;
;	Hacks to match MacOS (most recent first):
;
;	<Sys7.1>	  8/3/92	Reverted <SM9> boxFlag checks and tacked-on flags from <SM14>/<SM16>
;							Commented out the nonSerializedIO nops from <SM7> and <SM12>, and
;							restored a short branch that the nops blew out. Restored useless
;							MaxBusErr code to Transfer_96 (from SCSIMgrHW96BIOS.a)
;				  9/2/94	SuperMario ROM source dump (header preserved below)
;

;
;	File:		SCSIMgrHW96.a
;
;	Contains:	SCSI Manager 53C96 Hardware-Specific routines
;
;	Written by:	Far Too Many People
;
;	Copyright:	© 1990-1993 by Apple Computer, Inc.  All rights reserved.
;
;	Change History (most recent first):
;
;	  <SM16>	 8/12/93	KW		conditionalizing smurf branches
;	  <SM15>	 8/11/93	KW		added some branches based on new smurf boxes
;	  <SM14>	  5/5/93	PW		Enabling FastRead and FastWrite for EVT2 PDMs.
;	  <SM13>	  2/5/93	CSS		Horror rollin. Export some entry points for the BIOS ROM SCSI
;		<H5>	  9/6/92	jab		Exported some entry points for the BIOS ROM SCSI Mgr to use.
;									mgr.
;	  <SM12>	 1/26/93	SAM		Added various NOPs after the xferCount reg gets loaded before a
;									xferInfo cmd is sent for NonSerializedIO machines.  Added not
;									forROM conditionals around all 24-bit/swapmmu code in here just
;									for grins.  Crippled all fast read/write routins for PDM only to
;									not be fast (ie to use the slow FIFO xfer routines till Jimmy
;									fixes his shit.)
;	  <SM11>	12/23/92	RC		Added Support for Smurf on Wombat
;	  <SM10>	12/11/92	SAM		Removed PDM bring-up hacks.
;	   <SM9>	 12/3/92	fau		Changed the use of DAFBExists to check for the
;									Spike/Eclipse/Zydeco/RiscQuadra box flag.  Those registers on
;									DAFB are only needed on those machines.
;	   <SM8>	 11/3/92	SWC		Changed SCSIEqu.a->SCSI.a.
;	   <SM7>	10/18/92	CCH		Added nop's to support non-serial IO space, conditionals to use
;									byte accesses to the DREQ register, and a hack to bypass
;									pseudo-DMA on PDM for now.
;	   <SM6>	  8/9/92	CCH		Modified boxflag check for Spike to include boxRiscQuadra.
;		 <5>	 5/22/92	DTY		#1029009 <jab>: Modified DREQ bit testing from global (setup in
;									SCSIInit96) and rearranged writebacks to conform with Moto spec.
;		 <4>	  5/1/92	JSM		Don’t use isUniversal conditional, which was commented out
;									anyway. Don’t use internal GEEZ conditional, which was always
;									false. Use Max020030BusErrs instead of MaxBusErr, which is
;									equated differently in SCSIPriv.a depending on how CPU was
;									defined. For System builds, CPU is set to 00, which gave us the
;									wrong value since this file is only used on 020's and above.
;		 <3>	 3/17/92	pvh		#1021847:
;									Fix the removable device bug (CD ROMs etc.) on Quadras which
;									caused the “This disk is unreadable.  Do you want to format?”
;									dialog to randomly appear.  Apparently there is a bug in the
;									53C96 chip which causes the FIFO count to get stuck on occasion.
;									We now flush the FIFO buffer to make sure the count is correct.
;		 <2>	 12/2/91	SAM		Using official boxflag equates now.
;		 <1>	10/24/91	SAM		Rolled in Regatta file.
;		
;				Regatta Change History:
;
;				 <4>	  9/4/91	SAM		(PDW) Fixed polled write PhaseErr bug by using status register
;											for phase test instead of bogus D5 register.
;				 <3>	 8/21/91	SAM		(PDW) Removed bunch of debugging stuff. Removed "fix" for VM_On
;											BEH problem since "real" fix is now in dataCommon_96
;											(SCSIMgr96.a).
;				 <2>	 8/19/91	SAM		(PDW) Reverted to old in/out buserr handler support.  Fixed
;											incorrect loop counting in BusErrHandler (wasn't taking zero 
;											case into account). Increased quanta of DREQ timeout value 
;											in BEH (twice as long). Changed Transfer so that we don't modify
;											yeOldeBusErrVct if vector at 8 is already our SCSI bus error
;											handler. This fixes "symptom" of VM_On/BEHandler Vector bug.
;				 <1>	  8/8/91	SAM		(PDW) Checked into Regatta for the first time with lots of 
;											changes over the TERROR sources.
;				 <0>	  8/8/91	SAM		Split off from TERROR sources.
;
;				Terror Change History:
;
;				<T10>	  7/8/91	djw		(pdw) Fixed bug in FastRead_96 and FastComp_96 where any odd
;											count over 256 bytes would fail (cmp.b should be a cmp.l).
;				 <T9>	 6/27/91	BG		(actually PDW/CCH/BG) changed the dynamic register setup stuff
;											in InitSCSI96HW so that the ProductInfo record is where the
;											information for the BoxFlag check comes from.
;				 <T8>	 6/27/91	djw		(actually PDW) Changes for better handling of select sequence
;											across phases and across traps. Added NOPs at top and bottom of
;											non-serialized accesses to squish pipeline (to avoid problems at
;											higher CPU speeds. Fixed SlowRead hang (when phase changes
;											before transfer is complete (scInc or scNoInc). Fixed FastRead
;											residual byte problem (where we didn't detect the missing REQ)
;											by checking the FIFO count before doing the rFFO. Also removed
;											all traces of SCSIBusy and FreeHook stuff. Made BusErrHandler
;											able to deal with no valid registers. (JMA) Added BusErrHandler
;											routine.
;				 <T7>	 6/14/91	djw		(actually PDW) Created working Transfer_96 routine that sends
;											ptr to non-serialized chip image to data routines. Also modified
;											all data routines to use this for all rDMA register accesses.
;											Put FCIntPend clear in WaitForSCSIIntrp (w & w/o timeout) so
;											that every time the interrupt bit in the chip was cleared, this
;											select_in_progress flag is cleared also.
;				 <T6>	  6/9/91	BG		(BG) InitHW_SCSI96: Reworked the routine to handle dynamic
;											initialization of DAFB/Turbo SCSI register based on CPU clock
;											speed.  Modified check for SCSI clk speed initialization for
;											Eclipse and Spike to (1) be based on D2 instead of BoxFlag,
;											since BoxFlag has not been initialized yet when this routine is
;											called, and (2) added dynamic initialization of 16/25MHz SCSI
;											clk speed based on CPU clk speed.    (PDW) Changed throwaway reg
;											at end. Rearranged headers to work more consistently between
;											test INIT and ROM builds.
;				 <T5>	 3/30/91	BG		(actually JMA) Rolled in faster SlowRead_96 and SlowComp_96
;											routines.
;				 <T4>	 2/17/91	BG		(actually JMA) Added SlowComp_96, FastComp_96 & Error calls.
;				 <T3>	 1/11/91	BG		Added fix to correctly reset SCSI 96 bus.
;				 <T2>	  1/5/91	BG		(actually JMA) Added functionalites.
;				 <T1>	 12/7/90	JMA		Checked into TERROR for the first time
;
;==========================================================================						<T4>


			MACHINE		MC68020
			BLANKS		ON
			STRING		ASIS
			PRINT		OFF

			LOAD		'StandardEqu.d'			; Load em if you got em...
			INCLUDE		'HardwarePrivateEqu.a'
			INCLUDE		'UniversalEqu.a'
			INCLUDE		'SCSI.a'
			INCLUDE 	'SCSIPriv.a'
			INCLUDE		'SCSIEqu96.a'
			INCLUDE		'MC680x0.a'

			PRINT		ON

SCSIHW96	PROC		EXPORT	

			EXPORT		SlowRead_96,	Transfer_96,		Xfer1Byte
			EXPORT		Wt4DREQorInt,	HandleSelInProg,	WaitForIntNoTime
			EXPORT		ResetBus_96,	WaitForSCSIIntrp
			EXPORT		BusErrHandler_96								;					<T8>


			EXPORT		InitHW_SCSI96,	IntHnd_SCSI96		
			EXPORT		SlowWrite_96,	SlowComp_96						;					<T4>
			EXPORT		FastRead_96,	FastWrite_96,	FastComp_96		;					<T4>
			EXPORT		OneByteWrite, 	OneByteRead, 	WtForFIFOData	;					<H5> <SM13> CSS

			
			IMPORT		ClearSCSIInt									; from InterruptHandlers.a	<T4>
			IMPORT		SCSIpcTo32bit, Error, SwapMMU					; from SCSIMgr96.a			<T4>


			WITH		scsiPB, scsiPrivPB
			WITH		scsiGlobalRecord, dcInstr


;--------------------------------------------------------------------------
;
; InitHW_SCSI96 - reset and initialize the 53C96 SCSI controller									
;		This routine resets all functions in the chip and returns
;		it to a disconnected state.
;
;  INPUTS
;		a3 -> pointer to SCSI port base address													<T6>
;		a4 -> pointer to SCSI DAFB register														<T6>
;			  (NOTE - this routine assumes that we are in 32-bit mode!)							<T6>
;		d2 -> 16/HWCfgFlags, 8/BoxFlag, 8/MemDecoder											<T6>
;			  (the lowMem BoxFlag is not yet defined!)											<T6>
;
;	OUTPUTS
;		d0 <- rINT(a3)																			<T6>
;
; trashes: d0, d1, a0																			<T6>

InitHW_SCSI96

			move.b	#cRstSChp, rCMD(a3)			; Reset the Chip (not the bus)
		if nonSerializedIO Then
;			nop									; Force write to complete.				<SM12><Sys7.1>
		endif
			move.b	#cNOP, rCMD(a3)				; C96 NOP required after HW or SW reset
			move.b	#cFlshFFO, rCMD(a3)			; Flush FIFO
			
		if nonSerializedIO Then
;			nop									; Force write to complete.				<SM12><Sys7.1>
		endif
			move.b	#initCF1, rCF1(a3)			; load init config. value which affects:
												;	busID, SCSI reset reporting & parity checking
												
			move.b	#initCF2, rCF2(a3)			; load init config. value
			
			move.b	#initCF3, rCF3(a3)			; load init config. value
		if nonSerializedIO Then
;			nop									; Force write to complete.				<SM7><Sys7.1>
		endif
			
;	Check whether or not we're 25 or 33MHz and set SCSI bus speed values appropriately			<T6> thru next <T6>

			TestFor	VIA2Exists					; see if we should check 25/33MHz VIA2 bit
			beq.s	@dontChk					; if there's not a VIA2, don't do it.				ex<SM9> <Sys7.1>
			TestFor	DAFBExists					;		vs BoxFlags for Spike/Eclipse/Zydeco		ex<SM9> <Sys7.1>
			beq.s	@dontChk					;		if there's not a DAFB						ex<SM9> <Sys7.1>

			move.l	a0,-(sp)					;		needlessly save a0...						ex<SM9> <Sys7.1>
			move.l	VIA2,a0						; and get VIA2 so that we can check the speed bit
			move.b	vBufB(a0),d0				; read PBx values for 25/33MHz checks
			move.l	(sp)+,a0					;		...and restore a0							ex<SM9> <Sys7.1>
			btst	#v2Speed,d0					; are we 25 MHz or 33 Mhz?
			beq.s	@25MHz						; IF Speed == 33MHz THEN
			move.l	#tsc_cf_stg_33,(a4)			;     setup DAFB SCSI config register.
												;     ... must move 32 bits to DAFB
			bra.s	@0							; ELSE	// Speed == 25MHz
@25MHz
			move.l	#tsc_cf_stg_25,(a4)			;     setup DAFB SCSI config register.
												;     ... must move 32 bits to DAFB
@0												; ENDIF

;******* TEMPORARY KLUDGE TO SUPPORT a 16/25Mhz Eclipse SCSI96 and  ***** 
;*******	25Mhz Spike SCSI96                                      *****
;
;	ASSUMPTION:	 If you are executing this code, you are either a Spike or Eclipse.					<T6>
;
;	ASSUMPTION:  If you are a Spike, then you ALWAYS are a 25 MHz SCSI clock.						<T6>
;				 If you are an Eclipse:																<T6>
;						If you have a 25 MHz CPUClk, you have a 15.6672 MHz SCSI clk				<T6>
;						If you have a 33 MHz CPUClk, you have a 24.28416 MHz SCSI clk				<T6>

			move.l	UnivInfoPtr,A0				; get pointer to universal table					<T9>
			cmp.b	#boxQuadra700,ProductInfo.ProductKind(A0)	; check for a Spike					<T9><2>
			beq.s	@ForSpike					; (note - BoxFlag is not defined yet!)				<T9>

;	Check for difference between 25 and 33MHz Eclipse machines:										<T6>

			btst	#v2Speed,d0					; are we running at 25 or 33 MHZ?					<T6>
			bne.s	@33MHz						; IF Speed == 25MHz THEN							<T6>
			move.b	#ccf15to20MHz, rCKF(a3)		;     load clock conversion factor (CCF) value
			move.b	#SelTO16Mhz, rSTO(a3)		;     load select/reselect timeout value
			bra.s	@1							;													<T6>
@33MHz											; ELSE // Speed == 33MHz							<T6>
* fall thru to @ForSpike *
;			move.b	#ccf20to25MHz, rCKF(a3)		;     load clock conversion factor (CCF) value		<T6>
;			move.b	#SelTO25Mhz, rSTO(a3)		;     load select/reselect timeout value			<T6>
;			bra.s	@1							; ENDIF // Speed

@ForSpike
* fall thru to @dontChk.  *clkCnvVal* ==  *ccf20to25MHz*;  *SelTO25Mhz* == *slcTimeout*				<T6>
;			move.b	#ccf20to25MHz, rCKF(a3)		; load clock conversion factor (CCF) value
;			move.b	#SelTO25Mhz, rSTO(a3)		; load select/reselect timeout value
;			bra.s	@1

;********** TEMPORARY - DELETE WHEN SCSI CLOCK IS FINALIZED
;********** /// END of KLUDGE ///

;**** The 2 lines below are the correct code and UN-comment them.
; Delete the kludge section above when scsi clock is finalized
@dontChk
			move.b	#ccf20to25MHz, rCKF(a3)		; load clock conversion factor (CCF) value
			move.b	#SelTO25Mhz, rSTO(a3)		; load select/reselect timeout value
@1

		IF forPDMDebug THEN						; SAM (someone shouyld fix that shit above!)		<SM12>
			move.b	#ccf15to20MHz, rCKF(a3)		; load clock conversion factor (CCF) value
			move.b	#SelTO16Mhz, rSTO(a3)		; load select/reselect timeout value
			nop
		ENDIF

			move.b	#initOp, rSYO(a3)			; select syn or async operation; if sync then
												;   sync offset value must be nonzero
												; Set synch xfer period and offset if using
												;	synch data xfer
@4
		if nonSerializedIO Then
;			nop									; Force write to complete.				<SM7><Sys7.1>
		endif
			move.b	rINT(a3), d0				; read & clear rFOS, rSTA & rINT into throwaway		<T6>
			rts



			
;--------------------------------------------------------------------------
;
;	IntHnd_SCSI96 - This is the SCSI96 interrupt handler
;	Called by:	Macintosh Interrupt Dispatcher
;
;   Regrs saved: a0-a5/d0-d7
;

IntHnd_SCSI96
			movem.l	intrRegs, -(sp)				; save registers
			movea.l	SCSIGlobals, a4				; get ptr to structure
			clr.l	d5							; 
			addq.l	#1, G_IntrpCount(a4)		; count intrps - FOR Debug
			move.l	base539x0(a4), a3			; load ptr for SBus0							<T2>
			btst.b	#bINT, rSTA(a3)		 		; test intrp bit of status regr
			bne.s	@gotSCSIInt					; bra. if we got SCSI intrp
@chkNext			
			move.l	base539x1(a4), a3			; load ptr for SBus1							<T2>
			btst.b	#bINT, rSTA(a3)		 		; test intrp bit of status regr
			beq.s	@ExitSCSIIntrp
@gotSCSIInt										;
;			addq.l	#1, G_base5396(a4)			; incr. valid SCSI intrp counter, for debug		<T2>
			move.b	rSTA(a3), d5				; read Status regr
			swap	d5							;
			move.b	rFOS(a3), d5				; read FIFO flag/Sequence Step regr
			lsl.w	#8, d5						; shift left by 1 byte
			move.b	rINT(a3), d5				; read & clear rFOS, rSTA & rINT
			swap	d5							; d5 = rFOS|rINT|0|rSTA
			move.l	d5, G_IntrpStat(a4)			; save regr values, for debug					<T2>
@ExitSCSIIntrp
			movem.l	(sp)+, intrRegs				; restore registers
			rts									;



			
;--------------------------------------------------------------------------
;	Transfer_96 - 																			<T7> thru next <T7>
; 
;	Called by:	dataCommon_96 
;				(NewSCSIWBlind_96, NewSCSIWrite_96, NewSCSIRBlind_96, NewSCSIRead_96)
; 
;	Calls:		The primitive data transfer routines 
; 
;	Registers:	d0	<-- error, if any 
;				d1	<-- bytes transferred 
;				d2	--> number of bytes to transfer 
;				d4	--> type of transfer to perform (offset into "dataTable") 
; 
;				a2	--> ptr to data buffer 
;				a3	--> SCSI chip read base address - SERIALIZED
;				a4	--> ptr to SCSI Mgr globals 
; 
;	Function:	Sets up and dispatches to the simple data-transfer routines 
; 
;	All primitive data transfer routines called by this routine assume: 
; 
;		d0 - <-- error (if any) 
;		d1 - <-- bytes transferred 
;		d2 - --> number of bytes to transfer 
;		d3 -     scratch - saved 
;		d4 - --> type of transfer to perform 
;		d5 -     scratch - saved 
;		d6 -     scratch - saved 
; 
;		a0 - scratch - saved 
;		a1 - SCSI chip read base address - NON-SERIALIZED
;		a2 - ptr to data buffer - saved 
;		a3 - SCSI chip read base address - SERIALIZED
;		a4 - ptr to SCSI Mgr globals 
;		a5 - scratch - saved 
; 
	;
	; Stack frame definitions (frame allocated in StdEntry)
	;
	
XferFrame		RECORD	{LINK},DECR
returnAddr	ds.l	1	; return address
	; no parameters
LINK		ds.l	1	; location of old A6 (after LINK A6)
	; local variables  (set up and checked in BusErrHandler)
BusErrTO	ds.l	1	; when to stop retrying bus errs
BusErrAddr	ds.l	1	; user's data address when bus err happens

linkSize		EQU	*
				ENDR
		
		WITH	XferFrame
		
Transfer_96:
			link	a6, #linkSize				; allocate local storage

			moveq	#Max020030BusErrs,d0		; upper limit for 020s and 030s					<Sys7.1>
			cmp.b	#cpu68040,CpuFlag			; check if we're on an 040						<Sys7.1>
			bne.s	@storeValue					; NO  ... leave BusErrCount alone				<Sys7.1>
			moveq	#Max040BusErrs,d0			; YES ... use 040 MaxBusErr value				<Sys7.1>
@storeValue										;												<Sys7.1>
			move.l	#0, BusErrAddr(a6)			; init so first bus err is seen as a new one

			moveq.l	#noErr, d0					; assume no error
			move.l	d2, d1						; make a copy of the count - is it zero ?
			beq.w	@exit						; if so, get out

			movem.l a1-a5/d2-d6, -(sp)			; save registers

			movea.l	a3,a1						; point to serialized chip image
		IF NOT forPDMDebug THEN
			adda.l	#nonSerlzdDisp,a1			; point to non-serialized chip image
		ENDIF

			bsr		HandleSelInProg				; handle unfinished select command
			bne.w	@phaseErr					; if it is stuck, we are not in data phase

			move.b	#cFlshFFO, rCMD(a3)			; Flush FIFO									<T8>
		if nonSerializedIO Then
;			nop									; Force write to complete.				<SM7><Sys7.1>
		endif

;			move.l	BusErrVct, D0				; compare old vector (at 8)						<2> <3>removed
;			cmp.l	jvBusErr(a4), D0			; with my vector								<2> <3>
;			beq.s	@1							; if same, skip the install process				<2> <3>

			move.l	BusErrVct,yeOldeBusErrVct(a4)	; keep old vector in low-mem				<T8>
			move.l	jvBusErr(a4), BusErrVct			; install our BE Handler
@1
			bset.b	#HandleBusErrs, G_State96(a4)	; signal our bus err handler to be operative
			move.w	d4, transferType(a4)			; store the type of transfer (only word is worth anything)

			lea.l	dataTable(a4), a0			; point to data transfer table in globals
			movea.l	0(a0,d4.l), a0				; get the routine address
			
			jsr		(a0)						; go to the appropriate routine

@done
			bclr.b	#HandleBusErrs, G_State96(a4)	; signal our bus err handler to be unoperative
			move.l	yeOldeBusErrVct(a4),BusErrVct	; restore previous Bus Error vector			<T8><2>

			movem.l (sp)+, a1-a5/d2-d6			; restore these guys
			tst.w 	d0							; set the condition codes
@exit
			unlk	a6							; release local storage
			rts									;												<T7> from last <T7>

@phaseErr
			moveq.l	#scPhaseErr, d0				; return a phase error
			moveq.l	#0, d1						; number of bytes transferred
			bra.s	@done						; 

		ENDWITH
		


			
;--------------------------------------------------------------------------
; OneByteRead/OneByteWrite - proc to transfer 1 byte													<T2>
;
;		d0 - <-- error (if any)
;		d1 - --> copy of d2
;		d1 - <-- bytes transferred
;		d2 - --> number of bytes to transfer
;		d3 -     scratch - saved
;		d4 - --> type of transfer to perform
;		d5 -     scratch - saved
;		d6 -     scratch - saved
;
;		a0 - scratch - saved
;		a1 - SCSI chip read base address - NON-SERIALIZED
;		a2 - ptr to data buffer - saved
;		a3 - SCSI chip read base address - SERIALIZED
;		a4 - ptr to SCSI Mgr globals
;		a5 - scratch - saved

OneByteRead										;														<T2> thru next <T2>
			move.b	#cIOXfer, rCMD(a3)			; load IO transfer cmd & begin xfers
		if nonSerializedIO Then
;			nop									; Force write to complete.				<SM7><Sys7.1>
		endif
			jsr.w	WaitForIntNoTime			; Wait for intrp w/o timeout
												;    on exit d5 = rFOS|rINT|0|rSTA
			bne.s	xferErr						; bra. on xfer error
			move.b	rFFO(a3), (a2)+				; xfer byte from FIFO into input buffer					<T4> thru next <T4>
			
			move.b	rINT(a3), d3				; read Intrp regr & clear rSTA, rSQS & rINT
			btst.l	#bDSC, d3					; check for disconnected intrp 
			bne.s	xferErr						; bra. on xfer error
			moveq.l	#noErr, d0					; successful read op									<T4>
			rts			

OneByteWrite
			move.b	(a2)+, rFFO(a3)				; preload the FIFO
		if nonSerializedIO Then
;			nop									; Force write to complete.				<SM7><Sys7.1>
		endif
			move.b	#cIOXfer, rCMD(a3)			; load IO transfer cmd & begin xfers
		if nonSerializedIO Then
;			nop									; Force write to complete.				<SM12><Sys7.1>
		endif
			jsr.w	WaitForIntNoTime			; Wait for intrp w/o timeout
												;    on exit d5 = rFOS|rINT|0|rSTA
			bne.s	xferErr						; bra. on xfer error
			moveq.l	#noErr, d0					; successful write op
			rts			

xferErr
			move.l	#$F0, d6					; load proc ID, generic transfer					<T4> thru next <T4>
			moveq.l #scCommErr, d0				; transfer error
			bra.s	errExit




phaseErr1
			move.l	#$F0, d6					; load proc ID, generic trnasfer
			moveq.l	#scPhaseErr, d0				; return a phase error
errExit			
			jsr		Error						; call Error proc - for debug
			clr.l	d1							; no bytes transferred
			move.b	#cFlshFFO, rCMD(a3)			; Flush FIFO
		if nonSerializedIO Then
;			nop									; Force write to complete.				<SM7><Sys7.1>
		endif
			rts									;													<T4>


			
;--------------------------------------------------------------------------
; Xfer1Byte - proc to transfer 1 byte of data
;		
; Branched to by SlowRead/SlowWrite(Polled) & FastRead/SlowWrite(Blind).  It returns directly
;       Transfer proc which call either SlowRead or FastRead.
;
;		d0 - <-- error (if any)
;		d1 - --> copy of d2
;		d1 - <-- bytes transferred
;		d2 - --> number of bytes to transfer
;		d3 -     scratch - saved
;		d4 - --> type of transfer to perform
;		d5 -     scratch - saved
;		d6 -     scratch - saved
;
;		a0 - scratch - saved
;		a1 - SCSI chip read base address - NON-SERIALIZED
;		a2 - ptr to data buffer - saved
;		a3 - SCSI chip read base address - SERIALIZED
;		a4 - ptr to SCSI Mgr globals
;		a5 - scratch - saved

Xfer1Byte
			move.b	#cIOXfer, rCMD(a3)			; load IO transfer cmd & begin xfers
		if nonSerializedIO Then
;			nop									; Force write to complete.				<SM7><Sys7.1>
		endif
			jsr.w	WaitForIntNoTime			; Wait for intrp w/o timeout
												;    on exit d5 = rFOS|rINT|0|rSTA
			rts									; IF z=1 then good xfer...



			
;--------------------------------------------------------------------------
; SlowRead - implements Polled Read																	<T2>
;
;	Called by:	Transfer
;
; All primitive data transfer routines assume:
;
;		d0 - <-- error (if any)
;		d1 - --> copy of d2
;		d1 - <-- bytes transferred
;		d2 - --> number of bytes to transfer
;		d3 -     scratch - saved
;		d4 - --> type of transfer to perform
;		d5 -     scratch - saved
;		d6 -     scratch - saved
;
;		a0 - scratch - saved
;		a1 - SCSI chip read base address - NON-SERIALIZED
;		a2 - ptr to data buffer - saved
;		a3 - SCSI chip read base address - SERIALIZED
;		a4 - ptr to SCSI Mgr globals
;		a5 - scratch - saved
;
; Method of Data Transfer: (pDMA and programmed IO)										<T5> to next <T5>
;  0) Make sure we got our intrp from the last cmd send
;  1) calculate # of 16-byte block transfers to perform using pDMA & remember the remainder
;  2) Enable c96 DMA and wait till the 16-byte FIFO is full and DREQ is asserted for the 17th byte
;  3) Transfer all data in the FIFO and wait for the intrp
;  4) Repeat until all block have been transferred
;  5) Transfer remaining data using non-DMA transfer command byte then 
;		Wait and poll for byte-in-fifo interrupt
;  6) Transfer data from fifo to input buffer
;  7) Repeat process until all remaining bytes have been transferred
;

SlowRead_96
			bsr		HandleSelInProg				; handle unfinished select command
			bne.w	@phaseErr					; if it is stuck, we are not in data phase
@doRead
			moveq.l	#iPhaseMsk, d0				; load mask for phase bits
			and.b	rSTA(a3), d0				; are we in data-in phase?
			cmpi	#iDataIn, d0				; data-in phase bits = 001
			bne.s	phaseErr1					; bra. on phase err
			
			clr.l	d6							;
			move.l	d2, d4						; d4 = copy of transfer count
			lsr.l	#4, d4						; divide xfer count by 16
			beq.w	@16orLess					; bra. if < 16 bytes
			subq.l	#1, d4						; adjust for DBRA
			move.l	d4, d6						; d4.w has lower 16-byte block count
			swap	d6							; d6.w has upper 16-byte word count
@16orMore
			; The next few lines are necessary in order to poll DREQ in nuBus
			; address space.  We don't need to do this if we're xferring <16 bytes.
			
			jsr		SCSIpcTo32bit				; use pc relative
		    move.b	MMU32Bit, -(sp)				; save current mode on stack
			moveq	#true32B, d0				; switch to 32-bit mode to look at SCSI config regr 					
			jsr		SwapMMU						; do it, call _SwapMMUMode jump vector
			move.l	a2, d0						; get destination addr in d0						
			_StripAddress						; clear upper byte if necessary
			move.l	d0, a2						; a2 = clean buffer ptr
			move.l	G_SCSIDREQ(a4), a0			; load SCSI DREQ regr
			
			move.b	#cFlshFFO, rCMD(a3)			; Flush FIFO										<T8>
			move.b	#0, rXCM(a3)				; rXCM = 0, clear most-sig. byte count
			move.b	#$10, rXCL(a3)				; rXCL = 16 bytes, least-sig. byte value
		if nonSerializedIO Then
;			nop									; Force write to complete.				<SM7><Sys7.1>
		endif
			and.l	#$F, d2						; d2 = remainder word count after 16-byte moves
@read16			
			moveq.l	#iPhaseMsk, d5				; load mask bits for phase value
			and.b	rSTA(a3), d5				; are we still in data-in phase?
			cmpi.b	#iDataIn, d5				; data-in phase bits = 001
			bne.w	@premature2					; no: probably in status phase - split										

			move.b	#cDMAXfer, rCMD(a3)			; load DMA transfer cmd & start loading FIFO
			nop									;   currently loaded transfer count is used/reused
@1
			btst.b	#bTRC, rSTA(a3)				; check if we've rcvd all the data						<T8> thru next <T8>
			bne.s	@4							; if we have, go get the bytes
			btst.b	#bINT, rSTA(a3)				; poll for unexpected intrp while waiting
			bne.w	@prematureEnd				; ... maybe disconnected or something catastrophic.
												; premature phase change won't generate intrp bit 'cuz of outstanding DREQ...
												; ... we have to check this condition explicitly
			moveq.l	#iPhaseMsk, d5				; load mask bits for phase value
			and.b	rSTA(a3), d5				; are we still in data-in phase?
			cmpi.b	#iDataIn, d5				; data-in phase bits = 001
			beq.s	@1							; yes, bra. & keep polling										
			tst.b	rXCL(a3)					; not data-in anymore, have we xferred all data (XCL = 0)?
			beq.s	@1							; if yes then there MUST be a transfer count zero bit set
			bra.w	@prematureEnd				; transfer count not 0 so we have a premature end		<T8> from prev <T8>
		
			; We need 16 guaranteed DREQs to safely transfer 16 bytes without bus error.
			; Ideally, DREQ should be active as long there are threshold number of bytes in the
			; FIFO--as the c96 user's guide imply.  But the c96 implementation also requires that
			; REQ be active in order to get DREQ.  This is why we must wait for the 17th REQ from
			; the target--and it must remain active--before we proceed with the 16-byte transfer.
@4
		IF forPDMDebug THEN						;								<SM7>
			move.b	(a0), d5					; read DAFB regr (a0=DAFB register addr)
		ELSE
			move.l	(a0), d5					; read DAFB regr (a0=DAFB register addr)
		ENDIF
			move.b	G_bitDREQ(a4),d0			; load DREQ bit position		<5> jab
			btst.l	d0, d5						; DREQ ?						<5> jab
			beq.s	@1							; loop until asserted
			btst	#4, rFOS(a3)				; see if FIFO is full
			beq.s	@1							; loop until asserted
@10

			nop									; squoosh pipeline								<T8>
			move.w	rDMA(a1), (a2)+				; read 16 bytes									<T7> thru next <T7>
			move.w	rDMA(a1), (a2)+
			move.w	rDMA(a1), (a2)+
			move.w	rDMA(a1), (a2)+
			move.w	rDMA(a1), (a2)+
			move.w	rDMA(a1), (a2)+
			move.w	rDMA(a1), (a2)+
			move.w	rDMA(a1), (a2)+				;												<T7> from last <T7>
		IF nonSerializedIO THEN
			nop									; squoosh pipeline								<T8>
		ENDIF
			
			; Note that intrp is asserted only after transfer count is 0, FIFO is empty
			; and the target asserts REQ for the next byte.
@2
			btst.b	#bINT, rSTA(a3)				;  check for c96 INTRP
			beq.s	@2							;  loop until we get the intrp
			
			move.b	rINT(a3), d5				; read Intrp regr & clear rSTA, rSQS & rINT
			btst.l	#bDSC, d5					; check for disconnected intrp 
			bne.s	@premature2					; Branch if transfer error

			dbra	d4, @read16					; loop until done, d4 is lower word count
			dbra	d6, @read16					; loop until done, d6 is upper word count
			move.b	(sp)+, d0					; switch to previous address mode
			jsr		SwapMMU						; do it, call _SwapMMUMode jump vector
			bra.s	@16OrLess					; take care of remaining data, if any
@rdSingle										; use non-pDMA for remainder
			moveq.l	#iPhaseMsk, d5				; load mask bits for phase value
			and.b	rSTA(a3), d5				; are we still in data-in phase?
			cmpi.b	#iDataIn, d5				; data-in phase bits = 001
			bne.s	@phaseErr					; bra. on phase err
			move.b	#cIOXfer, rCMD(a3)			; load IO transfer cmd & begin xfers
		if nonSerializedIO Then
;			nop									; Force write to complete.				<SM7><Sys7.1>
		endif
@3
			btst.b	#bINT, rSTA(a3)				; check for c96 INTRP
			beq.s	@3							; loop until we get an intrp
			move.b	rFFO(a3), (a2)+				; xfer byte from FIFO into input buffer
			
			move.b	rINT(a3), d5				; read Intrp regr & clear rSTA, rSQS & rINT
			btst.l	#bDSC, d5					; check for disconnected intrp 
			bne.s	@xferErr					; Branch if transfer error
@16OrLess
			dbra	d2, @rdSingle				; read the rest of the remainders
@goodSRead										; d1 = # of bytes transferred
			moveq.l	#noErr, d0					; successful read op
			rts									; 


; Premature phase change - get leftover bytes out of FIFO, clear DREQ and INTRPT		<T8> to next <T8>

@prematureEnd
			moveq.l	#iFOFMsk, d0				; use mask to get FIFO flag field
			and.b	rFOS(a3), d0				; how many bytes left in FIFO?
			bra.s	@btmLeftovers
@topLeftovers
			move.b	rFFO(a3), (a2)+
@btmLeftovers
			dbra	d0,@topLeftovers
@removeDREQ
		IF forPDMDebug THEN						;								<SM7>
			move.b	(a0), d5					; read DAFB regr (a0=DAFB register addr)
		ELSE
			move.l	(a0), d5					; read DAFB regr (a0=DAFB register addr)
		ENDIF
			move.b	G_bitDREQ(a4),d0			; load DREQ bit position		<5> jab
			btst.l	d0, d5						; DREQ ?						<5> jab
			beq.s	@5							; if no DREQ, skip dummy rDMA access
			move.w	rDMA(a3), d5				; remove that outstanding DREQ (magic),
			bra		@removeDREQ					; and see if there's more (more magic)
@5												; and give us that intrp
			bsr.w	WaitForIntNoTime			; Clear pending intrp & get err status
												;    on exit d5 = rFOS|rINT|0|rSTA

; Premature phase change with no leftover bytes

@premature2
			move.b	(sp)+, d0					; switch to previous address mode
			jsr		SwapMMU						; do it, call _SwapMMUMode jump vector
												;									<T8> from prev <T8>
; calc how many bytes we've xferred...
			addq.w	#1, d4						; undo adjustment for dbra
			swap	d6							; calculate bytes left to transfer
			move.w	d4, d6						; form long word count
			lsl.l	#4, d6						; mult by 16

			and.b	#iPhaseMsk, d5				; are we still in data-in phase?
			cmpi.b	#iDataIn, d5				; data-in phase bits = 001
			beq.s	@xferErr					; bra. to check for disconnect
@phaseErr
			moveq.l	#scPhaseErr, d0				; return a phase error
			bra.s	@badSRead					;

@xferErr										; anything else is a comm. err
			moveq.l #scCommErr, d0				; transfer error
@badSRead
			add.l	d2, d6						; add un-xferred remainder
			sub.l	d6, d1						; number of bytes transferred
			
			move.l	#scsiRead, d6				; load proc ID
			jsr		Error						; call Error proc - for debug
			move.b	#cFlshFFO, rCMD(a3)			; Flush FIFO
		if nonSerializedIO Then
;			nop									; Force write to complete.			<SM7><Sys7.1>
		endif
			rts									; 									<T5>
			


			
;--------------------------------------------------------------------------
; SlowWrite - implements Polled Write
;
;	Called by:	Transfer
;
; All primitive data transfer routines assume:
;
;		d0 - <-- error (if any)
;		d1 - --> copy of d2
;		d1 - <-- bytes transferred
;		d2 - --> number of bytes to transfer
;		d3 -     scratch - saved
;		d4 - --> type of transfer to perform
;		d5 -     scratch - saved
;		d6 -     scratch - saved
;
;		a0 - scratch - saved
;		a1 - SCSI chip read base address - NON-SERIALIZED
;		a2 - ptr to data buffer - saved
;		a3 - SCSI chip read base address - SERIALIZED
;		a4 - ptr to SCSI Mgr globals
;		a5 - scratch - saved																		<T2>
;
; Method of Data Transfer: (uses pseudo-DMA mode)
;  0) Make sure we got our intrp from the last cmd send
;  1) Parcel transfer into 64KB blocks since TC regr. handles 64KB max
;  2) Calc. the number of 16-byte block transfers to perform
;  3) Calc. the remaining number of transfers to perform
;  4) Write data 16-byte blocks at a time using word MOVEs
;  5) Wait without timeouts until FIFO is empty ie. 16-byte transfer completed
;  6) Transfer residual byte if there is one
;

SlowWrite_96
			bsr		HandleSelInProg				; handle unfinished select command
			bne.w	@phaseErr					; if it is stuck, we are not in data phase
@doWrite			
			moveq.l	#iPhaseMsk, d0				;
			and.b	rSTA(a3), d0				; are we in data-out phase?
			bne.w	phaseErr1					; data-out phase bits = 0, bra. on phase err	<T4> thru next <T4>

			cmpi.l	#1, d2						; if 1 byte write then...								
			beq.w	OneByteWrite				; ...do 1 byte transfer

			move.l	d2, d6						; d6 = number 64KB block to perform
			swap	d6							; upper word of d6 = lower word of d2
			andi.l	#$0000FFFF, d2				; mask out upper word
			beq.s	@2							; if 0 then we have $10000 (64K) bytes to xfer	ex<SM7> ex<SM12> <Sys7.1>
@next64KB
			moveq.l	#iPhaseMsk, d3				; load mask bits for phase value
			and.b	rSTA(a3), d3				; are we still in data-out phase?
;			and.b	d5, d3						; are we still in data-out phase?
;;			cmpi.b	#iDataOut, d3				; data-out phase bits = 000
			bne.w	@phaseErr					; bra. if phase err

			move.l	d2, d4						; d4 <- d2
			move.b	d4, rXCL(a3)				; TC regr (least-sig. byte) <- d4.b 
			lsr.l	#8, d4						; get upper byte of low word
			move.b	d4, rXCM(a3)				; TC regr (most-sig. byte) <- d4.b
		if nonSerializedIO Then
;			nop									; Force write to complete.				<SM12><Sys7.1>
		endif
			move.b	#cDMAXfer, rCMD(a3)			; load DMA transfer cmd & begin xfers
			nop									; squoosh pipeline								<T8>
												;   DREQ* should be active at this time
			move.l	d2, d4						; d4 <- d2
			lsr.l	#4, d4						; divide xfer count by 16
			ror.l	#1, d2						; xfer byte count to word & remember odd byte
			and.w	#$7, d2						; d2 = remainder word count after 16-byte moves
			neg.w	d2							; negate to form a backward jump offset
			jmp		@emptyWait(d2.w*4)			; bra. into the loop									<T4>
@write16										; 
			nop									; squoosh pipeline								<T8>		
			move.w	(a2)+, rDMA(a1)				; do 16 bytes 									<T7> thru next <T7>
			move.w	(a2)+, rDMA(a1)
			move.w	(a2)+, rDMA(a1)
			move.w	(a2)+, rDMA(a1)
			move.w	(a2)+, rDMA(a1)
			move.w	(a2)+, rDMA(a1)
			move.w	(a2)+, rDMA(a1)
			move.w	(a2)+, rDMA(a1)				;												<T7> from last <T7>
@emptyWait			
		IF nonSerializedIO THEN
			nop									; squoosh pipeline								<T8>
		ENDIF
			btst.b	#bINT, rSTA(a3)				; ...poll for unexpected intrp while waiting
			bne.s	@prematureEnd				; ... maybe disconnected, phase changed, etc.

			moveq.l	#iPhaseMsk, d3				; load mask bits for phase value
			and.b	rSTA(a3), d3				; are we still in data-out phase?
;;			;cmpi.b	#iDataOut, d3				; data-out phase bits = 000
			bne.s	@prematureEnd				; bra. if phase err

			moveq.l	#iFOFMsk, d0				; use mask to get FIFO flag field				<T8>
			and.b	rFOS(a3), d0				; get # of bytes in FIFO
			bne.s	@emptyWait					; bra. if FIFO is empty else...					<T4> thru next <T4>
@1			
			dbra	d4, @write16				; d4 = # of 16-byte tranfers

			btst.l	#31, d2						; check if we have a residual byte
			beq.s	@noResidual					;
@residual			
			move.b	(a2)+, rDMA(a3)				; xfer residual byte							<T8>
		if nonSerializedIO Then
;			nop									; Force write to complete.						<SM7><Sys7.1>
		endif
@noResidual			 
			bsr.w	WaitForIntNoTime			; Wait for intrp w/o timeout
												;    on exit d5 = rFOS|rINT|0|rSTA
			bne.s	@xferErr					; bra. if xfer err
@2			
			move.l	#$10000, d2					; init to transfer 64K bytes					<T4>
			dbra	d6, @next64KB				;
@goodSWrite										; d1 = # of bytes transferred
			moveq.l	#noErr, d0					; successful write op
			rts									; 

@prematureEnd									;												<T4> thru next <T4>
			; 3 reasons to get an intrp 1) when TC=0 (bus service), xfer done 2) premature
			; phase changes (bus service) 3) premature disconnect (disconnect)
			bsr.w	WaitForIntNoTime			; Clear pending intrp & get err status
												;    on exit d5 = rFOS|rINT|0|rSTA
			btst.l	#bTRC, d5					; Maybe we're done xferring data ie. TC=1
			bne.s	@2							; ...so proceed with next 64Kb block
			
			moveq.l	#iPhaseMsk, d3				; load mask bits for phase value
			and.b	d5, d3						; are we still in data-out phase? (d5 from WaitFor call)
			cmpi.b	#iDataOut, d3				; data-out phase bits = 000
			beq.s	@xferErr					; bra. if not phase err
@phaseErr
			moveq.l	#scPhaseErr, d0				; return a phase error
			move.l	#0, d1						; no bytes transferred
			move.l	#0, G_FakeStat(a4) 			; Return a fake status
			bra.s	@bytesXferd

@xferErr			
			moveq.l #scCommErr, d0				; comm error
@bytesXferd
			lsl.l	#4, d4						; multiply by 16
			swap	d6							; calculate bytes left to transfer
			move.w	d4, d6						; get low order word
			moveq.l	#iFOFMsk, d2				;										<T8>
			and.b	rFOS(a3), d2				; add # of un-xferred data in FIFO
			add.l	d2, d6						;
			sub.l	d6, d1						; d1 = bytes xferred
@badSWrite
			move.l	#0, G_FakeStat(a4) 			; Return a fake status
			move.l	#scsiWrite, d6				; load proc ID
			jsr		Error						; call Error proc - for debug
			move.b	#cFlshFFO, rCMD(a3)			; Flush FIFO											<T4>
		if nonSerializedIO Then
;			nop									; Force write to complete.				<SM7><Sys7.1>
		endif
			rts									; 



			
;--------------------------------------------------------------------------
; FastWrite - implements Blind Write
;
;	Called by:	Transfer
;
; All primitive data transfer routines assume:
;
;		d0 - <-- error (if any)
;		d1 - --> copy of d2
;		d1 - <-- bytes transferred
;		d2 - --> number of bytes to transfer
;		d3 -     scratch - saved
;		d4 - --> type of transfer to perform
;		d5 -     scratch - saved
;		d6 -     scratch - saved
;
;		a0 - scratch - saved
;		a1 - SCSI chip read base address - NON-SERIALIZED
;		a2 - ptr to data buffer - saved
;		a3 - SCSI chip read base address - SERIALIZED
;		a4 - ptr to SCSI Mgr globals
;		a5 - scratch - saved
;
; Method of Data Transfer: (uses pseudo-DMA mode)
;  0) Make sure we got our intrp from the last cmd send
;  1) Parcel transfer into 64KB blocks since TC regr. handles 64KB max
;  2) Preload FIFO with non-aligned byte; get us word aligned
;  3) Calc. the number of 32-byte block transfers to perform
;  4) Calc. the remaining number of transfers to perform
;  5) Write data 32-byte blocks at a time using word MOVEs
;  6) Write remaining data using word MOVEs
;  7) Transfer residual byte if there is one

FastWrite_96
		IF forPDMDebug THEN						; <SM12> Jimmy, Jimmy, Jimmy....
			cmp.b	#$44,$CB3					; PDM evt1?
			bne.s	@fast						; -> Nope, its ok to do fast
			bra		SlowWrite_96
@fast
		ENDIF
	
			bsr		HandleSelInProg				; handle unfinished select command
			bne.w	@phaseErr					; if it is stuck, we are not in data phase
@doWrite
			move.b	#cFlshFFO, rCMD(a3)			; Flush FIFO										<T8>
		if nonSerializedIO Then
;			nop									; Force write to complete.				<SM7><Sys7.1>
		endif
			moveq.l	#iPhaseMsk, d0				;
			and.b	rSTA(a3), d0				; are we in data-out phase?
			bne.w	phaseErr1					; data-out phase bits = 0, bra. on phase err			<T4> thru next <T4>
			
			cmpi.l	#1, d2						; if 1 byte write then...
			beq.w	OneByteWrite				; ...do 1 byte transfer

			move.l	d2, d6						; d6 = number 64KB block to perform
			swap	d6							; upper word of d6 = lower word of d2
			andi.l	#$0000FFFF, d2				; mask out upper word
			beq		@2							; if 0 then we have $10000 (64K) bytes to xfer

			move.l	a2, d5						;
			btst.l	#0, d5						; check if input buffer is on word boundary
			bne.w	@misAligned
@next64KB										; buffer is aligned from this point						<T4> thru next <T4>
			move.l	d2, d4						; d4 <- d2
			move.b	d4, rXCL(a3)				; TC regr (least-sig. byte) <- d4.b 
			lsr.l	#8, d4						; get upper byte of low word
			move.b	d4, rXCM(a3)				; TC regr (most-sig. byte) <- d4.b						
		if nonSerializedIO Then
;			nop									; Force write to complete.				<SM12><Sys7.1>
		endif
			move.b	#cDMAXfer, rCMD(a3)			; load DMA transfer cmd & begin xfers
												;   DREQ* should be active at this time
		if nonSerializedIO Then
;			nop									; Force write to complete.				<SM7><Sys7.1>
		endif
			move.w	d2, d4						; d4 = copy of transfer count
			lsr.w	#5, d4						; divide xfer count by 32 
			ror.l	#1, d2						; xfer byte count to word & remember odd byte
			and.w	#$F, d2						; d2 = remainder word count after 32-byte moves
			neg.w	d2							; negate to form a backward jump offset
			nop									; squoosh pipeline						<T8>		
			jmp		@WrLoop(d2.w*4)				; bra. into the loop									<T4>
@write32										; 
			move.w	(a2)+, rDMA(a1)				; do 16 bytes 							<T7> thru next <T7>
			move.w	(a2)+, rDMA(a1)
			move.w	(a2)+, rDMA(a1)
			move.w	(a2)+, rDMA(a1)
			move.w	(a2)+, rDMA(a1)
			move.w	(a2)+, rDMA(a1)
			move.w	(a2)+, rDMA(a1)
			move.w	(a2)+, rDMA(a1)
			
			move.w	(a2)+, rDMA(a1)				; do another 16 bytes
			move.w	(a2)+, rDMA(a1)
			move.w	(a2)+, rDMA(a1)
			move.w	(a2)+, rDMA(a1)
			move.w	(a2)+, rDMA(a1)
			move.w	(a2)+, rDMA(a1)
			move.w	(a2)+, rDMA(a1)
			move.w	(a2)+, rDMA(a1)				;										<T7> from last <T7>
@WrLoop
			dbra	d4, @write32				; d4 = # of 32-byte tranfers			<T4>
		IF nonSerializedIO THEN
			nop									; squoosh pipeline						<T8>	
		ENDIF
												; INT & TC maybe TRUE at this point   
			btst.l	#31, d2						; check if we have a residual byte
			beq.s	@noResidual					;
@residual			
			move.b	(a2)+, rDMA(a3)				; xfer residual byte					<T8>
		if nonSerializedIO Then
;			nop									; Force write to complete.				<SM7><Sys7.1>
		endif
@noResidual			 
			bsr.w	WaitForIntNoTime			; Wait for intrp w/o timeout
												;    on exit d5 = rFOS|rINT|0|rSTA
			bne.s	@xferErr					; bra. if xfer err
@2			
			move.l	#$10000, d2					; init to transfer 64K bytes
			dbra	d6, @next64KB				;
@goodFWrite										; d1 = # of bytes transferred
			moveq.l	#noErr, d0					; successful write op
			rts									; 


@misAligned										;
			subq.l	#1, d2						; adjust for transfer count calc
			move.b	(a2)+, rFFO(a3)				; ...preload fifo with odd byte			<T4> thru next <T4>
		if nonSerializedIO Then
;			nop									; Force write to complete.				<SM7><Sys7.1>
		endif
			bra.w	@next64KB					; now we're word aligned
@phaseErr
			moveq.l	#scPhaseErr, d0				; return a phase error
			bra.s	@bytesXferd					;										<T4>

@xferErr			
			moveq.l #scCommErr, d0				; comm error
@bytesXferd										;										<T4>
			swap	d6							; calculate bytes left to transfer
			move.w	d4, d6						; get low order word
			lsl.l	#5, d6						; multiply by 32
			ext.l	d2							; make d2 a long
			addq.l	#1, d2						; undo adjustment for dbra
			add.l	d2, d6						; add to total
			moveq.l	#iFOFMsk, d2				;										<T8>
			and.b	rFOS(a3), d2				; add un-xferred byte in FIFO
			add.w	d2, d6						;
			sub.l	d6, d1						; result
@badFWrite										;										<T4> thru next <T4>
			move.l	#0, G_FakeStat(a4) 			; Return a fake status
			move.l	#scsiWBlind, d6				; load proc ID
			jsr		Error						; call Error proc - for debug
			move.b	#cFlshFFO, rCMD(a3)			; Flush FIFO							<T4>
		if nonSerializedIO Then
;			nop									; Force write to complete.				<SM7><Sys7.1>
		endif
			rts									; 



			
;--------------------------------------------------------------------------
; FastRead - implements FastRead
;
;	Called by:	Transfer
;
; All primitive data transfer routines assume:
;
;		d0 - <-- error (if any)
;		d1 - --> copy of d2
;		d1 - <-- bytes transferred
;		d2 - --> number of bytes to transfer
;		d3 -     scratch - saved
;		d4 - --> type of transfer to perform
;		d5 - <-- xxxx|xxxx|xxxx|rSTA
;		d6 -     scratch - saved
;
;		a0 - scratch - saved
;		a1 - SCSI chip read base address - NON-SERIALIZED
;		a2 - ptr to data buffer - saved
;		a3 - SCSI chip read base address - SERIALIZED
;		a4 - ptr to SCSI Mgr globals
;		a5 - scratch - saved
;
; Method of Data Transfer: (uses Pseudo-DMA)
;  0) Make sure we got our intrp from the last cmd send
;  1) Parcel transfer into 64KB blocks since TC regr. handles 64KB max
;  2) Read 1st byte if input buffer is NOT word aligned
;  3) Calc. the number of 32-byte block transfers to perform
;  4) Calc. the remaining number of byte transfers to perform
;  5) Read data 32-byte blocks at a time using word MOVEs
;  6) Read remaining data a word at a time
;  7) Transfer residual byte if there is one

FastRead_96
		IF forPDMDebug THEN						; <SM12> Jimmy, Jimmy, Jimmy....
			cmp.b	#$44,$CB3					; PDM evt1?
			bne.s	@fast						; -> Nope, its ok to do fast
			bra		SlowRead_96
@fast
		ENDIF
			bsr		HandleSelInProg				; handle unfinished select command
			bne.w	@phaseErr					; if it is stuck, we are not in data phase
@doRead
			move.b	#cFlshFFO, rCMD(a3)			; Flush FIFO										<T8>
		if nonSerializedIO Then
;			nop									; Force write to complete.							<SM7><Sys7.1>
		endif
			moveq.l	#iPhaseMsk, d0				; load mask for phase bits								<T4> thru next <T4>
			and.b	rSTA(a3), d0				; are we in data-in phase?
			cmpi.b	#iDataIn, d0				; data-in phase bits = 001
			bne.w	phaseErr1					; bra. on phase err

			cmpi.l	#1, d2						; special case a 1 byte transfer					<T10>
			beq.w	OneByteRead					; 
			
			move.l	d2, d6						; d6 = number 64KB block to perform
			swap	d6							; upper word of d6 = lower word of d2
			andi.l	#$0000FFFF, d2				; mask out upper word
			beq		@2							; if 0 then we have $10000 (64K) bytes to xfer
@next64KB
			move.l	d2, d4						; d4 <- d2
			move.b	d4, rXCL(a3)				; TC regr (least-sig. byte) <- d4.b 
			lsr.l	#8, d4						; get upper byte of low word
			move.b	d4, rXCM(a3)				; TC regr (most-sig. byte) <- d4.b						<T4>
			move.b	#cDMAXfer, rCMD(a3)			; load DMA transfer cmd & begin xfers
												;   DREQ* should be active at this time
		if nonSerializedIO Then
;			nop									; Force write to complete.							<SM7><Sys7.1>
		endif
;			move.l	a2, d5						;
;			btst.l	#0, d5						; check if input buffer is on word boundary
;			bne.s	@misAligned
@aligned
			move.w	d2, d4						; d4 = copy of transfer count
			lsr.w	#5, d4						; divide xfer count by 32 							<T4> thru next <T4>
			ror.l	#1, d2						; xfer byte count to word & remember odd byte
			and.w	#$F, d2						; d2 = remainder word count after 32-byte moves
			neg.w	d2							; negate to form a backward jump offset
			nop									; squoosh pipeline								<T8>
			jmp		@RdLoop(d2.w*4)				; bra. into the loop							<T4>
@read32											; 
			move.w	rDMA(a1), (a2)+				; do 16 bytes  									<T7> thru next <T7>
			move.w	rDMA(a1), (a2)+
			move.w	rDMA(a1), (a2)+
			move.w	rDMA(a1), (a2)+
			move.w	rDMA(a1), (a2)+
			move.w	rDMA(a1), (a2)+
			move.w	rDMA(a1), (a2)+
			move.w	rDMA(a1), (a2)+
			
			move.w	rDMA(a1), (a2)+				; do another 16 bytes
			move.w	rDMA(a1), (a2)+
			move.w	rDMA(a1), (a2)+
			move.w	rDMA(a1), (a2)+
			move.w	rDMA(a1), (a2)+
			move.w	rDMA(a1), (a2)+
			move.w	rDMA(a1), (a2)+
			move.w	rDMA(a1), (a2)+				;												<T7> from last <T7>
@RdLoop											;													<T4> thru next <T4>		
			dbra	d4, @read32					; d4 = # of 32-byte transfers
		IF nonSerializedIO THEN
			nop									; squoosh pipeline								<T8>
		ENDIF
												; INT & TC bits should be TRUE at this point
			bsr.w	WaitForIntNoTime			; Wait for intrp w/o timeout
												;    on exit d5 = rFOS|rINT|0|rSTA
			bne.s	@xferErr					; bra. if xfer err
			btst.l	#31, d2						; check if we have a residual byte
			beq.s	@2							; bra. if no residual
@residual
			bsr		WtForFIFOData				; returns number of bytes in FIFO		<T8>
			beq.s	@timedOut					;										<T8>
			move.b	rFFO(a3), (a2)+				; xfer residual byte
@2			
			move.l	#$10000, d2					; init to transfer 64K bytes						<T4>	
			dbra	d6, @next64KB				;
@goodFRead										; d1 = # of bytes transferred
			moveq.l	#noErr, d0					; successful read op
			rts									; 


@misAligned
			subq.l	#1, d2						; decr. for DBRA									<T4> thru next <T4>
			move.b	rFFO(a3), (a2)+				; xfer byte from fifo into input buffer
			bra.s	@aligned					; transfer the rest of data

@timedOut										;										<T8>
			moveq.l	#scBusTOErr, d0				; if we timed out, return error			<T8>
			bra.s	@bytesXferd					;										<T8>

@phaseErr
			moveq.l	#scPhaseErr, d0				; return a phase error
			bra.s	@bytesXferd					;													<T4>

@xferErr
			moveq.l #scCommErr, d0				; comm error
@bytesXferd										;													<T4>
			swap	d6							; calculate bytes left to transfer
			move.w	d4, d6						; get low order word
			lsl.l	#5, d6						; multiply by 32
			ext.l	d2							; make d2 a long
			addq.l	#1, d2						; undo adjustment for dbra
			add.l	d2, d6						; add to total
			sub.l	d6, d1						; d1 = xfer count - bytes remaining to xfer			<T4> thru next <T4>
@badFRead
			move.l	#0, G_FakeStat(a4) 			; Return a fake status
			move.l	#scsiRBlind, d6				; load proc ID
			jsr		Error						; call Error proc - for debug
			move.b	#cFlshFFO, rCMD(a3)			; Flush FIFO										<T4>
		if nonSerializedIO Then
;			nop									; Force write to complete.							<SM7><Sys7.1>
		endif
			rts									;




			
;--------------------------------------------------------------------------				<T8> to next <T8>
;
;	WtForFIFOData - wait for 256mS for the data to show up in the FIFO
;
;		a3	-> SCSI chip read base address - SERIALIZED
;		d0	<- number of bytes in FIFO (zero if timed out)
;		Z	<- .eq.=timed out		.ne.=bytes available
;
WtForFIFOData
			movem.l	d1-d2, -(sp)
			move.w	TimeSCSIDB, d1				; get # of DBRAs
			lsl.l	#8, d1						; multiply by 256
			move.l	d1, d2						; ...a 256mS wait
			swap	d2
@1
			moveq.l	#iFOFMsk, d0
			and.b	rFOS(a3), d0				; read FIFO flags regr
			dbne	d1, @1						; loop until data or timeout
			dbne	d2, @1						; 
			movem.l	(sp)+,d1-d2
			rts									;										<T8> from prev <T8>



			
;--------------------------------------------------------------------------
;
;	ResetBus - Reset the SCSI bus by asserting the SCSI Reset Output signal
;				for some number of uS as determined by the clock conv. factor (CCF)
;
;		a3 - SCSI chip read base address - SERIALIZED
;

ResetBus_96
												; disable all intrps
			move.b	#cRstSBus, rCMD(a3)			; load reset scsi bus cmd							<T3>
												; re-enable all intrps
		if nonSerializedIO Then
;			nop									; Force write to complete.							<SM7><Sys7.1>
		endif
			rts	



			
;--------------------------------------------------------------------------
;
; WaitForIntNoTime - infinite loop to wait for a SCSI intrp.
;
; Uses: d0, d5
;
; On exit: 	d5 = rFOS|rINT|0|rSTA, byte values from the Seq.Step, Status & INT regrs.				<T2>
;
; 			CCR.z = 1, means successful wait
;			CCR.z = 0, means failed due to disconnect or lack of bus service req.

WaitForIntNoTime
@noTimeoutWait
			clr.l	d5							;
			move.b	rSTA(a3), d5				; read Status regr
			btst.l	#bINT, d5					; poll intrp on status regr. for pending intrp
			beq.s	@noTimeoutWait				; ...loop until intrp req is detected
			
			swap	d5							;
			move.b	rFOS(a3), d5				; read FIFO flag/Sequence Step regr
			lsl.w	#8, d5						; shift left by 1 byte
			move.b	rINT(a3), d5				; read & clear rFOS, rSTA & rINT
			move.l	d5, d0						; we got here because of an intrp
			swap	d5							; d5 = rFOS|rINT|0|rSTA								<T2>
			andi.b	#iDcBsMsk, d0				; get Disconnect & Bus Service bits
			cmpi.b	#iDcBsOK, d0				; expecting: not disconnected
												;    & target request info xfer phase
			rts									; d5 = rFOS|rINT|0|rSTA								<T4> thru next <T4>
			


			
;--------------------------------------------------------------------------
;
;	HandleSelInProg
;
;	0 if no select in progress or if select is now complete
;	1 if a select is still in progress (i.e. in cmd or msg_out phase)
;
HandleSelInProg
			btst.b	#SelInProg, G_State96(a4)		; is Select cmd still in progress?
			beq.w	@skipIt							; no - skip it

			btst.b	#NeedMsgOut, G_State96(a4)		; are we expecting a Msg_Out phase?
			beq.s	@chkCmd							; no - see about Command
			move.b	#iMsgOut, d1					; yes - wait for this phase or interrupt
			bra.s	@doWait
@chkCmd
			btst.b	#NeedCmdSent, G_State96(a4)		; are we expecting a Command phase?
			beq.s	@wtForFC						; no - wait for an interrupt then
			move.b	#iCommand, d1					; yes - wait for this phase or interrupt
@doWait
			bsr.s	Wt4DREQorInt
			bne.s	@gotDREQ
@gotInt
			bclr.b	#FCIntPend, G_State96(a4)		; clear the FC Int pend flag			<T8>
			bclr.b	#SelInProg, G_State96(a4)		; and clear the SelectInProgress flag	<T8>
			bclr.b	#NeedMsgOut, G_State96(a4)		; and Message_Out  						<T9>
			bclr.b	#NeedCmdSent, G_State96(a4)		; and Command expected flags			<T9>
			tst.b	d0								; setup result again
@gotDREQ
@skipIt
			rts
			
@wtForFC
			bsr.w	WaitForIntNoTime
			move.b	#cFlshFFO, rCMD(a3)				; Flush FIFO							<3>
		if nonSerializedIO Then
;			nop									; Force write to complete.					<SM7><Sys7.1>
		endif
			moveq.l	#0, d0
			bra.s	@gotInt



			
;--------------------------------------------------------------------------
;
; Wt4DREQorInt - infinite loop to wait for a DREQ signal or SCSI chip intrp.
;
; Uses: d3, d5
;
;	Entry:
;		--> d1	 = phase to wait for (concurrent with DREQ)
;
;		--> G_SCSIDREQ(a4)	= addr of DAFB reg (for reading value of 
;
;	Exit:
;		<-- d5	 = rFOS|rINT|0|rSTA, byte values from the Seq.Step, Status & INT regrs.
;		<-- d0	 = 1 if DREQ,  0 if Int
;
;-----------------

Wt4DREQorInt
			jsr		SCSIpcTo32bit				; clean up PC first

	; Check for interrupt first (to avoid unnecessary dog-slow DREQ check)
@noTimeout		
			clr.l	d5							;
			move.b	rSTA(a3), d5				; read Status regr
			btst.l	#bINT, d5					; poll intrp on status regr. for pending intrp
			bne.s	@gotInt						; 

	; If no Interrupt, check for DREQ (go into and out of 32-bit mode to check)
		; into 32-bit mode
			moveq	#true32B, d0				; switch to 32-bit mode to look at SCSI config regr 					
			jsr		SwapMMU						; do it, puts previous mode in D0

			move.l	G_SCSIDREQ(a4), a0			; G_SCSIDREQ contains DREQ regr address
		IF forPDMDebug THEN						;								<SM7>
			move.b	(a0), d5					; read DAFB regr (a0=DAFB register addr)
		ELSE
			move.l	(a0), d5					; read DAFB regr (a0=DAFB register addr)
		ENDIF

		; out of 32-bit mode (return to previous mode - already in D0)
			jsr		SwapMMU						; do it, call _SwapMMUMode jump vector

		; DREQ?
			move.b	G_bitDREQ(a4),d0			; load DREQ bit position		<5> jab
			btst.l	d0, d5						; DREQ ?						<5> jab
			beq.s	@noTimeout					; no: try again

@gotDREQ
			move.b	rSTA(a3), d3				; get phase value								<T9> to next <T9>
			and.b	#iPhaseMsk, d3				; load mask bits for phase value
			cmp.b	d3, d1						; are we in requested phase?
			bne.s	@noTimeout					;  
			moveq.l	#1, d3						; return value = Got DREQ
			bra.s	@exit

	; Get sequence and FIFO status registers into D5 (already got rSTA)
@gotInt			
			swap	d5							;
			move.b	rFOS(a3), d5				; read FIFO flag/Sequence Step regr
			lsl.w	#8, d5						; shift left by 1 byte
			move.b	rINT(a3), d5				; read & clear rFOS, rSTA & rINT
			move.l	d5, d0						; we got here because of an intrp
			swap	d5							; d5 = rFOS|rINT|0|rSTA
			moveq.l	#0, d3						; return value = Got Interrup

@exit
			move.l	d3, d0
			rts									;



			
;--------------------------------------------------------------------------
;
; WaitForSCSIIntrp
;
; Proc to wait for the SCSI interrupt with a 256mS watchdog timer.
;
; Uses: d0, d3, d5
;
; On exit: 	d5 = rFOS|rINT|0|rSTA, byte values from the Seq.Step,
;										Status & INT regrs.
; 			ccr.z = 1, means timedOut

WaitForSCSIIntrp
			clr.l	d5
			moveq.l	#0, d3					; clear upper word
			move.w	TimeSCSIDB, d3			; get # of DBRAs
			lsl.l	#8, d3					; multiply by 256
			move.l	d3, d0					; ...a 256mS wait
			swap	d0
@1
			move.b	rSTA(a3), d5			; read Status regr
			btst.l	#bINT, d5				;  check for c96 INTRP
			dbne	d3, @1					; loop until INT is active or timeout
			dbne	d0, @1					; loop until INT is active or timeout
			beq.s	@timedOut				;

			swap	d5
			move.b	rFOS(a3), d5			; read FIFO flag/Sequence Step regr
			lsl.w	#8, d5					; shift left by 1 byte
			move.b	rINT(a3), d5			; read & clear rFOS, rSTA & rINT
@exit			
			swap	d5						;
			btst.l	#bINT, d5				; set condition bits
			rts								; d5 = rFOS|rINT|0|rSTA

@timedOut
			swap	d5
			move.b	rFOS(a3), d5			; read FIFO flag/Sequence Step regr
			lsl.w	#8, d5					; shift left by 1 byte
			move.b	#0,	d5					; clear rINT value
			bra.s	@exit					;



			
;--------------------------------------------------------------------------
; FastCompare - implements FastRead
;
;	Called by:	Transfer
;
; All primitive data transfer routines assume:
;
;		d0 - <-- error (if any)
;		d1 - --> copy of d2
;		d1 - <-- bytes transferred
;		d2 - --> number of bytes to transfer
;		d3 -     scratch - saved
;		d4 - --> type of transfer to perform
;		d5 - <-- xxxx|xxxx|xxxx|rSTA
;		d6 -     scratch - saved
;
;		a0 - scratch - saved
;		a1 - SCSI chip read base address - NON-SERIALIZED
;		a2 - ptr to data buffer - saved
;		a3 - SCSI chip read base address - SERIALIZED
;		a4 - ptr to SCSI Mgr globals
;		a5 - scratch - saved
;
; Method of Data Transfer: (uses Pseudo-DMA)
;  0) Make sure we got our intrp from the last cmd send
;  1) Parcel transfer into 64KB blocks since TC regr. handles 64KB max
;  2) Read 1st byte if input buffer is NOT word aligned
;  3) Calc. the number of 32-byte block transfers to perform
;  4) Calc. the remaining number of byte transfers to perform
;  5) Read data 32-byte blocks at a time using word MOVEs
;  6) Read remaining data a word at a time
;  7) Transfer residual byte if there is one

FastComp_96
		IF forPDMDebug THEN						; <SM12> Jimmy, Jimmy, Jimmy....
			bra		SlowComp_96
		ENDIF
			bsr		HandleSelInProg				; handle unfinished select command
			bne.w	@phaseErr					; if it is stuck, we are not in data phase
@doRead
			moveq.l	#iPhaseMsk, d0				; load mask for phase bits								<T4> thru next <T4>
			and.b	rSTA(a3), d0				; are we in data-in phase?
			cmpi.b	#iDataIn, d0				; data-in phase bits = 001
			bne.w	phaseErr1					; bra. on phase err
			
			cmpi.l	#1, d2						; special case a 1 byte compare							<T10>
			beq.w	SlowComp_96					; 														<T5>

			clr.l	d3							; init compare status							
			move.l	d2, d6						; d6 = number 64KB block to perform
			swap	d6							; upper word of d6 = lower word of d2
			andi.l	#$0000FFFF, d2				; mask out upper word
			beq.s	@2							; if 0 then we have $10000 (64K) bytes to xfer
@next64KB
			move.l	d2, d4						; d4 <- d2
			move.b	d4, rXCL(a3)				; TC regr (least-sig. byte) <- d4.b 
			lsr.l	#8, d4						; get upper byte of low word
			move.b	d4, rXCM(a3)				; TC regr (most-sig. byte) <- d4.b
			move.b	#cDMAXfer, rCMD(a3)			; load DMA transfer cmd & begin xfers
												;   DREQ* should be active at this time
		if nonSerializedIO Then
;			nop									; Force write to complete.				<SM7><Sys7.1>
		endif

			ror.l	#1, d2						; xfer byte count to word & remember odd byte
			subq.w	#1, d2						; adjust for DBRA
@RdAndCmp
			move.w	rDMA(a3), d0				;										<T8>
			cmp.w	(a2)+, d0					; compare a word at a time
			beq.s	@Ok
			moveq.l	#scCompareErr, d3 			; record a compare error
@Ok
			dbra	d2, @RdAndCmp				; loop until done
												; INT & TC bits should be TRUE at this point
			bsr.w	WaitForIntNoTime			; Wait for intrp w/o timeout
												;    on exit d5 = rFOS|rINT|0|rSTA
			bne.s	@xferErr					; bra. if xfer err
			btst.l	#31, d2						; check if we have a residual byte
			beq.s	@2							; bra. if no residual
@residual
			move.b	rFFO(a3), d0				; read byte data from FIFO
			cmp.b	(a2)+, d0					; xfer byte from FIFO into input buffer
			beq.s	@2
			moveq.l	#scCompareErr, d3 			; record a compare error
@2			
			move.l	#$10000, d2					; init to transfer 64K bytes
			dbra	d6, @next64KB				;
@ExitFCmp										; d1 = # of bytes transferred
			move.l	d3, d0						; return status			
			rts									; 

@phaseErr
			moveq.l	#scPhaseErr, d0				; return a phase error
			bra.s	@bytesXferd

@xferErr
			moveq.l #scCommErr, d0				; comm error
@bytesXferd
			swap	d6							; calculate bytes left to transfer
			move.w	d4, d6						; get low order word
			lsl.l	#5, d6						; multiply by 32
			ext.l	d2							; make d2 a long
			addq.l	#1, d2						; undo adjustment for dbra
			add.l	d2, d6						; add to total
			sub.l	d6, d1						; d1 = xfer count - bytes remaining to xfer
@badFRead
			move.l	#0, G_FakeStat(a4) 			; Return a fake status
			move.l	#scsiRBlind+$F0, d6			; load proc ID, Fast compare
			jsr		Error						; call Error proc - for debug
			move.b	#cFlshFFO, rCMD(a3)			; Flush FIFO
		if nonSerializedIO Then
;			nop									; Force write to complete.				<SM7><Sys7.1>
		endif
			rts									; 
			


			
;--------------------------------------------------------------------------
; SlowComp - implements Polled Read 
;
;	Called by:	Transfer
;
; All primitive data transfer routines assume:
;
;		d0 - <-- error (if any)
;		d1 - --> copy of d2
;		d1 - <-- bytes transferred
;		d2 - --> number of bytes to transfer
;		d3 -     scratch - saved
;		d4 - --> type of transfer to perform
;		d5 -     scratch - saved
;		d6 -     scratch - saved
;
;		a0 - scratch - saved
;		a1 - SCSI chip read base address - NON-SERIALIZED
;		a2 - ptr to data buffer - saved
;		a3 - SCSI chip read base address - SERIALIZED
;		a4 - ptr to SCSI Mgr globals
;		a5 - scratch - saved
;
; Method of Data Transfer: (pDMA and programmed IO)											<T5> to next <T5>
;  0) Make sure we got our intrp from the last cmd send
;  1) calculate # of 16-byte block transfers to perform using pDMA & remember the remainder
;  2) Enable c96 DMA and wait till the 16-byte FIFO is full and DREQ is asserted for the 17th byte
;  3) Transfer all data in the FIFO and wait for the intrp
;  4) Repeat until all block have been transferred
;  5) Transfer remaining data using non-DMA transfer command byte then 
;		Wait and poll for byte-in-fifo interrupt
;  6) Transfer data from fifo to input buffer
;  7) Repeat process until all remaining bytes have been transferred

SlowComp_96
			bsr		HandleSelInProg				; handle unfinished select command
			bne.w	@phaseErr					; if it is stuck, we are not in data phase
@doRead
			moveq.l	#iPhaseMsk, d0				; load mask for phase bits
			and.b	rSTA(a3), d0				; are we in data-in phase?
			cmpi	#iDataIn, d0				; data-in phase bits = 001
			bne.w	phaseErr1					; bra. on phase err
			
			clr.l	d3							; init compare status
			move.l	d2, d4						; d4 = copy of transfer count
			lsr.l	#4, d4						; divide xfer count by 16
			beq.w	@16orLess					; bra. if < 16 bytes
			subq.l	#1, d4						; adjust for DBRA
			move.l	d4, d6						; d4.w has lower 16-byte block count
			swap	d6							; d6.w has upper 16-byte word count
@16orMore
			; The next few lines are necessary in order to poll a DREQ in nuBus
			; address space.  We don't need to do this if we're xferring <16 bytes.
			
			jsr		SCSIpcTo32bit				; use pc relative
		    move.b	MMU32Bit, -(sp)				; save current mode on stack
			moveq	#true32B, d0				; switch to 32-bit mode to look at SCSI config regr 					
			jsr		SwapMMU						; do it, call _SwapMMUMode jump vector
			move.l	a2, d0						; get destination addr in d0						
			_StripAddress						; clear upper byte if necessary
			move.l	d0, a2						; a2 = clean buffer ptr
			move.l	G_SCSIDREQ(a4), a0			; load SCSI DREQ regr
			
			move.b	#0, rXCM(a3)				; rXCM = 0, clear most-sig. byte count
			move.b	#$10, rXCL(a3)				; rXCL = 16 bytes, least-sig. byte value
			and.l	#$F, d2						; d2 = remainder word count after 16-byte moves
@read16			
			move.b	#cDMAXfer, rCMD(a3)			; load DMA transfer cmd & start loading FIFO
		if nonSerializedIO Then
;			nop									; Force write to complete.				<SM7><Sys7.1>
		endif
@1												;   currently loaded transfer count is used/reused
			btst.b	#bINT, rSTA(a3)				; poll for unexpected intrp while waiting
			bne.s	@prematureEnd				; ... maybe disconnected, phase changed, etc.
			btst.b	#bTRC, rSTA(a3)				; check if we've rcvd all the data
			beq.s	@1							; loop until FIFO is full
			
			; We need 16 guaranteed DREQs to safely transfer 16 bytes without bus error.
			; Ideally, DREQ should be active as long there are threshold number of bytes in the
			; FIFO--as the c96 user's guide imply.  But the c96 implementation also requires that
			; REQ be active in order to get DREQ.  This is why we must wait for the 17th REQ from
			; the target--and it must remain active--before we proceed with the 16-byte transfer.

		IF forPDMDebug THEN						;								<SM7>
			move.b	(a0), d5					; read DAFB regr (a0=DAFB register addr)
		ELSE
			move.l	(a0), d5					; read DAFB regr (a0=DAFB register addr)
		ENDIF
			move.b	G_bitDREQ(a4),d0			; load DREQ bit position		<5> jab
			btst.l	d0, d5						; DREQ ?						<5> jab
			beq.s	@1							; loop until asserted
			move.w	#$7, d5						; load loop counter, 8 words
@cmpFFO	
			move.w	rDMA(a3), d0				;												<T8>
			cmp.w	(a2)+, d0					; compare a word at a time
			beq.s	@Ok1
			moveq.l	#scCompareErr, d3 			; record a compare error
@Ok1		dbra	d5, @cmpFFO					; continue with compare operation
@2												; Intrp should occur after ALL data have been
												;    read out of the FIFO
			btst.b	#bINT, rSTA(a3)				;  check for c96 INTRP
			beq.s	@2							;  loop until we get the intrp
			
			move.b	rINT(a3), d5				; read Intrp regr & clear rSTA, rSQS & rINT
			btst.l	#bDSC, d5					; check for disconnected intrp 
			bne.s	@premature2					; Branch if transfer error

			dbra	d4, @read16					; loop until done, d4 is lower word count
			dbra	d6, @read16					; loop until done, d6 is upper word count
			move.b	(sp)+, d0					; switch to previous address mode
			jsr		SwapMMU						; do it, call _SwapMMUMode jump vector
			bra.s	@16OrLess					; take care of remaining data, if any
@rdSingle										; use non-pDMA for remainder
			moveq.l	#iPhaseMsk, d5				; load mask bits for phase value
			and.b	rSTA(a3), d5				; are we still in data-in phase?
			cmpi.b	#iDataIn, d5				; data-in phase bits = 001
			bne.s	@phaseErr					; bra. on phase err
			move.b	#cIOXfer, rCMD(a3)			; load IO transfer cmd & begin xfers
		if nonSerializedIO Then
;			nop									; Force write to complete.				<SM7><Sys7.1>
		endif
@3
			btst.b	#bINT, rSTA(a3)				; check for c96 INTRP
			beq.s	@3							; loop until we get an intrp
			move.b	rFFO(a3), d0				; read byte data from FIFO
			cmp.b	(a2)+, d0					; xfer byte from FIFO into input buffer
			beq.s	@Ok2
			moveq.l	#scCompareErr, d3 			; record a compare error
@Ok2
			move.b	rINT(a3), d5				; read Intrp regr & clear rSTA, rSQS & rINT
			btst.l	#bDSC, d5					; check for disconnected intrp 
			bne.s	@xferErr					; Branch if transfer error
@16OrLess
			dbra	d2, @rdSingle				; read the rest of the remainders
@ExitCmp										; d1 = # of bytes transferred
			move.l	d3, d0						; return status			
			rts									; 

@prematureEnd
			bsr.w	WaitForIntNoTime			; Clear pending intrp & get err status
												;    on exit d5 = rFOS|rINT|0|rSTA
@premature2
			move.b	(sp)+, d0					; switch to previous address mode
			jsr		SwapMMU						; do it, call _SwapMMUMode jump vector
												; calc how many bytes were xferred...
			addq.w	#1, d4						; undo adjustment for dbra
			swap	d6							; calculate bytes left to transfer
			move.w	d4, d6						; form long word count
			lsl.l	#4, d6						; mult by 16

			and.b	#iPhaseMsk, d5				; are we still in data-in phase?
			cmpi.b	#iDataIn, d5				; data-in phase bits = 001
			beq.s	@xferErr					; bra. to check for disconnect
@phaseErr
			moveq.l	#scPhaseErr, d0				; return a phase error
			bra.s	@badSCmp					;

@xferErr										; anything else is a comm. err
			moveq.l #scCommErr, d0				; transfer error
@badSCmp
			add.l	d2, d6						; add un-xferred remainder
			sub.l	d6, d1						; number of bytes transferred

			move.l	#scsiRead+$F0, d6			; load proc ID, Slow compare
			jsr		Error						; call Error proc - for debug
			move.b	#cFlshFFO, rCMD(a3)			; Flush FIFO
		if nonSerializedIO Then
;			nop									; Force write to complete.				<SM7><Sys7.1>
		endif
			rts									; 										<T5>
			


			
;___________________________________________________________________________		<T8> to next <T8>
;
;	BusErrHandler_96
;		When the SCSI Mgr is performing a blind data transfer, it patches
;		out the bus error vector.  The old SCSI Mgr bus error handler
;		assumed that if it got called, it must be handling a SCSI bus error.
;		Unfortunately, NuBus cards could bus error while the SCSI Mgr is
;		installed.  To be a better bus error citizen, the SCSI bus error
;		handler now checks that the fault address is the SCSI chip, and if
;		not, it chains to the bus error handler that it replaced.
;
;		This code returns control to Transfer_96 and not to the routine
;		caused the bus error.  It does this by popping off the buserr stack
;		frame and then doing an RTS, so...
;		 DON'T PUT ANYTHING ON THE STACK IN TRANSFER ROUTINES (FastRead,
;		Fast…, etc.).  At least don't leave it there during periods where a
;		buserr may be possible.
;
___________________________________________________________________________;

		WITH	AEXFrame, XferFrame

savedRegs	REG		D0-D3/A0-A1		; save these registers because we need to use them			<jab> added D3
savedRSize	EQU		6*4				; # bytes on stack for saved registers						<jab> added D3

BusErrHandler_96

; Is it our fault? -----
			subq.l	#4, sp						; make room for return addr (@notSCSIFault)
			movem.l	savedRegs, -(sp)
			lea		savedRSize+4(sp), A0		; make A0 our AEXFrame pointer (regs+1 LW on stack)

			cmp.l	SCSIGlobals, A4				; equal if this is from our transfer routine
			bne.s	@notSCSIFault

			btst.b	#HandleBusErrs, G_State96(A4)	; are we supposed to be active?
			beq.s	@notSCSIFault					; no - not SCSI's fault
			
			move.l	SCSIBase, D0				; check if bus err on SCSI Bus0 address
			addi.l	#rDMA, D0					; add pseudo-DMA offset
			cmp.l	FaultAddr(A0), D0 			; compare with faulted address
			beq.s	@SCSIFault					; if so, start processing the bus error
			addi.l	#nonSerlzdDisp, D0			; add non-serialized offset
			cmp.l	FaultAddr(A0), D0 			; compare with faulted address
			beq.s	@SCSIFault					; if so, start processing the bus error
			
			move.l	SCSI2Base, D0				; check if bus err on SCSI Bus1 address
			addi.l	#rDMA, D0					; add pseudo-DMA offset
			cmp.l	FaultAddr(A0), D0 			; compare with faulted address
			beq.s	@SCSIFault					; if so, start processing the bus error
			addi.l	#nonSerlzdDisp, D0			; add non-serialized offset
			cmp.l	FaultAddr(A0), D0 			; compare with faulted address
			beq.s	@SCSIFault					; if so, start processing the bus error

; It's not our fault ------

@notSCSIFault
			move.l	SCSIGlobals, A0				; put entry point to prev BEH on stack
			move.l	yeOldeBusErrVct(A0), savedRSize(sp)	; (registers saved beneath return addr)
			movem.l	(sp)+, savedRegs			; restore regs
			rts									; jump to old handler, assuming it'll RTE

; It's all our fault (blame it on us) ------

@SCSIFault

;		old timed routine (using Ticks instead of TimeSCSIDB)
;			cmp.l	BusErrAddr(A6), A2			; did we buserr at this point in the xfer b4?
;			beq.s	@oldBusErr
;@newBusErr
;			move.l	A2, BusErrAddr(A6)			; remember point in xfer that we got buserr
;			move.l	blindBusTO(A4), D0			; init BusErrTO with…
;			add.l	Ticks, D0					; BlindBusTO+Ticks
;			move.l	D0, BusErrTO(A6)
;@oldBusErr

		; Wait for either DREQ, or INT or a timeout (from blindBusTO value)			

			jsr		SCSIpcTo32bit				; use pc relative
			moveq	#true32B, D0				; switch to 32-bit mode to look at SCSI config regr 					
			jsr		SwapMMU						;  (sets up d0 with previous mode)
			move.w	D0, -(sp)					; save D0 (contains previous MMU mode)
			move.l	G_SCSIDREQ(A4), A1			; G_SCSIDREQ contains DREQ regr address

			move.l	(A1), D0					; read DAFB regr
			move.b	G_bitDREQ(a4),d3			; load DREQ bit position		<5> jab
			btst.l	d3, d0						; DREQ ?						<5> jab
			bne.s	@retry

			move.l	blindBusTO(A4), D1
			bra.s	@outerbtm					; bra to bottom of loop for zero case				<2>
@outerTop
			move.w	TimeSCSIDB, D2
			lsr.w	#1, D2						; divide by 2 (because of 5 instr'ns instead of 2)	<2>
@1
			move.l	(A1), D0					; read DAFB regr
			btst.l	d3, d0						; DREQ ?						<5> jab
			bne.s	@retry
			btst	#bINT, rSTA(A3)				; see if we have a phase change or something
			dbne	D2, @1
			bne.s	@phzChange					; 
@outerbtm
			dbra	D1, @outerTop				; loop dec. on low word of blindBusTO
			sub.l	#$00010000, D1				; sub 1 from high word of blindBusTO
			bcc.s	@outerTop					; loop if result >=0
			bra.s	@cleanup

	; if DREQ, retry the transfer -----
@retry
			move.w	(sp)+, D0					; get previous MMU mode into D0
			jsr		SwapMMU						; return to previous mode

	; Clean up the writebacks on the stack frame				<5> thru to next <5> jab

			move.w	WB1S(A0), D0				; check WB1 for validity
			move.l	WB1A(A0), A1				; pass WB Address 
			move.l	WB1D(A0), D1				; pass WB Data
			bsr.w	DoWriteBack					; to routine that takes care of it

			move.w	WB2S(A0), D0				; check WB2 for validity
			move.l	WB2A(A0), A1				; pass WB Address 
			move.l	WB2D(A0), D1				; pass WB Data
			bsr.w	DoWriteBack					; to routine that takes care of it

			move.w	WB3S(A0), D0				; check WB3 for validity
			move.l	WB3A(A0), A1				; pass WB Address 
			move.l	WB3D(A0), D1				; pass WB Data
			bsr.w	DoWriteBack					; to routine that takes care of it			<5> jab
			movem.l	(sp)+, savedRegs			; restore regs
			addq.l	#4, sp
			rte									; haven't reached max retry count, so restart

	; if phase change or timeout, cleanup and abort the transfer -----
@phzChange				
@cleanup
		; return to previous MMU mode and return SP to the exception stack frame
		
			move.w	(sp)+, D0					; get previous MMU mode into D0
			jsr		SwapMMU						; return to previous mode

			movem.l	(sp)+, savedRegs			; restore regs
			addq.l	#4, sp						; take scratch space off stack

		; get any leftover bytes out of the FIFO if we were doing a FastRead
		
			cmp.w	#scsiReadFast, transferType(A4)
			bne.s	@skipLeftovers
			move.b	rFOS(a3), D0				; get FIFO status - how many bytes in FIFO
			and.w	#iFOFMsk, D0				; 
			ror.l	#1, D0
			bra.s	@btm0
@top0
			move.w	rDMA(a3), (A2)+				; get word from chip and put into user's buffer
@btm0
			dbra	D0, @top0
			tst.l	D0
			bpl.s	@2
			move.b	rFFO(a3), (A2)+				; get byte from chip and put into user's buffer
@2			
			
	; get rid of excp'n frame and create a throwaway frame for return to Transfer_96

@skipLeftovers
			move.w	xSR(sp), D0					; save SR for new exception frame
			bfextu	FrameType(sp){0:4}, D1		; get format code from stack

			cmp.b	#AEXFrameType, D1			; check for 040 Access Error Exception Frame
			beq.s	@Drop040XFrame				; dispose of 040 AE exception frame	
			cmp.b	#shortBEXFrameType, D1		; short 020/030 exception frame?
			bne.s	@Drop46w					; no, so use larger frame
			adda.w	#shortBEXFrameSize, sp		; dispose of the 16-word frame
			bra.s	@DummyFrame					;  and finish up

@Drop040XFrame									; 040 Bus Error frame-cleaning done here
			add.w	#aeXFrameSize, sp			; remove 040 Access Error Exception Frame
			bra.s	@DummyFrame					; and create dummy return frame

@Drop46w
			add.w	#46*2, sp					; size of exception frame
			
@DummyFrame
		; Fake a format code 0 exception frame (4 words) to finish cleaning up

			move.w	zeroReg, -(sp)				; format code 0
			pea		FinishErr					; PC value
			move.w	d0, -(sp)					; sr value
			rte									; 'return' from the fake exception


; If we busErr due to a slow peripheral then the c96 is still expecting to transfer
; data since it has no concept of bus error.  Hopefully, the client upon seeing busTOErr
; will do the right thing and call SCSIComplete to clean up the bus.

;-----------------
FinishErr
;-----------------
; What we really need to do here is to first empty the FIFO the call Wt4DREQorINT
; then do the right thing. %%%
			moveq.l	#scBusTOErr, d0				; assume bus timeout
			btst.b	#bINT, rSTA(a3)				; poll for intrp due to premature phase change
			beq.s	@ErrorDone					; bra. if no SCSI intrp 'cuz we busTO
			move.b	rINT(a3), d5				; got intrp so check cause also read & clear rFOS, rSTA & rINT 
			btst.l	#bBSS, d5					; test for bus service intrp
			beq.s	@ErrorDone					; bra. if not bus service
			moveq.l	#scPhaseErr, d0				; yup it's a premature phase change
@ErrorDone
			rts									; return status in d0 to the Transfer routine		<T8> from prev <T8>										

;-----------------
DoWriteBack
;-----------------
			btst	#bValid, D0					; if this writeback valid?
			beq.s	@wbDone						; no - done
			
			and.w	#SIZE_MSK, D0				; yes, transfer proper size
			
			cmp.w	#WB_BYTE, D0
			bne.s	@1
			move.B	D1, (A1)					; move Byte
			bra.s	@wbDone
@1
			cmp.w	#WB_WORD, D0
			bne.s	@2
			move.W	D1, (A1)					; move Word
			bra.s	@wbDone
@2
			cmp.w	#WB_LONG, D0
			bne.s	@wbDone
			move.L	D1, (A1)					; move LongWord
@wbDone
			rts
			
		ENDWITH
		


			
;==========================================================================

		ENDWITH

		END