mirror of
https://github.com/elliotnunn/supermario.git
synced 2024-11-29 05:49:19 +00:00
416 lines
16 KiB
Plaintext
416 lines
16 KiB
Plaintext
;
|
|
; File: I2C.a
|
|
;
|
|
; Contains: Routines for reading and writing I-squared-C serial ROMS.
|
|
;
|
|
; Written by:
|
|
;
|
|
; Copyright: © 1993 by Apple Computer, Inc., all rights reserved.
|
|
;
|
|
; Change History (most recent first):
|
|
;
|
|
; <K2> 5/20/93 EH Fixed up comments.
|
|
; <1> 5/20/93 EH first checked in
|
|
;
|
|
;
|
|
|
|
;———————————————————————————————————————————————————————————————————————————————————————— <5> HJR
|
|
;
|
|
; Routine: X24c01aGetID
|
|
;
|
|
; This routine talks to the X24c01a Xicor Serial ROM part to get the Ethernet ID
|
|
; address stored therein. The X24c01a belongs to a class of parts whose interface
|
|
; is the standard I-squared-C (I2C) inteface, consististing of two signals, a clock
|
|
; and a bi-directional data signal.
|
|
;
|
|
; On Blackbird, the clock signal is hooked up to PB0 of the VIA 1 cell inside Whitney.
|
|
; the clock signal is hooked up to PB1 of the VIA 1 cell inside Whitney.
|
|
;
|
|
; Since there are an increasing number of I2C ROMs in Macintosh products, we may
|
|
; want to generalize this solution at some point. But for now...
|
|
;
|
|
;———————————————————————————————————————————————————————————————————————————————————————— <5> HJR
|
|
|
|
print off
|
|
load 'StandardEqu.d'
|
|
include 'HardwarePrivateEqu.a'
|
|
include 'i2cEqu.a'
|
|
print on
|
|
machine MC68040
|
|
|
|
|
|
X24c01aGetID PROC EXPORT
|
|
|
|
* bra.s BBirdGetENetID
|
|
|
|
;————————————————————————————————————————————————————————————————————————————————————————
|
|
; Routine: BBirdGetENetID
|
|
;
|
|
; Inputs: a0.l - points to memory in which to place the ROM ID bytes
|
|
;
|
|
; Outputs: a0.l - points to valid ROM ID bytes
|
|
; or points to zeroes
|
|
;
|
|
; Trashes:
|
|
;
|
|
; Function: Gets the EtherNet ID from the Serial EtherNet ID ROM.
|
|
;————————————————————————————————————————————————————————————————————————————————————————
|
|
BBirdGetENetID
|
|
ENetregs REG d0-d7/a5
|
|
movem.l ENetregs, -(sp)
|
|
|
|
moveq #retryCnt, d3 ; set the retry count
|
|
move.l VIA, a5 ; point to the via
|
|
|
|
@ReadCmdStart
|
|
bsr.w SendStart ; send Start Condition
|
|
move.b #$A0, d4 ; send slave address for write
|
|
bsr.w SendByte
|
|
bsr.w ReceiveAck ; get Acknowledge
|
|
beq.s @sendWordAddr ; Ack OK? then go on
|
|
|
|
@error
|
|
move.l a1, a0 ; restore our pointer
|
|
cmpi.w #WereLosers, d0 ; are we totally dead?
|
|
beq.s @exit ; totally dead, so exit with ID = 0
|
|
dbra d3, @ReadCmdStart ; retry if non-zero retry count
|
|
bra.s @exit ; retries exhausted, so punt with ID = 0
|
|
|
|
@sendWordAddr
|
|
moveq #0, d4 ; send read addr = 0
|
|
bsr.w SendByte
|
|
bsr.w ReceiveAck ; get Acknowledge
|
|
bne.s @error ; Ack OK? then go on
|
|
|
|
@sendSlaveAddr
|
|
bsr.w SendStart ; send another Start Condition
|
|
move.b #$A1, d4 ; send slave address for read
|
|
bsr.w SendByte
|
|
bsr.w ReceiveAck ; get Acknowledge
|
|
bne.s @error
|
|
@read
|
|
move.l a0, a1 ; save our pointer
|
|
moveq #8-1, d1 ; get 8 bytes
|
|
@byteLoop
|
|
bsr.w GetByte ; get a byte
|
|
bsr.w SendAck ; send acknowledge
|
|
move.b d4, (a0)+ ; save it
|
|
dbra d1, @byteLoop
|
|
|
|
move.l a1, a0 ; restore our pointer
|
|
|
|
@exit bsr.w SendStop
|
|
movem.l (sp)+, ENetregs
|
|
rts
|
|
|
|
;————————————————————————————————————————————————————————————————————————————————————————
|
|
; Routine: BBirdSetENetID
|
|
;
|
|
; Inputs: a0.l - points to ROM ID in memory to send to ROM
|
|
;
|
|
; Outputs:
|
|
;
|
|
; Trashes:
|
|
;
|
|
; Function: Sets the EtherNet ID for the Serial EtherNet ID ROM.
|
|
;————————————————————————————————————————————————————————————————————————————————————————
|
|
BBirdSetENetID
|
|
movem.l ENetregs, -(sp)
|
|
|
|
moveq #retryCnt, d3 ; set the retry count
|
|
move.l VIA, a5 ; point to the via
|
|
moveq #2-1, d6 ; page cnt: two pages = eight bytes
|
|
moveq #0, d7 ; write address start
|
|
|
|
@PageWriteStart
|
|
move.l a0, a1 ; save our pointer
|
|
bsr.s SendStart ; send Start Condition
|
|
move.b #$A0, d4 ; send slave address for write
|
|
bsr.w SendByte
|
|
bsr.w ReceiveAck ; get Acknowledge
|
|
beq.s @sendWordAddr ; Ack OK? then go on
|
|
|
|
@error
|
|
move.l a1, a0 ; restore our pointer
|
|
bsr.s SendStop ; stop the music
|
|
cmpi.w #WereLosers, d0 ; are we totally dead?
|
|
beq.s @exit ; totally dead, so exit with ID = 0
|
|
dbra d3, @PageWriteStart ; retry if non-zero retry count
|
|
bra.s @exit ; retries exhausted, so punt with ID = 0
|
|
|
|
@sendWordAddr
|
|
move.l d7, d4 ; starting write addr for this page
|
|
bsr.w SendByte
|
|
bsr.w ReceiveAck ; get Acknowledge
|
|
bne.s @error ; Ack OK? then go on
|
|
@write
|
|
moveq #4-1, d1 ; send 4 bytes
|
|
@byteLoop move.b (a0)+, d4 ; get byte to send
|
|
bsr.s SendByte ; send it
|
|
bsr.w ReceiveAck ; wait for acknowledge
|
|
bne.s @error ; punt on error
|
|
dbra d1, @byteLoop ; loop thru page bytes
|
|
|
|
bsr.s SendStop ; stop the music
|
|
bsr.w Wait10ms ; wait for ROM's internal write cycle
|
|
addq.w #4, d7 ; bump write addr to next page
|
|
dbra d6, @PageWriteStart ; loop thru 2 pages = eight bytes
|
|
|
|
move.l a1, a0 ; restore our pointer
|
|
@exit movem.l (sp)+, ENetregs
|
|
rts
|
|
|
|
|
|
|
|
;————————————————————————————————————————————————————————————————————————————————————————
|
|
; Routine: SendStart
|
|
;
|
|
; Inputs: a5.l - points to VIA
|
|
;
|
|
; Outputs: None
|
|
;
|
|
; Trashes: d2
|
|
;
|
|
; Function: Sends Start condition for transaction to Ethernet ID ROM.
|
|
; Start indicated by HIGH to LOW Data transition while Clock is HIGH.
|
|
;————————————————————————————————————————————————————————————————————————————————————————
|
|
SendStart
|
|
bset.b #vENetIDData,vDIRB(a5) ; set Data direction OUT
|
|
bset.b #vENetIDData, (a5) ; must init data ...
|
|
bset.b #vENetIDClk, (a5) ; ... before clock
|
|
bsr.w Wait10 ; wait start-setup time
|
|
bclr.b #vENetIDData, (a5) ; set the start condition
|
|
bsr.w Wait10 ; wait start-hold time
|
|
bclr.b #vENetIDClk, (a5) ; and drop the clock
|
|
rts
|
|
|
|
|
|
;————————————————————————————————————————————————————————————————————————————————————————
|
|
; Routine: SendStop
|
|
;
|
|
; Inputs: a5.l - points to VIA
|
|
;
|
|
; Outputs: None
|
|
;
|
|
; Trashes: d2
|
|
;
|
|
; Function: Sends Start condition for transaction to Ethernet ID ROM.
|
|
; Data must be LOW coming in (we have just ack'd).
|
|
; Stop indicated by LOW to HIGH Data transition while Clock is HIGH.
|
|
;————————————————————————————————————————————————————————————————————————————————————————
|
|
SendStop
|
|
bset.b #vENetIDData,vDIRB(a5) ; set Data direction OUT
|
|
bset.b #vENetIDClk, (a5) ; set clock HIGH
|
|
bsr.w Wait10 ; wait stop-setup time
|
|
bset.b #vENetIDData, (a5) ; set the stop condition
|
|
bsr.w Wait10 ; wait stop-hold time
|
|
rts
|
|
|
|
|
|
;————————————————————————————————————————————————————————————————————————————————————————
|
|
; Routine: ClockBit
|
|
;
|
|
; Inputs: a5.l - points to VIA
|
|
;
|
|
; Outputs: d5.b - level of rcv bit when clock is high
|
|
;
|
|
; Trashes: d2
|
|
;
|
|
; Function: Pulse high.
|
|
; Turns off interrupts so we don't screw up.
|
|
;————————————————————————————————————————————————————————————————————————————————————————
|
|
ClockBit
|
|
|
|
move sr, -(sp) ; save status register
|
|
ori.w #hiIntMask, sr ; turn off interrupts
|
|
|
|
bsr.w Wait10 ; wait some more
|
|
bset.b #vENetIDClk, (a5) ; clock goes HIGH
|
|
btst.b #vENetIDData, (a5) ; get the bit
|
|
sne.b d5 ;
|
|
bclr.b #vENetIDClk, (a5) ; clock goes LOW
|
|
bsr.w Wait10 ; wait some more
|
|
|
|
move (sp)+, sr ; restore interrupts
|
|
rts
|
|
|
|
|
|
;————————————————————————————————————————————————————————————————————————————————————————
|
|
; Routine: SendByte
|
|
;
|
|
; Inputs: d4.b - byte to send
|
|
;
|
|
; Outputs:
|
|
;
|
|
; Trashes:
|
|
;
|
|
; Function: Sends a byte to the EtherNet ID ROM
|
|
;————————————————————————————————————————————————————————————————————————————————————————
|
|
SendByte
|
|
sendregs REG d0-d3/d5
|
|
|
|
movem.l sendregs, -(sp)
|
|
|
|
bset.b #vENetIDData,vDIRB(a5) ; set Data direction OUT
|
|
moveq #1,d1 ; set send/rcv flag
|
|
moveq #8-1, d3 ; loop thru 8 bits
|
|
|
|
@loop rol.b #1,d4 ; get bit to send in the carry
|
|
bcc.s @zero ;
|
|
bset.b #vENetIDData, (a5) ; send a one
|
|
bra.s @clockData
|
|
@zero bclr.b #vENetIDData, (a5) ; send a zero
|
|
@clockData bsr.s ClockBit ; send out a bit
|
|
dbra d3, @loop
|
|
|
|
movem.l (sp)+, sendregs
|
|
rts
|
|
|
|
|
|
;————————————————————————————————————————————————————————————————————————————————————————
|
|
; Routine: GetByte
|
|
;
|
|
; Inputs:
|
|
;
|
|
; Outputs: d4.b has the received byte
|
|
;
|
|
; Trashes:
|
|
;
|
|
; Function: Receives a byte from the EtherNet ID ROM
|
|
;————————————————————————————————————————————————————————————————————————————————————————
|
|
GetByte
|
|
getByteRegs REG d0-d3/d5
|
|
|
|
movem.l getByteRegs, -(sp)
|
|
|
|
bclr.b #vENetIDData,vDIRB(a5) ; Data direction is IN
|
|
moveq #0,d1 ; clear send/rcv flag
|
|
moveq #8-1, d3 ; loop thru 8 bits
|
|
moveq #0,d4 ; clear for incoming byte
|
|
|
|
@loop bsr.s ClockBit ; clock in a bit
|
|
roxl.b #1,d5 ; get incoming bit into extend bit
|
|
roxl.b #1,d4 ; shift incoming bit receive byte
|
|
dbra d3, @loop
|
|
|
|
movem.l (sp)+, getByteRegs
|
|
rts
|
|
|
|
|
|
;————————————————————————————————————————————————————————————————————————————————————————
|
|
; Routine: ReceiveAck
|
|
;
|
|
; Inputs: a5.l - points to VIA
|
|
;
|
|
;
|
|
; Outputs: d0.w - error indicator
|
|
;
|
|
; Trashes:
|
|
;
|
|
; Function: Waits for an acknowledge bit from the EtherNet ID ROM.
|
|
; Data direction must be IN.
|
|
;————————————————————————————————————————————————————————————————————————————————————————
|
|
ReceiveAck
|
|
ackregs REG d1-d3/d5
|
|
movem.l ackregs, -(sp)
|
|
|
|
bclr.b #vENetIDData,vDIRB(a5) ; Data direction is IN
|
|
moveq #0, d1 ; clear the xmit/rcv flag
|
|
bsr.s ClockBit ; get a bit
|
|
tst.b d5 ; did we get the ACK?
|
|
beq.s @ackOK
|
|
|
|
moveq #badACK, d0 ; assume we get ACK late
|
|
moveq #8-1-1, d3 ; lets try to get ACK for rest of byte
|
|
@tryForAck
|
|
bsr.s ClockBit ; get a bit
|
|
tst.b d5 ; did we get the ACK?
|
|
beq.s @getToKnownState ; yes, now get into a known state
|
|
dbra d3, @tryForAck ; no, try for ACK again
|
|
moveq #WereLosers, d0 ; never got an ACK, return PUNT error
|
|
bra.s @exit
|
|
|
|
@getToKnownState
|
|
bsr.s GetByte ; read ROM just in case
|
|
bclr.b #vENetIDData, (a5) ; send out ACK
|
|
bsr.w SendStop ; send Stop
|
|
bra.s @exit ; return bacACK error
|
|
|
|
|
|
@ackOK moveq #0,d0 ; return happy-Ack
|
|
@exit movem.l (sp)+, ackregs
|
|
tst.w d0 ; set error condition
|
|
rts
|
|
|
|
|
|
|
|
|
|
|
|
;————————————————————————————————————————————————————————————————————————————————————————
|
|
; Routine: SendAck
|
|
;
|
|
; Inputs: a5.l - points to VIA
|
|
;
|
|
; Outputs:
|
|
;
|
|
; Trashes: d1, d4
|
|
;
|
|
; Function: Sends an acknowledge bit to the EtherNet ID ROM
|
|
;————————————————————————————————————————————————————————————————————————————————————————
|
|
SendAck
|
|
@sendackregs REG d1/d4
|
|
|
|
movem.l @sendackregs, -(sp)
|
|
|
|
bset.b #vENetIDData,vDIRB(a5) ; Data direction is OUT
|
|
moveq #1, d1 ; set xmit/rcv flag
|
|
bclr.b #vENetIDData, (a5) ; clear for Ack
|
|
bsr.w ClockBit ; send Ack bit
|
|
|
|
movem.l (sp)+, @sendackregs
|
|
rts
|
|
|
|
|
|
|
|
|
|
;————————————————————————————————————————————————————————————————————————————————————————
|
|
; Routine: Wait5, Wait10, Wait10ms
|
|
;
|
|
; Inputs:
|
|
;
|
|
; Outputs:
|
|
;
|
|
; Trashes: d2
|
|
;
|
|
; Function: Delays 5µs, 10µs, and 10ms
|
|
;————————————————————————————————————————————————————————————————————————————————————————
|
|
Wait10 move.w TimeVIAdb,d2 ; 1 ms delay
|
|
lsl.w #2,d2 ; 4 ms delay
|
|
add.w TimeVIAdb,d2 ; 5 ms delay
|
|
lsr.w #8,d2 ; 9.76 µs delay
|
|
lsr.w #1,d2
|
|
@loop tst.b ([VIA])
|
|
dbra d2,@loop
|
|
rts
|
|
|
|
Wait5 move.w TimeVIAdb,d2 ; 1 ms delay
|
|
lsl.w #2,d2 ; 4 ms delay
|
|
add.w TimeVIAdb,d2 ; 5 ms delay
|
|
lsr.w #8,d2 ; 4.88 µs delay
|
|
lsr.w #2,d2
|
|
@loop tst.b ([VIA])
|
|
dbra d2,@loop
|
|
rts
|
|
|
|
Wait10ms move.w TimeVIAdb,d2 ; 1 ms delay
|
|
lsl.w #3,d2 ; 8 ms delay
|
|
add.w TimeVIAdb,d2 ; 9 ms delay
|
|
add.w TimeVIAdb,d2 ; 10 ms delay
|
|
@loop tst.b ([VIA])
|
|
dbra d2,@loop
|
|
rts
|
|
|
|
|
|
ENDPROC
|
|
|
|
END |