem on Optimus does not currently
; support wake up on ring. There is no software to take advantage of the wake up on ring
; feature at the present time. This routine returns an error so that when software
; becomes available that can take advantage of wake up on ring, it can check the return
; result from this function to determine if the desired behavior has taken place.
;----------------------------------------------------------------------------------------
mdmWakeup3615
WITH immg3615Rec
move.w #immgInvalidSelector,d0 ; <H8>
rts
ENDWITH
;----------------------------------------------------------------------------------------
; mdmStatus3615
;
; Entry: a0 = modem manager param block pointer
; a1 = modem primitives global pointer
;
; Exit: d0 = result code
;
; Trashes: none
;
; Constructs status byte from various sources.
;----------------------------------------------------------------------------------------
mdmStatus3615
WITH immgParamBlock
moveq #(1<<bPMMdmPower) | \ ; modem is on
(1<<bPMRingWakeUp) | \ ; ring wakeup is enabled
(1<<bPMMdmInstall),d0 ; modem is installed
btst.b #OptRingDet,OptMdmBase+OptSPIMdmCtl ; test if ring detect is set
beq.s @noRingDet
moveq #(1<<bPMMdmPower) | \ ; modem is on
(1<<bPMRingWakeUp) | \ ; ring wakeup is enabled
(1<<bPMMdmInstall) | \ ; modem is installed
(1<<bPMRingDet),d0 ; ring detect is set
@noRingDet move.w #1,immgLength(a0) ; set the length to one byte
move.l immgRBuffer(a0),a0 ; A0 -> pointer to receive buffer
move.b d0,(a0) ; put the status into the return buffer
move.w #noErr,d0 ; set error code
rts
ENDWITH
;----------------------------------------------------------------------------------------
; mdmPrime3615
;
; Entry: a0 = modem manager param block pointer
; a1 = modem primitives global pointer
;
; Exit: d0 = result code
;
; Trashes: none
;
; Uses:
; D0: scratch register, result code
; D1: high word: scratch; low word: command number
; D2: scratch (by lower level routines)
; D3: scratch
; D4: scratch
; D5: scratch
; D6: high word: contents of status register; low word: scratch
; D7: stack base for poll stack
;
; A0: modem manager parameter block pointer
; A1: scratch, VIA 1 base
; A2: modem base address
; A3: scratch (by lower level routines, return address)
; A4: scratch (by lower level routines, return address)
; A5: pointer to immg3615Rec, not valid after UnloadPollStack
; A6: pointer to SCC channel A data register
; A7: stack pointer, pollstack pointer
;
; Sends and receives bytes to/from the modem.
;
; Processor interrupts are masked during this command. The SCC data is polled during the
; call and the data is stored on the stack. Great pains are taken to keep the stack clear
; for the SCC data. At the end of the call, the PollProc is called to remove the SCC data
; from the stack.
;
; Interrupts can be disabled by this routine for an indeterminate amount of time. In
; practice, the call takes no more than about 4ms. The time out value for the communication
; of one byte of data to or from the modem is 32ms. It is therefore theoretically possible
; that in a worst case scenario, say some hardware problem where the communication to and
; from the modem takes 31ms, and there are 100 bytes to receive from the modem, that
; interrupts would be disabled for 3.1sec! This problem is left to future authors of the
; primitive.
;
; SPI stands for Serial Port Interface, and is a standard interface specification for
; the Motorola 6805 microcontroller.
;
; There is no attempt by this primitive to recover from any errors that may be encountered
; during the sending or receiving of bytes to/from the modem. If an error does occur, it
; is reported, but the hardware may not be in the expected state.
;
; Pointers to the send and receive count tables are stored in the mdmSetUp routine above.
; This is done so that patching the tables is easy.
;----------------------------------------------------------------------------------------
mdmPrime3615
immgrPollRegs REG D3/D4/D5/D6/A0/A1/A2/A4 ; registers to save across pollproc call
@numPollRegs EQU 4+4 ; number of registers to save across pollproc call
@savedRegs REG D1-D7/A0-A6 ; registers saved across this routine
movem.l @savedRegs,-(SP) ; save working registers
move.w sr,d6 ; save the entry SR in the upper half of D6
swap d6
WITH immgParamBlock
movea.l immg3615Rec.ModemBase(a1),a2 ; point to modem base address
movea.l a1,a5 ; save pointer to immg3615Rec
; disable interrupts during the time of this call
ori #HiIntMask,sr ; no interrupts
; set up for SCC polling...
lea -4*@numPollRegs(sp),sp ; allocate space for registers saved if we call PollProc
move.l sp,d7 ; point to the stack top for our SCC poll stack
movea.l SccRd,a6 ; point to the SCC channel A's data register <H26>
addq.w #aData,a6 ; <H26>
tst.l PollProc ; is a poll proc installed? <H52>
bne.s @WillPoll ; -> yes <H52>
; the offset +sccData is added to the address below because the routines that read the
; scc data out of the address subtract sccData from the base of the scc when reading data.
; See WaitSPIAckHi and WaitSPIAckLo below.
lea @NoPollSCC+sccData,a6 ; no, avoid collecting bytes no one will use <H52>
@WillPoll
; ----- send command and count ----
move.w immgCommand(a0),d3
move.w d3,d1
bsr SendSPI ; send command byte
bne.s @ImmgOpExit ; exit if error returned <H24>
movea.l immg3615Rec.SendTable(a5),a1 ; and get the send count table <H21>
move.w immgLength(a0),d5 ; pop the count into d5
bsr GetLenCount ; D0 -> number of bytes to send, -1 for dynamic
bpl.s @noCount ; if positive, no count
move.w d5,d1
bsr SendSPI ; send count byte
bne.s @ImmgOpExit ; exit if error returned <H24>
; ----- send data ----
@noCount movea.l immgSBuffer(a0),a1 ; get the pointer to the command's data bytes
moveq #0,d1 ; (set CCR for BEQ so DBNE below won't fall thru)
bra.s @StartSend
@SendData move.b (a1)+,d1 ; get the next data byte
bsr SendSPI ; and send it
@StartSend dbne d5,@SendData ; -> more bytes to send
bne.s @ImmgOpExit ; -> error
; ----- receive data -----
movea.l immg3615Rec.RecvTable(a5),a1 ; and get the receive count table <H21>
bsr GetLenCount ; D0 -> number of bytes to send, -1 for dynamic
move.b d1,d3
bmi.s @readReplyCount ; (<0)
cmp.b #1,d3 ; test against 1
ble.s @readData ; if ( =0 or =1 ) go to read
subq #1,d3 ; (>1) correct count
bra.s @readData ; if 0 or 1 go to read
@readReplyCount
bsr ReceiveSPI ; read first byte for receive count
bne.s @ImmgOpExit ; exit if error returned <H24>
move.b d1,d3 ; move count into d3
@readData ; d4 has receive byte count
movea.l immgRBuffer(a0),a1 ; a1 new points
move.w d3,immgLength(a0) ;
bra.s @StartReceive ; start receiving data
@ReceiveByte
bsr ReceiveSPI ; read a byte into d1
bne.s @ImmgOpExit ; -> error
move.b d1,(a1)+ ; move data byte into buffer
@StartReceive
dbra d3,@ReceiveByte ; -> more bytes to send
@ImmgOpExit
; check if any SCC bytes were collected so we can send them to the serial driver...
move.l d0,d4 ; save return result
movea.l VIA,a1 ; point to VIA1
bsr UnloadPollstack ; unload any SCC data stashed while interrupts were disabled
lea 4*@numPollRegs(sp),sp ; de-allocate PollProc saved register frame
move.l d4,d0 ; restore return result
; clean everything up...
swap d6
move.w d6,sr
tst.l d0 ; to set condition codes
@exit movem.l (sp)+,@savedRegs ; restore working registers
rts
ENDWITH
@NoPollSCC dc.w 0 ; A6 points here if no PollProc to avoid stack overflow <H52>
;———————————————————————————————————————————————————————————————————————————————— <H24>
; Routine: WaitSPIAckHi
;
; Input: a2.l - pointer to modem base
; a6 - pointer to serialpoll data area
;
; Destroys: d2,d1,a3
;
; Returns d0.b - 0 = ok, non-zero = error
;
; Function: wait for SPI ack high
;———————————————————————————————————————————————————————————————————————————————— <H24>
WaitSPIAckHi
move.l (sp)+,a3 ; pop return address into a3 <37>
move.w #32,d2 ; loop to max 32 msec
@nextmsec
move.w timedbra,d1 ; 1 msec count
@waitAckhi
btst.b #RxCA,-sccData(A6) ; SCC data available? <37>
beq.s @WaitLoop ; <37>
move.b (A6),-(SP) ; yes, push it on the stack <37>
@WaitLoop ; <37>
btst.b #OptSPIAck,OptSPIMdmCtl(a2) ; test ack
dbne d1,@waitAckhi ; loop for upto 1 msec
dbne d2,@nextmsec ; loop for d2 msec
seq d0 ; set result (d0 <> 0 = error), bit lo
tst.b d0 ; set the condition codes <H26>
jmp (a3) ; return through a3 <37>
;———————————————————————————————————————————————————————————————————————————————— <H24>
; Routine: WaitSPIAckLo
;
; Input: a2 - pointer to modem base
; a6 - pointer to serialpoll data area
;
; Destroys: d2,d1,a3
;
; Returns d0 - 0 = ok, non-zero = error
;
; Function: wait for SPI ack lo
;
;———————————————————————————————————————————————————————————————————————————————— <H24>
WaitSPIAckLo
move.l (sp)+,a3 ; pop return address into a3 <37>
move.w #32,d2 ; loop to max 32 msec
@nextmsec
move.w timedbra,d1 ; 1 msec count
@waitAckhi
btst.b #RxCA,-sccData(A6) ; SCC data available? <37>
beq.s @WaitLoop ; <37>
move.b (A6),-(SP) ; yes, push it on the stack <37>
@WaitLoop ; <37>
btst.b #OptSPIAck,OptSPIMdmCtl(a2) ; test ack
dbeq d1,@waitAckhi ; loop for upto 1 msec
dbeq d2,@nextmsec ; loop for d2 msec
sne d0 ; set result (d0 <> 0 = error), bit hi
tst.b d0 ; set the condition codes <H26>
jmp (a3) ; return through a3 <37>
;————————————————————————————————————————————————————————————————————————————————
; Routine: SendSPI
;
; Input: a2.l - pointer to modem base
; a6 - pointer to serialpoll data area
; d1.b - byte to send
;
; Destroys: a4
; Destroys: d2,d1,a3 (by lower level routines)
;
; Returns d0.w - 0 = ok, non-zero = error
;
; Function: send a byte thru the SPI
;
;————————————————————————————————————————————————————————————————————————————————
SendSPI
move.l (sp)+,a4 ; pop return address into a4 <37>
swap d1 ; save the data byte in the hi work of d0
bsr.s WaitSPIAckHi ; (1) wait for pmgr idle <H24>
bne.s @error ; if bit low, error <H24>
;begin transaction
swap d1 ; get the data byte back
bset.b #OptLmpSPIDir,OptLmpSftCtl(a2) ; (2) set direction to output
move.b d1,OptSPISftReg(a2) ; (3) write data
bclr.b #OptSPIReq,OptSPIMdmCtl(a2) ; (4) assert data valid
bsr.s WaitSPIAckLo ; (5) --> modem shift data <H24>
; (6) wait for data accepted <H24>
bne.s @error ; if bit low, error <H24>
bset.b #OptSPIReq,OptSPIMdmCtl(a2) ; (7) clear data valid
move.w #noErr,d0 ; report no error
jmp (a4)
@error ; <H24>
bset.b #OptSPIReq,OptSPIMdmCtl(a2) ; (7) clear data valid <28>
move.w #immgSendStartErr,d0 ; report send error <H24>
jmp (a4)
;————————————————————————————————————————————————————————————————————————————————
; Routine: ReceiveSPI
;
; Input: a2.l - pointer to modem base
; a6 - pointer to serialpoll data area
; d1.b - byte to send
;
; Destroys: a4
; Destroys: d2,a3 (by lower level routines)
;
; Returns d0.w - 0 = ok, non-zero = error
; d1.b - data byte read
;
; Function: read a byte from the spi
;
;————————————————————————————————————————————————————————————————————————————————
ReceiveSPI
move.l (sp)+,a4 ; pop return address into a4 <37>
bsr.s WaitSPIAckHi ; (1) wait for pmgr idle <H24>
bne.s @error ; if bit low, error <H24>
;begin transaction
bclr.b #OptLmpSPIDir,OptLmpSftCtl(a2) ; (2) set direction to input
bclr.b #OptSPIReq,OptSPIMdmCtl(a2) ; (3) (RFD) ready for data
bsr.s WaitSPIAckLo ; (4) acknowledge req <H24>
; (5) <-- modem shifting <H24>
bne.s @error ; if bit low, error <H24>
bset.b #OptSPIReq,OptSPIMdmCtl(a2) ; (6) acknowledge ack
bsr.s WaitSPIAckHi ; (7) wait (DAV) <H24>
bne.s @error ; if bit low, error <H24>
move.b OptSPISftReg(a2),d1 ; (8) read data
move.w #noErr,d0 ; report no error
jmp (a4)
@error
bset.b #OptSPIReq,OptSPIMdmCtl(a2) ; (7) clear data valid <28>
move.w #immgRecvStartErr,d0 ; mark as recieve error <H24>
jmp (a4)
;_______________________________________________________________________
;
; Routine: UnloadPollstack
;
; Inputs: D7 -- pointer to top of poll stack
; A1 -- pointer to VIA1 base
; A6 -- pointer to SCC channel A data register
; SP -- pointer to bottom of poll stack
;
; Outputs: D7 -- pointer to top of poll stack
; A1 -- pointer to VIA1 base
; A6 -- pointer to SCC channel A data register
; SP -- pointer to top of poll stack
;
; Trashes: D0,D1,D2,A3,A4,A5
;
; Function: calls the poll proc to unload any bytes stashed from SCC
; port A while interrupts were disabled
;_______________________________________________________________________
UnloadPollstack
movea.l (sp)+,A4 ; pop the return address
cmpa.l d7,sp ; is there any poll data?
beq.s @NoSCCData ; -> no
move.l PollProc,d0 ; is there a poll proc?
beq.s @NoPollProc ; -> no
move.l d7,PollStack ; stuff the PollStack
movea.l d7,a3
movem.l immgrPollRegs,(a3) ; save regs while calling poll proc W/O USING STACK
lea vBufA(a1),a5 ; point to the register with the SCC WR/REQ bit in VIA 1<H26>
movea.l d0,a3
jsr (a3) ; run the poll proc
movea.l d7,a3
movem.l (a3),immgrPollRegs ; restore our registers
@NoPollProc movea.l d7,sp ; toss any bytes left on the pollstack <H26>
@NoSCCData jmp (a4)
;----------------------------------------------------------------------------------------
; mdmSndCtl3615
;
; Entry: a0 = modem manager param block pointer
; a1 = modem primitives global pointer
;
; Exit: d0 = result code
;
; Trashes: none
;
; Hit the bit in the modem sound control register to turn sound on or off. Use sound
; primitives to set the sound input source and the play thru volume.
;----------------------------------------------------------------------------------------
mdmSndCtl3615
sndInvalidSrc EQU $ff ; invalid sound input source
WITH immg3615Rec, immgParamBlock, ExpandMemRec, SoundIOHeader
@savedRegs REG d1 ; registers to save over call
movem.l @savedRegs,-(sp) ; save registers
move.w immgCommand(a0),d1 ; D1 -> sound on or off command ; <H10>
cmp.w PreviousCmd(a1),d1 ; make sure that we are doing the opposite of what has been done ; <H10>
beq.s @done ; if the same, that means sound on request ; <H10>
; with sound on already, or sound off request; <H10>
; with sound off already : <H10>
move.w d1,PreviousCmd(a1) ; save the command being executed ; <H10>
move.b OptMdmBase+OptSndCtl,d0 ; pick up the current state
bclr #bOptSndMask,d0 ; assume modem sound off
cmp.w #immgSndOn,d1 ; check if sound should go on
bne.s @continue ; if not, continue
bset #bOptSndMask,d0 ; turn modem sound on
@continue move.b d0,OptMdmBase+OptSndCtl ; make it so!
cmp.w #immgSndOn,d1 ; check if sound should go on ; <H3>
beq.s @saveIt ; if sound on, save the current state ; <H3>
move.b SndInputSrc(a1),d0 ; no, restore sound input
move.b PlayThruVol(a1),d1 ; D1 -> saved playthrough volume
exg d0,d1 ; D0 -> playthrough volume
bsr SetPlayThru ; reset playthrough volume first
exg d0,d1 ; D0 -> sound input source
bsr SetInputSrc ; reset input source last
bra.s @done ; continue to just set sound input ; <H3>
@saveIt movea.l ([ExpandMem],emSndPrimitives),a0 ; <H3>
move.b UserVolume(a0),PlayThruVol(a1) ; save playthrough volume setting
move.b SDVolume,d1 ; D1 -> playthrough volume
tst.l sndInputSource*4(a0) ; is there a handler? ; <H3>
beq.s @done ; no, just exit ; <H3>
move.l sndInputSource*4(a0),a0 ; <H3>
jsr (a0) ; call the ioprimitive ; <H3>
; check that the source that was returned is not invalid. The primitives for Optimus
; currently return sndInvalidSrc if the sound input source is undefined (not yet been
; set). Unfortunately, if we try to restore the sound input source to the value
; sndInvalidSrc, DFAC II hangs.
cmp.b #sndInvalidSrc,d0 ; check for garbage ; <H3>
bne.s @okToSave ; if not garbage, save it ; <H3>
moveq #0,d0 ; assume no input ; <H3>
@okToSave move.b d0,SndInputSrc(a1) ; save previous input source ; <H3>
moveq #sndAuxiliary,d0 ; set modem sound on ; <H3>
bsr SetInputSrc ; set input source first
exg d0,d1 ; D0 -> playthrough volume
bsr SetPlayThru ; set playthrough last
@done move.w #noErr,d0
movem.l (sp)+,@savedRegs ; restore registers
@exit rts
SetPlayThru movea.l ([ExpandMem],emSndPrimitives),a0 ; <H3>
tst.l sndPlayThruVol*4(a0) ; is there a handler? ; <H3>
beq.s @done ; no, just exit ; <H3>
move.l sndPlayThruVol*4(a0),a0
jsr (a0) ; call the ioprimitive
@done rts
SetInputSrc movea.l ([ExpandMem],emSndPrimitives),a0 ; <H3>
tst.l sndInputSelect*4(a0) ; is there a handler? ; <H3>
beq.s @done ; no, just exit ; <H3>
move.l sndInputSelect*4(a0),a0 ; <H3>
jsr (a0) ; call the ioprimitive ; <H3>
@done rts
ENDWITH
;----------------------------------------------------------------------------------------
; mdmExists3615
;
; Entry: none
;
; Exit: d0 = result code
;
; Trashes: none
;
; Check if a 3615 modem is installed in the box.
;----------------------------------------------------------------------------------------
mdmExists3615
@savedRegs REG d1/a2 ; registers to save over call
movem.l @savedRegs,-(sp) ; save registers
; now, how to tell if a modem is installed? Unfortunately, we do NOT get a
; bus error reading the modem register space (since this is ethernet prom space).
; This means that we must write a register in the modem and read it back to determine
; if there is anything at that address that will latch the data we send.
move.b BIOS_Config2+BIOSAddr,d0 ; get BIOS config 2 reg contents
bset #bBIOSIOCSTime,d0 ; set IO_CS_Time to be asserted on writes
move.b d0,BIOS_Config2+BIOSAddr ; put byte into configuration reg
movea.l #OptMdmBase,a2 ; get base address of modem
move.b OptSndCtl(a2),d0 ; contents of interrupt req reg
not.b d0 ; invert bits
bset #bOptIntMask,d0 ; never unmask interrupts unless handler is installed
move.b d0,OptSndCtl(a2) ; write invert out to int req reg
not.b d0 ; put back original
bset #bOptIntMask,d0 ; never unmask interrupts unless handler is installed
; Do a write to the modem ID reg so that the bus does not float to the thing just
; written to the register. MdmID is a safe place to write arbitrary data. If the
; byte written to MdmID floats on the next read, we will conclude that there is no
; modem installed (due to the eor).
move.b d0,OptMdmBase+OptMdmIDReg ; Place bad data on the bus ; <H7>
move.b OptSndCtl(a2),d1 ; read back contents
eor.b d1,d0 ; to test if bit for int mask latched
btst.l #bOptSndMask,d0 ; check int mask bit
beq.w @noModem ; no modem!
move.w #noErr,d0 ; indicate modem exists
@exit move.b BIOS_Config2+BIOSAddr,d1 ; get BIOS config 2 reg contents
bclr #bBIOSIOCSTime,d1 ; set IO_CS_Time to not be asserted on writes
move.b d1,BIOS_Config2+BIOSAddr ; put byte into configuration reg
movem.l (sp)+,@savedRegs ; restore registers
rts
@noModem move.w #immgNoBoardErr,d0 ; indicate no board
bra.s @exit
;----------------------------------------------------------------------------------------
; mdmSetUp3615
;
; Entry: none
;
; Exit: d0 = result code
; a0 = pointer to modem primitives globals
;
; Trashes: none
;
; Set up the primitives for the 3615 modem.
;----------------------------------------------------------------------------------------
mdmSetUp3615
@savedRegs REG a2-a3
movem.l @savedRegs,-(sp) ; save registers
WITH immg3615Rec, immg3615SlotQEl
; allocate private storage for modem primitives
move.l #immg3615Rec.size,d0 ; get size of private storage
_NewPtr ,SYS,CLEAR ; get a pointer in the system heap ; <H10>
tst.w d0 ; check for errors
bne.w @error1 ; if no memory, cannot continue
movea.l a0,a3 ; a3 = pointer to private storage
movea.l #OptMdmBase,a2 ; get base address of modem
move.l a2,ModemBase(a3) ; store base address
lea cmdCounts,a0 ; A0 -> pointer to command send count table for mdmPrime
move.l a0,SendTable(a3) ; store command send count table
lea replyCounts,a0 ; A0 -> pointer to receive count table
move.l a0,RecvTable(a3) ; store receive count table
moveq #0,d0 ; clear D0
move.b OptMdmIDReg(a2),d0 ; get modem ID
move.l d0,ModemType(a3) ; store the modem type in private storage
move.b #(1<<bOptIntMask),OptSndCtl(a2) ; set modem interrupt bit, clear speaker sound bit ; <H10>
; The bit in the via2 is set for a slot 9 interrupt whenever the modem interrupts, even
; though the modem interrupt comes in at level 3. If the process of a level 2 interrupt
; has already begun, the slot 9 interrupt will attempt to be handled, which causes a
; problem. Is there anything that we should be aware of that might bite us in the butt
; later since we are installing a minimal slot 9 interrupt handler? How can the slot 9
; handler actually tell that the modem caused the interrupt and the interrupt is not
; actually a spurious one?
move.l #immg3615SlotQEl.size,d0 ; size of 3615 slot queue element (modified)
_NewPtr ,SYS ; get a slot queue element in the system heap
tst.w d0 ; check for valid pointer
bne.s @error2 ; cannot go on like this...
move.l a0,Slot9Addr(a3) ; save pointer to slot 9 handler
move.w #0,sqPrio(a0) ; set priority to 0, the lowest priority
move.w #sIQType,sqType(a0) ; set type to slot interrupt type
lea sqInt9Count(a0),a2 ; get pointer to count buffer
move.l #0,(a2) ; initialize counter
move.l a2,sqParm(a0) ; set up optional a1 pointer to the counter space
lea Slot9Handler,a2 ; get the address of the slot interrupt handler
move.l a2,sqAddr(a0) ; put pointer into slot queue element routine address
move.l #OptHackSlotNum,d0 ; install the handler in slot 9
_SIntInstall
tst.w d0 ; any error?
bne.s @error3 ; we just can't go on...
move.b BIOS_Config2+BIOSAddr,d0 ; get BIOS config 2 reg contents
ori.b #(1<<bBIOSENETIRQLVL) | \ ; set irq level to level 3
(1<<bBIOSIOCSTime),d0 ; set IO_CS_Time to be asserted on writes
move.b d0,BIOS_Config2+BIOSAddr ; put byte into configuration reg
move.l ModemBase(a3),a2 ; A2 -> modem base address ; <H10>
move.b #(1<<bOptIntMask),OptSndCtl(a2) ; set modem interrupt bit, clear speaker sound bit ; <H10>
movea.l a3,a0 ; return pointer to primitives globals
moveq #noErr,d0 ; no error
@exit movem.l (sp)+,@savedRegs ; restore registers
rts
; have allocated a slot queue element (in globals)
@error3 movea.l Slot9Addr(a3),a0 ; A0 -> pointer to slot queue element
_DisposPtr ; take out the trash
; have allocated pointer to globals in A3
@error2 movea.l a3,a0 ; gotta have it
_DisposPtr ; gotta get rid of it
; indicate initialization error
@error1 move.w #immgInitError,d0 ; bad...
bra.s @exit
ENDWITH
;_______________________________________________________________________
;
; Routine: Slot 9 handler
;
; Inputs: a1 = pointer to a count buffer
;
; Outputs: d0 = 0 if interrupt not handled, 1 if interrupt handled
;
; Trashes: a0
;
; Function: a simple slot 9 interrupt handler. The reason this routine
; is necessary is twofold:
; 1. There is a bug in PrimeTime that sets the VIA2 port A data register
; bit that signifies a slot 9 interrupt has occurred when the modem
; signals an interrupt on level 3.
; 2. There is a bug in the interrupt handler for the Elan card that leaves
; the interrupt mask bits in the processor status register (SR) set
; to mask level 4 or 6, which, in combination with above bug, causes
; the slot manager slot interrupt code to go into an infinite loop under
; the following circumstance:
; The processor is handling a level 2 interrupt for the Elan card,
; and while it is in the Elan interrupt service routine, a modem
; interrupt comes in, setting the VIA2 port A data register bit.
; The Elan interrupt routine exits, but leaves the SR mask set to
; 4 (or 6). The slot manager, wanting to make sure that all slot
; interrupts have been handled, reads the VIA2 port A data register,
; which indicates that a slot 9 interrupt is requested. The slot 9
; interrupt handler is entered. If the handler for slot 9 does not
; lower the SR mask to 2 (to allow the real level 3 interrupt to occur
; and be serviced), an infinite loop results.
;_______________________________________________________________________
ALIGN 2
Slot9Handler
add.l #1,(a1) ; bump counter of how many times in this routine
move sr,d0 ; get the status register to check for interrupt mask
andi.w #statMaskBits,d0 ; mask off interrupt mask information
cmpi.w #level3Bits,d0 ; check for int mask > 2
blo.s @noProblem ; no problem with interrupt mask
move sr,d0 ; save the status register
swap d0 ; put saved SR in high word
move sr,d0 ; get SR to lower mask
andi.w #~statMaskBits,d0 ; clear all status mask bits
ori.w #level2Bits,d0 ; make interrupt mask level 2
move d0,sr ; lower priority mask temporarily
swap d0 ; get the saved sr -- the level 3 interrupt should occur here!
move d0,sr ; restore interrupt mask level
@noProblem move.l VIA2RBVOSS,a0 ; get via2 base address
move.b vBufA(a0),d0 ; read via 2 data register
andi.b #(1<<v2IRQ1),d0 ; mask off slot 9 interrupt bit (will be zero if interrupt not handled, 1 if handled)
rts
ALIGN 2
;----------------------------------------------------------------------------------------
; mdmTearDown3615
;
; Entry: a1 = pointer to modem primitives globals
;
; Exit: d0 = no error
;
; Trashes: none
;
; Deallocates everything that the set up routine allocated and sets PrimeTime so that
; no modem interrupts are generated.
;----------------------------------------------------------------------------------------
mdmTearDown3615
WITH immg3615Rec
; make sure BIOS does not generate level three interrupts
move.b BIOS_Config2+BIOSAddr,d0 ; get BIOS config 2 reg contents
bclr.l #bBIOSENETIRQLVL,d0 ; set irq level to level 2
bclr.l #bBIOSIOCSTime,d0 ; set IO_CS_Time to not be asserted on writes
move.b d0,BIOS_Config2+BIOSAddr ; put byte into configuration reg
; remove slot 9 interrupt handler
move.l Slot9Addr(a1),a0 ; A0 -> pointer to slot queue element
move.l #OptHackSlotNum,d0 ; remove the handler from slot 9
_SIntRemove ; get rid of it if it is there
; deallocate slot queue element
move.l Slot9Addr(a1),a0 ; A0 -> pointer to slot queue element
_DisposPtr
; deallocate private storage for modem primitives
movea.l a1,a0 ; A0 -> pointer to private storage
_DisposPtr
moveq #noErr,d0 ; no error
@exit rts
ENDWITH
;----------------------------------------------------------------------------------------
; mdmName3615
;
; Entry: a0 = pointer to string buffer
; a1 = pointer to modem primitives globals
;
; Exit: d0 = no error
; a0 = pointer to null terminated string
;
; Trashes: A1
;
; Returns the name of the modem.
;----------------------------------------------------------------------------------------
mdmName3615
move.l a0,-(sp) ; save pointer
movea.l a0,a1 ; destination
lea @modemName,a0 ; source (skip over length byte)
@loop move.b (a0)+,(a1)+ ; copy one byte
bne.s @loop ; keep copying until null terminal byte is copied
movea.l (sp)+,a0 ; return modem name in A0
moveq #noErr,d0 ; no error
@exit rts
@modemName dc.b 'Express Modem'
dc.b 0
ALIGN 2
;----------------------------------------------------------------------------------------
; mdmSndVol3615
;
; Entry: a0 = modem manager param block pointer
; a1 = modem primitives global pointer
;
; Exit: d0 = result code
;
; Trashes: none
;
; Returns immgInvalidSelector error, since the express modem on Optimus does not currently
; support relative sound volume control. This routine returns an error so that when software
; becomes available that can take advantage of sound volume, it can check the return
; result from this function to determine if the desired behavior has taken place.
;----------------------------------------------------------------------------------------
mdmSndVol3615
WITH immg3615Rec
move.w #immgInvalidSelector,d0
rts
ENDWITH
;----------------------------------------------------------------------------------------
; mdmSndHW3615
;
; Entry: a0 = modem manager param block pointer
; a1 = modem primitives global pointer
;
; Exit: d0 = result code
;
; Trashes: none
;
; Returns immgInvalidSelector error, since the express modem on Optimus does not currently
; support system sound hardware arbitration. This routine returns an error so that if software
; becomes available that arbitrates for the hardware, it can check the return
; result from this function to determine if the desired behavior has taken place.
;----------------------------------------------------------------------------------------
mdmSndHW3615
WITH immg3615Rec
move.w #immgInvalidSelector,d0
rts
ENDWITH
;----------------------------------------------------------------------------------------
; GetLenCount
;
; Entry: d3.w = command for count
; a1 = pointer to count table
;
; Exit: d1.b = count
; condition codes set on d1.b
;
; Trashes: a1
;
; Looks up count for command in d3 in table.
;----------------------------------------------------------------------------------------
GetLenCount
@saveRegs REG d3/a0 ; registers to save
movem.l @saveRegs,-(sp) ; save registers
clr.w d1 ; clear out the low word
lea @RangeTable,a0 ; A0 -> pointer to range table
@checkLoop move.b (a0)+,d1 ; D1 -> normalizing byte
beq.s @noCount ; no more ranges, no count...
sub.b d1,d3 ; normalize d3 to range
bmi.s @noCount ; if less than, no count
move.b (a0)+,d1 ; D1 -> range size
cmp.b d1,d3 ; check if d3 is in range
blt.s @lookup ; yep, go look it up
adda.w d1,a1 ; increment table pointer to next range
bra.s @checkLoop ; nope, continue checking...
@lookup move.b (a1,d3.w),d1 ; D1 -> count
@exit movem.l (sp)+,@saveRegs ; restore registers
rts
@noCount move.b #$ff,d1 ; D1 -> no count
bra.s @exit
@RangeTable
dc.b $50,$10 ; cmd range $50-$5f
dc.b $20,$10 ; cmd range $70-$7f
dc.b $30,$10 ; cmd range $a0-$af
dc.w 0
;_______________________________________________________________________________________
;
; This table is used to determine if the 680x0 needs to send a count byte to the modem.
; A positive value means that the count is known by both sides, and so it is not sent.
; A negative value means that the command can send variable amounts of data, so the
; count byte specified in the modem manager param block needs to be sent.
;
; Unused commands will be marked as expecting the count to be sent so that commands
; may be added without having to change the ROM.
cmdCounts DC.B 1 ; [$50] Set Internal Modem Control Bits
DC.B 0 ; [$51] Clear FIFOs
DC.B 2 ; [$52] Set FIFO Interrupt Marks
DC.B 2 ; [$53] Set FIFO Sizes
DC.B -1 ; [$54] Write Data to Modem
DC.B 1 ; [$55] Set Data Mode
DC.B 3 ; [$56] Set Flow Control Mode <H55>
DC.B 1 ; [$57] Set DAA control lines <H54>
DC.B 0 ; [$58] Read Internal Modem Status
DC.B 1 ; [$59] Get DAA Identification <H55>
DC.B 0 ; [$5A] Get FIFO Counts
DC.B 0 ; [$5B] Get Maximum FIFO Sizes
DC.B 0 ; [$5C] Read Data From Modem
DC.B -1 ; [$5D] General Purpose modem command (modem dependent) <H58>
DC.B -1 ; [$5E] -
DC.B -1 ; [$5F] -
DC.B 1 ; [$70] Set One-Second Interrupt
DC.B 1 ; [$71] Modem Interrupt Control
DC.B 1 ; [$72] Set Modem Interrupt
DC.B -1 ; [$73] -
DC.B -1 ; [$74] -
DC.B -1 ; [$75] -
DC.B -1 ; [$76] -
DC.B -1 ; [$77] -
DC.B 0 ; [$78] Read Interrupt Flag Register.
DC.B 0 ; [$79] Read Modem Interrupt Data
DC.B -1 ; [$7A] -
DC.B -1 ; [$7B] -
DC.B -1 ; [$7C] -
DC.B -1 ; [$7D] -
DC.B 4 ; [$7E] Enter Shutdown Mode
DC.B 4 ; [$7F] Enter Sleep Mode
DC.B 2 ; [$A0] Write Modem Register
DC.B 2 ; [$A1] Clear Modem Register Bits
DC.B 2 ; [$A2] Set Modem Register Bits
DC.B 4 ; [$A3] Write DSP RAM
DC.B -1 ; [$A4] Set Filter Coefficients
DC.B 0 ; [$A5] Reset Modem
DC.B -1 ; [$A6] -
DC.B -1 ; [$A7] -
DC.B 1 ; [$A8] Read Modem Register
DC.B 1 ; [$A9] Send Break
DC.B 3 ; [$AA] Dial Digit
DC.B 2 ; [$AB] Read DSP RAM
DC.B -1 ; [$AC] -
DC.B -1 ; [$AD] -
DC.B -1 ; [$AE] -
DC.B -1 ; [$AF] -
; This table is used to determine how the 680x0 needs to handle the reply:
;
; =0: no reply should be expected.
; =1: only a reply byte will be sent (this is a special case for a couple of commands)
; <0: a reply is expected and the modem will send a count byte.
; >1: a reply is expected and the modem will not send a count byte,
; but the count to return in the modem manager param block will be (value-1).
;
; Unused commands in the range $x8 to $xF will be marked as expecting a reply (with count)
; so that commands may be added without having to change the ROM.
replyCounts DC.B 0 ; [$50] Set Internal Modem Control Bits
DC.B 0 ; [$51] Clear FIFOs
DC.B 0 ; [$52] Set FIFO Interrupt Marks
DC.B 0 ; [$53] Set FIFO Sizes
DC.B 0 ; [$54] Write Data to Modem
DC.B 0 ; [$55] Set Data Mode
DC.B 0 ; [$56] Set Flow Control Mode
DC.B 0 ; [$57] Set DAA control lines <H54>
DC.B 1+1 ; [$58] Read Internal Modem Status
DC.B 0 ; [$59] Get DAA Identification <H55>
DC.B 2+1 ; [$5A] Get FIFO Counts
DC.B 2+1 ; [$5B] Get Maximum FIFO Sizes
DC.B -1 ; [$5C] Read Data From Modem
DC.B -1 ; [$5D] General Purpose modem command (modem dependent) <H58>
DC.B -1 ; [$5E] -
DC.B -1 ; [$5F] -
DC.B 0 ; [$70] Set One-Second Interrupt
DC.B 0 ; [$71] Modem Interrupt Control
DC.B 0 ; [$72] Set Modem Interrupt
DC.B 0 ; [$73] -
DC.B 0 ; [$74] -
DC.B 0 ; [$75] -
DC.B 0 ; [$76] -
DC.B 0 ; [$77] -
DC.B -1 ; [$78] Read Interrupt Flag Register.
DC.B -1 ; [$79] Read Modem Interrupt Data
DC.B -1 ; [$7A] -
DC.B -1 ; [$7B] -
DC.B -1 ; [$7C] -
DC.B -1 ; [$7D] -
DC.B 0+1 ; [$7E] Enter Shutdown Mode
DC.B 0+1 ; [$7F] Enter Sleep Mode
DC.B 0 ; [$A0] Write Modem Register
DC.B 0 ; [$A1] Clear Modem Register Bits
DC.B 0 ; [$A2] Set Modem Register Bits
DC.B 0 ; [$A3] Write DSP RAM
DC.B 0 ; [$A4] Set Filter Coefficients
DC.B 0 ; [$A5] Reset Modem
DC.B 0 ; [$A6] -
DC.B 0 ; [$A7] -
DC.B 1+1 ; [$A8] Read Modem Register
DC.B 0 ; [$A9] Send Break
DC.B 0 ; [$AA] Dial Digit
DC.B 0 ; [$AB] Read DSP RAM
DC.B -1 ; [$AC] -
DC.B -1 ; [$AD] -
DC.B -1 ; [$AE] -
DC.B -1 ; [$AF] -
;••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
;••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
; END OPTIMUS MODEM PRIMITIVES
;••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
;••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
End
Reference in New Issue View Git Blame Copy Permalink