mirror of
https://github.com/elliotnunn/supermario.git
synced 2024-11-29 05:49:19 +00:00
301 lines
13 KiB
Plaintext
301 lines
13 KiB
Plaintext
Eject
|
||
************************************************************************
|
||
; EGRET Manager Equates
|
||
;
|
||
; File: EgretEqu.a
|
||
;
|
||
; Contains: Equate definitions used by EgretMgr.a
|
||
;
|
||
; Written by: Gus Andrade, Gary Rensberger
|
||
;
|
||
; Copyright: © 1990-1992 by Apple Computer, Inc., all rights reserved.
|
||
;
|
||
; Change History (most recent first):
|
||
;
|
||
; <SM6> 11/20/92 GS (rbm) Allocated one of the expansion variables in the Cuda
|
||
; globals for preserving any existing poll stack. Updated the
|
||
; 10ms delay to be a little longer. Renamed the Macsbug continue
|
||
; var to PDMDebugCont. for consistancy.
|
||
; <SM5> 10/7/92 GS Increase size of Cuda manager globals so that support for
|
||
; calling the resume procedure associated with power messages can
|
||
; be accessed externally.
|
||
; Added equates for debugger continue (Power Message Support).
|
||
; Added equates for asynchronous IIC traffic.
|
||
; <SM4> 9/18/92 GS Added Time out equates, and added a new Shutdown selector for
|
||
; the Macsbug Continue state.
|
||
; <SM3> 6/26/92 GS (RBM) Comment now says the WrDFAC is always DFAC mode.
|
||
; Eliminated SetDFACmode and replaced it with RdWrIIC. RdWrIIC is
|
||
; always I squared C mode. Expanded Egret parameter blocks so
|
||
; that the Cuda manager can have room for extensible features…
|
||
; Added equate for hardware based delay in SyncAck cycle (see
|
||
; CudaInit).
|
||
; <SM2> 5/22/92 RB Updated for new values used for Cuda in Pandora.
|
||
;
|
||
; SuperMario Change History:
|
||
;
|
||
; <11> 10/28/91 SAM/KSM Rolled in Regatta file.
|
||
;
|
||
; Regatta Change History:
|
||
;
|
||
; <3> 6/14/91 SAM (bg) Made this file look like the one in TERROR.
|
||
; <1> 6/12/91 SAM Split off from 7.0 GM sources.
|
||
;
|
||
; 7.0 Change History:
|
||
;
|
||
; <10> 1/30/91 gbm sab, #38: Change the ‘already including this file’ variable to
|
||
; all uppercase (for security reasons)
|
||
; <9> 5/8/90 GA Added Retry Count and Timeout count for SendEgretCmd new
|
||
; RetryCount and Timeout support in SendPtype.
|
||
; <7> 4/25/90 GA Added equates needed in EgretMgr to fix DFAC bug and Error
|
||
; reporting bug.
|
||
; <6> 4/10/90 GA Added equates to support the error checking code in EgretMgr.a
|
||
; <5> 4/2/90 GA Changing the ElsieDFAC back to $57 AGAIN!!!. The hardware people
|
||
; should make up their minds!
|
||
; <4> 3/30/90 GA Added equates for EricksonDFAC & ElsieDFAC
|
||
; <3> 2/28/90 GMR Modified to match new EgretMgr.a
|
||
; <2> 2/3/90 GA first checked in
|
||
; <1> 2/3/90 GA first checked in
|
||
;
|
||
; To Do:
|
||
;
|
||
************************************************************************
|
||
|
||
IF &TYPE('__INCLUDINGEGRETEQU__') = 'UNDEFINED' THEN
|
||
__INCLUDINGEGRETEQU__ SET 1
|
||
;
|
||
; Egret parameter block
|
||
;
|
||
|
||
EgretPB RECORD 0,increment
|
||
pbCmdType ds.b 1 ; command type
|
||
pbCmd ds.b 1 ; Egret command
|
||
pbParam ds.b 4 ; Generic parameter (Addr, Time, etc), if needed for this command
|
||
pbByteCnt ds.w 1 ; # bytes of send/rcv data, if needed for this command
|
||
pbBufPtr ds.l 1 ; ptr to send/receive data, if any
|
||
pbFlags ds.b 1 ; Egrets flags (from response packet)
|
||
ds.b 1 ; word align
|
||
pbResult ds.w 1 ; result code (if any)
|
||
pbCompletion ds.l 1 ; ptr to completion routine
|
||
EgretPBSize EQU *
|
||
ENDR
|
||
|
||
;________________________________________________________________________________________________
|
||
; Globals
|
||
|
||
EgretGlobals RECORD 0,increment
|
||
flags ds.w 1 ; Egret Manager state flags
|
||
|
||
sendHdrCnt ds.w 1 ; # bytes in command header to send
|
||
sendHdrPtr ds.l 1 ; ptr into command header
|
||
sendDataCnt ds.w 1 ; # data bytes to send for current cmd
|
||
sendDataPtr ds.l 1 ; ptr to next data byte to send
|
||
|
||
rcvHdrCnt ds.w 1 ; # bytes to receive in response header
|
||
rcvHdrIndex ds.w 1 ; current index into receive header buffer
|
||
rcvDataCnt ds.w 1 ; # data bytes to receive
|
||
rcvDataPtr ds.l 1 ; ptr into receive buffer
|
||
|
||
rcvHeader ds.b 12 ; temp buffer for response packet
|
||
|
||
completion ds.l 1 ; ptr to completion routine for current packet
|
||
tickComp ds.l 1 ; tick packet completion routine
|
||
PDMComp ds.l 1 ; Eclipse PowerDown Message Handler Vector <T2>
|
||
adbPb ds.l 1 ; ptr to ADB auto response param block
|
||
curPb ds.l 1 ; ptr to current param block
|
||
workPb ds.b EgretPB.EgretPBSize ; local parameter block for unsolicited packets
|
||
ds.b 4 ; expansion space for the Egret parameter block <SM3><3>
|
||
IICComp ds.l 1 ; vector to handler for asynchronous IIC traffic <SM5>
|
||
ContinueComp ds.l 1 ; vector to power message continue procedure <SM5>
|
||
deferredPDM ds.l 1 ; pointer to PDM deferred task to post alert <SM5>
|
||
prevPollStack ds.l 1 ; keep address of any other poll stack <SM6>
|
||
SpareComp3 ds.l 1 ; spare vector #3 <SM5>
|
||
EgretGlobSize EQU *
|
||
ENDR
|
||
|
||
;________________________________________________________________________________________________
|
||
; Response Packet
|
||
respPacket RECORD 0,increment ; record describing rcvHeader
|
||
length ds.b 1 ; number of bytes in rcvHeader (4+data count)
|
||
respType ds.b 1 ; packet type (0=ADB, 3=ticks)
|
||
respFlag ds.b 1 ; flags
|
||
respCmd ds.b 1 ; command
|
||
respData ds.b 8 ; data bytes that came in (ticks, adb data)
|
||
ENDR
|
||
|
||
;________________________________________________________________________________________________
|
||
; Record Descriptor for Response Packet Header
|
||
;
|
||
RespHeader RECORD 0,increment ; record descriptor for Response packet Header <T2>
|
||
RespAttn ds.b 1 ; Attention Byte <T2>
|
||
RespPktType ds.b 1 ; Packet type <T2>
|
||
RespFlags ds.b 1 ; Flags byte <T2>
|
||
RespCmd ds.b 1 ; Command number <T2>
|
||
RespData ds.b 8 ; Data area for ADB or Time data <T2>
|
||
ENDR ; <T2>
|
||
|
||
;________________________________________________________________________________________________
|
||
; Egret8 and Caboose Bit definitions
|
||
|
||
xcvrSes EQU 3 ; ADBu session PB3
|
||
viaFull EQU 4 ; Via full indicator PB4
|
||
sysSes EQU 5 ; System session is PB5
|
||
|
||
;________________________________________________________________________________________________
|
||
; Cuda VIA Bit Definitions
|
||
|
||
TReq EQU 3 ; CUDA transaction PB3 <P1>
|
||
vByteAck EQU 4 ; acknowledge byte transfer PB4 <P1>
|
||
TIP EQU 5 ; System transaction PB5 <P1>
|
||
|
||
ACRmode EQU %00001100 ; shift reg mode (input with ext clock)
|
||
SRdir EQU 4 ; shift reg direction bit (0=input, 1=output)
|
||
; from Cuda, from System
|
||
vShift EQU 2 ; shift reg interrupt bit
|
||
|
||
;
|
||
;_______________________________________________________________________
|
||
; Egret Manager Flag Bit Definitions
|
||
|
||
busy EQU 0 ; flag bit 0 means we're busy with a packet
|
||
openData EQU 1 ; flag bit 1 means this is an open ended read response
|
||
BadPkt EQU 2 ; flag bit 2 means 1= Error Packet in progress <7>
|
||
PBPending EQU 3 ; PB aborted and pending <T2>
|
||
|
||
IdleAckFlag EQU 4 ; flag bit 4 set means an IdleAck pkt expected (Cuda) <P1>
|
||
;
|
||
;_______________________________________________________________________
|
||
; Flag Bits in the ADB Status byte returned from the ADB processor
|
||
|
||
EgSRQ equ 0 ; bit 0, 1=SRQ asserted
|
||
EgTimeOut equ 1 ; bit 1, 1=Active device did not have data available
|
||
EgSRQError equ 2 ; bit 2, 1=Device asserted excessive SRQ period
|
||
EgBusError equ 3 ; bit 3, 1=Timing error in bit cell was detected
|
||
EgAutoPoll equ 6 ; bit 6, 1=Data is from an Auto Poll
|
||
EgResponse equ 7 ; bit 7, 1=Response packett in process
|
||
|
||
|
||
;________________________________________________________________________________________________
|
||
; Elsie/Erickson DFAC initial settings
|
||
|
||
ElsieDFAC equ $0057
|
||
EricksonDFAC equ $0000
|
||
EclipseDFAC equ $0010 ; initial dfac values for Eclipse and Spike <t3> djw
|
||
SpikeDFAC equ $0010
|
||
|
||
|
||
;________________________________________________________________________________________________
|
||
; Packet types
|
||
|
||
adbPkt EQU $0000 ; ADB request packet type
|
||
pseudoPkt EQU $0001 ; pseudo commands packet type
|
||
errorPkt EQU $0002 ; error packets type
|
||
tickPkt EQU $0003 ; Egret 1 second tick packet type
|
||
PDMPkt equ $0004 ; PowerDown Message Packet (From Egret) <T2>
|
||
IICPkt equ $0005 ; asynchronous IIC packet SM5
|
||
|
||
DoContinueProc equ $00FB ; execute the continue procedure <SM5>
|
||
ContinueVectPkt equ $00FC ; initialize the vector with the current continue PROC <SM5>
|
||
IICVectPkt equ $00FD ; asynchronous IIC message vector <SM5>
|
||
PDMVectPkt equ $00FE ; Eclipse Init PowerDown Message vector <T2>
|
||
specialPkt EQU $00FF ; used to install ADB handler/pb
|
||
|
||
AddrField equ 4 ; ADB address field in most significant nibble
|
||
ADBFlushCmd equ %00000001 ; Flush Command
|
||
ListenCmd equ %00001000 ; Listen Command
|
||
TalkCmd equ %00001100 ; Talk Command
|
||
TalkAnR3 equ TalkCmd|3 ; Talk Command - Address N, Register 3
|
||
TalkA2R0 equ TalkCmd|(2<<AddrField) ; Talk address 2, register 0
|
||
TalkA2R2 equ TalkCmd|(2<<AddrField)|2 ; Talk address 2, register 2
|
||
FlushKybd equ ADBFlushCmd|(2<<AddrField) ; flush the keyboard buffer
|
||
;
|
||
; Shutdown Initiators from SysFlag in Cuda FW.
|
||
;
|
||
FrmChassisSw equ $01 ; Initiate ShutDown from Chassis Power Switch
|
||
FrmKeyBdSw equ $02 ; Initiate ShutDown from KeyBoard Switch
|
||
FrmKeySw equ $05 ; Initiate ShutDown from Secure Key Switch
|
||
;
|
||
; Selectors of the Shutdown Initiator Codes
|
||
;
|
||
KeySwSecure Equ 2 ; keyswitch from ON to FS
|
||
KeySwOn Equ 1 ; keyswithc from FS to ON
|
||
KeySwPwrDn Equ 0 ; keyswitch from On to OFF - no User Alert
|
||
ChassisSwOff Equ 0 ; Chassis sw Off - no User Alert
|
||
KyBdSoftOff Equ 4 ; keyboard sw Off - User alert
|
||
;
|
||
; Selectors of the Power Down Message
|
||
;
|
||
PDMTurnOff EQU 0 ; disable PDM
|
||
PDMTurnOn EQU 1 ; enable PDM ^
|
||
PDMSuspend EQU 2 ; suspend PDM, for SoftOff |
|
||
PDMContinue EQU 3 ; resume PDM, for SoftOff <P5>
|
||
PDMDebugCont equ 4 ; restore PDM (turn PDM on if OFF & Suspended) <SM6>
|
||
|
||
;
|
||
;________________________________________________________________________________________________
|
||
; Pseudo commands
|
||
|
||
NopCmd equ $00
|
||
APoll equ $01 ; start/stop autopoll
|
||
Rd6805addr equ $02 ; read 6805 address
|
||
RdTime equ $03 ; read real time clock pseudo commmand
|
||
RdRomSize equ $04 ; get romsize command
|
||
RdRomBase equ $05 ; get rom base address
|
||
RdRomHeader equ $06 ; get rom header address
|
||
RdPram equ $07 ; read parameter ram
|
||
Wr6805Addr equ $08 ; write 6805 address
|
||
WrTime equ $09 ; write time command
|
||
PwrDown equ $0A ; Erickson powerdown command
|
||
WrPwrupTime equ $0B ; Erickson set powerup time
|
||
WrPram equ $0C ; write parameter ram
|
||
MonoReset equ $0D ; Monostable reset
|
||
WrDFAC equ $0E ; write DFAC (always DFAC mode) <SM3>[rbm]<3>
|
||
Egretdiags equ $0F ; run egret diagnostics
|
||
RdCtlPanel equ $10 ; Sense control panel enable
|
||
RdBattery equ $10 ; Sense if battery was changed <P1>
|
||
ResetEgret equ $11 ; Egret Cold start command
|
||
EnDisVpp equ $12 ; ELSIE enable/disabe VPP
|
||
SetIPL equ $12 ; Set IPL level <P1>
|
||
EnDisFiles equ $13 ; enable/disable file server flag
|
||
SetAutopoll equ $14 ; set autopoll rate
|
||
RdPramSize equ $15 ; get parameter ram size
|
||
RdAutoRate equ $16 ; get autopoll rate
|
||
WrBusDelay equ $17 ; set bus delay constant
|
||
RdBusDelay equ $18 ; get busdelay constant
|
||
WrDevList equ $19 ; set ADB device list
|
||
RdDevList equ $1A ; get ADB device list
|
||
Wr1SecMode equ $1B ; set 1 second interrupt mode
|
||
EnDisKbdNmi equ $1C ; enable/disable keyboard NMI
|
||
EnDisParse equ $1D ; enable/disable post parse R2 A2
|
||
WrHangTout equ $1E ; set hang threshold
|
||
RdHangTout equ $1F ; get hang threshold
|
||
SetDefDFAC equ $20 ; Set Default DFAC String <T2>
|
||
EnDisPDM equ $21 ; Enable/Disable PowerDown Message <T2>
|
||
RdWrIIC equ $22 ; Read or Write IIC (I sqared C) <SM3>[rbm]<3>
|
||
WakeUpMode equ $23 ; Enable/Disable WakeUpMode <P1>
|
||
TimerTickle equ $24 ; ShutDown Timer Tickle <P1>
|
||
MaxPseudoCmd equ TimerTickle ; largest possible pseudo command number <P1>
|
||
|
||
;
|
||
;__________________________________________________________________________________________________
|
||
; MISC Equates
|
||
|
||
|
||
InvPseudo equ $0202 ; Invalid Pseudo packet <6>
|
||
InvPkt equ $0201 ; Invalid Packet type <6>
|
||
|
||
Enable equ $00FF ; Nonzero to enable Egret functions <T2>
|
||
Disable equ $0000 ; Zero to disable Egret functions <T2>
|
||
MaxRetries equ $0100 ; 256 Retries to communicate with Egret in SendEgretCmd<9>
|
||
MaxTout equ $2000 ; timeout waiting for Vsr irq from Egret 10millsecs<9>
|
||
DelayCnt equ $0068 ; count for register base delay100us routine
|
||
EclipseDelay equ 00025 ; Extra delay required for Eclipse <T2>
|
||
PollStackSize equ $0020 ; 32 byte buffer for SCC Poll data
|
||
Mode3Clock equ $0003 ; Mode 3 packets for clock data
|
||
MRUAddr equ $00B3 ; MRU address in Egret/Caboose/Cuda <10>
|
||
LRUAddr equ $00B4 ; LRU address in Egret/Caboose/Cuda <10>
|
||
|
||
|
||
hw4msDelay equ 3333 ; constant for 4ms delay in DBRA loop w/ hardware access <SM3><2>
|
||
;hw10msDelay equ 9167 ; delay to exceed maximum auto poll period on CUDA. <SM5>
|
||
hw10msDelay equ 15000 ; delay to exceed maximum auto poll period on CUDA. <SM6>
|
||
ENDIF ; ...already included |