Macintosh-SW/supermario
1
0
Fork 0
mirror of https://github.com/elliotnunn/supermario.git synced 2024-11-22 19:31:02 +00:00
Code Issues Projects Releases Wiki Activity
2e16381318
supermario/base/SuperMarioProj.1994-02-09/OS/SCSIMgr4pt3/BootItt.c
Elliot Nunn 2e16381318 Bring in sources, and document
2019-06-29 23:17:50 +08:00

1097 lines
39 KiB
C
Raw Blame History

/*
File: BootItt.c
Contains: Code that loads in SCSI Drivers at boot time
Entry points: InitSCSIBoot
IttBoot
IsItt
Written by: Clinton Bauder
Copyright: © 1992-1994 by Apple Computer, Inc., all rights reserved.
Change History (most recent first):
<SM36> 1/28/94 chp Move a local variable declaration inside a conditional
compilation block so it won't generate a compiler warning when
it is not used.
<SM35> 1/25/94 DCB Fixed a minor error in the way we interpret PRAM. The code was
assuming that SCSI ID 7 had a fixed unit table entry which is
not true. (only 0-6)
<SM34> 1/13/94 chp Adjust the usage of dNeedLock and dRAMBased, since the former
local definitions were different than the constants defined in
Inside Mac, and now in Devices.h.
<SM33> 1/13/94 chp Modify SOpenDriver to use new driver types in Devices.h.
<SM32> 11/22/93 pdw Rolling in from <MCxx>.
<MC5> 11/9/93 pdw Fixed problem with almost-bootable floppies. IttBoot now
returns the refNum of the default disk whenever it sees it. We
also init SCSIDrvrs in here and call InitSCSIBoot from InitItt
instead of from StartSearch.
<SM31> 10/29/93 DCB Don't load SIMs from the SlotManager at INIT time.
<SM30> 10/14/93 pdw <MC> roll-in.
<MC3> 9/26/93 pdw Fixed a little problem with the forceBoot stuff - should work
just fine now.
<MC2> 9/26/93 pdw Added forceBoot ability, fixed CmdShOptDel, fixed multi-bus
booting bugs, a couple of other little bug fixes/changes.
<SM29> 9/12/93 pdw Name changes. Added start of check for VirtualID info for
generating mask when running post-boot.
<SM28> 9/9/93 pdw Lots of little changes. Name changes, temporary cache_bug
stuff.
<SM27> 8/23/93 pdw Added support for LimitPRAMClear, IgnoreCmdOptShDel,
LoadDefaultOnly - three options required for AIX security,
enabled by setting bits in PRAM $76.
<SM26> 7/8/93 pdw Changed some shorts to longs.
<SM25> 6/29/93 pdw Massive checkins: Change asynchronicity mechanism to CallMachine
stack switching mechanism. Adding support for Cold Fusion.
Rearranging HW/SW Init code. Some code optimizations.
<SM24> 5/31/93 PW Made references to block numbers in the DDM and the Partition
map relative to the DDM.
<SM23> 5/29/93 PW Quoting instead of <> StandardGlue.h
<SM22> 5/29/93 PW Started putting in AIX boot stuff. Added check for PRAM OSType
instead of constant sbMac check.
<SM21> 5/25/93 DCB Rollin from Ludwig. (The next two items below)
<LW14> 5/24/93 PW Fixing "conflict with Figment" bug which is actually our failing
to clear a parameter block before using it.
<LW13> 5/21/93 PW Using scsiMaxTarget in BusInquiry for highestSCSIID instead of
figuring it out based on scsiBusWideXX characteristics.
<SM20> 5/24/93 PW Fixing "conflict with Figment" bug which is actually our failing
to clear a parameter block before using it.
<SM19> 5/5/93 PW Converted names to meanies-friendly names.
<LW11> 3/26/93 PW Cleared parameter blocks before using them.
<SM17> 3/20/93 PW Included SysEqu.
<LW10> 3/23/93 DCB Fixed a bug which prevented bootable CDs from booting. We need
to ignore Data Run errors at least until we have read block
zero. For now we will ignore them completely.
<LW9> 3/10/93 DCB Fixed a shine-through problem (again) which caused the high
nybble of D5 to get loaded with a weird value when loading
drivers.
<LW8> 3/8/93 DCB Fixed bug where startup disk wouldn't boot if CMD_OPT_SHFT_DEL
was released after nothing else booted.
<LW7> 3/8/93 PW Included SysEqu.
<LW6> 3/1/93 DCB Changed startup PRAM to match slot drivers. Also added code to
scan for srsrcs of type SIM.
<LW5> 2/17/93 PW Got rid of TIB - no longer supported.
<LW4> 2/13/93 PW Moved SetLoadFlag macro from BootItt.h to a routine in BootItt.c
for SCSIDrvrs lo-mem support.
<SM15> 2/1/93 PW Update from the latest of Ludwig. Also changes required for PDM
(will update Ludwig with these as needed myself).
<LW3> 1/27/93 DCB Added code for CmdOptShiftDel startup sequence to fix Radar Bug
1051033.
<LW2> 1/27/93 PW Changed kSlow to scsiTransferPolled.
<SM14> 12/9/92 PW Removed scsiDoVirtualMap flag so I had to remove its use in
BootItt.
<SM13> 12/5/92 PW Changed some names mostly.
<SM12> 12/4/92 CB Added Support for booting drives with a non-512 byte block size.
(CD-ROMs, some MOs etc.)
<SM11> 11/24/92 PW Narrowed check for same VID info to only same bus for old driver
loading qualification.
<SM10> 11/20/92 DCB Added explicit clear of the scsiCompletion field and setup of the
length field for SCSIActions
<SM9> 10/30/92 DCB Added a workaround for the Conner bug so that we can boot with
those drives.
<SM8> 10/8/92 DCB Changed offset for new driver loading to 8 bytes. This gives
driver writers greater flexibility.
<SM7> 10/8/92 PW (dcb) Added support for variable sized SCSI_IOs. Lots of
trivial name changes.
<SM6> 9/17/92 PW Changed SCSI_DriverPB to SCSI_Driver_PB.
<SM5> 8/31/92 DCB Fixed a problem with reading partition maps that had more than
one driver entry which caused disks to not mount.
<SM4> 8/20/92 DCB Changed boot code so it no longer used Select w/Atn to solve a
problem with Conner drives.
<SM3> 7/28/92 PW Resolve differences between pdw and (d)cb sources.
<SM2> 7/28/92 PW Added this comment.
<0> 6/24/92 DCB New Today
*/
#include <Types.h>
#include <Packages.h>
#include <Memory.h>
#include <Traps.h>
#include <OSUtils.h>
#include <TrapsPrivate.h>
#include <SysEqu.h>
#include <SCSIStandard.h>
#include <SCSI.h>
#include <OSUtils.h>
#include <Devices.h>
#include <Slots.h>
#include <Start.h>
//#include "IPLRecord.h"
#include "SCSIDebug.h"
#include "CUtils.h"
#include "ACAM.h"
#include "XPT.h"
#include "XPTpriv.h"
#include "BootItt.h"
short ScanDrive( DevInfo *, BootInfo *, Boolean * forceBootablePtr);
short AttemptDriverLoad( DevInfo *, BootInfo *, Boolean * forceBootablePtr);
short ScRead(DevInfo *, ulong, ulong,ushort, Ptr);
ulong CheckSumDrvr( Ptr driver,ushort length );
void SetLoadFlag( BootInfo * BInfo, DeviceIdent devIdent);
short LoadDriver( DevInfo *, ulong, ulong, Boolean, Ptr, Ptr, Partition * );
Boolean Ck4EjectableVolume( short drvrRefNum);
void DummyOldCallRead( short scsiID);
#define DONT_WAIT 1
#define KEEP_WAITING 0
/*————————————————————————————————————————————————————————————————————————
ISITT -
————————————————————————————————————————————————————————————————————————*/
Boolean ISITT()
{
return( NGetTrapAddress(SCSIATOM, OSTrap) !=
NGetTrapAddress(UNIMPTRAP, ToolTrap) );
}
/*————————————————————————————————————————————————————————————————————————
INITSCSIBOOT -
————————————————————————————————————————————————————————————————————————*/
void INITSCSIBOOT( void )
{
BootInfo *BInfo;
ushort numBuses, bus;
XPTglobals *XPTg; // We will store our globals with the XPTs globals
SCSIBusInquiryPB scPB; // Info about the scsi buses
SCSIGetVirtualIDInfoPB vidPB; // to determine (at init time) if we need to mask in SCSIDrvrs
#if ForROM
#if !forIttInit
char macIDpram;
// Since the XPT isn't loaded at PrimaryInit and since SecondaryInit is too late
// to load a SCSI Interface Module (SIM) we are going to try and help NuBus and
// PDS developers out by loading SIMs here at the start of StartSearch. We do
// this by loading sRSRCs of Category CatIntBus and cType TypSIM. Slots are
// searched for sRSRCs of this type and then loaded as a driver.
SpBlock tempSp; // Slot Manager PB used to locate SIMs
SpBlock loadSp; // Slot Manager PB used to load SIMs
SEBlock simSe; // exec block that will be passed to each slot SIM
/* Start with slot zero and look from there... */
tempSp.spSlot = 0; tempSp.spID = 0; tempSp.spExtDev = 0;
tempSp.spDrvrHW = 0; tempSp.spHwDev = 0;
tempSp.spTBMask = 3; /* don't pay attention to hardware or software vendors */
tempSp.spCategory = CatIntBus;
tempSp.spCType = TypSIM;
tempSp.spDrvrSW = DrvrSwScsi43;
while( SNextTypeSRsrc((SpBlockPtr)&tempSp) == noErr ) {
loadSp = tempSp; /* Don't touch the original parameter block or SNext Loop will get
screwed up and will start at the begining again */
simSe.seSlot = loadSp.spSlot;
simSe.sesRsrcId = loadSp.spID;
loadSp.spsExecPBlk = (Ptr)&simSe;
if (noErr == SGetDriver((SpBlockPtr)&loadSp)) {
SOpenDriver((SpBlockPtr)&loadSp);
}
}
// Old SCSI Manager compatibility ————
// Certain old applications and SCSI utilities use the SCSIDrvrs lo-mem. We'll generate
// it's default value here by setting the host ID bit (found in byte 2 of PRAM).
ReadXPRam( 1, 0x02, &macIDpram); // read 1 byte at location 2
SCSIDrvrs = 1 << ( macIDpram & 0x07 ); // set bit at host ID
#endif
#endif
Clear( (char *)&scPB, sizeof(scPB));
Clear( (char *)&vidPB, sizeof(vidPB));
// Find out how manuy buses there are in the sytem and alloc a BootInfo with that many IDmasks on the end
scPB.scsiDevice.bus = -1; // XPT=-1
scPB.scsiFlags = 0;
scPB.scsiFunctionCode = SCSIBusInquiry;
scPB.scsiPBLength = sizeof(SCSIBusInquiryPB); // <SM10>
scPB.scsiCompletion = nil; // <SM10>
SCSIAction( (SCSI_PB *) &scPB );
if ( scPB.scsiResult != noErr) {
DebugStr("\pInitSCSIBoot:BusInquiry failed getting numBuses");
}
numBuses = scPB.scsiHiBusID + 1;
if( (BInfo = (BootInfo *)NewPtrSysClear(sizeof(BootInfo) + sizeof(ulong) * numBuses)) == nil )
return;
// Get PRAM, Set up the BInfo and store it (in XPT's globals)
GetDefaultStartup( &(BInfo->startPRAM));
BInfo->BusCount = numBuses;
BInfo->defltDrvrRefNum = KEEP_WAITING;
XPTg = GetXPTg();
XPTg->BootStorage = (Ptr)BInfo;
// Start with the mask so far of the drivers that we
// loaded at original boot time. This is only needed
// when we're running as an init or a patch (i.e. on Quadras).
for (bus = 0; bus <= scPB.scsiHiBusID; bus+=1) {
BInfo->IDmasks[bus] = SCSIDrvrs; // change to check VirtualID!!!%%%_debugger
vidPB.scsiDevice.bus = bus;
vidPB.scsiDevice.targetID = 0;
vidPB.scsiFlags = 0;
vidPB.scsiFunctionCode = SCSIGetVirtualIDInfo;
vidPB.scsiPBLength = sizeof(SCSIGetVirtualIDInfoPB);
vidPB.scsiCompletion = nil;
SCSIAction( (SCSI_PB *) &vidPB );
if ( vidPB.scsiResult != noErr) { // !!! _debugger WE NEED TO DO SOMETHING WITH THIS
}
}
}
/*————————————————————————————————————————————————————————————————————————
IttBoot -
————————————————————————————————————————————————————————————————————————*/
short
ITTBOOT( ulong onlyStartup, Boolean * forceBootPtr )
{
SCSIGetVirtualIDInfoPB getVIDPB; /* for scanning for refNum-driven startup */
SCSIBusInquiryPB biPB; /* Info about the scsi busses */
BootInfo * BInfo;
SCSI_IO * ioPtr; /* Our SCSI Parameter block */
uchar busID; /* Current scsi bus */
char hostSCSIID; /* host Mac SCSI ID */
char highestSCSIID; /* highest SCSI ID on this bus */
char scsiID; /* Current target */
DevInfo device; /* Current Device */
DevInfo fakeScanDevice; /* Device ident used for fake scan of boot ID on higher priority buses */
DevInfo startdevice; /* Startup Device */
short defRefNum = 0; /* Default refnum for startup */
short forceBootRefNum =0; /* Force boot (from specially marked ejectable media) */
XPTglobals *XPTg; /* We will store our globals with the XPTs globals */
ulong longPRAM;
ushort PRAMRefNum;
char * trashBlockPtr;
ushort maxSCPBSize; // The largest PB we will need <SM7> pdw
Boolean foundBus;
Boolean csodKeysDown;
Boolean forcedBoot;
Boolean unknownPRAM; // set when we figure out that we can't figure it out
//——— Initialization ———
XPTg = GetXPTg();
BInfo = (BootInfo *) XPTg->BootStorage;
if ( (*(short *)(lm_KeyMap + 6) == (short) CmdShiftOptDel) && !Ck4IgnoreCmdShOptDel()) {
csodKeysDown = true;
bset( kbCSOD, &(XPTg->flags));
}
else
csodKeysDown = false;
// Initialize our 2 much-used PBs
Clear( (char *)&biPB, sizeof(biPB));
biPB.scsiFunctionCode = SCSIBusInquiry;
biPB.scsiPBLength = sizeof(SCSIBusInquiryPB);
Clear((char *)&getVIDPB, sizeof(getVIDPB));
getVIDPB.scsiFunctionCode = SCSIGetVirtualIDInfo;
getVIDPB.scsiPBLength = sizeof(SCSIGetVirtualIDInfo);
// Find out just how big our ioPB needs to be
biPB.scsiDevice.bus = -1; // XPT (we're getting max size of all bus's PBs)
SCSIAction( (SCSI_PB *) &biPB );
if ( biPB.scsiResult != noErr) {
IfDebugStr("\pIttBoot:BusInquiry failed getting maxSCPBSize");
return (DONT_WAIT);
}
maxSCPBSize = biPB.scsiMaxIOpbSize;
// Initialize a 1 block trash buffer for our use
if( (trashBlockPtr = NewPtrSysClear(0x200)) == nil )
return (DONT_WAIT); /* Try and boot with a driver that is already loaded... */
// Initialize a SCSI_IO parameter block for our use
if( (ioPtr = (SCSI_IO *)NewPtrSysClear(maxSCPBSize)) == nil )
return (DONT_WAIT); /* Try and boot with a driver that is already loaded... */
ioPtr->scsiPBLength = maxSCPBSize;
device.ioPB = ioPtr; /* Remember PB for later use */
startdevice.ioPB = ioPtr; /* Remember PB for later use */
//——— Deal with Default Boot Device first ———
// Determine the type of PRAM
unknownPRAM =false;
// If slot style PRAM... (new style)
if( (BInfo->startPRAM.slotDev.sdSlotNum & 0xF0) == 0 ) {
// Loop through Buses looking for one with this slot number and sRsrc ID
foundBus = false;
for( busID = 0; busID < BInfo->BusCount; busID+=1 ) {
biPB.scsiDevice.bus = busID;
SCSIAction( (SCSI_PB *) &biPB ); /* Get info for the internal (first) bus */
if ( biPB.scsiResult != noErr)
DebugStr("\pIttBoot:BusInquiry failed getting scsiHBAslotNumber");
if( biPB.scsiHBAslotNumber == BInfo->startPRAM.slotDev.sdSlotNum &&
biPB.scsiSIMsRsrcID == BInfo->startPRAM.slotDev.sdSRsrcID ) {
device.DevIdent.diReserved = 0;
device.DevIdent.bus = busID;
device.DevIdent.targetID = (BInfo->startPRAM.slotDev.sdExtDevID>>3) & 0x1f; // upper 5 bits
device.DevIdent.LUN = BInfo->startPRAM.slotDev.sdExtDevID & 0x07; // lower 3 bits
if( device.DevIdent.LUN ) // Only do select w/atn + identify message for non-zero luns
device.IdentMsg = true;
else
device.IdentMsg = false;
foundBus = true;
break; // from for loop
}
}
if (!foundBus)
defRefNum = DONT_WAIT; // don't wait anymore
else
{
startdevice = device;
// Don't load a driver from the startup device if CmdShiftOptDel keys are down
if ( csodKeysDown ) {
defRefNum = DONT_WAIT; // Tell WaitForInternal to stop trying
bset( kbCSODatBoot, &(XPTg->flags));
}
else {
// hit each device at this ID that might want higher priority VID mapping
for( busID=0; busID<device.DevIdent.bus; busID+=1 ) {
biPB.scsiDevice.bus = busID;
SCSIAction( (SCSI_PB *) &biPB );
fakeScanDevice = device;
fakeScanDevice.DevIdent.LUN = 0; // we just want to see if there's a device there
if( biPB.scsiFeatureFlags & scsiBusOldCallCapable ) {
/* Read block 0 of each device at this ID on other buses */
fakeScanDevice.DevIdent.bus = busID;
ScRead( &device, 0, 1, 512, trashBlockPtr );
}
}
// then try to load the driver for our specified boot device
if( TestLoadFlag( BInfo, startdevice.DevIdent) ) {
// we already hit the boot device, so we return that value
defRefNum = BInfo->defltDrvrRefNum;
}
else {
defRefNum = AttemptDriverLoad( &startdevice, BInfo, forceBootPtr);
BInfo->defltDrvrRefNum = defRefNum;
}
}
}
}
// if the PRAM is a fixed drefnum for a SCSI device... (old style)
else
{
startdevice.DevIdent.bus = -1; // dummy value for now
longPRAM = *(ulong *)&BInfo->startPRAM;
PRAMRefNum = (ushort) (longPRAM & 0xFFFF);
if( PRAMRefNum >= 0xFFD9 && PRAMRefNum <= 0xFFDF ) {
device.IdentMsg = false; // !!!
device.DevIdent.diReserved = 0;
device.DevIdent.bus = -1; // dummy value for now
device.DevIdent.targetID = ~PRAMRefNum - 32;
device.DevIdent.LUN = 0; /* Don't Scan LUNs */
// If we have an old ID mapping already, we simply use that bus
// else, we need to scan all of the oldCallCapable buses until -
// 1. we find a device (getVID.scsiExists == true) or,
// 2. we run out of buses
getVIDPB.scsiOldCallID = device.DevIdent.targetID;
SCSIAction((SCSI_PB *) &getVIDPB);
if ( getVIDPB.scsiResult != noErr) {
IfDebugStr("\pIttBoot:getVID failed");
return (DONT_WAIT); // don't wait for it
}
if ( !getVIDPB.scsiExists ) // doesn't already exist? scan
{
// Scan OldCallCapable bus(es) until finding VID or running out of buses
for ( busID = 0; busID<BInfo->BusCount; busID+=1 ) {
biPB.scsiDevice.bus = busID;
SCSIAction( (SCSI_PB *) &biPB );
if( !(biPB.scsiFeatureFlags & scsiBusOldCallCapable))
continue;
DummyOldCallRead( device.DevIdent.targetID);
// if old-ID mapping now exists, then no more scanning
SCSIAction((SCSI_PB *) &getVIDPB);
if ( getVIDPB.scsiExists ) {
break; // get out of loop
}
}
}
// after scan, if old-ID mapping now exists, this is the bus
if (getVIDPB.scsiExists)
{
device.DevIdent.bus = getVIDPB.scsiDevice.bus;
startdevice = device;
if( TestLoadFlag( BInfo, device.DevIdent) ) {
// we already hit the boot device, so we return that value
defRefNum = BInfo->defltDrvrRefNum;
}
else if (csodKeysDown) {
defRefNum = DONT_WAIT; // Don't WaitForInternal search keep trying
bset( kbCSODatBoot, &(XPTg->flags));
}
else {
defRefNum = AttemptDriverLoad( &device, BInfo, forceBootPtr);
BInfo->defltDrvrRefNum = defRefNum;
}
}
else
defRefNum = KEEP_WAITING; // no device yet - keep waiting
}
else // unknown PRAM format
{
unknownPRAM = true;
defRefNum = DONT_WAIT; // don't wait anymore
}
}
// If we're not supposed to continue on and look for other disks, let's exit here
if( onlyStartup || Ck4OnlyLoadFromDefault() ) {
DisposPtr( (Ptr)ioPtr );
DisposPtr( trashBlockPtr );
return (defRefNum);
}
//——— Scan all buses for other disks ———
*forceBootPtr = false;
for( busID = 0; busID < BInfo->BusCount; busID+=1 ) {
biPB.scsiDevice.bus = busID;
SCSIAction( (SCSI_PB *) &biPB ); /* Get info for this bus */
if ( biPB.scsiResult != noErr)
DebugStr("\p IttBoot:BusInquiry failed getting scsiMaxTarget");
highestSCSIID = biPB.scsiMaxTarget;
hostSCSIID = biPB.scsiInitiatorID;
for( scsiID = highestSCSIID; scsiID >= 0; scsiID-=1 ) {
if (scsiID == hostSCSIID) {
continue;
}
device.DevIdent.diReserved = 0;
device.DevIdent.bus = busID;
device.DevIdent.targetID = scsiID;
device.DevIdent.LUN = 0; /* Don't Scan LUNs */
device.IdentMsg = false; // !!!
if( TestLoadFlag(BInfo,device.DevIdent) ) {
continue; /* We have already made a decision on this */
}
if (unknownPRAM || !csodKeysDown) {
forceBootRefNum = AttemptDriverLoad( &device, BInfo, &forcedBoot);
}
else if( device.DevIdent != startdevice.DevIdent) {
bset( kbCSODatScan, &(XPTg->flags));
forceBootRefNum = AttemptDriverLoad( &device, BInfo, &forcedBoot);
}
// If this last one was a force boot, remember that and its refNum
if ( forcedBoot && forceBootRefNum<0) {
*forceBootPtr = true;
defRefNum = forceBootRefNum;
}
}
}
DisposPtr( (Ptr)ioPtr );
DisposPtr( trashBlockPtr );
return (defRefNum);
}
/*————————————————————————————————————————————————————————————————————————
AttemptDriverLoad -
————————————————————————————————————————————————————————————————————————*/
/* Attempt to load a driver for this device
**
** First ask the SIM to try. If the SIM doesn't know how to do this or
** if it fails then we look at the device and try to load a driver from
** the device. Failing this we again ask the SIM to try. This allows
** SIMs to either over-ride drivers on the device or only install an emergency
** "There wasn't any other driver to boot with" driver
*/
short // refNum
AttemptDriverLoad(
DevInfo * devInfoPtr,
BootInfo * BInfo,
Boolean * forceBootablePtr )
{
SCSILoadDriverPB LoadPB; /* PB for Loading SIM Drivers */
short dRefNum; /* The driver we loaded */
OSErr err;
Clear((char *)&LoadPB,sizeof(LoadPB));
dRefNum = 0; // 0 means we haven't found it but we haven't given up
LoadPB.scsiDevice = devInfoPtr->DevIdent;
LoadPB.scsiCompletion = 0;
LoadPB.scsiDiskLoadFailed = 0;
LoadPB.scsiPBLength = sizeof(LoadPB);
LoadPB.scsiFunctionCode = SCSILoadDriver;
err = SCSIAction( (SCSI_PB *) &LoadPB );
if( err != 0 || LoadPB.scsiLoadedRefNum == 0 ) {
dRefNum = ScanDrive( devInfoPtr, BInfo, forceBootablePtr);
if( dRefNum == 0 ) {
LoadPB.scsiDiskLoadFailed = 1;
if( SCSIAction( (SCSI_PB *) &LoadPB ) == noErr )
dRefNum = LoadPB.scsiLoadedRefNum;
}
}
else {
dRefNum = LoadPB.scsiLoadedRefNum; // <LW16> DCB
}
return ( dRefNum );
}
/*————————————————————————————————————————————————————————————————————————
ScanDrive -
————————————————————————————————————————————————————————————————————————*/
/* Scan The partition map for a driver and try to load it
**
** First Examine the driver map in block 0
** If it was valid Load in Block 1 and find out if it is a new partition map
** If not we load the driver and assume it is of type "Apple_Driver"
** If it is a new map we scan for a Driver Partition Map which matches the
** Entry in the driver map (Block 0) and the first HFS Partition
** If all of that succeeds we attempt to load the driver. "Apple_Driver43"s get
** a device Ident in d5 while older "Apple_Drivers" get a SCSI ID.
*/
short
ScanDrive(
DevInfo * devInfoPtr,
BootInfo * BInfo,
Boolean * forceBootablePtr )
{
Block0 *realBlock0; /* a buffer for block zero (Physical) */
Partition *curBlock; /* the current block we are working on */
Partition *HFSBlock; /* first HFS Partition map entry */
Partition *drvrBlock; /* Driver's Partition map entry */
ddMap *bootDrvr; /* Scratch */
ushort d; /* driver index (for scanning DDM) */
ulong drvrBlockStart; /* The starting block number of the driver */
ushort drvrSize; /* The size (in blocks) of the driver */
ulong b; /* partition block number index */
Boolean drvrIs43; /* false if old, true if new (4pt3) */
short dRefNum; /* The driver we loaded */
short partMapCount; /* Length of partition map */
ulong DDMBlockNum; /* block number of DDM */
uchar osType; /* OS Type read from PRAM */
// Initialize and alloc needed memory
dRefNum = KEEP_WAITING; /* don't have it yet - haven't given up */
HFSBlock = drvrBlock = curBlock = nil; /* Nobody home yet - needed for cleanup */
if( (realBlock0 = (Block0 *) NewPtrSysClear(512)) == nil )
goto Cleanup; /* Punt */
if( (curBlock = (Partition *) NewPtrSysClear(512)) == nil )
goto Cleanup; /* Punt */
// Read block 0 and see if it is a DDM or an IPLRecord or neither
if( ScRead( devInfoPtr, 0, 1, 512, (Ptr) realBlock0) ) /* Get block 0 (DDM/IPLRecord?) */
goto Cleanup;
if( realBlock0->sbSig == sbSIGWord ) { // udoublet at 0
DDMBlockNum = 0;
}
else if( ( (ipl_rec_area *)realBlock0 )->IPL_record_id == IPLRECID) { // uquadlet at 0
DDMBlockNum = ( (ipl_rec_area *)realBlock0 )->boot_prg_start;
if( ScRead( devInfoPtr, DDMBlockNum, 1, 512, (Ptr) realBlock0) )
goto Cleanup;
}
else {
SetLoadFlag(BInfo,devInfoPtr->DevIdent); /* Don't try me again! */
goto Cleanup;
}
// Scan through drivers in DDM to find one that matches our OSType
ReadXPRam( 1, 0x77, &osType);
for( drvrBlockStart = 0, bootDrvr = (ddMap *)&realBlock0->ddBlock, d = 0 ; d < realBlock0->sbDrvrCount ; d+=1 ) {
if( bootDrvr[d].ddType == osType) {
drvrBlockStart = bootDrvr[d].ddBlock + DDMBlockNum;
drvrSize = bootDrvr[d].ddSize;
break;
}
}
if( drvrBlockStart == 0 ) { /* No Drivers in ddm */
SetLoadFlag(BInfo,devInfoPtr->DevIdent); /* Don't try me again! */
dRefNum = DONT_WAIT;
goto Cleanup;
}
// Read first block of part map to determine if it's valid and to find part map length
if( ScRead( devInfoPtr, DDMBlockNum+1,1,512,(Ptr)curBlock) ) {
SetLoadFlag(BInfo,devInfoPtr->DevIdent); /* Don't try me again! */
goto Cleanup;
}
if( curBlock->pmSig != newPMSigWord ) { /* Old Style PMap or one we don't recognize */
/* Be friendly and try to boot it anyway */
if( TestLoadFlag(BInfo,devInfoPtr->DevIdent) == 0 )
dRefNum = LoadDriver(devInfoPtr,drvrBlockStart,drvrSize,false, (Ptr)realBlock0,(Ptr)curBlock, 0); // <SM12>
SetLoadFlag(BInfo,devInfoPtr->DevIdent);
goto Cleanup;
}
// Scan through part map to find HFS and driver partitions
for( b=1, drvrIs43 = 0, partMapCount = curBlock->pmMapBlkCnt ; b <= partMapCount ; b+=1 ) {
if( ScRead( devInfoPtr, DDMBlockNum+b, 1, 512, (Ptr)curBlock) ) {
SetLoadFlag( BInfo, devInfoPtr->DevIdent); /* Don't try me again! */
goto Cleanup;
}
if( drvrBlock == 0 &&
*(long *) &curBlock->pmParType[0] == 'Appl' &&
*(long *) &curBlock->pmParType[4] == 'e_Dr' &&
*(long *) &curBlock->pmParType[8] == 'iver' ) {
if( curBlock->pmPyPartStart != drvrBlockStart - DDMBlockNum) // <SM5>
continue; /* Whoops, not the driver from the DDM! */ // <SM5>
drvrIs43 = (*(short *)&(curBlock->pmParType[12]) == '43') ? true : false; // <SM7>
*forceBootablePtr = (*(long *)&(curBlock->pmParType[28]) == 'pdm!') ? true : false;
drvrBlock = curBlock;
if( (curBlock = (Partition *) NewPtrSysClear(512)) == nil )
goto Cleanup; /* Punt */
}
else if( HFSBlock == 0 &&
*(long *) &curBlock->pmParType[0] == 'Appl' &&
*(long *) &curBlock->pmParType[4] == 'e_HF' &&
curBlock->pmParType[8] == 'S' ) {
HFSBlock = curBlock;
if( (curBlock = (Partition *) NewPtrSysClear(512)) == nil )
goto Cleanup; /* Punt */
}
if( drvrBlock && HFSBlock )
break; // <SM5>
}
// Load the driver whether we found an HFS partition or not <SM5>
if( HFSBlock) {
if( TestLoadFlag( BInfo, devInfoPtr->DevIdent) == 0 ) {
dRefNum = LoadDriver( devInfoPtr, drvrBlockStart, drvrSize, drvrIs43, (Ptr)realBlock0, (Ptr)HFSBlock, drvrBlock ); // <SM12>
SetLoadFlag( BInfo, devInfoPtr->DevIdent);
}
}
if (*forceBootablePtr)
*forceBootablePtr = Ck4EjectableVolume( dRefNum);
Cleanup:
if( realBlock0 )
DisposPtr((Ptr) realBlock0);
if( curBlock )
DisposPtr((Ptr) curBlock);
if( HFSBlock )
DisposPtr((Ptr) HFSBlock);
if( drvrBlock )
DisposPtr((Ptr) drvrBlock);
return (dRefNum);
}
/*————————————————————————————————————————————————————————————————————————
LoadDriver -
————————————————————————————————————————————————————————————————————————*/
short
LoadDriver(
DevInfo * devInfoPtr,
ulong DrvrStart,
ulong DrvrLength,
Boolean NewDrvr,
Ptr BZero, // <SM12>
Ptr HFSBlock,
Partition * drvrBlock )
{
#pragma unused (drvrBlock)
Ptr theDrvr;
short dRefNum;
SCSI_Driver_PB myPB;
SCSIGetVirtualIDInfoPB myVIDpb;
//--- Check to see if it's OK to load and install the driver
Clear((char *)&myPB, sizeof(myPB));
Clear((char *)&myVIDpb, sizeof(myVIDpb));
if( NewDrvr) { //--- Driver43 ---
myPB.scsiDevice = devInfoPtr->DevIdent;
myPB.scsiCompletion = nil;
myPB.scsiPBLength = sizeof(SCSI_Driver_PB);
myPB.scsiFunctionCode = SCSILookupRefNumXref;
SCSIAction((SCSI_PB *) &myPB);
dRefNum = myPB.scsiDriver;
if( dRefNum != 0 )
return (dRefNum); /* Already installed */
}
else { //--- Old style driver --- <SM10>
//--- Don't load old driver if SCSI ID is 7 or higher
if( devInfoPtr->DevIdent.targetID >= 7)
return (DONT_WAIT);
//--- Don't load old driver if device doesn't match VirtualIDInfo
myVIDpb.scsiOldCallID = devInfoPtr->DevIdent.targetID;
myVIDpb.scsiFunctionCode = SCSIGetVirtualIDInfo;
SCSIAction((SCSI_PB *) &myVIDpb); // get the info about this ID
if (myVIDpb.scsiExists && myVIDpb.scsiDevice.bus != devInfoPtr->DevIdent.bus) //<SM11> pdw
return (DONT_WAIT);
//--- Don't load it if a driver is already installed at the static drvr slot for this ID
dRefNum = ~(devInfoPtr->DevIdent.targetID + 32); /* Convert SCSI ID to DRefNum */
if( GetDCtlEntry(dRefNum) != nil )
return (DONT_WAIT);
}
//--- Now try to load the driver and do a checksum on it
if( (theDrvr = NewPtrSys(DrvrLength * ((Block0 *)BZero)->sbBlkSize)) == nil ) // <SM12>
return (DONT_WAIT); /* No memory - give up */
if( ScRead( devInfoPtr, DrvrStart, DrvrLength, ((Block0 *)BZero)->sbBlkSize, theDrvr) ) {
DisposPtr(theDrvr);
return (KEEP_WAITING);
}
FlushInstructionCache();
FlushDataCache();
if( drvrBlock && *(long *)drvrBlock->pmPartName == 'Maci' ) {
/* !!! Why do a long comparison when the checksum routine returns a short ?
I don't have any idea - but this is the way the original SCSIBoot.a file
did it so I will continue to do it the same way until further notice. -DCB
*/
if( (ulong) drvrBlock->pmBootCksum != CheckSumDrvr( theDrvr,drvrBlock->pmBootSize ) ) {
DisposPtr(theDrvr);
return (DONT_WAIT);
}
}
//--- Jump to driver
if( NewDrvr ) { //--- Driver43 (NOTE! Driver43s start at Driver + 8 bytes!!!
JmpToDrvr( *(ulong *)&devInfoPtr->DevIdent, theDrvr + 8, BZero, HFSBlock); // <SM8>
/* Find out where the driver installed itself */
myPB.scsiDevice = devInfoPtr->DevIdent;
myPB.scsiCompletion = nil;
myPB.scsiPBLength = sizeof(SCSI_Driver_PB);
myPB.scsiFunctionCode = SCSILookupRefNumXref;
SCSIAction((SCSI_PB *) &myPB);
return (myPB.scsiDriver);
}
else { //--- Old style driver
JmpToDrvr( devInfoPtr->DevIdent.targetID, theDrvr, (Ptr) BZero, HFSBlock); //!!! Add At_App_Time
dRefNum = ~(devInfoPtr->DevIdent.targetID + 32); /* Convert SCSI ID to DRefNum */
if( GetDCtlEntry(dRefNum) == nil )
return (DONT_WAIT); /* Something went wrong - didn't install */
/* Ok, it installed - register it with the SCSI Manager */
myPB.scsiDevice = devInfoPtr->DevIdent;
myPB.scsiPBLength = sizeof(SCSI_Driver_PB);
myPB.scsiDriver = dRefNum;
myPB.scsiFunctionCode = SCSICreateRefNumXref;
SCSIAction((SCSI_PB *) &myPB);
return (dRefNum);
}
}
/*————————————————————————————————————————————————————————————————————————
SetLoadFlag -
————————————————————————————————————————————————————————————————————————*/
void
SetLoadFlag( BootInfo * BInfo, DeviceIdent devIdent)
{
SCSIGetVirtualIDInfoPB getVIDPB;
Clear((char *)&getVIDPB, sizeof(getVIDPB));
BInfo->IDmasks[ devIdent.bus] |= (1 << devIdent.targetID);
getVIDPB.scsiOldCallID = devIdent.targetID;
getVIDPB.scsiFunctionCode = SCSIGetVirtualIDInfo;
SCSIAction((SCSI_PB *) &getVIDPB); // get the info about this ID
if ( getVIDPB.scsiExists && (getVIDPB.scsiDevice.bus == devIdent.bus))
SCSIDrvrs |= 1<<devIdent.targetID;
}
/*————————————————————————————————————————————————————————————————————————
ScRead -
————————————————————————————————————————————————————————————————————————*/
short /* !!! OSErr? */
ScRead(
DevInfo *devInfoPtr,
ulong block,
ulong length,
ushort blocklen, // <SM12>
uchar *buffer )
{
uchar *cmd;
cmd = (uchar *)&(devInfoPtr->ioPB->scsiCDB);
/* 10 byte commands are easier but the @#$%^&*! Connor 40s don't return real data from
the FIRST 10 byte command after a reset or power on. Therefore we issue 6 byte commands
unless the data requested exceeds the addressing capacity of a 6 byte command.
<SM9>
*/
if( (block & 0xFFE00000) || (length & 0xFFFFFF00) ) { // <SM9>
cmd[0] = 0x28; /* Properly pumped up 10 byte scsi command */
cmd[1] = 0; /* !!! Add support for embedded luns? */
cmd[2] = block>>24;
cmd[3] = block>>16;
cmd[4] = block>>8;
cmd[5] = block;
cmd[6] = 0; /* reserved */
cmd[7] = length>>8;
cmd[8] = length;
cmd[9] = 0; /* reserved */
devInfoPtr->ioPB->scsiCDBLength = 10;
}
else {
cmd[0] = 0x8; /* Wimpy 6 byte command */
cmd[1] = block>>16 & 0x1f; /* !!! Add support for embedded luns? */
cmd[2] = block>>8;
cmd[3] = block;
cmd[4] = length;
cmd[5] = 0; /* reserved */
devInfoPtr->ioPB->scsiCDBLength = 6;
}
devInfoPtr->ioPB->scsiDataPtr = buffer;
devInfoPtr->ioPB->scsiDataLength = length * blocklen; /* <SM12> */
devInfoPtr->ioPB->scsiFlags = scsiDirectionIn | scsiSIMQNoFreeze | scsiDisableAutosense;
devInfoPtr->ioPB->scsiIOFlags = scsiNoParityCheck;
if( devInfoPtr->IdentMsg == 0 )
devInfoPtr->ioPB->scsiIOFlags |= scsiDisableSelectWAtn;
devInfoPtr->ioPB->scsiDevice = devInfoPtr->DevIdent;
devInfoPtr->ioPB->scsiFunctionCode = SCSIExecIO;
devInfoPtr->ioPB->scsiCompletion = nil;
devInfoPtr->ioPB->scsiTransferType = scsiTransferPolled;
SCSIAction( (SCSI_PB *) devInfoPtr->ioPB);
if( devInfoPtr->ioPB->scsiSCSIstatus ) // status will be cleared upon entry to SIMAction
SCSIAction( (SCSI_PB *) devInfoPtr->ioPB); /* Retry, to clear out unit attention */
if( devInfoPtr->ioPB->scsiResult == scsiDataRunError ) // Not all drives are 512/block <LW10>
devInfoPtr->ioPB->scsiResult = noErr; // We don't discover this until after we load block zero
return( !(devInfoPtr->ioPB->scsiResult == noErr && devInfoPtr->ioPB->scsiSCSIstatus == 0) );
}
/*————————————————————————————————————————————————————————————————————————
SOpenDriver -
————————————————————————————————————————————————————————————————————————*/
OSErr SOpenDriver(SpBlockPtr sp)
{
OSErr err;
short refnum;
unsigned int count;
AuxDCEHandle myDCE;
DriverHeaderHandle driver;
unsigned char name [32];
ParamBlockRec ioPB;
driver = (DriverHeaderHandle) sp->spResult;
HLock((Handle) driver);
/* copy the driver name out of the driver header */
BlockMove((**driver).drvrName, name, 1 + (**driver).drvrName[0]);
for( count = 48; count < *(ulong *)UnitNtryCnt ; count+=1 ) {
refnum = ~count;
if( GetDCtlEntry(refnum) == 0 )
break; /* Use the first empty spot we find */
}
if( (err = DrvrInstallResrvMem(*driver, refnum)) != noErr )
return(err);
myDCE = (AuxDCE**)GetDCtlEntry(refnum);
(**myDCE).dCtlDriver = (Ptr)driver;
(**driver).drvrFlags |= 1 << dNeedLock << 8 | 1 << dRAMBased;
(**myDCE).dCtlFlags = (**driver).drvrFlags;
(**myDCE).dCtlDelay = (**driver).drvrDelay;
(**myDCE).dCtlEMask = (**driver).drvrEMask;
(**myDCE).dCtlMenu = (**driver).drvrMenu;
(**myDCE).dCtlSlot = sp->spSlot;
(**myDCE).dCtlSlotId = sp->spID;
(**myDCE).dCtlExtDev = sp->spExtDev;
ioPB.slotDevParam.ioVRefNum = 0;
ioPB.slotDevParam.ioFlags = 0;
ioPB.slotDevParam.ioPermssn = 0;
ioPB.slotDevParam.ioCompletion = 0;
ioPB.slotDevParam.ioMix = (Ptr)0;
ioPB.slotDevParam.ioNamePtr = name;
ioPB.slotDevParam.ioSlot = sp->spSlot;
ioPB.slotDevParam.ioID = sp->spID;
PBOpenSync(&ioPB);
if( ioPB.slotDevParam.ioResult < 0 ) {
DisposeHandle((Handle) driver); /* dispose the driver */
DisposeHandle((Handle) myDCE); /* dispose the DCE */
((long *)(*(long *)UTableBase))[count] = nil; /* clear the unit table entry */
}
return(ioPB.slotDevParam.ioResult);
}
/*————————————————————————————————————————————————————————————————————————
Ck4EjectableVolume -
————————————————————————————————————————————————————————————————————————*/
Boolean
Ck4EjectableVolume( short drvrRefNum)
{
DrvQEl * qElPtr;
char diskType;
qElPtr = (DrvQEl *)(GetDrvQHdr()->qHead);
while (qElPtr)
{
if (qElPtr->dQRefNum == drvrRefNum) {
diskType = *(( (char *)qElPtr )-3);
if ( diskType ==1 || diskType ==2)
return (true);
}
qElPtr = (DrvQEl *)(qElPtr->qLink);
}
return (false);
}
/*————————————————————————————————————————————————————————————————————————
DummyOldCallRead -
————————————————————————————————————————————————————————————————————————*/
void
DummyOldCallRead( short scsiID)
{
char cdb[6];
SCSIInstr tib[2];
char data[0x200];
short stat, msg;
tib[0].scOpcode = scInc;
tib[0].scParam1 = &data;
tib[0].scParam2 = 0x200;
tib[1].scOpcode = scStop;
tib[1].scParam1 = 0;
tib[1].scParam2 = 0;
cdb[0] = 0x08;
cdb[1] = 0x00;
cdb[2] = 0x00;
cdb[3] = 0x00;
cdb[4] = 0x01;
cdb[5] = 0x00;
SCSIGet();
if (SCSISelect( scsiID))
return;
if (!SCSICmd( cdb, 6))
SCSIRead( (Ptr)tib);
SCSIComplete( &stat, &msg, 60*60);
}
Reference in New Issue View Git Blame Copy Permalink