sys7.1-doc-wip/OS/NetBoot/ATBoot.a

333 lines
10 KiB
Plaintext
Raw Normal View History

2019-07-27 14:37:48 +00:00
;__________________________________________________________________________________________________
;
; File: ATBoot.a
;
; Contains: a boot protocol driver for AppleTalk
;
; This is the driver that is called by the boot management driver to run a
; boot protocol. This involves finding a server, and later getting some sort
; of boot blocks to return.
;
; We accept:
; control - "getBootBlocks"
; - getSysVol
; - mountSysVol
; open,
; close - our init and ending routines
;
; Written by: Patrick Dyson
;
; Copyright © 1989-1993 by Apple Computer, Inc. All rights reserved.
;
; Change History (most recent first):
;
; <SM3> 6/14/93 kc Roll in Ludwig.
; <LW2> 4/8/93 fau Rolled in the changes from Horror that were causing us from
; NetBooting. Also, in the ATOpen routine, moved the saving of
; registers to the beginning/end of the file and moved the
; fetching of the RefNum from the open to happen before it's
; storage is released!
; <H2> 4/28/92 dns Corrected a couple of outstanding problems relating to opening
; the LAP Manager for net booting.
; <4> 6/17/90 CV Preflight .MPP _Open by checking SPConfig byte - if the port
; isn't configured .MPP will crash cleaning up in it's exit code.
; <3> 6/15/90 CV Handle error on Lap open.
; <2> 5/30/90 CV Changed Close to close the AppleTalk drivers as well.
; <SM2> 11/5/92 SWC Changed INCLUDEs to a LOAD of StandardEqu.d.
; <6> 2/20/90 PWD Recover and detach our handle so that we don't go away
; if we are ram based and the system file is closed
; (switch launch). Only do this if the ForRam flag is set
; <5> 2/1/90 PWD Recover and detach our handle so that we don't go away if we are
; ram based and the system file is closed (switch launch).
; <4> 12/28/89 SWC Fixed header and set tabs to 4.
; <3> 12/19/89 PWD Adding to bbs.
; <1.2> 12/12/89 PWD Added support for self-authenticating images
; <1.1> 11/1/89 PWD Fixed bug on Elsie with old AppleTalk.
; <1.0> 10/29/89 PWD Adding to EASE
;__________________________________________________________________________________________________
;Include files
PRINT OFF
LOAD 'StandardEqu.d'
INCLUDE 'Slots.a' ; Slot equates
INCLUDE 'ROMEqu.a' ; Slot ROM equates
INCLUDE 'AppleTalk.a' ; AppleTalk equates
INCLUDE 'NetBootEqu.a' ; Net Boot equates
PRINT NOGEN,NOMDIR
PRINT ON
INCLUDE 'ATBootEqu.a' ; protocol equates
;
; New equates for the lmgr resource
;
IF &TYPE('lmgrCall') = 'UNDEFINED' THEN
lmgrCall EQU 2 ; Offset into lmgr of function dispatcher
lmgrROMBooting EQU 2 ; Tells lmgr we're doing ROM boot
ENDIF
;_________________________________________________
ATBOOT PROC EXPORT
STRING PASCAL
MACHINE MC68000
; *****************************************
; * *
; * Start of Boot driver *
; * *
; *****************************************
;
; Driver header
;
DC.W $4000+$0400 ; control,locked
DC.W 0,0 ; No time, no events
DC.W 0 ; No menu
;
; Entry points offset table
;
DC.W ATOpen-ATBOOT ; open offset
DC.W ATAnRTS-ATBOOT ; prime (read,write)
DC.W ATControl-ATBOOT ; control
DC.W ATAnRTS-ATBOOT ; status
DC.W ATClose-ATBOOT ; close
DC.W '.ATBOOT' ; Driver name
DC.B 1 ; Sub version number
DC.B 0 ; No main version number
;________________________________________________________________________
;
; Open - initialize the BOOT driver
;
; Called:
; D0 = 0
; A0 -> queue element
; A1 -> DCE
;
;________________________________________________________________________
ATOpen
IMPORT DoOpenLap, mySysEnvirons
; Go get some storage
MOVEM.L D2-D7/A0-A6, -(SP) ; save regs in a paranoid fashion
MOVE.L dCtlStorage(A1), D3 ; are we running yet?
MOVE.L D3, A3 ; pick up globals
BGT.S GotMem ; skip the allocate
IF &ForRam THEN
LEA ATBOOT, A0 ; pick up our pointer
_RecoverHandle ,SYS ; make it a handle
move.l a1, a2 ; save a1
move.l a0, -(SP) ; push handle
_DetachResource
move.l a2, a1 ; pop saved a1
ENDIF
MOVE.L #ATGlobalsSize, D0 ; size of our globals
_NewPtr ,SYS,CLEAR
MOVE.L A0, D3 ; did we get?
BEQ ATErrXit
MOVE.L D3, dCtlStorage(A1) ; save globals pointer
; pick up the .netBoot driver refnum
GotMem SUB #IOQElSize,SP ;Allocate parameter block for device manager calls
MOVE.L SP,A0
CLR.B IOPermssn(A0) ;r/w permissions
LEA BootDiskName, A1
MOVE.L A1,IOFileName(A0)
_Open ; OPEN net boot disk driver
MOVE IORefNum(A0),d4 ; save refnum
TST IOResult(A0) ; any problems?
ADD.L #IOQElSize, SP ; nuke param block
BGT ATErrXit
MOVE d4,netBootRefNum(A3) ; get refnum
; Open up AppleTalk
controlBit EQU 3 ; Bit for control key down
controlByte EQU 7 ; Byte for control keys
BTST #controlBit,KeyMap+controlByte ; Control key skips boot
BNE ATErrXit ; Branch if down
MOVEQ #PortNotCf,d1 ;<4> Assume a port-not-configured error
MOVE.B SPConfig,d0 ;<4> D1 = port configuration byte
AND.B #$0F,d0 ;<4> Clear all but port use bits
SUBQ.B #UseATalk,d0 ;<4> Must be unconfig'ed, or config'd for ATalk
BGT @NoPatchee ;<4> Return error if not
MOVE.W #mapTrue,RomMapInsert ; map ROM into Resource Chain
SUBQ #4,SP ; Make room for handle
MOVE.L #'lmgr',-(SP) ; Push resource type
CLR.W -(SP) ; Push resource ID
_GetResource ; get lmgr from ROM
MOVE.L (SP)+,D5 ; D5 -> lmgr master pointer
BEQ.S @OldAppleTalk ; shouldn't happen, but ...
;
; We got the lmgr from ROM. So call it at its function dispatcher entry point.
; The function code is passed on the stack. We need to tell the lmgr that we're
; booting from ROM. This code only works with AppleTalk 57.0.4 or higher.
;
move.l d5,a0 ; move handle to A0
move.l (a0),a0 ; get ptr to lmgr code
move.l #lmgrROMBooting,-(sp) ; tell lmgr what do to. (function selector)
jsr lmgrCall(a0) ; Call the 'lmgr' to do its thing
addq #4,sp ; remove parameter (C-Calling conventions)
tst.w d0 ; check result
beq.s @lapOK ;<3> no error, continue
move d0, d1 ;<3> exit handler wants error in d1
bra.s @NoPatchee ;<3> branch to exit code
;
; .MPPOpen is a bad boy and calls SysEnvirons. We patch it so it doesn't crash
;
@lapOK MOVE.W #$A090, D0 ; SysEnvirons
_GetTrapAddress ,newOS
MOVE.L A0, A5 ; save address
MOVE.W #$A090, D0 ; SysEnvirons
LEA mySysEnvirons, A0 ; pick up our patch
_SetTrapAddress ,newOS ; patch that pup
@OldAppleTalk
SUB #ioQElSize,SP ; Allocate a queue element
MOVE.L SP,A0 ; A0 -> queue element
CLR.B ioPermssn(A0) ; Any permission
LEA MPPName,A1 ; A1 -> name of MPP
MOVE.L A1,ioFileName(A0) ; Set in queue element
_Open ; Open it
MOVE.W ioResult(A0), D1 ; pick up result of open
ADD #ioQElSize,SP ; Get rid of qEl
TST.L D5 ; Old AppleTalk?
BEQ.S @NoPatchee ; didn't patch iff so
MOVE.L A5, A0 ; pick up old SysEnvirons trap
MOVE.W #$A090, D0 ; and number
_SetTrapAddress ,newOS
@NoPatchee
TST.W D1 ; check open result
BNE.S ATErrXit ; Error if couldn't open
ATXit
MOVEM.L (SP)+, D2-D7/A0-A6 ; restorem
MOVEQ #0,D0 ; Indicate no error
Go RTS ; And return
ATErrXit
MOVEM.L (SP)+, D2-D7/A0-A6 ; restorem
MOVE.W #openErr,D0
RTS
STRING PASCAL
MPPName DC.W '.MPP'
BootDiskName
DC.W '.netBOOT'
OpenStr DC.W 'ATBoot Open'
ALIGN 4
;________________________________________________________________________
;
; Close - close the ATBOOT driver.
;
; We just do housekeeping
; and return.
;
; A1 -> DCE
;________________________________________________________________________
ATClose MOVE.L dCtlStorage(A1), D3 ; do we have storage
BEQ.S ATCloseExit ; skip the deallocate
MOVE.L D3, A3 ; address register
move.l netpram(a3), d0 ; <7>do we have a pram buffer?
beq.s @nopram ; <7>no buffer, no dispose
move.l d0,a0 ; <7>set up for dispos
_DisposPtr ; <7>
@nopram MOVE.L netimageBuffer(A3), D0 ; test
BEQ.S @noBuffer
MOVE.L D0,A0
_DisposPtr
@noBuffer
MOVE.L A3, A0 ; globals pointer
_DisposPtr
CLR.L dCtlStorage(A3) ; don't point at old storage
ATCloseExit
sub #ioQElSize,sp ; <7>Allocate a queue element
move.l sp,a0 ; <7>A0 -> queue element
move #-10,ioRefNum(a0) ; <7>Set in queue element
_Close ; <7>Close .MPP driver
add #ioQElSize,sp ; <7>Get rid of qEl
moveq.l #0, d0 ; <7>no error
ATAnRTS RTS ; And return
CloseStr DC.W 'ATBoot Close'
;________________________________________________________________________
;
; Read - never called
;
; A0 -> queue element
; A1 -> DCE
;________________________________________________________________________
ATRead
RTS
;________________________________________________________________________
;
; Control - control requests to driver
;
; The "guts" of the driver, this is called to get the boot blocks,
; mount a system volume, etc.
;
; Call: A0 -> I/O queue element
; A1 -> device control entry
;________________________________________________________________________
IMPORT PLOTMYICON ; from ATBoot.c
IMPORT DOATCONTROL ; from ATBoot.c
ATControl
; PEA ControlStr
; _DebugStr
MOVE.L A1, -(SP) ; save DCE pointer for jIoDone
MOVE.L A0,-(SP) ; save that param block pointer
MOVEQ #-1, D0 ; assume error return
;
; Go do the real work
;
MOVE.L dCtlStorage(A1), -(SP) ; push globals pointer
BEQ NoGo ; paranoia check
MOVE.L A0, -(SP) ; push param block
JSR DOATCONTROL ; get boot blocks, image, etc.
NoGo ADDQ.L #8, SP ; clean up stack
ErrExit
Exit MOVE.L (SP)+,A0 ; restore iopb
MOVE.L #1024,IOActCount(A0) ; fake good read
MOVE.W D0, ioResult(A0) ; return code in D0.W
MOVE.L (SP)+, A1 ; MUST BE VALID FOR JIODONE!!!
MOVE.L JIODone,A3 ; This is how we exit (Prime, Control, Status)
JMP (A3)
ControlStr DC.W 'ATBoot Control'
ENDP
mySysEnvirons PROC EXPORT
MOVE.W #$0605, SysEnvRec.systemVersion(A0) ; fake good sys version
MOVEQ.L #0, D0 ; and return no error
RTS
ENDP
END