mirror of
https://github.com/elliotnunn/sys7.1-doc-wip.git
synced 2024-12-12 20:29:12 +00:00
3222 lines
114 KiB
Plaintext
3222 lines
114 KiB
Plaintext
;
|
||
; File: VSCDriver.a
|
||
;
|
||
; Contains: This file contains the video driver for use by the Macintosh
|
||
; OS for the VSC hardware.
|
||
;
|
||
; Written by: Gary Rensberger, based on Mike Puckets SonoraDriver. January 5, 1991.
|
||
;
|
||
; Copyright: © 1991-1993 by Apple Computer, Inc., all rights reserved.
|
||
;
|
||
; Change History (most recent first):
|
||
;
|
||
; <SM2> 12/13/93 PN Roll in KAOs and Horror changes to support Malcom and AJ
|
||
; machines
|
||
; <1> 12-04-92 jmp first checked in
|
||
; ———————————————————————————————————————————————————————————————————————————————————————
|
||
; Pre-SuperMario comments begin here.
|
||
; ———————————————————————————————————————————————————————————————————————————————————————
|
||
; <H9> 7/14/92 djw (HJR) Changed VSCPowerOnPlanes so that it set the VSC Hardware
|
||
; to an initial default state so that if the driver is closed,
|
||
; opening the driver will allow the user to work with the VSC.
|
||
; Actually VSCPowerOnPlanes does a slightly condensed primary
|
||
; init.
|
||
; <H8> 7/13/92 HJR Changed the polarity of PmgrExtVidOn. Moved VSCPowerOnPlanes in
|
||
; the open till after the Monitor is identified.
|
||
; <H7> 7/11/92 HJR Call VSCEnableVGuts/VSCDisableVGuts in VSCLowPwrSelect.
|
||
; <H6> 6/30/92 HJR Install TimeMgr PsuedoVBL when in lower power state so that
|
||
; cursor tasks are updated.
|
||
; <H5> 6/2/92 HJR Set in supervisor mode in VSCInstallBusErrH and VSCRemoveBusErrH
|
||
; before doing priviledged instructions so that VM is happy.
|
||
; <H4> 6/1/92 HJR Added VSCPowerOnPlanes, VSCPowerDownPlanes to Utility routines.
|
||
; Also shutoff power on video close.
|
||
; <H3> 5/19/92 HJR Completely changed how VSCPowerSelect control call operates.
|
||
; Added a new Bus Error handler so that when screen is power
|
||
; down, frame accesses .don't hang the system.
|
||
; <H2> 5/7/92 HJR Added VSCPowerSelect control call to give ability to power
|
||
; off/on the VSC. Provided underlining support for the control
|
||
; call.
|
||
; <1> 4/24/92 HJR first checked in
|
||
; <3> 2/6/92 RLE renamed board ID name to be generic so it works for either
|
||
; Gemini or Deskbar
|
||
; <2> 1/30/92 GMR Changed slot E handler to handle only built-in video.
|
||
; <1> 1/28/92 GMR first checked in
|
||
|
||
;-----------------------------------------------------------------------------------------
|
||
|
||
BLANKS ON
|
||
STRING ASIS
|
||
MACHINE MC68020
|
||
|
||
usingTimeMgr Equ 0 ; If true, we’re using the TimeMgr to simulate VBLs.
|
||
|
||
; This is device storage which is stored in the dCtlStorage field of the AuxDCE.
|
||
|
||
VSCVidPrivates RECORD 0
|
||
saveMMUMode DS.L 1 ; holds old mode when switching to 32 bit mode
|
||
saveScreenBase DS.L 1 ; the screen base address
|
||
saveGammaPtr DS.L 1 ; the pointer to the Gamma correction table
|
||
saveGamDispPtr DS.L 1 ; the pointer to the Gamma block
|
||
saveVidPtr DS.L 1 ; the pointer to the vidParams block
|
||
saveVDACBase DS.L 1 ; the base addr of the VDAC
|
||
saveAIV3Base DS.L 1 ; the base addr of AIV3
|
||
saveVideoBase DS.L 1 ; the base addr of Video regs
|
||
saveVSCConfigParm DS.L 1 ; the config parameters for waking up
|
||
saveBusErrVect DS.L 1 ; the systems current bus error handler
|
||
GFlags DS.W 1 ; flags word (hi-order byte, actually)
|
||
saveMode DS.W 1 ; the current mode setting
|
||
saveMonID DS.W 1 ; monitor type ID
|
||
saveSizeVRAM DS.B 1 ; amount of vRAM (0=512K,1=1024)
|
||
savePowerStatus DS.B 1 ; current state of clocks and power to VSC
|
||
saveParams DS.B 2 ; parameters for the VSC in order to power down and up
|
||
TTask DS.B tmXQSize ; extended time manager task block
|
||
IntDisableFlag DS.W 1 ; this word is non-zero when the VBL interrupt are disabled
|
||
saveSlot Ds.b 1 ; our slot number
|
||
sleepWakeFlag Ds.b 1 ; if true, we doing the sleep/wake call (not dim/undim)
|
||
saveSQElPtr DS.L 1 ; the SQ element pointer (for _SIntRemove)
|
||
VSCVidPrivSize EQU *
|
||
ENDR
|
||
|
||
kVSCVBLTime EQU -16626 ; 60.14742 Hz using the microsecond timer.
|
||
|
||
;-------------------------------------------------------------------
|
||
; Video Driver Header
|
||
;-------------------------------------------------------------------
|
||
;
|
||
VSCVidDrvr
|
||
DC.W $4C00 ; ctl,status,needsLock
|
||
DC.W 0,0,0 ; not an ornament
|
||
|
||
; Entry point offset table
|
||
|
||
DC.W VSCVidOpen-VSCVidDrvr ; open routine
|
||
DC.W VSCVidDrvr-VSCVidDrvr ; no prime in normal video drivers
|
||
DC.W VSCVidCtl-VSCVidDrvr ; control
|
||
DC.W VSCVidStatus-VSCVidDrvr ; status
|
||
DC.W VSCVidClose-VSCVidDrvr ; close
|
||
|
||
STRING Pascal
|
||
VSCVidTitle
|
||
DC.B '.Display_Video_Apple_ViSC'
|
||
|
||
ALIGN 2 ; make sure we're aligned
|
||
DC.W CurVSCDrvrVersion ; current version
|
||
|
||
STRING ASIS
|
||
|
||
;
|
||
; VSCCLUTTbl contains information required to write to the CLUT in the different screen depths.
|
||
; Each depth's information has three values. The first is the number of entries-1 in this depth
|
||
; for range checking. The second is the address of the first active CLUT position for that
|
||
; screen depth. The last number is the “skip” factor. This is required because, in 1-4bpp, the
|
||
; entries are distributed throughout the CLUT address space. As a result, we use sequential CLUT mode
|
||
; ONLY in 8/16bpp modes. The skip factor is the address difference between adjacent active positions
|
||
; in each mode.
|
||
;
|
||
; Generally, these rules are true for any particular depth:
|
||
; #entries = (2^^depth)-1
|
||
; startposition = (256 / (2^^depth))-1
|
||
; skipfactor = 256 / (2^^depth)
|
||
|
||
VSCCLUTTbl
|
||
DC.B $01,$7F,$00,$80 ; for one-bit mode
|
||
DC.B $03,$3F,$00,$40 ; for two-bit mode
|
||
DC.B $0F,$0F,$00,$10 ; for four-bit mode
|
||
DC.B $FF,$00,$00,$01 ; for eight-bit mode
|
||
DC.B $1F,$00,$00,$01 ; for sixteen-bit mode
|
||
|
||
VSCCLUTRec RECORD 0 ;
|
||
scRange DS.B 1 ; maximum index value in this depth
|
||
scStart DS.B 1 ; lowest active CLUT address
|
||
scSkip DS.W 1 ; skip value between active addresses
|
||
VSCCLUTSize Equ *
|
||
ENDR
|
||
|
||
;
|
||
; These are the bit patterns for grays in each depth
|
||
;
|
||
VSCPats Dc.l OneBitGray,TwoBitGray,FourBitGray,EightBitGray,SixteenBitGray
|
||
|
||
;
|
||
; The following tables are used to support the Get/SetAltSense codes. The first set of
|
||
; tables are pairs of codes and indices, terminated by a -1. Each of these tables
|
||
; is composed of a particular sense-code types (i.e., 3, 5, 6, and 7). The final
|
||
; table is also composed of pairs -- the first value is the sense-code type, and
|
||
; the corresponding second value is an offset to the sense-code index tables.
|
||
;
|
||
|
||
VSCType_0_MonIDs
|
||
Dc.b indexedSenseFP, indexedSenseFP
|
||
Dc.b indexedSenseRubik, indexedSenseRubik
|
||
Dc.b indexedSenseRGBFP, indexedSenseRGBFP
|
||
Dc.b indexedSenseHR, indexedSenseHR
|
||
Dc.b indexedNoConnect, indexedNoConnect
|
||
Dc.w -1
|
||
|
||
VSCType_3_MonIDs
|
||
Dc.w -1
|
||
|
||
VSCType_6_MonIDs
|
||
Dc.b extendedMSB1, indexedSenseMSB1
|
||
Dc.b extendedMSB2, indexedSenseMSB2
|
||
Dc.b extendedMSB3, indexedSenseMSB3
|
||
Dc.w -1
|
||
|
||
VSCType_7_MonIDs
|
||
Dc.b extendedSenseVGA, indexedSenseVGA
|
||
Dc.b extendedSenseGF, indexedSenseGF
|
||
Dc.b extendedNoConnect, indexedNoConnect
|
||
Dc.w -1
|
||
|
||
VSCMonIDsTbl Dc.w 0, VSCType_0_MonIDs-VSCMonIDsTbl
|
||
Dc.w 3, 0
|
||
Dc.w 5, 0
|
||
Dc.w 6, VSCType_6_MonIDs-VSCMonIDsTbl
|
||
Dc.w 7, VSCType_7_MonIDs-VSCMonIDsTbl
|
||
Dc.w -1
|
||
|
||
;
|
||
; The following table is a list of CPUFlags and handler offsets to the type
|
||
; of bus errors this code currently handles.
|
||
;
|
||
|
||
VSCValidCPUs
|
||
Dc.w cpu68020, VSCBusErrHandler030-VSCValidCPUs
|
||
Dc.w cpu68030, VSCBusErrHandler030-VSCValidCPUs
|
||
Dc.w cpu68040, VSCBusErrHandler040-VSCValidCPUs
|
||
Dc.w -1
|
||
|
||
; The following table is used by the SwitchMode call to determine two things. First,
|
||
; it must decide whether the requested mode to switch to is valid or not. If
|
||
; the requested mode is not in the SwitchTable, the call will fail. Also, even
|
||
; if the requested mode is in table, if the current bit depth is too large
|
||
; for the requested mode, SwitchMode must still fail.
|
||
;
|
||
|
||
SwitchTable
|
||
Dc.b sRsrc_Vid_VSC_FPa, ThirdVidMode ; Full-Page Display
|
||
Dc.b sRsrc_Vid_VSC_FPb, FourthVidMode
|
||
|
||
Dc.b sRsrc_Vid_VSC_RGBFPa, ThirdVidMode ; RGB Full-Page
|
||
Dc.b sRsrc_Vid_VSC_RGBFPb, FourthVidMode
|
||
|
||
Dc.b sRsrc_Vid_VSC_VGA, FourthVidMode ; VGA
|
||
Dc.b sRsrc_Vid_VSC_SVGA, FourthVidMode ;
|
||
|
||
Dc.b sRsrc_Vid_VSC_MSB1, FourthVidMode ; MSB1
|
||
Dc.b sRsrc_Vid_VSC_GS, FourthVidMode ;
|
||
Dc.b sRsrc_Vid_VSC_GF, FourthVidMode ;
|
||
|
||
Dc.b sRsrc_Vid_VSC_MSB2, FourthVidMode ; MSB1/MSB2
|
||
Dc.b sRsrc_Vid_VSC_HR, FourthVidMode ;
|
||
Dc.b sRsrc_Vid_VSC_1K, ThirdVidMode ;
|
||
|
||
Dc.b 0,0 ; End
|
||
|
||
; The following table is used by the GetConnection call to fill out the appropriate
|
||
; information for the Display Manager per on a display-by-display basis.
|
||
;
|
||
|
||
ConnectEntrySz Equ 8 ; Size of ConnectTable Entry.
|
||
VSCConnectTable
|
||
Dc.w indexedSenseFP ; Full-Page Display
|
||
Dc.w kFullPageConnect
|
||
Dc.l (1<<kAllModesValid)|(1<<kAllModesSafe)|\
|
||
(1<<kIsMonoDev)
|
||
|
||
Dc.w indexedSenseRGBFP ; RGB Full-Page
|
||
Dc.w kFullPageConnect
|
||
Dc.l (1<<kAllModesValid)|(1<<kAllModesSafe)
|
||
|
||
Dc.w indexedSenseVGA ; VGA
|
||
Dc.w kVGAConnect
|
||
Dc.l (1<<KAllModesValid)
|
||
|
||
Dc.w indexedSenseMSB1 ; MSB1
|
||
Dc.w kMultiModeCRT1Connect
|
||
Dc.l (1<<KAllModesValid)
|
||
|
||
Dc.w indexedSenseMSB2 ; MSB2
|
||
Dc.w kMultiModeCRT2Connect
|
||
Dc.l (1<<KAllModesValid)
|
||
|
||
Dc.w indexedSenseMSB3 ; MSB3
|
||
Dc.w kMultiModeCRT3Connect
|
||
Dc.l (1<<KAllModesValid)
|
||
|
||
Dc.w -1 ; End
|
||
|
||
VSCDfltConnect Dc.w kFixedModeCRTConnect ; For everyone else.
|
||
Dc.l (1<<KAllModesValid)
|
||
|
||
**********************************************************************
|
||
*
|
||
* VidOpen allocates private storage for the device in the AuxDCE and locks
|
||
* it down for perpetuity. Also, it installs the interrupt handler and enables
|
||
* the (VBL) interrupts.
|
||
*
|
||
* Entry: A0 = param block pointer
|
||
* A1 = AuxDCE pointer
|
||
*
|
||
* Locals: A3 = pointer to private storage
|
||
*
|
||
* A4/D2/D3 used as scratch
|
||
*
|
||
**********************************************************************
|
||
|
||
WITH VDPageInfo,SlotIntQElement,VSCVidPrivates
|
||
VSCVidOpen
|
||
;
|
||
; Allocate private storage (since block is CLEAR, GFlags are zeroed) and get
|
||
; a pointer to it in A3
|
||
;
|
||
MOVEQ #VSCVidPrivSize,D0 ; get size of parameters
|
||
_ResrvMem ,SYS ; make room as low as possible
|
||
MOVEQ #VSCVidPrivSize,D0 ; get size of parameters
|
||
_NewHandle ,SYS,CLEAR ; get some memory for private storage
|
||
BNE @OpError1 ; => return an error in open
|
||
MOVE.L A0,dCtlStorage(A1) ; save returned handle in AuxDCE
|
||
_HLock ; and lock it down forever
|
||
|
||
MOVE.L (A0),D0 ; get a pointer to it
|
||
_StripAddress ; clean it up
|
||
MOVE.L D0,A3 ; get pointer to privates in A3
|
||
|
||
;
|
||
; Remember the VDAC, VSC, and framebuffer base addresses since they're non-trivial to
|
||
; look up. (Unless, of course, you just hard-code them like what has been done
|
||
; here :-)
|
||
;
|
||
move.l #VDACBase,saveVDACBase(A3) ; save VDAC’s base address
|
||
move.l #AIV3Base,saveAIV3Base(A3) ; save VSC’s VIA base address
|
||
move.l #VSCVideoBase,saveVideoBase(A3) ; save VSC’s Video Registers base address
|
||
move.l #VRAMBase,saveScreenBase(A3) ; save VRAM base address too
|
||
|
||
;
|
||
; Get and install the interrupt handler. Call the EnableVGuts utility code to do
|
||
; this. This utility also starts the interrupts going. If there is an error
|
||
; condition, EnableVGuts returns with the Z-bit cleared.
|
||
|
||
If usingTimeMgr Then
|
||
LEA VSCTimeMgrIH,A0 ; get a pointer to the interrupt simulation timer task code
|
||
MOVE.L A0,tmAddr+TTask(A3) ; put it in the time task
|
||
LEA TTask(A3),A0 ; get a pointer to the timer queue element
|
||
Move.l #'eada',(A0) ; Put in the magic signature to prevent VM from deferring us.
|
||
_InsXTime ; Install the task (fixed frequency).
|
||
Else
|
||
MOVEQ #sqHDSize,D0 ; allocate a slot queue element
|
||
_NewPtr ,SYS,CLEAR ; get it from system heap cleared
|
||
BNE @OpError2 ; if not allocated, return bad
|
||
MOVE.L A0,saveSQElPtr(A3) ; save the SQ element pointer.
|
||
Endif
|
||
Move.b dCtlSlot(A1),saveSlot(A3) ; Remember our slot number.
|
||
|
||
Bsr VSCEnableVGuts ; do it
|
||
Bne @OpError2 ;
|
||
;
|
||
; Load the default gamma table from the slot resource list.
|
||
;
|
||
WITH SpBlock
|
||
|
||
SUBA #spBlockSize,SP ; make a slot parameter block
|
||
MOVE.L SP,A0 ; get pointer to block in A0
|
||
MOVE.B dCtlSlot(A1),spSlot(A0) ; copy the slot number
|
||
MOVE.B dCtlSlotId(A1),spID(A0) ; copy the spID of the video sRsrc
|
||
CLR.B spExtDev(A0) ;
|
||
_sRsrcInfo ; get the spsPointer
|
||
BNE @OpError3 ; if failed, then quit.
|
||
|
||
MOVE.B #sGammaDir,spID(A0) ; look for the gamma directory
|
||
_sFindStruct ; get that baby
|
||
BNE.S @DoLinear ; if failed, then do linear
|
||
|
||
MOVE.B #128,spID(A0) ; get the default gamma table, (always 128)
|
||
_sGetBlock ; we can use this since we want it on the sys heap
|
||
BNE.S @DoLinear ; if failed, then do linear
|
||
|
||
; Skip over gamma header.
|
||
|
||
MOVE.L spResult(A0),A0 ; point to head of the block
|
||
MOVE.L A0,saveGamDispPtr(A3) ; save the ptr to the gamma block
|
||
ADDA #2,A0 ; skip resID
|
||
@Name TST.B (A0)+ ; skip over gamma name
|
||
BNE.S @Name ;
|
||
MOVE.L A0,D0 ; get in d-reg
|
||
ADDQ #1,D0 ; word align pointer
|
||
BCLR #0,D0 ; round it off
|
||
|
||
MOVE.L D0,saveGammaPtr(A3) ; put it in private storage
|
||
Bra.s @VidParams ; Jump around linear code.
|
||
|
||
;
|
||
; Build a linear default gamma table if necessary.
|
||
;
|
||
|
||
@DoLinear
|
||
Moveq #gFormulaData,D0 ; Get gamma table header size.
|
||
Add #256,D0 ; Add in one-byte per entry.
|
||
_NewPtr ,SYS,CLEAR ; Clear it.
|
||
Bne @OpError3 ; If failed, quit.
|
||
|
||
Move.l A0,saveGamDispPtr(A3) ; Save head of gamma table for disposal.
|
||
Move.l A0,saveGammaPtr(A3) ; Head and top are same here.
|
||
Move.w #drHwVSC,gType(A0) ; Set up gType.
|
||
Move.w #1,gChanCnt(A0) ; Set up gChanCnt.
|
||
Move.w #256,gDataCnt(A0) ; Set up gDataCnt.
|
||
Move.w #8,gDataWidth(A0) ; Set up gDataWidth.
|
||
Adda #gFormulaData+256,A0 ; Point to end of data table.
|
||
Move.w #255,D0 ; Set up loop counter.
|
||
@Loop Move.b D0,-(A0) ; Write out value.
|
||
Dbra D0,@Loop ; Loop.
|
||
|
||
;
|
||
; Get a pointer to the video hardware setup parameter block. Use this functional spID's spsPointer
|
||
; found above in the gamma section.
|
||
;
|
||
|
||
@VidParams
|
||
Move.l Sp,A0 ; Point to the spBlock on the stack.
|
||
Move.b dCtlSlot(A1),spSlot(A0) ; Get the slot number.
|
||
Move.b #sRsrc_Board,spID(A0) ; Get the appropriate board sRsrc ID.
|
||
Clr.b spExtDev(A0) ;
|
||
_sRsrcInfo ; Get the spsPointer.
|
||
Bne @OpError4 ; If failed, quit.
|
||
|
||
MOVE.B #sVidParmDir,spID(A0) ; look for the video parameters dir
|
||
_sFindStruct ; Try to load it.
|
||
Bne @OpError4 ; If failed, quit.
|
||
|
||
MOVE.B dCtlSlotId(A1),spID(A0) ; look in the directory for this config's parameters
|
||
_sGetBlock ; Try to load it.
|
||
Bne @OpError4 ; If failed, quit.
|
||
|
||
MOVE.L spResult(A0),saveVidPtr(A3) ; get pointer to it
|
||
;
|
||
; At PrimaryInit time, we used the sense lines to determine the type of attached display. For extended
|
||
; sense displays, we just mapped them to the end of indexed-sense displays. Since the gamma-correction
|
||
; code uses the monitor ID to determine if the passed-in table is applicable, we need to know the “real”
|
||
; monitor ID. At PrimaryInit time, we store the real monitor ID in slot pRAM. So, we extract that
|
||
; information out here. Also, it should be noted that it would actually be inappropriate for us
|
||
; to re-read the sense-lines now, in that someone could potentially change/unplug the attached
|
||
; display between PrimaryInit and VidOpen, and that would cause us all sorts of havoc.
|
||
;
|
||
With SP_Params
|
||
|
||
Move.l Sp,A0 ; Point to spBlock on the stack.
|
||
Move.b dCtlSlot(A1),spSlot(A0) ; Put slot into spBlock.
|
||
|
||
Suba #sizeSPRamRec,Sp ; Allocate an SPRam block on the stack.
|
||
Move.l Sp,spResult(A0) ; Point to it.
|
||
_SReadPRAMRec ; Read Slot PRam.
|
||
Bne @OpError5 ; If failed quit.
|
||
|
||
Moveq #0,D2 ; Clear D2.w.
|
||
Move.b SP_MonID(Sp),D2 ; Get the monID (it’s byte sized).
|
||
Move.b SP_Flags(Sp),D1 ; Get the vRAM size.
|
||
|
||
Adda #sizeSPRamRec+spBlockSize,Sp ; Clean up the stack.
|
||
|
||
;
|
||
; Do a little bookkeeping…
|
||
;
|
||
|
||
Move.w D2,saveMonID(A3) ; Save the monID for later.
|
||
|
||
Bfextu D1{spVRamBits:numSPVRamBits},D1 ; Extract the vRAM size from the flags byte…
|
||
Move.b D1,saveSizeVRAM(A3) ; …and save it for later.
|
||
|
||
Endwith
|
||
|
||
;
|
||
; Set GFlags to reflect monochrome-only displays.
|
||
;
|
||
|
||
Cmp.w #indexedSenseFP,saveMonID(A3) ; If this is a Mono-Only Full Page,
|
||
Beq.s @SetMonoFlags ; then say so.
|
||
Bra.s @AllDone ; Otherwise, skip.
|
||
|
||
@SetMonoFlags Bset #IsMono,GFlags(A3) ; Turn on the IsMono and
|
||
Bset #GrayFlag,GFlags(A3) ; GrayFlag flags.
|
||
|
||
;
|
||
; All done!
|
||
;
|
||
|
||
@AllDone MOVEQ #noErr,D0 ; no error
|
||
@EndOpen RTS ; return
|
||
|
||
@OpError5
|
||
Adda #sizeSPRamRec,Sp ; Release the SPRam block.
|
||
@OpError4
|
||
Move.l saveGamDispPtr(A3),A0 ; Set up to dispose of gamma table.
|
||
_DisposPtr ; Dispose it.
|
||
@OpError3
|
||
ADDA #spBlockSize,SP ; release the spBlock
|
||
@OpError2
|
||
MOVE.L dCtlStorage(A1),A0 ; get the private storage back
|
||
_DisposHandle ; release the driver private storage
|
||
@OpError1
|
||
MOVE.L #OpenErr,D0 ; say can't open driver
|
||
BRA.S @EndOpen
|
||
|
||
ENDWITH
|
||
|
||
**********************************************************************
|
||
*
|
||
* Video Driver Control Call Handler. There are 11 standard calls:
|
||
*
|
||
* ($00) Reset (VAR mode, page: INTEGER; VAR BaseAddr: Ptr);
|
||
* ($01) KillIO
|
||
* ($02) SetMode(mode, page: INTEGER; VAR BaseAddr: Ptr);
|
||
* ($03) SetEntries (Table: Ptr; Start,Count : integer );
|
||
* ($04) SetGamma (Table : Ptr );
|
||
* ($05) GrayPage (page);
|
||
* ($06) SetGray (csMode = 0 for color, 1 for gray)
|
||
* ($07) SetInterrupt (csMode = 0 for enable, non-zero for disable);
|
||
* ($08) DirectSetEntries (Table: Ptr; Start,Count : integer );
|
||
* ($09) SetDefaultMode (csMode = mode to set);
|
||
* ($0A) SwitchMode(csMode, csData, csPage, csBaseAddr);
|
||
*
|
||
* The following calls are VSC-specific:
|
||
*
|
||
* ($83) SetAltSense(csMode = monitor ID to set)
|
||
* ($84) PowerSelect(csMode = 0 for powerup, non-zero for powerdown);
|
||
*
|
||
* Entry: A0 = param block pointer
|
||
* A1 = AuxDCE pointer
|
||
* Uses: A2 = cs parameters (ie. A2 <- csParam(A0)) (must be preserved)
|
||
* A3 = ptr to our privates/scrarch (doesn’t need to be preserved)
|
||
* A4 = scratch (must be preserved)
|
||
* D0-D3 = scratch (don't need to be preserved)
|
||
*
|
||
* Exit: D0 = error code
|
||
*
|
||
**********************************************************************
|
||
|
||
;
|
||
; Decode the call…
|
||
;
|
||
VSCVidCtl
|
||
MOVEM.L A0/A1,-(SP) ; Save exit registers.
|
||
|
||
MOVE.L csParam(A0),A2 ; A2 <- Ptr to control parameters
|
||
|
||
MOVE.L dCtlStorage(A1),A3 ; A3 <- Ptr to private storage
|
||
MOVE.L (A3),D0 ;
|
||
_StripAddress ;
|
||
MOVE.L D0,A3 ;
|
||
|
||
MOVE.W csCode(A0),D0 ; get routine selector
|
||
|
||
Cmpi.w #cscSleepWake,D0 ; If we got the sleep-wake call,
|
||
Beq VSCSleepWake ; then hop to it.
|
||
CMP.W #cscPowerSelect,D0 ; If we got the Power Select
|
||
BEQ VSCLowPwrSelect ; do it
|
||
TST.B savePowerStatus(a3) ; IF not powered up THEN
|
||
BNE.S VSCCtlBad ; exit (make no control calls, dammit!)
|
||
|
||
CMP.W #$0A,D0 ; IF csCode NOT IN [0..A] THEN
|
||
BHI.S VSCCtlNextRange ; maybe next range?
|
||
|
||
MOVE.W VSCCtlJumpTbl(PC,D0.W*2),D0 ; Get the relative offset to the routine.
|
||
JMP VSCCtlJumpTbl(PC,D0.W) ; GOTO the proper routine.
|
||
|
||
VSCCtlJumpTbl
|
||
DC.W VSCVidReset-VSCCtlJumpTbl ; $00 => VidReset
|
||
DC.W VSCCtlGood-VSCCtlJumpTbl ; $01 => CtlGood (no async routines here)
|
||
DC.W VSCSetVidMode-VSCCtlJumpTbl ; $02 => SetVidMode
|
||
DC.W VSCSetEntries-VSCCtlJumpTbl ; $03 => SetEntries
|
||
DC.W VSCSetGamma-VSCCtlJumpTbl ; $04 => SetGamma
|
||
DC.W VSCGrayPage-VSCCtlJumpTbl ; $05 => GrayPage
|
||
DC.W VSCSetGray-VSCCtlJumpTbl ; $06 => SetGray
|
||
DC.W VSCSetInterrupt-VSCCtlJumpTbl ; $07 => SetInterrupt
|
||
DC.W VSCDirectSetEntries-VSCCtlJumpTbl ; $08 => DirectSetEntries
|
||
DC.W VSCSetDefaultMode-VSCCtlJumpTbl ; $09 => SetDefaultMode
|
||
Dc.w VSCSwitchMode-VSCCtlJumpTbl ; $0A => SwitchMode
|
||
|
||
VSCCtlNextRange
|
||
CMP.W #cscAltSense,D0 ; If we got the AltSense call,
|
||
BEQ VSCSetAltSense ; hop to it.
|
||
|
||
VSCCtlBad MOVEQ #controlErr,D0 ; else say we don't do this one
|
||
BRA.S VSCCtlDone ; and return
|
||
|
||
VSCCtlGood MOVEQ #noErr,D0 ; return no error
|
||
|
||
VSCCtlDone MOVEM.L (SP)+,A0/A1 ; Restore Exit registers.
|
||
BRA VSCExitDrvr
|
||
|
||
VSCVidReset
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Reset the card to its default
|
||
;
|
||
;---------------------------------------------------------------------
|
||
|
||
WITH VSCVidPrivates
|
||
|
||
MOVE #FirstVidMode,csMode(A2) ; return default mode
|
||
MOVE #FirstVidMode,saveMode(A3) ; remember FirstVidMode as the requested mode
|
||
MOVEQ #0,D1 ; get default depth in D1 (#firstVidMode-#firstVidMode)
|
||
MOVEQ #0,D0 ; get page in D0
|
||
MOVE D0,csPage(A2) ; return the page
|
||
|
||
BSR VSCSetDepth ; set the depth from D1
|
||
|
||
BCLR #IsDirect,GFlags(A3) ; turn off direct mode bit
|
||
Move.l saveScreenBase(A3),csBaseAddr(A2) ; return the base address
|
||
BSR VSCGrayScreen ; paint the screen gray
|
||
BRA.S VSCCtlGood ; => no error
|
||
|
||
ENDWITH
|
||
|
||
VSCSetVidMode
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Set the card to the specified mode. Only page zero is possible,
|
||
; so we need to check that the request was OK.
|
||
;
|
||
; If the card is already set to the specified mode, then do nothing.
|
||
;
|
||
; A1 = Ptr to AuxDCE
|
||
; A2 = Ptr to cs parameter record
|
||
; A3 = Ptr to driver privates
|
||
;
|
||
;---------------------------------------------------------------------
|
||
|
||
WITH VSCVidPrivates
|
||
|
||
MOVE.W csMode(A2),D1 ; D1 = mode
|
||
BSR VSCChkMode ; check mode and convert
|
||
BNE.S VSCCtlBad ; => not a valid mode
|
||
|
||
TST.W csPage(A2) ; only page zero is valid
|
||
BNE.S VSCCtlBad ; => not a valid page
|
||
|
||
; Only set if mode has changed.
|
||
|
||
VSCSetVidModeGuts
|
||
|
||
MOVE.W csMode(A2),D2 ; get the mode spID (D1 has the zero-based mode)
|
||
CMP saveMode(A3),D2 ; has the mode changed?
|
||
BEQ @ModeOK1 ; if not, then skip graying
|
||
|
||
; Remember the newly requested mode.
|
||
|
||
MOVE.W D2,saveMode(A3) ; remember requested mode
|
||
|
||
; Set the entire color table to gray before switching to avoid screen anomalies.
|
||
|
||
Movem.l A4-A6,-(Sp) ; Save gamma-table registers.
|
||
|
||
Move.l saveGammaPtr(A3),A0 ; Get pointer to gamma data structure.
|
||
Lea gFormulaData(A0),A4 ; Point to first gamma table.
|
||
Adda.w gFormulaSize(A0),A4 ;
|
||
Move.l A4,A5 ; Point to green data (assuming gChanCnt = 1).
|
||
Move.l A4,A6 ; Point to red data (assuming gChanCnt = 1).
|
||
|
||
Cmp.w #1,gChanCnt(A0) ; If there’s only one table,
|
||
Beq.s @OnlyOneTable ; then we’re set.
|
||
|
||
Move.w gDataWidth(A0),D2 ; Get width of each entry (in bits).
|
||
Move.w gDataCnt(A0),D0 ; Get # of entries in table.
|
||
Addq #7,D2 ; Round to nearest byte.
|
||
Lsr.w #3,D2 ; Get bytes per entry.
|
||
Mulu D2,D0 ; Get size of table in bytes.
|
||
|
||
Adda.w D0,A5 ; Calc base of green (red base + D0).
|
||
Adda.w D0,A6 ; Calc base…
|
||
Adda.w D0,A6 ; …of blue (red base + D0 + D0).
|
||
|
||
@OnlyOneTable
|
||
|
||
Move.w gDataCnt(A0),D3 ; Save number of gamma entries.
|
||
|
||
MOVE.L saveVDACBase(A3),A0 ; get the VDAC base addr
|
||
ADDA #ArielDataReg,A0 ; point to data register
|
||
CLR.B ArielAddrReg-ArielDataReg(A0) ; start at the beginning of CLUT
|
||
|
||
MOVE.W SR,-(SP) ; preserve the status register
|
||
BSR VSCWaitVSync ; wait for next blanking period (preserves A0)
|
||
|
||
; Write out gamma-corrected true-gray CLUT…
|
||
;
|
||
Move.w D3,D0 ; Init loop counter.
|
||
Subq #1,D0 ; Zero base it.
|
||
|
||
Move.w GFlags(A3),D2 ; Get the GFlags into a convenient register.
|
||
Lsr.w #1,D3 ; Get midpoint of table(s).
|
||
|
||
@Repeat Btst #IsMono,D2 ; If this is not a mono-only display
|
||
Beq.s @DoRGB ; then do the standard RGB stuff.
|
||
Clr.b (A0) ; Otherwise, just write black out
|
||
_CLUTDelay ;
|
||
Clr.b (A0) ; to the red & green channels.
|
||
_CLUTDelay ;
|
||
Bra.s @DoMono ;
|
||
|
||
@DoRGB Move.b (A4,D3),(A0) ; Write: red,
|
||
_CLUTDelay ;
|
||
Move.b (A5,D3),(A0) ; green,
|
||
_CLUTDelay ;
|
||
@DoMono Move.b (A6,D3),(A0) ; blue.
|
||
_CLUTDelay ;
|
||
Dbra D0,@Repeat
|
||
|
||
MOVE (SP)+,SR ; restore the status reg
|
||
|
||
Movem.l (Sp)+,A4-A6 ; Restore gamma-table registers.
|
||
BSR VSCSetDepth ; set the depth from D1
|
||
|
||
|
||
; Finish up the bookkeeping.
|
||
|
||
CMP.W #FifthVidMode,saveMode(A3) ; was it a direct mode?
|
||
BLT.S @BitOff ; no, so turn flag off
|
||
|
||
BSET #IsDirect,GFlags(A3) ; turn on bit
|
||
BRA.S @ModeOK1 ;
|
||
@BitOff
|
||
BCLR #IsDirect,GFlags(A3) ; turn off bit
|
||
|
||
@ModeOK1 Move.l saveScreenBase(A3),csBaseAddr(A2) ; return the base addr
|
||
BRA VSCCtlGood ; return no error
|
||
|
||
ENDWITH
|
||
|
||
VSCSetEntries
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Input :
|
||
; csParam -> datablock
|
||
; datablock = csTable -> table of colorSpecs (not colortable)
|
||
; csStart -> where to start setting, or -1
|
||
; csCount -> # of entries to change
|
||
;
|
||
; This call has two modes. In SEQUENCE mode, csCount entries are changed
|
||
; in the CLUT, starting at csStart. In INDEX mode, csCount entries are
|
||
; installed into the CLUT at the positions specified by their .value fields.
|
||
; This mode is selected by passing csStart = -1. In both cases, entries are
|
||
; range-checked to the dynamic range of the video mode (bits/pixel).
|
||
;
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Set the CLUT
|
||
; A0 = Ptr to the table
|
||
; A1 = Ptr to AuxDCE
|
||
; A2 = Ptr to cs parameter record
|
||
; A3 = Ptr to private data, later to CLUT constants table
|
||
; A4 = Ptr to gamma red table
|
||
; A5 = Ptr to gamma green table
|
||
; A6 = Ptr to gamma blue table
|
||
;
|
||
; D0-D3 = Scratch
|
||
; D4 = Size of stack color table buffer
|
||
; D5 = GFlags word
|
||
; D6 = Index range [0..n]
|
||
; D7 = gamma channel size in bits
|
||
;
|
||
;---------------------------------------------------------------------
|
||
|
||
; Initialize loop.
|
||
|
||
WITH VSCVidPrivates,VSCCLUTRec
|
||
|
||
BTST #IsDirect,GFlags(A3) ; are we in a direct mode?
|
||
BNE.S VSCCtlBad ; error if so
|
||
|
||
VSCSEGuts
|
||
TST.L csTable(A2) ; Check for a nil pointer
|
||
BEQ VSCCtlBad ;
|
||
|
||
MOVEM.L A1/A4-A6/D4-D7,-(SP) ; save registers for gamma
|
||
|
||
MOVE.W GFlags(A3),D5 ; get GFlags word in D5
|
||
|
||
CMP.W #indexEntries,csStart(A2) ; was it indexed mode?
|
||
BEQ.S @SkipSeq ; if so, then leave bit off (it's never turned on in GFlags)
|
||
Bset #PsuedoIndex,D5 ; turn on the bit that denotes a seq write that was xlated to indexed
|
||
Cmp.w #FourthVidMode,saveMode(A3) ; If it’s not 8bbp or 16bpp
|
||
Blt.s @SkipSeq ; need to use “indexed”.
|
||
BSET #UseSeq,D5 ; otherwise, turn on sequential mode bit
|
||
@SkipSeq
|
||
MOVE.L saveGammaPtr(A3),A0 ; get pointer to gamma data structure
|
||
MOVE.W gFormulaSize(A0),D0 ; get the size of formula data
|
||
LEA gFormulaData(A0,D0),A4 ; red correction table starts here
|
||
MOVE.L A4,A5 ; get default pointer to green data
|
||
MOVE.L A4,A6 ; get default pointer to blue data
|
||
MOVE gDataWidth(A0),D7 ; get width of each entry in bits
|
||
CMP #1,gChanCnt(A0) ; if only only one table, we're set
|
||
BEQ.S @OneTbl ; => just one table
|
||
|
||
MOVE gDataCnt(A0),D0 ; get # entries in table
|
||
MOVE D7,D1 ; copy it to goof around
|
||
ADDQ #7,D1 ; round to nearest byte
|
||
LSR #3,D1 ; get bytes per entry
|
||
MULU D1,D0 ; get size of table in bytes
|
||
|
||
ADDA D0,A5 ; calc base of green
|
||
ADDA D0,A6 ; calc base of blue
|
||
ADDA D0,A6 ; calc base of blue
|
||
|
||
@OneTbl
|
||
|
||
;
|
||
; Get the maximum number of entries, zero based from a convenient table.
|
||
;
|
||
|
||
MOVE.W saveMode(A3),D1 ; get the current video mode
|
||
SUB.W #FirstVidMode,D1 ; convert to a index
|
||
|
||
Moveq #0,D6 ; clear all of D6 for .w compare.
|
||
Lea VSCCLUTTbl,A0 ; Point to the table of CLUT data.
|
||
Lea (A0,D1*VSCCLUTSize),A0 ; Point to the right entry.
|
||
Move.b scRange(A0),D4 ; Get the range.
|
||
|
||
;
|
||
; Allocate a temporary color table on the stack. We'll pre-process all the entries that will
|
||
; change here so we can hit the hardware as quickly as possible.
|
||
;
|
||
|
||
Move.w csCount(A2),D3 ; Get the number of entries to change,
|
||
Bmi VSCSEBadExit ; and hike if it’s out of range.
|
||
Cmp.w D4,D3 ; If D3-D4 > 0 (count - range > 0),
|
||
Bhi VSCSEBadExit ; then hike.
|
||
Tst.w csStart(A2) ; If we’re doing indexed entries (-1),
|
||
Bmi.s @skipStartChk ; then just go on.
|
||
Add.w csStart(A2),D3 ; Adjust count for starting position.
|
||
Cmp.w D4,D3 ; If D3-D4 > 0 (count - range > 0),
|
||
Bhi VSCSEBadExit ; then hike.
|
||
Move.w csCount(A2),D3 ; Otherwise, re-get the count.
|
||
|
||
@skipStartChk
|
||
|
||
Move.l D3,D4 ; Make a copy of the table size (zero-based).
|
||
Addq #1,D4 ; Make it a counting number.
|
||
Btst #UseSeq,D5 ; If we’re not in sequential mode,
|
||
Beq.s @IsIndex ; then do the indexed stuff.
|
||
Mulu #3,D4 ; Make room for just R,G,B in sequential mode.
|
||
Bra.s @AllocIt ; And continue.
|
||
@IsIndex Asl.w #2,D4 ; Make room for i,R,G,B in indexed mode.
|
||
@AllocIt Sub.w D4,Sp ; Allocate the table on the stack.
|
||
|
||
;
|
||
; Construct the stack version of the color table. It looks like a color table, but each of the
|
||
; components is only eight bits (rather than 16).
|
||
;
|
||
|
||
Move.l A3,D6 ; We’re about to torch A3, so save it for later.
|
||
Move.l A0,A3 ; Save the CLUT table entry pointer.
|
||
|
||
MOVE.L SP,A0 ; copy the stack buffer pointer
|
||
MOVE.L csTable(A2),A1 ; get colorSpec pointer into A1
|
||
|
||
; Death! Totally out of registers in this routine, so I'm using the top half of D4 (the temp buffer
|
||
; size) as the sequence counter used in most video modes to translate sequential requests into
|
||
; the indexed write that the hardware needs.
|
||
|
||
SWAP D4 ; flip the buffer size to the top half
|
||
MOVE.W csStart(A2),D4 ; pick up the sequential start position. It might
|
||
; be -1 on a true indexed write, but we won't
|
||
; use it below if it is.
|
||
;
|
||
; Write the index if in indexed mode. If in sequential (8/16) mode, blow it off completely,
|
||
; since it won't be needed.
|
||
|
||
@SetupLoop
|
||
MOVE.W (A1)+,D0 ; get index
|
||
|
||
BTST #UseSeq,D5 ; is it sequence mode?
|
||
BNE.S @SLSeq ; yup, so go there
|
||
|
||
Btst #PsuedoIndex,D5 ; If we are doing an “indexed” mode,
|
||
Beq.s @IndexPresent ; then go there now.
|
||
|
||
; This case is a sequential request in a screen depth that does not allow sequential CLUT writes
|
||
; (any non-8/16 bit mode). In this case, we substitute the sequence counter for D0 on each
|
||
; entry.
|
||
|
||
Move.w D4,D0 ; Copy the sequence counter to D0.
|
||
Addq #1,D4 ; Increment it.
|
||
|
||
@IndexPresent Mulu.w scSkip(A3),D0 ; Calculate the new position at this depth.
|
||
Add.b scStart(A3),D0 ; Add in the first entry offset.
|
||
Move.b D0,(A0)+ ; Write out this index.
|
||
|
||
@SLSeq
|
||
MOVE.W (A1)+,D0 ; get red
|
||
MOVE.W (A1)+,D1 ; get green
|
||
MOVE.W (A1)+,D2 ; get blue
|
||
|
||
TST D5 ; test hi bit of the flags
|
||
BPL.S @NoGray ; if not set, don't luminence map
|
||
|
||
BTST #IsDirect,D5 ; test for direct mode as well
|
||
BNE.S @NoGray ; don't allow luminence mapping in direct mode
|
||
|
||
; We're luminence mapping here.
|
||
|
||
MULU #$4CCC,D0 ; multiply by red weight (0.30)
|
||
MULU #$970A,D1 ; multiply by green weight (0.59)
|
||
MULU #$1C29,D2 ; multiply by blue weight (0.11)
|
||
ADD.L D1,D0 ; sum red and green
|
||
ADD.L D2,D0 ; blue also
|
||
BFEXTU D0{0:D7},D0 ; get gChanWidth bits for gamma table lookup
|
||
MOVE.W D0,D1 ; copy into green register
|
||
MOVE.W D0,D2 ; copy into blue register
|
||
|
||
BRA.S @WriteSP ; go on and write it in the stack buffer
|
||
|
||
@NoGray
|
||
BFEXTU D0{16:D7},D0 ; get gChanWidth bits of red
|
||
BFEXTU D1{16:D7},D1 ; get gChanWidth bits of green
|
||
BFEXTU D2{16:D7},D2 ; get gChanWidth bits of blue
|
||
|
||
@WriteSP
|
||
BTST #IsMono,D5 ; if monochrome display, write black to red & green
|
||
BEQ.S @Brighter ; if not, then set all three channels
|
||
CLR.B (A0)+ ; write black for red
|
||
CLR.B (A0)+ ; and green
|
||
BRA.S @Looper ; write out normal blue
|
||
|
||
@Brighter
|
||
MOVE.B (A4,D0),(A0)+ ; write gamma corrected red
|
||
MOVE.B (A5,D1),(A0)+ ; write gamma corrected green
|
||
|
||
@Looper
|
||
MOVE.B (A6,D2),(A0)+ ; write gamma corrected blue
|
||
DBRA D3,@SetupLoop ; and loop for each entry
|
||
|
||
Swap D4 ; Put the temp buffer size back in the lo-half.
|
||
|
||
;
|
||
; OK, the stack table is set up. Now let's load the hardware.
|
||
;
|
||
Move.l D6,A3 ; Get our privates pointer back into A3 (for WaitVSync).
|
||
Move.w Sr,-(SP) ; Preserve the status register.
|
||
BSR VSCWaitVSync ; Wait for next blanking period (preserves A0/D0).
|
||
|
||
MOVE.W csCount(A2),D3 ; get the count again
|
||
MOVE.L saveVDACBase(A3),A3 ; get the VDAC base
|
||
LEA ArielDataReg(A3),A3 ; point to VDAC data register
|
||
|
||
LEA 2(SP),A0 ; point to the stack buffer again
|
||
|
||
BTST #UseSeq,D5 ; is it sequence mode?
|
||
BNE.S VSCSeqWrite ; yup, sequence mode, so go there
|
||
|
||
;
|
||
; Here's the loop that actually writes to the hardware when in indexed mode.
|
||
;
|
||
|
||
VSCIndexWrite
|
||
MOVE.B (A0)+,ArielAddrReg-ArielDataReg(A3) ; write the index value to the CLUT address
|
||
_CLUTDelay ;
|
||
MOVE.B (A0)+,(A3) ; write red
|
||
_CLUTDelay ;
|
||
MOVE.B (A0)+,(A3) ; write green
|
||
_CLUTDelay ;
|
||
MOVE.B (A0)+,(A3) ; write blue
|
||
_CLUTDelay ;
|
||
DBRA D3,VSCIndexWrite ; and loop
|
||
BRA.S VSCSEDone ;
|
||
|
||
;
|
||
; Write the translated starting position for sequence mode.
|
||
;
|
||
|
||
VSCSeqWrite
|
||
MOVE.W csStart(A2),d1 ; get sequence start address
|
||
MOVE.B d1,ArielAddrReg-ArielDataReg(A3) ; write the sequence start position
|
||
_CLUTDelay ;
|
||
|
||
;
|
||
; Here's the loop that actually writes to the hardware when in sequence mode.
|
||
;
|
||
|
||
@SeqLoop
|
||
MOVE.B (A0)+,(A3) ; write red
|
||
_CLUTDelay ;
|
||
MOVE.B (A0)+,(A3) ; write green
|
||
_CLUTDelay ;
|
||
MOVE.B (A0)+,(A3) ; write blue
|
||
_CLUTDelay ;
|
||
DBRA D3,@SeqLoop ; and loop
|
||
|
||
;
|
||
; Clean up and go home.
|
||
;
|
||
|
||
VSCSEDone MOVE (SP)+,SR ; restore status register
|
||
|
||
ADD D4,SP ; release stack buffer
|
||
MOVEM.L (SP)+,A1/A4-A6/D4-D7 ; restore registers
|
||
BRA VSCCtlGood ; return O-Tay!
|
||
|
||
VSCSEBadExit
|
||
MOVEM.L (SP)+,A1/A4-A6/D4-D7 ; restore registers
|
||
BRA VSCCtlBad ; return an error code
|
||
|
||
ENDWITH
|
||
|
||
VSCSetGamma
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Set the gamma table. This call copies the supplied gTable so the
|
||
; caller does not have to put the source on the system heap. It
|
||
; tests if the gamma table is exactly a match to the currently
|
||
; connected monitor, or always allows it if the monitor number in
|
||
; the FormulaData is -1. If supplied gamma table ptr is NIL, then
|
||
; it loads a linear gamma table into the private table
|
||
;
|
||
; A0 = Ptr to private storage
|
||
; A1 = Ptr to AuxDCE
|
||
; A2 = Ptr to cs parameter record
|
||
;
|
||
;---------------------------------------------------------------------
|
||
|
||
WITH VSCVidPrivates
|
||
|
||
; Get new gamma table and check that we know how to handle it.
|
||
|
||
MOVE.L csGTable(A2),D0 ; test for a NIL pointer
|
||
BEQ @LinearTab ; if so, then set up a linear gamma table
|
||
MOVE.L D0,A2 ; get pointer to new gamma table
|
||
|
||
TST.W gVersion(A2) ; version = 0?
|
||
BNE VSCCtlBad ; => no, return error
|
||
Tst.w gType(A2) ; Test the hardwareID.
|
||
Beq.s @ChangeTable ; If 0, then accept a TFB-style gamma table.
|
||
CMP.W #drHwVSC,gType(A2) ; type = VSC?
|
||
BNE VSCCtlBad ; => no, return error
|
||
TST.W gFormulaSize(A2) ; if gType=VSC, then check for monID in gFormulaData
|
||
BEQ.S @ChangeTable ; if zero, then generic, so continue
|
||
|
||
MOVE.W gFormulaData(A2),D0 ; get the monitor ID this table was intended for
|
||
CMP.W saveMonID(A3),D0 ; is this the monitor?
|
||
BEQ.S @ChangeTable ; yes, so do it
|
||
ADDQ #1,D0 ; was it -1?
|
||
BNE VSCCtlBad ; nope, so must be wrong monitor
|
||
|
||
; If new table is a different size, reallocate memory.
|
||
|
||
@ChangeTable
|
||
|
||
MOVE.L saveGammaPtr(A3),A0 ; get current gamma in A0
|
||
MOVE gFormulaSize(A2),D0 ; get size of formula in new
|
||
CMP gFormulaSize(A0),D0 ; same as current gamma table
|
||
BNE.S @GetNew ; =>no, resize pointer
|
||
MOVE gChanCnt(A2),D0 ; get number of tables in new
|
||
CMP gChanCnt(A0),D0 ; same as current gamma table?
|
||
BEQ.S @SizeOK ; => yes, data size ok
|
||
BGT.S @GetNew ; => new one is bigger, save old one
|
||
@NewSize Move.l saveGamDispPtr(A3),A0 ; if new one is smaller,
|
||
_DisposPtr ; dispose old one
|
||
CLR.L saveGamDispPtr(A3) ; flag it's been disposed
|
||
|
||
@GetNew Moveq #0,D0 ; (_NewPtr takes a long, so clear D0 for later.)
|
||
MOVE gDataCnt(A2),D0 ; get number of entries
|
||
MULU gChanCnt(A2),D0 ; multiply by number of tables
|
||
ADD gFormulaSize(A2),D0 ; add size of formula data
|
||
ADD #gFormulaData,D0 ; add gamma table header size
|
||
_NewPtr ,Sys ; and allocate a new pointer
|
||
BNE VSCCtlBad ; => unable to allocate storage
|
||
|
||
MOVE.L saveGamDispPtr(A3),D0 ; get old gamma table
|
||
MOVE.L A0,saveGammaPtr(A3) ; save new gamma table
|
||
TST.L D0 ; was there an old one?
|
||
BEQ.S @SizeOK ; => no, already disposed
|
||
MOVE.L D0,A0 ; else get old table
|
||
_DisposPtr ; and dispose of old gamma table
|
||
|
||
MOVE.L saveGammaPtr(A3),A0 ; get new gamma table back
|
||
Move.l A0,saveGamDispPtr(A3) ; save it for disposal
|
||
|
||
; Copy the gamma table header.
|
||
|
||
@SizeOK MOVE gChanCnt(A2),D0 ; get number of tables
|
||
MOVE gFormulaSize(A2),D1 ; get size of formula data
|
||
MOVE gDataCnt(A2),D2 ; get number of entries
|
||
MOVE.L (A2)+,(A0)+ ; copy gamma header
|
||
MOVE.L (A2)+,(A0)+ ; which is
|
||
MOVE.L (A2)+,(A0)+ ; 12 bytes long
|
||
|
||
; Copy the data.
|
||
|
||
MULU D0,D2 ; multiply by number of tables
|
||
ADD D1,D2 ; add in size of formula data
|
||
SUBQ #1,D2 ; get count - 1
|
||
@NxtByte MOVE.B (A2)+,D0 ; get a byte
|
||
MOVE.B D0,(A0)+ ; move a byte
|
||
DBRA D2,@NxtByte ; => repeat for all bytes
|
||
|
||
Bra.s @GammaDone ; Check to see if it’s a direct device.
|
||
|
||
;
|
||
; Set up a linear gamma table. To prevent memory thrash, build this new one
|
||
; the same size as the existing one (one or three channel).
|
||
;
|
||
|
||
@LinearTab
|
||
|
||
MOVE.L saveGammaPtr(A3),A0 ; get current gamma in A0
|
||
MOVE.W gFormulaSize(A0),D0 ; get size of formula in new
|
||
MOVE.W gChanCnt(A0),D2 ; get the number of tables
|
||
SUBQ #1,D2 ; zero based, of course
|
||
Move.w gDataCnt(A0),D3 ; get the number of entries
|
||
Subq #1,D3 ; zero base
|
||
ADDA #gFormulaData,A0 ; point to tables
|
||
ADDA D0,A0 ; point past monID, if present
|
||
@ChanLoop MOVE.W D3,D0 ; loop count within each channel
|
||
@entryLoop MOVE.B D0,(A0) ; write this value out
|
||
Not.b (A0)+ ; invert to make table ramp properly
|
||
DBRA D0,@entryLoop ; for each entry in channel
|
||
DBRA D2,@ChanLoop ; and each channel
|
||
|
||
@GammaDone
|
||
BTST #IsDirect,GFlags(A3) ; are we in a direct mode?
|
||
BEQ.S @Out ; if not, then we're done
|
||
BSR VSCDirectCLUTSet ; if so, then set up direct CLUT ramps
|
||
|
||
@Out
|
||
BRA VSCCtlGood ; => return no error
|
||
|
||
ENDWITH
|
||
|
||
VSCGrayPage
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Clear the specified page in the current mode to gray
|
||
;
|
||
; A0 = Ptr to private storage
|
||
; A1 = Ptr to AuxDCE
|
||
; A2 = Ptr to cs parameter record
|
||
; A3 = Ptr to driver privates
|
||
;
|
||
;---------------------------------------------------------------------
|
||
|
||
WITH VSCVidPrivates
|
||
|
||
MOVE saveMode(A3),D1 ; D1 = mode
|
||
BSR VSCChkMode ; convert mode to depth in D1
|
||
BNE VSCCtlBad ; => not a valid depth
|
||
|
||
MOVE csPage(A2),D0 ; D0 = page
|
||
BNE VSCCtlBad ; => not a valid page
|
||
|
||
BSR VSCGrayScreen ; paint the screen gray
|
||
|
||
BTST #IsDirect,GFlags(A3) ; are we in a direct mode?
|
||
BEQ.S @Out ; if not, then we're done
|
||
BSR VSCDirectCLUTSet ; if so, then set up direct CLUT ramps
|
||
@Out
|
||
BRA VSCCtlGood ; => return no error
|
||
|
||
ENDWITH
|
||
|
||
VSCSetGray
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Set luminance mapping on (csMode = 1) or off (csMode = 0)
|
||
;
|
||
; When luminance mapping is on, RGB values passed to setEntries are mapped
|
||
; to grayscale equivalents before they are written to the CLUT.
|
||
;
|
||
; A1 = Ptr to AuxDCE
|
||
; A2 = Ptr to cs parameter record
|
||
;
|
||
;---------------------------------------------------------------------
|
||
|
||
WITH VSCVidPrivates
|
||
|
||
BTST #IsMono,GFlags(A3) ; is this a mono-only monitor?
|
||
BEQ.S @1 ; if not, then go ahead
|
||
MOVE.B #1,csMode(A2) ; always turn on for mono devices
|
||
@1 MOVEQ #0,D1 ; set up for BFEXTU to point to GrayFlag
|
||
BSR.S VSCSetIntCom ; call common code
|
||
BRA VSCCtlGood ; all done
|
||
|
||
;
|
||
; This shared routine setup up a flag in GFlags. It takes a pointer to
|
||
; private storage in A3, and the bit field start location in D1.
|
||
;
|
||
|
||
VSCSetIntCom
|
||
MOVE.B csMode(A2),D0 ; get boolean
|
||
BFINS D0,GFlags(A3){D1:1} ; set flag bit
|
||
RTS ; and return
|
||
|
||
ENDWITH
|
||
|
||
|
||
VSCSetInterrupt
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Enable (csMode = 0) or disable (csMode = 1) VBL interrupts
|
||
;
|
||
; As a future performance enhancement, interrupts on the card can be
|
||
; disabled or enabled from software. For instance, if the cursor is
|
||
; not on a screen, and there is nothing in the Slot Interrupt Queue
|
||
; for that device, interrupts may be disabled reducing interrupt
|
||
; overhead for the system.
|
||
;
|
||
; The slot interrupt queue element is always allocated by the Open call.
|
||
; This routine just inserts and removes it from the slot interrupt task queue.
|
||
;
|
||
; A1 = Ptr to AuxDCE
|
||
; A2 = Ptr to cs parameter record
|
||
; A3 = Ptr to private storage
|
||
;
|
||
;---------------------------------------------------------------------
|
||
|
||
WITH VDPageInfo,SlotIntQElement,VSCVidPrivates
|
||
|
||
If usingTimeMgr Then
|
||
Tst.b csMode(A2) ; Check to see which way we’re going.
|
||
Else
|
||
MOVEQ #1,D1 ; set up for BFEXTU to point to IntDisFlag
|
||
BSR.S VSCSetIntCom ; call common code
|
||
Endif
|
||
BNE.S @DisableThem ; If non-zero, then we’re disabling.
|
||
|
||
; This code enables interrupts and installs the interrupt handler.
|
||
;
|
||
BSR.S VSCEnableVGuts ; call common code
|
||
BNE VSCCtlBad ; error, flag problem
|
||
BRA VSCCtlGood ; and go home
|
||
|
||
; This code disables VBL interrupts, then removes the interrupt handler.
|
||
;
|
||
@DisableThem
|
||
BSR.S VSCDisableVGuts ; jump to the disabling utility
|
||
BRA VSCCtlGood ; all done
|
||
|
||
; The following two routines are common code shared between the Open/Close calls
|
||
; and the SetInterrupt control call.
|
||
;
|
||
VSCDisableVGuts
|
||
|
||
If usingTimeMgr Then
|
||
Move.w #-1,IntDisableFlag(A3) ; Remember that we’re disabling things.
|
||
Rts
|
||
Else
|
||
MOVE.W SR,-(SP) ; preserve the status register
|
||
BSR VSCWaitVSync ; to be safe, wait for the next VBL
|
||
|
||
Move.l saveAIV3Base(A3),A0 ; Get the VSC base address.
|
||
Move.b #(1<<slotVBL),AIV3SlotEn(A0) ; Disable Slot interrupts.
|
||
|
||
MOVE.W (SP)+,SR ; re-enable cursor interrupts
|
||
MOVEQ #0,D0 ; parameter size to SInstall is not byte sized so clr whole long
|
||
MOVE.B dCtlSlot(A1),D0 ; setup slot # for _SIntRemove
|
||
MOVE.L saveSQElPtr(A3),A0 ; get the SQ element pointer
|
||
_SIntRemove ; remove the interrupt handler
|
||
RTS
|
||
Endif
|
||
|
||
VSCEnableVGuts
|
||
|
||
If usingTimeMgr Then
|
||
Clr.w IntDisableFlag(A3) ; Remember that we’re enabling things.
|
||
|
||
MOVE.L A1,-(SP) ; jPrimeTime trashes A1
|
||
LEA TTask(A3),A0 ; get time task block in A0
|
||
MOVE.L #kVSCVBLTime,D0 ; delay for about 1/60th of a second
|
||
MOVE.L jPrimeTime,A1 ; point straight at the Time Manager dispatch vector
|
||
JSR (A1) ; start the delay going
|
||
MOVEA.L (SP)+,A1 ;
|
||
Else
|
||
MOVE.L saveSQElPtr(A3),A0 ; get the queue element
|
||
LEA VSCBeginIH,A2 ; save Pointer to interrupt handler
|
||
MOVE.W #SIQType,SQType(A0) ; setup queue ID
|
||
MOVE.L A2,SQAddr(A0) ; setup int routine address
|
||
MOVE.L A3,SQParm(A0) ; pass pointer to privates as the parameter
|
||
MOVEQ #0,D0 ; parameter size to SInstall is not byte sized so clr whole long
|
||
MOVE.B dCtlSlot(A1),D0 ;
|
||
_SIntInstall ; and do install
|
||
BNE.S @IntBad
|
||
|
||
move.l a0,-(sp) ; Save the queue element pointer.
|
||
Move.l saveAIV3Base(A3),A0 ; Get the AIV3 base address.
|
||
Move.b #((1<<7)+(1<<slotVBL)),AIV3SlotEn(A0) ; Enable Slot interrupts.
|
||
Move.b #(1<<7)+(1<<AnySlotEn),AIV3IntEn(A0); make sure Any slot interrupts are enabled.
|
||
move.l (sp)+,a0 ; restore the queue element pointer.
|
||
Endif
|
||
|
||
CMP.W D0,D0 ; clear z-bit for good result
|
||
@IntBad RTS ; return home (if bad, z-bit is set above, so just leave)
|
||
|
||
ENDWITH
|
||
|
||
VSCDirectSetEntries
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Change the CLUT in a direct mode.
|
||
;
|
||
; A1 = Ptr to AuxDCE
|
||
; A2 = Ptr to cs parameter record
|
||
; A3 = Ptr to private storage
|
||
;
|
||
; This routine allows knowledgeable programs modify the contents
|
||
; of the CLUT in direct modes (usually for limited color previewing).
|
||
; It takes the same parameter block as SetEntries, but SetEntries
|
||
; intentionally does not operate when the card is in a direct pixMode.
|
||
; This routine takes the same data and operates ONLY when in direct
|
||
; modes. It calls the same SetEntries guts as the regular routine.
|
||
;
|
||
;---------------------------------------------------------------------
|
||
|
||
BTST #IsDirect,GFlags(A3) ; are we in a direct mode?
|
||
BEQ.S VSCCtlBad ; error if not
|
||
BRA.S VSCSEGuts ; jump to SetEntries internals if it's OK
|
||
|
||
VSCSetDefaultMode
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Write the card default mode into slot pRAM.
|
||
;
|
||
; A1 = Ptr to AuxDCE
|
||
; A2 = Ptr to cs parameter record
|
||
; A3 = Ptr to private storage
|
||
;
|
||
; This routine is called by Monitors when somebody selects an alternate
|
||
; video mode family in the Options dialog.
|
||
;
|
||
;---------------------------------------------------------------------
|
||
|
||
WITH spBlock,VSCVidPrivates,SP_Params
|
||
|
||
;
|
||
; Set up a slot parameter block on the stack.
|
||
;
|
||
|
||
SUBA #spBlockSize,SP ; make an slot parameter block on stack
|
||
MOVE.L SP,A0 ; get pointer to parm block now
|
||
MOVE.B dCtlSlot(A1),spSlot(A0) ; put slot in pBlock
|
||
CLR.B spExtDev(A0) ; external device = 0
|
||
|
||
;
|
||
; Read the slot pRAM to determine what the currently saved mode is. The first
|
||
; word is the board ID, followed by the default screen depth. Built-in video keeps the video
|
||
; sRsrc spID in VendorUse2.
|
||
;
|
||
|
||
SUBA #SizesPRAMRec,SP ; allocate block for pRAM record
|
||
MOVE.L SP,spResult(A0) ; point to it
|
||
_sReadPRAMRec ; read it
|
||
|
||
;
|
||
; Since PrimaryInit relies on the default mode being set correctly, we check to see that
|
||
; the mode to be set is actually valid. Monitors can only see valid sRsrcIDs, so
|
||
; it probably won’t cause a problem. But we should check it anyway for unsavory
|
||
; applications.
|
||
;
|
||
|
||
Move.b csMode(A2),spID(A0) ; Look for the passed in spID.
|
||
Clr.l spParamData(A0) ; Clear the fNext flag; we want THIS sRsrc.
|
||
Ori.b #(1<<fall)|\ ; Search for both enabled/disabled sRsrc’s
|
||
(1<<foneslot),spParamData+3(A0) ; Only search in our slot.
|
||
_GetsRsrc ; Do it.
|
||
Bne @BadExit ; If failed, quit.
|
||
|
||
Move.w spCategory(A0),D0 ; Get the category.
|
||
Cmp.w #catDisplay,D0 ; If it’s not catDisplay,
|
||
Bne @BadExit ; then quit.
|
||
Move.w spCType(A0),D0 ; Get the type.
|
||
Cmp.w #typVideo,D0 ; If it’s not typVideo,
|
||
Bne @BadExit ; then quit.
|
||
Move.w spDrvrSw(A0),D0 ; Get the software kind.
|
||
Cmp.w #drSwApple,D0 ; If it’s not drSwApple,
|
||
Bne.s @BadExit ; then quit.
|
||
Move.w spDrvrHw(A0),D0 ; Get the hardware ID.
|
||
Cmp.w #drHwVSC,D0 ; If it’s not drHwVSC,
|
||
Bne.s @BadExit ; then quit.
|
||
|
||
;
|
||
; It is very important that Monitors (or someone) invalidate and setup the screen resource
|
||
; if this call is exercised. Monitors needs to verify (and potentially re-write to pRAM)
|
||
; the proper screen depth in the new world.
|
||
;
|
||
|
||
Move.b csMode(A2),D1 ; Copy the desired family mode.
|
||
Cmp.b SP_LastConfig(Sp),D1 ; If we’re already going to this mode,
|
||
Beq.s @GoodExit ; then just go on.
|
||
|
||
Movea.l A0,A1 ; Save the SpBlockPtr.
|
||
Move.l #gestaltDisplayMgrAttr,D0 ; We need to know if the Display Manager is around.
|
||
_Gestalt ; Ask, and ye shall receive.
|
||
Bne.s @NoDM ; Oops, got an error.
|
||
Move.l A0,D0 ; Get the result into D0.
|
||
Btst #gestaltDisplayMgrPresent,D0 ; If the Display Manager is around,
|
||
Bne.s @WriteIt ; then skip the non-dynamic stuff.
|
||
|
||
@NoDM Bset #spFamilyChanged,SP_Flags(Sp) ; Otherwise, say that we’re changing the mode.
|
||
Cmpi.b #sRsrc_Vid_VSC_FPa,D1 ; If we’re swapping to the 640x870 mode,
|
||
Beq.s @ChkDepth ; then check the depth.
|
||
Cmpi.b #sRsrc_Vid_VSC_RGBFPa,D1 ; If we’re swapping to the 640x870 mode,
|
||
Beq.s @ChkDepth ; then check the depth.
|
||
Cmpi.b #sRsrc_Vid_VSC_1K,D1 ; If we’re swapping to the 1024x768 mode,
|
||
Beq.s @ChkDepth ; then check the depth.
|
||
|
||
Cmpi.b #sRsrc_Vid_VSC_FPb,D1 ; If we’re swapping to the 640x818 mode,
|
||
Beq.s @SetDepth ; then set to 8bpp.
|
||
Cmpi.b #sRsrc_Vid_VSC_RGBFPb,D1 ; If we’re swapping to the 640x818 mode,
|
||
Beq.s @SetDepth ; then set to 8bpp.
|
||
Bra.s @WriteIt ; Otherwise, just go on.
|
||
|
||
@ChkDepth Cmpi.b #FourthVidMode,SP_Depth(Sp) ; If were not set for 8bpp mode,
|
||
Bne.s @WriteIt ; then just go on.
|
||
Move.b #ThirdVidMode,SP_Depth(Sp) ; Otherwise, say we want 4bpp instead.
|
||
Bra.s @WriteIt ;
|
||
|
||
@SetDepth Move.b #FourthVidMode,SP_Depth(Sp) ; Use 8bpp.
|
||
|
||
@WriteIt Movea.l A1,A0 ; Restore the SpBlockPtr.
|
||
MOVE.B D1,SP_LastConfig(SP) ; write the mode into pRAM buffer
|
||
MOVE.L SP,spsPointer(A0) ; set up parameter block
|
||
_sPutPRAMRec ; write the new record out
|
||
|
||
@GoodExit ADDA #SizesPRAMRec+spBlockSize,SP ; Deallocate buffer and
|
||
BRA VSCCtlGood ; return good result.
|
||
|
||
@BadExit Adda #SizesPRAMRec+spBlockSize,SP ; Deallocate buffer and
|
||
Bra VSCCtlBad ; return bad result.
|
||
|
||
ENDWITH
|
||
|
||
VSCSwitchMode
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; SwitchMode is called by the Display Manager to either change
|
||
; resolutions, bit depth, or both.
|
||
;
|
||
; A1 = Ptr to AuxDCE
|
||
; A2 = Ptr to cs parameter record
|
||
; A3 = Ptr to private storage
|
||
;
|
||
;---------------------------------------------------------------------
|
||
|
||
With VSCVidPrivates,SpBlock,VDSwitchInfo
|
||
|
||
; Check to see if we can do what was requested…
|
||
;
|
||
Tst.w csPage(A2) ; If requested page is not zero,
|
||
Bne.s VSCCtlBad ; then we can’t help ’em.
|
||
|
||
Move.l csData(A2),D2 ; Get the requested SpID.
|
||
Moveq #0,D0 ; Clear hi-half of mode/depth register.
|
||
Lea SwitchTable,A0 ; Point to the SwitchMode table.
|
||
@ChkLoop Move.b (A0)+,D1 ; If we’re at the end of the table,
|
||
Beq VSCCtlBad ; then something’s wrong.
|
||
|
||
Move.b (A0)+,D0 ; Get the max mode for this config.
|
||
|
||
Cmp.b D1,D2 ; If this is not the requested mode,
|
||
Bne.s @ChkLoop ; then keep looping.
|
||
|
||
; Make sure the new depth is okay for switching…
|
||
;
|
||
Move.w csMode(A2),D1 ; Get the requested mode (depth).
|
||
Subi.w #FirstVidMode,D1 ; Make it indexed.
|
||
Subi.w #FirstVidMode,D0 ; Make the new max mode indexed.
|
||
Cmp.w D0,D1 ; If the current mode is > new max mode,
|
||
Bgt VSCCtlBad ; then punt.
|
||
Move.w D1,D0 ; Save the indexed mode.
|
||
|
||
; Switch to the new resolution…
|
||
;
|
||
Cmp.b dCtlSlotID(A1),D2 ; If we’re already in the requested resolution,
|
||
Beq VSCSetVidModeGuts ; then go try the depth switch.
|
||
|
||
Move.b D2,D1 ; Set up to do the resolution switch.
|
||
Bsr VSCSetResolution ; Switch to the new resolution.
|
||
Move.w D0,D1 ; Set up to do the depth switch.
|
||
Bra VSCSetVidModeGuts ; Switch to the new depth.
|
||
|
||
Endwith
|
||
|
||
VSCSetAltSense
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; SetAltSense sets up the alternate senseID pRam byte to contain
|
||
; a valid “index” code if a valid sense code is passed
|
||
; in csMode (byte 0 is the sense code, byte 1 is the type).
|
||
;
|
||
; A1 = Ptr to AuxDCE/Ptr to VSCMonIDs table (not restored)
|
||
; A2 = Ptr to cs parameter record
|
||
; A3 = Ptr to private storage
|
||
;
|
||
;---------------------------------------------------------------------
|
||
|
||
With SpBlock,VSCVidPrivates,SP_Params
|
||
|
||
;
|
||
; First, set up a slot parameter block on the stack.
|
||
;
|
||
|
||
Suba.w #spBlockSize,Sp ; Make an SpBlock on the stack.
|
||
Move.l Sp,A0 ; Get a pointer to it into A0.
|
||
Move.b dCtlSlot(A1),spSlot(A0) ; Set it up.
|
||
Clr.b spExtDev(A0)
|
||
|
||
;
|
||
; Next, read the current pRam so that we can set it appropriately…
|
||
;
|
||
|
||
Suba.w #SizesPRAMRec,Sp ; Make an sPRAM block on the stack.
|
||
Move.l Sp,spResult(A0) ; Point to it.
|
||
_sReadPRamRec ; Get pRAM.
|
||
|
||
;
|
||
; See what we need to do…
|
||
;
|
||
|
||
Moveq #0,D0 ; Clear D0 for good measure.
|
||
Move.b csMode+1(A2),D0 ; Get the sense-code type.
|
||
Lea VSCMonIDsTbl,A1 ; Point to the MonIDs table.
|
||
|
||
@TypeLoop Cmp.w (A1)+,D0 ; If we’ve come to the end of the table,
|
||
Bmi.s @MonIDNotValid ; then leave with an error.
|
||
Beq.s @ChkOffset ; If we’ve found a match, then check it.
|
||
Tst.w (A1)+ ; Otherwise, skip the offset.
|
||
Bra.s @TypeLoop ; And keep looping until we’re done.
|
||
|
||
@ChkOffset Move.w (A1)+,D1 ; If the offset to the code table is nil,
|
||
Beq.s @MonIDNotValid ; then leave with an error.
|
||
Lea VSCMonIDsTbl,A1 ; Otherwise, re-point to the MonIDsTbl.
|
||
Adda.w D1,A1 ; And point to the appropriate sense-code table.
|
||
|
||
Move.b csMode(A2),D0 ; Get the sense code.
|
||
@CodeLoop Cmp.b (A1)+,D0 ; If we’ve come to the end of the table,
|
||
Bmi.s @MonIDNotValid ; then leave with an error.
|
||
Beq.s @ChkIt ; If we’ve found a match, then check it.
|
||
Tst.b (A1)+ ; Otherwise, skip the indexed code.
|
||
Bra.s @CodeLoop ; And keep looping until we’re done.
|
||
|
||
@ChkIt Move.b (A1)+,D1 ; Get the indexed ID for this code.
|
||
Cmpi.b #indexedNoConnect,D1 ; If it’s the no-connect code,
|
||
Beq.s @ClearIt ; then say so.
|
||
|
||
Move.b D1,SP_AltSense(Sp) ; Write out “index” to pRam record.
|
||
Ori.b #spAltSenseValidMask,SP_AltSense(Sp) ; Validate it.
|
||
Bra.s @WritePRam
|
||
|
||
@ClearIt Clr.b SP_AltSense(Sp) ; Invalidate no-connect byte.
|
||
|
||
@WritePRam Move.l Sp,spsPointer(A0) ; Set up to whack pRam.
|
||
_sPutPRAMRec ; Whack it.
|
||
|
||
Adda.w #SizesPRAMRec+spBlockSize,Sp ; Restore stack…
|
||
Bra VSCCtlGood ; …and leave.
|
||
|
||
@MonIDNotValid Adda.w #SizesPRAMRec+spBlockSize,Sp ; Restore stack…
|
||
Bra VSCCtlBad ; …leave with error.
|
||
|
||
Endwith
|
||
|
||
VSCSleepWake
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; SleepWake sets the sleep/wake state of the VSC hardware to the
|
||
; the value in csMode.
|
||
;
|
||
; csMode.b -> 0 = sleep, non-zero = wake
|
||
; csMode.w <- [return MonID for Docking Handler]
|
||
;
|
||
; A1 = Ptr to AuxDCE/Ptr to VSC reg base (not restored)
|
||
; A2 = Ptr to cs parameter record
|
||
; A3 = Ptr to private storage
|
||
;
|
||
;---------------------------------------------------------------------
|
||
|
||
With VSCVidPrivates
|
||
|
||
Move.b #-1,sleepWakeFlag(A3) ; Say that we’re sleep-waking.
|
||
|
||
Tst.b csMode(A2) ; If the request was to sleep, then
|
||
Beq.s @ChkSleep ; make sure it’s okay.
|
||
|
||
Btst #IsSleeping,GFlags(A3) ; Otherwise, if we’re already awake, then
|
||
Beq VSCCtlBad ; something’s wrong.
|
||
Bclr #IsSleeping,GFlags(A3) ; Remember that we’re no longer asleep.
|
||
Moveq #0,D1 ; Set up to power up.
|
||
Bra.s VSCLowPwrGuts ; Do it.
|
||
|
||
@ChkSleep Btst #IsSleeping,GFlags(A3) ; If we’re already sleeping, then
|
||
Bne VSCCtlBad ; something’s wrong.
|
||
Move.w saveMonID(A3),csMode(A2) ; Remember which display we’re driving.
|
||
Bset #IsSleeping,GFlags(A3) ; Remember that we’ve been asked to sleep.
|
||
Moveq #-1,D1 ; Set up to power down.
|
||
Bra.s VSCLowPwrGuts ; Do it.
|
||
|
||
VSCLowPwrSelect
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; LowPwrSelect sets the power state of the VSC hardware to the
|
||
; the value in csMode.
|
||
;
|
||
; csMode : 0 = PowerOn VSC, nonzero = PowerDown VSC
|
||
;
|
||
; A1 = Ptr to AuxDCE/Ptr to VSC reg base (not restored)
|
||
; A2 = Ptr to cs parameter record
|
||
; A3 = Ptr to private storage
|
||
;
|
||
;---------------------------------------------------------------------
|
||
|
||
VSCPSelectRegs REG a0-a1
|
||
|
||
Lea VSCValidCPUs,A0 ; Point to list of valid CPUs.
|
||
Moveq #0,D0 ; Clear D0 for good measure.
|
||
@CPULoop Move.w (A0)+,D0 ; Get next entry in list.
|
||
Bmi.s VSCCtlBad ; If at EOL, then we’re dead.
|
||
Cmp.b CPUFlag,D0 ; If the entry matches,
|
||
Beq.s @EndCPUChk ; then we’re okay.
|
||
Tst.w (A0)+ ; Skip over offset.
|
||
Bra.s @CPULoop ; Loop until done.
|
||
@EndCPUChk
|
||
Clr.b sleepWakeFlag(A3) ; Say that we’re not sleep-waking.
|
||
move.w csMode(a2),d1 ; determine which power state to enter
|
||
VSCLowPwrGuts
|
||
movem.l VSCPSelectRegs,-(sp) ; save them regs
|
||
bne @VSCPowerDown ; IF powering down THEN branch
|
||
@VSCPowerUp
|
||
tst.b savePowerStatus(a3) ; IF already powered up THEN
|
||
beq @VSCPSelectCommonOut ; leave.
|
||
|
||
bsr VSCPowerOnPlanes ; turn on power planes and clocks
|
||
movea.l saveVideoBase(a3),a1 ; get pointer to VSC register base
|
||
lea saveParams(a3),a0 ; get pointer to our storage area
|
||
|
||
move.b (a0)+,VSC_BusInt(a1) ; restore the bus interface
|
||
move.b (a0)+,VSC_VidCtrl(a1) ; restore the control register
|
||
|
||
; enable interrupts
|
||
move.l saveAIV3Base(a3),a1 ; Get the AIV3 base address.
|
||
If Not usingTimeMgr Then
|
||
move.b #((1<<7)+(1<<slotVBL)),\
|
||
AIV3SlotEn(a1) ; Enable Slot interrupts.
|
||
Endif
|
||
move.b #(1<<7)+(1<<AnySlotEn),AIV3IntEn(a1); make sure Any slot interrupts are enabled.
|
||
|
||
Tst.b sleepWakeFlag(A3) ; If we’re doing the sleep-wake case,
|
||
Bne.s @SkipLowPwr0 ; then skip the low-power stuff.
|
||
Bsr VSCRestoreBusErrH ; Otherwise, remove our bus error handler.
|
||
If Not usingTimeMgr Then
|
||
Bsr VSCRemoveTTask ; Remove phony jVBLTask VBLs.
|
||
; ••• bsr VSCEnableVGuts ; power up those interrupts
|
||
Endif
|
||
Bra.s @SkipGrayScreen0 ; Don’t grayscreen on low-power.
|
||
@SkipLowPwr0
|
||
Move.w saveMode(A3),D1 ; Get the current depth.
|
||
Move.w D1,csMode(A2) ; Save it for later.
|
||
Subi.w #FirstVidMode,D1 ; Make it an index.
|
||
Bsr VSCGrayScreen ; Gray the screen.
|
||
@SkipGrayScreen0
|
||
move.w #-1,saveMode(A3) ; clobber Mode so that update will take effect
|
||
bra.s @VSCPSelectCommonOut ; good bye
|
||
|
||
;---------------------------------------------------------------------
|
||
;---------------------------------------------------------------------
|
||
@VSCPowerDown
|
||
tst.b savePowerStatus(a3) ; IF already powered down THEN
|
||
bne.s @VSCPSelectCommonOut ; exit
|
||
|
||
movea.l saveVideoBase(a3),a1 ; get pointer to VSC register base
|
||
lea saveParams(a3),a0 ; get pointer to our storage area
|
||
|
||
; save appropriate registers
|
||
move.b VSC_BusInt(a1),(a0)+ ; save the bus interface
|
||
move.b VSC_VidCtrl(a1),(a0)+ ; save the control register
|
||
|
||
Tst.b sleepWakeFlag(A3) ; If we’re doing the sleep-wake case,
|
||
Bne.s @SkipLowPwr1 ; then skip the low-power stuff.
|
||
bsr VSCInstallBusErrH ; Install our buserr handler
|
||
If Not usingTimeMgr Then
|
||
; ••• bsr VSCDisableVGuts ; kill interrupts
|
||
Bsr VSCInstallTTask ; Enable phony jVBLTask VBLs.
|
||
Endif
|
||
Bra.s @SkipGrayScreen1 ; Don’t grayscreen on low-power.
|
||
@SkipLowPwr1
|
||
Move.w saveMode(A3),D1 ; Get the current depth.
|
||
Subi.w #FirstVidMode,D1 ; Make it an index.
|
||
Bsr VSCGrayScreen ; Gray the screen.
|
||
@SkipGrayScreen1
|
||
bsr VSCPowerDownPlanes ; kill power planes and clocks
|
||
|
||
@VSCPSelectCommonOut
|
||
Movem.l (Sp)+,VSCPSelectRegs ; Restore the work registers.
|
||
Tst.b savePowerStatus(A3) ; If we’re powered down,
|
||
Bne VSCCtlGood ; then just leave.
|
||
Move.w csMode(A2),D1 ; Set up for sleep-wake just in case.
|
||
Tst.b sleepWakeFlag(A3) ; If we’re doing the sleep-wake case,
|
||
Bne VSCSetVidModeGuts ; then restore the depth.
|
||
Bra VSCCtlGood ; Vamoose.
|
||
|
||
Endwith
|
||
|
||
**********************************************************************
|
||
*
|
||
* VideoClose releases the device's private storage and removes the
|
||
* interrupt handler.
|
||
*
|
||
*
|
||
* Entry: A0 = param block pointer
|
||
* A1 = AuxDCE pointer
|
||
*
|
||
* Other: A2 = temporary AuxDCE pointer copy
|
||
*
|
||
**********************************************************************
|
||
|
||
VSCVidClose
|
||
|
||
WITH VSCVidPrivates
|
||
|
||
MOVE.L dCtlStorage(A1),A3 ; A3 <- Ptr to private storage
|
||
MOVE.L (A3),D0 ;
|
||
_StripAddress ;
|
||
MOVE.L D0,A3 ;
|
||
|
||
If usingTimeMgr Then
|
||
MOVE.W #-1,IntDisableFlag(A3) ; set this word to “disable” interrupts
|
||
LEA TTask(A3),A0 ; get the time manager task block
|
||
_RmvTime ; remove this element from the queue
|
||
Else
|
||
BSR VSCDisableVGuts ; call utility to deactivate interrupts
|
||
MOVE.L saveSQElPtr(A3),A0 ; get the slot interrupt queue element ptr
|
||
_DisposPtr
|
||
Endif
|
||
|
||
MOVE.L saveGamDispPtr(A3),A0 ; get pointer to gamma table block
|
||
_DisposPtr ; and dispose it
|
||
|
||
Move.l saveVidPtr(A3),A0 ; Get pointer to video parameters block,
|
||
_DisposPtr ; and dispose of it.
|
||
|
||
MOVE.L dCtlStorage(A1),A0 ; dispose of the private storage
|
||
_DisposHandle ;
|
||
|
||
MOVEQ #noErr,D0 ; no error
|
||
RTS ; and return
|
||
|
||
ENDWITH
|
||
|
||
**********************************************************************
|
||
*
|
||
* Video Driver Status Call Handler. There are fourteen standard calls:
|
||
*
|
||
* ($00) Error
|
||
* ($01) Error
|
||
* ($02) GetMode
|
||
* ($03) GetEntries
|
||
* ($04) GetPage
|
||
* ($05) GetPageBase
|
||
* ($06) GetGray
|
||
* ($07) GetInterrupt
|
||
* ($08) GetGamma
|
||
* ($09) GetDefaultMode
|
||
* ($0A) GetCurMode
|
||
* ($0B) GetSync
|
||
* ($0C) GetConnection
|
||
* ($0D) GetModeTiming
|
||
*
|
||
* The following calls are VSC-specific:
|
||
*
|
||
* ($83) GetAltSense
|
||
* ($84) GetPwrSelect
|
||
*
|
||
* Entry: A0 = paramblock pointer
|
||
* A1 = AuxDCE pointer
|
||
* Uses: A2 = cs parameters
|
||
* A3 = pointer to private storage
|
||
* D0-D3 = scratch (don't need to be preserved)
|
||
*
|
||
* Exit: D0 = error code
|
||
*
|
||
**********************************************************************
|
||
|
||
VSCVidStatus
|
||
|
||
MOVEM.L A0/A1,-(SP) ; Save exit registers.
|
||
|
||
MOVE.L csParam(A0),A2 ; A2 <- Ptr to control parameters
|
||
|
||
MOVE.L dCtlStorage(A1),A3 ; A3 <- Ptr to private storage
|
||
MOVE.L (A3),D0 ;
|
||
_StripAddress ;
|
||
MOVE.L D0,A3 ;
|
||
|
||
MOVE.W csCode(A0),D0 ; get routine selector
|
||
|
||
Cmpi.w #cscSleepWake,D0 ; If we got the sleep-wake call,
|
||
Beq VSCGetSleepWake ; then hop to it.
|
||
CMP.W #cscPowerSelect,D0 ; If we got the Power Select
|
||
BEQ VSCGetPwrSelect ; do it
|
||
TST.B savePowerStatus(a3) ; IF not powered up THEN
|
||
BNE.S VSCStatBad ; exit (make no status calls, dammit!)
|
||
|
||
Cmpi.w #cscAltSense,D0 ; If we got the AltSense call,
|
||
Beq VSCGetAltSense ; hop to it.
|
||
|
||
CMP.W #$0C,D0 ;IF csCode NOT IN [0..C] THEN
|
||
BHI.S VSCStatBad ; Error, csCode out of bounds.
|
||
MOVE.W VSCStatJumpTbl(PC,D0.W*2),D0 ;Get the relative offset to the routine.
|
||
JMP VSCStatJumpTbl(PC,D0.W) ;GOTO the proper routine.
|
||
|
||
VSCStatJumpTbl
|
||
DC.W VSCStatBad-VSCStatJumpTbl ;$00 => Error
|
||
DC.W VSCStatBad-VSCStatJumpTbl ;$01 => Error
|
||
DC.W VSCGetMode-VSCStatJumpTbl ;$02 => GetMode
|
||
DC.W VSCGetEntries-VSCStatJumpTbl ;$03 => GetEntries
|
||
DC.W VSCGetPage-VSCStatJumpTbl ;$04 => GetPage
|
||
DC.W VSCGetPageBase-VSCStatJumpTbl ;$05 => GetPageBase
|
||
DC.W VSCGetGray-VSCStatJumpTbl ;$06 => GetGray
|
||
DC.W VSCGetInterrupt-VSCStatJumpTbl ;$07 => GetInterrupt
|
||
DC.W VSCGetGamma-VSCStatJumpTbl ;$08 => GetGamma
|
||
DC.W VSCGetDefaultMode-VSCStatJumpTbl ;$09 => GetDefaultMode
|
||
Dc.w VSCGetCurMode-VSCStatJumpTbl ;$0A => GetCurMode
|
||
Dc.w VSCStatBad-VSCStatJumpTbl ;$0B => GetSync (not implemented)
|
||
Dc.w VSCGetConnection-VSCStatJumpTbl ;$0C => GetConnection
|
||
|
||
VSCStatBad MOVEQ #statusErr,D0 ; else say we don't do this one
|
||
BRA.S VSCStatDone ; and return
|
||
|
||
VSCStatGood MOVEQ #noErr,D0 ; return no error
|
||
|
||
VSCStatDone MOVEM.L (SP)+,A0/A1 ; Restore exit registers.
|
||
BRA VSCExitDrvr
|
||
|
||
VSCGetMode
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Return the current mode
|
||
;
|
||
; Inputs : A2 = pointer to csParams
|
||
; A3 = pointer to private storage
|
||
;
|
||
;---------------------------------------------------------------------
|
||
|
||
WITH VSCVidPrivates
|
||
|
||
MOVE.W saveMode(A3),csMode(A2) ; return the mode
|
||
Clr.w csPage(A2) ; return the page number (always 0)
|
||
|
||
Move.l saveScreenBase(A3),csBaseAddr(A2) ; Return the screen baseAddr.
|
||
BRA.S VSCStatGood ; => return no error
|
||
|
||
ENDWITH
|
||
|
||
VSCGetEntries
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Read the current contents of the CLUT. These values were gamma corrected
|
||
; when they were set (by VSCSetEntries), so they may not match the source
|
||
; cSpec array.
|
||
;
|
||
; Inputs : A1 = pointer to AuxDCE
|
||
; A2 = pointer to csParams/CLUT read register (not restored to csParams)
|
||
; A3 = pointer to private storage
|
||
;
|
||
;---------------------------------------------------------------------
|
||
|
||
With VSCCLUTRec
|
||
|
||
Movem.l D4-D6,-(Sp) ; Save work registers.
|
||
Tst.l -(Sp) ; Make some room.
|
||
|
||
Move.l csTable(A2),D0 ; If we were handed a nil pointer,
|
||
Beq @GEErr ; then hike.
|
||
_StripAddress ; Make table pointer 32-bit clean.
|
||
Move.l D0,(Sp) ; And save it.
|
||
|
||
Move.w saveMode(A3),D1 ; Get the current video mode.
|
||
Sub.w #firstVidMode,D1 ; Convert it to an index.
|
||
|
||
Moveq #0,D3 ; clear all of D3 for .w compare.
|
||
Lea VSCCLUTTbl,A0 ; Point to the table of CLUT data.
|
||
Lea (A0,D1*VSCCLUTSize),A0 ; Point to the right entry.
|
||
Move.b scRange(A0),D3 ; Get the CLUT range.
|
||
|
||
Move.w csCount(A2),D4 ; Get the number of entries to change,
|
||
Bmi @GEErr ; and hike if it’s out of range.
|
||
Cmp.w D3,D4 ; If D4-D3 > 0 (count - range > 0),
|
||
Bhi @GEErr ; then hike.
|
||
Tst.w csStart(A2) ; If we’re doing indexed entries (-1),
|
||
Bmi.s @skipStartChk ; then just go on.
|
||
Add.w csStart(A2),D4 ; Adjust count for starting position.
|
||
Cmp.w D3,D4 ; If D4-D3 > 0 (count - range > 0),
|
||
Bhi @GEErr ; then hike.
|
||
|
||
@skipStartChk
|
||
|
||
Move.b scStart(A0),D2 ; Get the starting position.
|
||
Move.w scSkip(A0),D5 ; Get the inter-entry skip factor.
|
||
Move.w csCount(A2),D6 ; Remember the csCount.
|
||
|
||
Cmpi.w #indexEntries,csStart(A2) ; If table accesses are to be indexed,
|
||
Beq.s @GECom ; then go on.
|
||
|
||
; The following code is BAD, BAD, BAD! We should build our own table here so
|
||
; as to NOT mess up the user’s data. But all the previous Apple video drivers
|
||
; have done the same thing here, so we’ll continue the trend for now.
|
||
|
||
Move.l (Sp),A0 ; Get ptr to csTable.
|
||
Move.w D6,D1 ; Get count.
|
||
|
||
@TableLoop Move.w D4,value(A0,D1*colorSpecSize) ; Write the index into the table.
|
||
Subq #1,D4 ; Decrement index.
|
||
Dbra D1,@TableLoop ;
|
||
|
||
@GECom Move.l (Sp)+,A0 ; Get/restore ptr to csTable.
|
||
|
||
Move.l saveVDACBase(A3),A2 ; Get VDAC base address.
|
||
Add.w #ArielDataReg,A2 ; Add offset to Palette read register.
|
||
|
||
Move.w Sr,-(Sp) ; Save current interrupt level
|
||
Bsr VSCWaitVSync ; Wait for VBL.
|
||
|
||
@Repeat Move.w value(A0),D1 ; Get the NEXT Clut position into D1.
|
||
Cmp.w D3,D1 ; If this position is out of range,
|
||
Bhi.s @Until ; then go on.
|
||
|
||
Mulu.w D5,D1 ; Multiply index by skip value.
|
||
Add.b D2,D1 ; Add in the starting posistion.
|
||
Move.b D1,ArielAddrReg-ArielDataReg(A2) ; Tell the Clut where to read from.
|
||
|
||
Move.b (A2),D1 ; Get Red:
|
||
Move.b D1,rgb+red(A0) ; --> $rrXX
|
||
Move.b D1,rgb+red+1(A0) ; --> $rrrr
|
||
|
||
Move.b (A2),D1 ; Get Green:
|
||
Move.b D1,rgb+green(A0) ; --> $ggXX
|
||
Move.b D1,rgb+green+1(A0) ; --> $gggg
|
||
|
||
Move.b (A2),D1 ; Get Blue:
|
||
Move.b D1,rgb+blue(A0) ; --> $bbXX
|
||
Move.b D1,rgb+blue+1(A0) ; --> $bbbb
|
||
|
||
@Until Addq #colorSpecSize,A0 ; Point to next entry ColorTable.
|
||
Dbra D6,@Repeat
|
||
|
||
Move.w (Sp)+,Sr ; Restore previous interrupt level.
|
||
|
||
Movem.l (Sp)+,D4-D6 ; Restore work registers.
|
||
Bra VSCStatGood ; Return noError.
|
||
|
||
@GEErr Tst.l (Sp)+ ; Clean up stack.
|
||
Movem.l (Sp)+,D4-D6 ; Restore work registers.
|
||
Bra VSCStatBad ; Return statError.
|
||
|
||
VSCGetPage
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Return the number of pages in the specified mode. It's pretty simple;
|
||
; every mode has only one page. We do check if it's valid, however.
|
||
;
|
||
;---------------------------------------------------------------------
|
||
|
||
WITH VSCVidPrivates
|
||
|
||
MOVE csMode(A2),D1 ; get the mode
|
||
MOVE D1,D2 ; keep a copy
|
||
BSR VSCChkMode ; is this mode OK?
|
||
BNE VSCStatBad ; => not a valid mode
|
||
|
||
MOVE.W #1,csPage(A2) ; return page count
|
||
BRA VSCStatGood ; => return no error
|
||
|
||
ENDWITH
|
||
|
||
VSCGetPageBase
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Return the base address for the specified page in the current mode
|
||
;
|
||
;---------------------------------------------------------------------
|
||
|
||
WITH VSCVidPrivates
|
||
|
||
TST.W csPage(A2) ; are we returning page zero info?
|
||
BNE VSCStatBad ; only page 0 is valid
|
||
|
||
Move.l saveScreenBase(A3),csBaseAddr(A2) ; Return the screen baseAddr.
|
||
BRA VSCStatGood ; => return no error
|
||
|
||
ENDWITH
|
||
|
||
VSCGetGray
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Return a boolean, set true if luminance mapping is on
|
||
;
|
||
;---------------------------------------------------------------------
|
||
|
||
WITH VSCVidPrivates
|
||
|
||
MOVEQ #0,D1 ; set up for BFEXTU
|
||
|
||
VSCGetFlagCom
|
||
|
||
BFEXTU GFlags(A3){D1:1},D0 ; get the state of flag
|
||
MOVE.B D0,csMode(A2) ; return value
|
||
BRA VSCStatGood ; => and return
|
||
|
||
ENDWITH
|
||
|
||
VSCGetInterrupt
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Return a boolean in csMode, set true if VBL interrupts are disabled
|
||
;
|
||
;---------------------------------------------------------------------
|
||
|
||
WITH VSCVidPrivates
|
||
|
||
If usingTimeMgr Then
|
||
TST.W IntDisableFlag(A3) ; test the interrupt state
|
||
BEQ.S @isOn ; if not on,
|
||
MOVE.B #1,csMode(A2) ; then return disabled state.
|
||
BRA VSCStatGood ;
|
||
@isOn
|
||
CLR.B csMode(A2) ; return enabled state
|
||
BRA VSCStatGood
|
||
Else
|
||
MOVEQ #1,D1 ; set up BFEXTU to point at IntDisFlag
|
||
BRA.S VSCGetFlagCom ; and use common code
|
||
EndIf
|
||
|
||
ENDWITH
|
||
|
||
VSCGetGamma
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Return the pointer to the current gamma table
|
||
;
|
||
;---------------------------------------------------------------------
|
||
|
||
WITH VSCVidPrivates
|
||
|
||
MOVE.L saveGammaPtr(A3),csGTable(A2) ; return the pointer to the structure
|
||
BRA VSCStatGood ; and return a good result
|
||
|
||
ENDWITH
|
||
|
||
VSCGetDefaultMode
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Read the card default mode from slot pRAM.
|
||
;
|
||
; A1 = Ptr to AuxDCE
|
||
; A2 = Ptr to cs parameter record
|
||
; A3 = Ptr to private storage
|
||
;
|
||
;---------------------------------------------------------------------
|
||
|
||
WITH spBlock,VSCVidPrivates,SP_Params
|
||
|
||
;
|
||
; Set up a slot parameter block on the stack.
|
||
;
|
||
|
||
SUBA #spBlockSize,SP ; make an slot parameter block on stack
|
||
MOVE.L SP,A0 ; get pointer to parm block now
|
||
MOVE.B dCtlSlot(A1),spSlot(A0) ; put slot in pBlock
|
||
CLR.B spExtDev(A0) ; external device = 0
|
||
|
||
;
|
||
; Read the slot pRAM to determine what the currently saved mode is. The first
|
||
; byte is the board ID, followed by the default mode. Built-in video keeps the last
|
||
; selected video sRsrc spID in VendorUse2.
|
||
;
|
||
|
||
SUBA #SizesPRAMRec,SP ; allocate block for pRAM record
|
||
MOVE.L SP,spResult(A0) ; point to it
|
||
_sReadPRAMRec ; read it
|
||
|
||
MOVE.B SP_LastConfig(SP),csMode(A2) ; return the result
|
||
ADDA #SizesPRAMRec+spBlockSize,SP ; release buffer
|
||
BRA VSCStatGood ;
|
||
|
||
ENDWITH
|
||
|
||
VSCGetCurMode
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; This call will generally be used in conjuntion with the
|
||
; the SwitchMode control call. Its function is
|
||
; basically to fill out the VDSwitchInfo with the
|
||
; current status. Note that, here, csData, is the
|
||
; current SlotID (sResource number) in use.
|
||
;
|
||
; Note: The implementation of this Status call can be used to
|
||
; determine whether the SwitchMode control call is
|
||
; implemented or currently accessible.
|
||
;
|
||
; Input: A1 = ptr to AuxDCE
|
||
; A2 = ptr to csParams
|
||
; A3 = ptr to driver globals
|
||
;
|
||
;---------------------------------------------------------------------
|
||
|
||
With VSCVidPrivates,VDSwitchInfo
|
||
|
||
; Check to see if we even need to be here or not…
|
||
;
|
||
Moveq #0,D0 ; Clear hi-half of SpID register.
|
||
Move.b dCtlSlotID(A1),D0 ; Get the current SpID.
|
||
|
||
Lea SwitchTable,A0 ; Point to the SwitchMode table.
|
||
@ChkLoop Move.b (A0)+,D1 ; If we’re at the end of the table,
|
||
Beq VSCStatBad ; then this mode can’t switch.
|
||
Cmp.b D0,D1 ; If this is not the current mode,
|
||
Bne.s @ChkLoop ; then keep looping.
|
||
|
||
; Return the appropriate information if all is well…
|
||
;
|
||
Move.w saveMode(A3),csMode(A2) ; Return the current mode (bit depth).
|
||
Move.l D0,csData(A2) ; Return the current SpID.
|
||
|
||
Move.l saveScreenBase(A3),csBaseAddr(A2) ; Return the base address for this page.
|
||
Clr.w csPage(A2) ; But we only support page #0.
|
||
|
||
Bra VSCStatGood ; Vamoose.
|
||
|
||
Endwith
|
||
|
||
VSCGetConnection
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; This call will generally be used in conjuntion with the
|
||
; the SwitchMode control call. Its function is
|
||
; to fill out the VDDisplayConnectInfo with the
|
||
; right status.
|
||
;
|
||
; Input: A1 = ptr to AuxDCE
|
||
; A2 = ptr to csParams
|
||
; A3 = ptr to driver globals
|
||
;
|
||
;---------------------------------------------------------------------
|
||
|
||
With VSCVidPrivates,VDDisplayConnectInfo
|
||
|
||
Lea VSCConnectTable,A0 ; Point to the table of connect values.
|
||
@ConnectLoop Move.w (A0)+,D0 ; Get the indexed display code.
|
||
Bmi.s @UseDefault ; If we’re at the table’s end, then use the defaults.
|
||
Cmp.w saveMonID(A3),D0 ; Otherwise, if we found a match, then
|
||
Beq.s @FoundOne ; hop to it.
|
||
Adda.w #ConnectEntrySz-2,A0 ; Otherwise, skip to the next entry.
|
||
Bra.s @ConnectLoop
|
||
|
||
@UseDefault Lea VSCDfltConnect,A0 ; Point to the default table.
|
||
@FoundOne
|
||
Move.w (A0)+,csDisplayType(A2) ; Write out the display type.
|
||
Move.l (A0)+,csConnectFlags(A2) ; Write out the flags.
|
||
Bra VSCStatGood ; Vamoose.
|
||
|
||
Endwith
|
||
|
||
VSCGetAltSense
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Returns the alternate senseID code that’s in use. It
|
||
; should be noted that we cannot disguish between PAL &
|
||
; NTSC monitors & encoder boxes once SetAltSense has
|
||
; been called (because both the monitor & box codes are
|
||
; mapped into the same indexedSense code). We pas back
|
||
; this information in csMode (byte 0 is the sense code,
|
||
; byte 1 is the type).
|
||
;
|
||
; A1 = Ptr to AuxDCE/Ptr to VSCMonIDs table (not restored)
|
||
; A2 = Ptr to cs parameter record
|
||
; A3 = Ptr to private storage
|
||
;---------------------------------------------------------------------
|
||
|
||
With SpBlock,VSCVidPrivates,SP_Params
|
||
|
||
;
|
||
; First, set up a slot parameter block on the stack.
|
||
;
|
||
|
||
Suba.w #spBlockSize,Sp ; Make a SpBlock on the stack.
|
||
Move.l Sp,A0 ; Get a pointer to it into A0.
|
||
Move.b dCtlSlot(A1),spSlot(A0) ; Set it up.
|
||
Clr.b spExtDev(A0)
|
||
|
||
;
|
||
; Next, read the current pRam so that we can determine whether the
|
||
; alternate senseID code is valid or not.
|
||
;
|
||
|
||
Suba.w #SizesPRAMRec,Sp ; Make an sPRAM block on the stack.
|
||
Move.l Sp,spResult(A0) ; Point to it.
|
||
_sReadPRamRec ; Get pRAM.
|
||
|
||
Clr.b csMode+1(A2) ; Assume the code is type-0 for now.
|
||
Move.b SP_AltSense(Sp),D1 ; Get the alternate senseID byte.
|
||
Andi.b #spAltSenseValidMask,D1 ; If it is valid,
|
||
Bne.s @Valid ; return it.
|
||
Move.b #indexedNoConnect,csMode(A2) ; Otherwise, return the indexed no-connect code,
|
||
Bra.s @Exit ; and leave.
|
||
|
||
@Valid Move.b SP_AltSense(Sp),D1 ; Get the no-connect byte again.
|
||
Andi.b #spAltSenseMask,D1 ; Strip the validation code.
|
||
|
||
Lea VSCType_0_MonIDs,A1 ; Point to the Type_0_MonIDs.
|
||
Bsr @ValidLoop ; Search there.
|
||
|
||
Move.b #6,csMode+1(A2) ; Assume we’ll find a type-6 sense code.
|
||
Lea VSCType_6_MonIDs,A1 ; Point to the Type_6_MonIDs.
|
||
Bsr @ValidLoop ; Search there.
|
||
|
||
Move.b #7,csMode+1(A2) ; Assume we’ll find a type-7 sense code.
|
||
Lea VSCType_7_MonIDs,A1 ; Point to the Type_7_MonIDs.
|
||
Bsr @ValidLoop ; Search there.
|
||
|
||
Clr.b csMode+1(A2) ; Nothing matched…
|
||
Moveq #indexedNoConnect,D0 ; …so just say no-connect.
|
||
|
||
@WriteIt Move.b D0,csMode(A2) ; Return valid sense code.
|
||
@Exit Adda.w #SizesPRAMRec+spBlockSize,Sp ; Restore stack, and
|
||
Bra VSCStatGood ; go home.
|
||
|
||
@ValidLoop Move.b (A1)+,D0 ; Get the sense code.
|
||
Cmp.b (A1)+,D1 ; If the index matches what’s in PRAM,
|
||
Beq.s @WriteItOut ; then return the sense code.
|
||
Tst.b (A1) ; If we’re at the end of the list,
|
||
Bmi.s @ChkNextType ; then move on.
|
||
Bra.s @ValidLoop ; Otherwise, loop away.
|
||
|
||
@WriteItOut Addq #4,Sp ; Clean up the stack.
|
||
Bra.s @WriteIt ; And leave.
|
||
|
||
@ChkNextType Rts
|
||
|
||
Endwith
|
||
|
||
VSCGetPwrSelect
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; GetPwrSelect returns the power state of the VSC/Jet hardware to the
|
||
; the value in csMode. It also returns the powerSelSig in the
|
||
; csData field so that we know that this driver supports the
|
||
; cscPowerSelect call.
|
||
;
|
||
; csMode : 0 = PowerOn VSC, nonzero = PowerDown VSC
|
||
;
|
||
; A1 = Ptr to AuxDCE/Ptr to VSC reg base (not restored)
|
||
; A2 = Ptr to cs parameter record
|
||
; A3 = Ptr to private storage
|
||
;
|
||
;---------------------------------------------------------------------
|
||
|
||
With VSCVidPrivates,VDPageInfo
|
||
|
||
Lea VSCValidCPUs,A0 ; Point to list of valid CPUs.
|
||
Moveq #0,D0 ; Clear D0 for good measure.
|
||
@CPULoop Move.w (A0)+,D0 ; Get next entry in list.
|
||
Bmi.s VSCStatBad ; If at EOL, then we’re dead.
|
||
Cmp.b CPUFlag,D0 ; If the entry matches,
|
||
Beq.s @EndCPUChk ; then we’re okay.
|
||
Tst.w (A0)+ ; Skip over offset.
|
||
Bra.s @CPULoop ; Loop until done.
|
||
@EndCPUChk
|
||
Move.b savePowerStatus(A3),csMode+1(A2) ; Return the current power status.
|
||
Move.l #powerSelSig,csData(A2) ; Return the powerSelSig.
|
||
|
||
Bra VSCStatGood ; Return
|
||
|
||
Endwith
|
||
|
||
VSCGetSleepWake
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; GetSleepWake
|
||
;
|
||
; Returns the current sleep/wake state of the software/hardware.
|
||
;
|
||
; Input: A1 = ptr to AuxDCE
|
||
; A2 = ptr to csParams
|
||
; A3 = ptr to driver globals
|
||
;
|
||
; csParams: csMode.b <- 0 = sleep, non-zero = wake
|
||
;
|
||
;---------------------------------------------------------------------
|
||
|
||
With VSCVidPrivates
|
||
|
||
Btst #IsSleeping,GFlags(A3) ; Test the sleep/wake flag.
|
||
Seq csMode(A2) ; Return result.
|
||
Move.l #sleepWakeSig,csData(A2) ; Return the sleepWakeSig.
|
||
Bra VSCStatGood ; Vamoose.
|
||
|
||
Endwith
|
||
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Exit from Control or Status.
|
||
;
|
||
; A0 = Ptr to param block.
|
||
; A1 = Ptr to AuxDCE.
|
||
; D0 = error code.
|
||
;
|
||
;---------------------------------------------------------------------
|
||
|
||
VSCExitDrvr BTST #NoQueueBit,ioTrap(A0) ; no queue bit set?
|
||
BEQ.S VSCGoIODone ; => no, not immediate
|
||
RTS ; otherwise, it was an immediate call
|
||
|
||
VSCGoIODone MOVE.L JIODone,-(Sp) ; Get the IODone address,
|
||
Rts ; and go there.
|
||
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; ChkMode
|
||
;
|
||
; Verifies the requested mode is legal. Converts spID in D1 into
|
||
; zero-based mode number since lots of people want it that way.
|
||
;
|
||
; <-> D1: Mode
|
||
; -> A3: Pointer to driver privates
|
||
;
|
||
; All registers preserved
|
||
;
|
||
; Returns EQ if mode is valid.
|
||
;
|
||
|
||
With VSCVidPrivates,VSCVidParams
|
||
|
||
VSCChkMode
|
||
|
||
Movem.l A0/D0,-(Sp) ; Save work registers.
|
||
|
||
Sub.w #FirstVidMode,D1 ; Make mode zero-based.
|
||
Blt.s @ModeBad ; If the passed-in mode is < 0,
|
||
; then punt.
|
||
|
||
Move.l saveVidPtr(A3),A0 ; Get a pointer to the video params.
|
||
Adda.w #vvpMaxModeBase,A0 ; Point to the base of the max mode values.
|
||
|
||
Move.b saveSizeVRAM(A3),D0 ; Get the vRAM size index.
|
||
Move.b (A0,D0),D0 ; Get the maximum mode for this config.
|
||
Sub.w #FirstVidMode,D0 ; Make the max mode zero-based.
|
||
Cmp.w D0,D1 ; If the passed-in mode is > max mode,
|
||
Bgt.s @ModeBad ; then punt.
|
||
|
||
Cmp.w D1,D1 ; Set Eq when okay.
|
||
@ModeBad Movem.l (Sp)+,A0/D0 ; Restore work registers.
|
||
Rts
|
||
|
||
Endwith
|
||
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Wait for vertical blanking.
|
||
;
|
||
; A3 = pointer to private storage
|
||
;---------------------------------------------------------------------
|
||
|
||
With VSCVidPrivates
|
||
|
||
VSCWaitVSync
|
||
|
||
Tst.b savePowerStatus(A3) ; If we’re powered down,
|
||
Bne.s @NoSyncs ; then just leave.
|
||
|
||
MOVE.L A0,-(SP) ; Save work registers.
|
||
MOVE.L D0,-(SP) ; (Two MOVEs are faster than a MOVEM.)
|
||
|
||
MOVE.W SR,-(SP) ; Get the status register on stack.
|
||
MOVEQ #7,D0 ; Get mask into D0.
|
||
AND.B (SP),D0 ; Get the interrupt level.
|
||
SUBQ.B #2,D0 ;
|
||
BGE.S @OK ; If ≥, then don't change.
|
||
ORI.W #$0200,SR ; Raise above level-2.
|
||
ANDI.W #$FAFF,SR ; Make it level-2
|
||
@OK
|
||
Tst.w (Sp)+ ; Restore stack.
|
||
|
||
If Not usingTimeMgr Then
|
||
Move.l saveVideoBase(A3),A0 ; Get the Video Reg base address.
|
||
clr.b VSC_IntClear(A0) ; Clear any pending interrupts.
|
||
|
||
Move.l saveAIV3Base(A3),A0 ; Get the AIV3 base address.
|
||
@SyncLoop Btst #slotVBL,AIV3SlotInt(a0) ; If it’s not pending (0=pending),
|
||
Bne.s @SyncLoop ; then keep looping.
|
||
Endif
|
||
|
||
@Done MOVE.L (SP)+,D0 ; Restore work registers.
|
||
MOVE.L (SP)+,A0 ; (Two MOVEs are faster than a MOVEM.)
|
||
@NoSyncs RTS
|
||
|
||
Endwith
|
||
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; SetDepth sets the depth in the DAC and the framebuffer.
|
||
;
|
||
; D1 contains the spID of the depth - $80 (the zero based mode ID)
|
||
; A1 = AuxDCE POINTER
|
||
; A2 = parameter block pointer
|
||
; A3 = dCtlStorage pointer
|
||
;
|
||
; Preserves all registers
|
||
;
|
||
;---------------------------------------------------------------------
|
||
|
||
VSCSetDepth
|
||
|
||
With VSCVidPrivates,VSCVidParams
|
||
|
||
|
||
Movem.l A0-A1/D0-D2,-(Sp) ; Save our work registers.
|
||
|
||
; Wait for the next VBL before trying to switch depths.
|
||
;
|
||
Move.w Sr,-(Sp) ; Save the current interrupt level.
|
||
Bsr.s VSCWaitVSync ; Wait for the next VBL.
|
||
|
||
; Switch the framebuffer’s depth.
|
||
;
|
||
Move.l saveVideoBase(A3),A0 ; Get the Video Regs base address.
|
||
Move.b D1,VSC_Depth(A0) ; Set the depth.
|
||
|
||
Bsr.s VSCWaitVSync ; Wait for the next VBL.
|
||
|
||
; Switch the CLUT/DAC’s depth.
|
||
;
|
||
Move.l saveVDACBase(A3),A0 ; Point to Ariel.
|
||
Move.b ArielConfigReg(A0),d0 ; Save the current state.
|
||
And.b #ClrDepthBitsMask,d0 ; Clear the depth bits.
|
||
Or.b D1,d0 ; Turn on the depth bits.
|
||
Move.b d0,ArielConfigReg(A0) ; Set the depth.
|
||
|
||
; Go home.
|
||
;
|
||
Move.w (Sp)+,Sr ; Restore the interrupt level.
|
||
Movem.l (Sp)+,A0-A1/D0-D2 ; Restore the work registers.
|
||
Rts ; Return to caller.
|
||
|
||
Endwith
|
||
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; SetResolution gets the video driver and the framebuffer controller
|
||
; set up for being switched to a different resolution.
|
||
;
|
||
; D1 containts the spID to the resolution (mode) to enable.
|
||
; A1 = AuxDCE POINTER
|
||
; A2 = parameter block pointer
|
||
; A3 = dCtlStorage pointer
|
||
;
|
||
; Preserves all registers
|
||
;
|
||
;---------------------------------------------------------------------
|
||
|
||
VSCSetResolution
|
||
|
||
With VSCVidParams,SpBlock
|
||
|
||
Movem.l D0-D1/A0-A1,-(Sp) ; Save work registers.
|
||
|
||
Move.b dCtlSlotId(A1),D0 ; Remember which sRsrc to disable.
|
||
Move.b D1,dCtlSlotId(A1) ; Remember which sRsrc to enable.
|
||
|
||
; Do the Slot Manager changes…
|
||
;
|
||
Suba.w #spBlockSize,Sp ; Allocate a slot parameter block on the stack.
|
||
Move.l Sp,A0 ; Point to it with A0.
|
||
Move.b dCtlSlot(A1),spSlot(A0) ; Set up the right slot number.
|
||
Clr.b spExtDev(A0) ; Don’t ask why, just clear this guy.
|
||
|
||
Move.b D0,spID(A0) ; Write out the spID of the sRsrc.
|
||
_sRsrcInfo ; (Update our SpBlock for below.)
|
||
Move.l #1,spParamData(A0) ; Say that we want this sRsrc disabled.
|
||
_SetSRsrcState ; Do it.
|
||
|
||
Move.b dCtlSlotId(A1),spID(A0) ; Write out the spID of the sRsrc.
|
||
Move.l #0,spParamData(A0) ; Say that we want it enabled.
|
||
_SetSRsrcState ; Do it.
|
||
_sUpdateSRT ; Tell the Slot Manager to update itself.
|
||
|
||
; Load the “new” video hardware setup block…
|
||
;
|
||
Clr.w spID(A0) ; Start looking at spID 0, no external devices.
|
||
Clr.b spTBMask(A0) ; Only look for the board sRsrc.
|
||
Move.w #catBoard,spCategory(A0) ; Look for: catBoard,
|
||
Move.w #typBoard,spCType(A0) ; typBoard,
|
||
Clr.w spDrvrSW(A0) ; 0,
|
||
Clr.w spDrvrHW(A0) ; 0.
|
||
Clr.l spParamData(A0) ; (The board sRsrc must be enabled.)
|
||
Bset #foneslot,spParamData+3(A0) ; Limit search to slot 0.
|
||
_GetTypeSRsrc ; Get the spsPointer.
|
||
|
||
Move.b #sVidParmDir,spID(A0) ; Look for the video parameters dir.
|
||
_sFindStruct ; Load it.
|
||
|
||
Move.b dCtlSlotId(A1),spID(A0) ; Look in the directory for this config's parameters.
|
||
_sGetBlock ; Load it.
|
||
|
||
Move.l spResult(A0),-(Sp) ; Save the new privates.
|
||
Movea.l saveVidPtr(A3),A0 ; Point to the old privates.
|
||
_DisposPtr ; Dispose them.
|
||
Move.l (Sp)+,saveVidPtr(A3) ; Start using the new ones.
|
||
|
||
Adda.w #spBlockSize,Sp ; De-allocate the slot parameter block.
|
||
|
||
; Change the hardware…
|
||
;
|
||
Movea.l saveVidPtr(A3),A1 ; Point to the vidParams.
|
||
Movea.l saveVideoBase(A3),A0 ; Get the Video Reg base address.
|
||
|
||
Move.w Sr,-(Sp) ; Save the current interrupt level.
|
||
Bsr.s VSCWaitVSync ; Wait for the next VBL.
|
||
Bclr #VSCblankBit,VSC_VidCtrl(A0) ; Blank the display.
|
||
Bsr VSCSetDotClk ; Set up the dot clock to requested config.
|
||
|
||
Move.b (A1)+,VSC_HFP(A0) ; Set horizontal front porch.
|
||
Move.b (A1)+,VSC_HS(A0) ; Set horizontal sync.
|
||
Move.b (A1)+,VSC_HBP(A0) ; Set horizontal back porch.
|
||
Move.b (A1)+,VSC_HA(A0) ; Set horizontal active dots.
|
||
Move.b (A1)+,VSC_SyncA(A0) ; Set SyncA dots.
|
||
Move.w (A1)+,VSC_VFP(A0) ; Set vertical front porch.
|
||
Move.w (A1)+,VSC_VS(A0) ; Set vertical sync lines.
|
||
Move.w (A1)+,VSC_VBP(A0) ; Set vertical back porch.
|
||
Move.w (A1)+,VSC_VA(A0) ; Set vertical active lines.
|
||
|
||
Bsr.s VSCWaitVSync ; Wait for the next VBL.
|
||
Bset #VSCblankBit,VSC_VidCtrl(A0) ; Unblank the display.
|
||
|
||
; Clean up and go home…
|
||
;
|
||
Move.w (Sp)+,Sr ; Restore the interrupt level.
|
||
Movem.l (Sp)+,D0-D1/A0-A1 ; Restore the work registers.
|
||
Rts
|
||
|
||
Endwith
|
||
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Fill the screen with a 50% dithered gray pattern. To have gotten here
|
||
; we must have had a valid display connected, so there are not tests
|
||
; for inactive displays here.
|
||
;
|
||
; D1 = spID of screen depth - FirstVidMode
|
||
; A3 = driver private storage
|
||
;
|
||
; All registers are preserved
|
||
;
|
||
|
||
With VSCVidPrivates,VSCVidParams
|
||
|
||
VSCGrayScreen
|
||
movem.l d0-d6/a1-a2,-(sp) ; Save our work registers.
|
||
|
||
move.l saveScreenBase(a3),a2 ; Get the base address of the screen.
|
||
|
||
move.l saveVidPtr(a3),a1 ; Get a pointer to the vidParams.
|
||
move.w vvpNumRows(a1),d4 ; Get the number of rows to gray.
|
||
adda.w #VVPHdrSize,a1 ; Skip past the header info.
|
||
move.w (a1,d1*2),d3 ; Get the number of longwords/row.
|
||
move.w d3,d5
|
||
andi.w #$03,d5 ; d5 = Rem(bytes/row DIV 4)
|
||
lsr.w #2,d3 ; d3 = Int(longs/row)
|
||
|
||
lea VSCPats,a1 ; Point to the table of gray patterns.
|
||
move.l (a1,d1*4),d2 ; Get the gray pattern.
|
||
|
||
moveq #true32b,d0 ; Set up to flip into 32-bit addressing mode.
|
||
_SwapMMUMode ; Do flip.
|
||
|
||
@nextRow move.l d3,d1 ; Get the number of longswords/row.
|
||
move.l d5,d6 ; get remaining bytes/row.
|
||
bra.s @cntLong
|
||
|
||
@nextLong move.l d2,(a2)+ ; Write out long gray to the frame buffer…
|
||
@cntLong dbra d1,@nextLong ; …for each scanline.
|
||
bra.s @cntByte
|
||
|
||
@nextByte move.b d2,(a2)+ ; finish remainder of row (if any) with bytes
|
||
@cntByte dbra d6,@nextByte
|
||
|
||
not.l d2 ; Invert the pattern for the next row.
|
||
dbra d4,@nextRow ; Repeat for each row.
|
||
|
||
_SwapMMUMode ; Switch back to the previous addressing mode.
|
||
movem.l (sp)+,d0-d6/a1-a2 ; Restore the work registers.
|
||
rts ; Return to caller.
|
||
|
||
Endwith
|
||
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; DirectCLUTSet writes gamma-corrected ascending grayscale-like ramps
|
||
; into the CLUT
|
||
;
|
||
; A3 = dCtlStorage pointer
|
||
;
|
||
; Preserves all registers used.
|
||
;
|
||
;---------------------------------------------------------------------
|
||
|
||
With VSCVidPrivates
|
||
|
||
VSCDirectCLUTSet
|
||
|
||
MOVEM.L D0-D2/A0/A4-A6,-(SP) ; save registers
|
||
|
||
MOVE.L saveGammaPtr(A3),A0 ; get pointer to gamma data structure
|
||
MOVE.W gFormulaSize(A0),D0 ; get the size of formula data
|
||
LEA gFormulaData(A0),A4 ; point to formula data
|
||
ADD D0,A4 ; red correction table starts here
|
||
MOVE.L A4,A5 ; get default pointer to green data
|
||
MOVE.L A4,A6 ; get default pointer to blue data
|
||
|
||
CMP.W #1,gChanCnt(A0) ; if only only one table, we're set
|
||
BEQ.S @OneTbl ; => just one table
|
||
|
||
MOVE gDataWidth(A0),D1 ; get width of each entry in bits
|
||
ADDQ #7,D1 ; round to nearest byte
|
||
LSR #3,D1 ; get bytes per entry
|
||
MULU gDataCnt(A0),D1 ; get size of table in bytes
|
||
|
||
ADDA D1,A5 ; calc base of green
|
||
ADDA D1,A6 ; calc base…
|
||
ADDA D1,A6 ; …of blue
|
||
|
||
@OneTbl MOVE.W gDataCnt(A0),D2 ; Get number of entries.
|
||
Subq #1,D2 ; Make it zero based.
|
||
|
||
MOVE.L saveVDACBase(A3),A0 ; point to the hardware
|
||
ADDA #ArielDataReg,A0 ; point to data register
|
||
CLR.B ArielAddrReg-ArielDataReg(A0) ; start at the beginning of CLUT
|
||
|
||
Move.w #$1F,D2 ; There are only 32 entries to whack in 16bpp mode.
|
||
|
||
MOVE.W SR,-(SP) ; preserve the status register
|
||
BSR VSCWaitVSync ; wait for next blanking period (preserves A0)
|
||
|
||
; Write an incrementing grayscale ramp.
|
||
|
||
moveq #0,D0 ; Start the ramp at zero.
|
||
|
||
@Repeat move.w D0,D1 ; Copy the current index.
|
||
bsr.s VSCTrans5to8 ; Translate from 5-bits to 8.
|
||
|
||
MOVE.B (A4,D1),(A0) ; Write gamma-corrected red.
|
||
_CLUTDelay ;
|
||
MOVE.B (A5,D1),(A0) ; Write gamma-corrected green
|
||
_CLUTDelay ;
|
||
MOVE.B (A6,D1),(A0) ; Write gamma-corrected blue.
|
||
_CLUTDelay ;
|
||
|
||
Addq #1,D0 ; Increment the ramp index.
|
||
DBRA D2,@Repeat ; Loop until done.
|
||
|
||
MOVE.W (SP)+,SR ; restore the status reg
|
||
MOVEM.L (SP)+,D0-D2/A0/A4-A6 ; restore saved registers
|
||
RTS
|
||
|
||
Endwith
|
||
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Trans5to8
|
||
;
|
||
; <-> D1: 5-bit value to be converted into an 8-bit index.
|
||
;
|
||
|
||
VSCTrans5to8
|
||
|
||
Move.l D0,-(Sp) ; Save D0 as scratch.
|
||
Moveq #0,D0 ; Clear it.
|
||
|
||
Move.w D1,D0 ; D1 = ---43210, D0 = ---43210.
|
||
Lsl.w #3,D1 ; D1 = 43210---, D0 = ---43210.
|
||
Lsr.w #2,D0 ; D1 = 43210---, D0 = -----432.
|
||
Or.w D0,D1 ; D1 = 43210432.
|
||
|
||
Move.l (Sp)+,D0 ; Restore D0.
|
||
Rts
|
||
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Misc Utility Routines
|
||
;
|
||
;---------------------------------------------------------------------
|
||
|
||
;---------------------------------------------------------------------
|
||
; VSCSetSupervisorMode
|
||
;
|
||
; Input: none
|
||
;
|
||
; Outputs: none
|
||
;
|
||
; Destroys: a1/d0
|
||
;
|
||
; Function: When VM is running we must switch to supervisor mode so
|
||
; that we may run necessary privileged instructions. Yes
|
||
; we are the operating system and that is acceptable!!!
|
||
;---------------------------------------------------------------------
|
||
VSCSetSupervisorMode
|
||
move.l (sp)+,a1 ; Save a copy of return address since we might switch stacks
|
||
moveq #8,d0 ; Set selector to Set Supervisor Mode for VM
|
||
_DebugUtil
|
||
cmpi.w #paramErr,d0 ; IF VM is on THEN
|
||
bne.s @Cont ; D0 = Status Register
|
||
move.w sr,d0 ; ELSE Save the current Status Register
|
||
@Cont andi.w #$EFFF,sr ; Make sure that we are in the interrupt stack
|
||
jmp (a1) ; Get out of here
|
||
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Routine: VSCPowerOnPlanes
|
||
;
|
||
; Inputs: A3 = Ptr to private storage
|
||
;
|
||
; Outputs: none
|
||
;
|
||
; Destroys: none
|
||
;
|
||
; Function: Turns the power planes on for the video and starts the
|
||
; clocks into VSC.
|
||
;---------------------------------------------------------------------
|
||
|
||
WITH VSCVidParams
|
||
|
||
VSCPowerOnPlanes
|
||
VSCPowerOnPlanesReg REG a0-a2/a4/d0
|
||
movem.l VSCPowerOnPlanesReg,-(sp) ; save some regs
|
||
|
||
; Get some useful values up front.
|
||
;
|
||
movea.l saveAIV3Base(a3),a2 ; get pointer to AIV3
|
||
movea.l saveVideoBase(a3),a4 ; get pointer to VSC register base
|
||
|
||
Movea.l saveVidPtr(A3),A1 ; Point to start of vidParams.
|
||
|
||
; Make sure everything is off/reset until we’re ready to go.
|
||
;
|
||
Bset #VidPwrEn,AIV3PwrEn(A2) ; Turn on video power plane…
|
||
Clr.b VSC_VidCtrl(A4) ; …but shut off syncs, dot clock, etc….
|
||
|
||
Move.w #500-1,D0 ; It takes approximately 500µs…
|
||
@Wait500 Tst.b ([VIA]) ; …for the power-on signal to
|
||
Dbra D0,@Wait500 ; …propagate thru the video circuitry.
|
||
|
||
Bset #vidReset,VSC_Test(A4) ; Reset the video subsystem by…
|
||
Bclr #vidReset,VSC_Test(A4) ; …toggling the reset bit.
|
||
|
||
move.b #(1<<slotVBL),AIV3SlotEn(A2) ; Disable VBL’s.
|
||
|
||
; Set up the video for 1bpp.
|
||
;
|
||
clr.b VSC_Depth(a4) ; Set the frame buffer controller to 1bpp.
|
||
|
||
bsr VSCSetDotClk ; setup the dot clock to requested config
|
||
move.b #((1<<VSCenB0)+(1<<VSCenB1)+\ ; enable both banks of VRAM before we size
|
||
(1<<VSCEnDotClk)),VSC_VidCtrl(a4) ; enable the dot clock
|
||
|
||
Tst.b saveSizeVRAM(A3) ; If we’ve got 1024K, then
|
||
Bne.s @EndSize ; then just go on.
|
||
Bclr #VSCEnB1,VSC_VidCtrl(A4) ; Otherwise, configure VSC for only 1 bank.
|
||
@EndSize
|
||
|
||
move.b (a1)+,VSC_HFP(a4) ; set horizontal front porch
|
||
move.b (a1)+,VSC_HS(a4) ; set horizontal sync
|
||
move.b (a1)+,VSC_HBP(a4) ; set horizontal back porch
|
||
move.b (a1)+,VSC_HA(a4) ; set horizontal active dots
|
||
move.b (a1)+,VSC_SyncA(a4) ; set SyncA dots
|
||
move.w (a1)+,VSC_VFP(a4) ; set vertical front porch
|
||
move.w (a1)+,VSC_VS(a4) ; set vertical sync lines
|
||
move.w (a1)+,VSC_VBP(a4) ; set vertical back porch
|
||
move.w (a1)+,VSC_VA(a4) ; set vertical active lines
|
||
|
||
; Set up the CLUT/DAC for 1bpp, and then blank it.
|
||
;
|
||
Movea.l saveVidPtr(A3),A1 ; Point to start of vidParams.
|
||
movea.l saveVDACBase(a3),a2 ; Get the base address of the VDAC (Ariel)
|
||
move.b #$08,ArielConfigReg(a2) ; Set the CLUT/DAC to 1bpp, master mode, no overlay.
|
||
|
||
adda.w #ArielDataReg,a2 ; Point to the CLUT/DAC data register.
|
||
move.b #$7F,ArielAddrReg-ArielDataReg(a2) ; Setup to write 1st entry.
|
||
_ClutDelay
|
||
Clr.b (a2) ; Write: red,
|
||
_ClutDelay
|
||
Clr.b (a2) ; green,
|
||
_ClutDelay
|
||
Clr.b (a2) ; blue.
|
||
_ClutDelay
|
||
|
||
move.b #$FF,ArielAddrReg-ArielDataReg(a2) ; Setup to write 2nd entry.
|
||
_ClutDelay
|
||
Clr.b (a2) ; Write: red,
|
||
_ClutDelay
|
||
Clr.b (a2) ; green,
|
||
_ClutDelay
|
||
Clr.b (a2) ; blue.
|
||
|
||
;-------------------------------------------------------
|
||
; Turn on video now
|
||
;-------------------------------------------------------
|
||
|
||
; First, turn on the syncs…
|
||
;
|
||
move.b VSC_VidCtrl(a4),d0 ; Save the current bits.
|
||
ori.b #((1<<VSCEnCSync)+\ ; enable composite sync…
|
||
(1<<VSCEnVSync)+(1<<VSCEnHSync)+\ ; enable h/v sync…
|
||
(1<<VSCExtMuxDelay)),d0 ; enable ???
|
||
move.b d0,VSC_VidCtrl(a4) ; Do it!
|
||
|
||
; Next, wait for the monitor to catch up with us…
|
||
;
|
||
Move.w Sr,-(Sp) ; Save the status register
|
||
Bsr.s VSCWaitVSync ; Wait for next VBL.
|
||
Move.w (Sp)+,Sr ; Restore the status register.
|
||
|
||
; Finally, get video going.
|
||
;
|
||
Ori.b #(1<<VSCblankBit),VSC_VidCtrl(A4) ; Enable blanking.
|
||
|
||
@PoweredUp clr.b savePowerStatus(a3) ; set flag to power on state
|
||
movem.l (sp)+,VSCPowerOnPlanesReg ; restore them reg
|
||
rts
|
||
|
||
Endwith
|
||
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Routine: VSCSetDotClk
|
||
;
|
||
; Inputs: a1 - ptr to config word.l/bit count.w
|
||
; a3 - VSCVidPrivates
|
||
;
|
||
;
|
||
; Outputs: a1 - bumped past clock info, points to VSC parameters
|
||
;
|
||
; Destroys: a1
|
||
;
|
||
; Function: Loads the PLL with a value pointed to by a1. a1+4 = # bits to load
|
||
;---------------------------------------------------------------------
|
||
|
||
With VSCVidParams,VSCVidPrivates
|
||
|
||
VSCDotClkReg REG a0/a3/d0-d3
|
||
VSCSetDotClk
|
||
movem.l VSCDotClkReg,-(sp) ; save some regs
|
||
move.l VIA,a0 ; VIA base in a0 for delays
|
||
move.l saveAIV3Base(a3),a3 ; Ptr to AIV3 base
|
||
|
||
move.w #firstCtrl,d0 ; first control word
|
||
moveq #CtrlCount,d1 ; count
|
||
bsr.s VSCSendPLLData ; send it serially
|
||
|
||
move.l (a1)+,d0 ; serial config word
|
||
move.w (a1)+,d1 ; count
|
||
bne.s @sendData
|
||
|
||
move.w #postCtrl,d0 ;if count 0, special case (use default)
|
||
moveq #CtrlCount,d1 ; count
|
||
bsr.s VSCSendPLLData ; send it serially
|
||
|
||
bsr VSCDelay8ms ; delay at least 5 ms before sending final word
|
||
|
||
move.w #postCtrl,d0 ; final control word
|
||
moveq #CtrlCount,d1 ; count
|
||
bsr.s VSCSendPLLData ; send it serially
|
||
bra.s @exit ; and exit
|
||
|
||
@sendData bsr.s VSCSendPLLData ; send it serially
|
||
|
||
move.w #postCtrl,d0 ; post control word
|
||
moveq #CtrlCount,d1 ; count
|
||
bsr.s VSCSendPLLData ; send it serially
|
||
|
||
bsr VSCDelay8ms ; delay at least 5 ms before sending final word
|
||
|
||
move.w #finalCtrl,d0 ; final control word
|
||
moveq #CtrlCount,d1 ; count
|
||
bsr.s VSCSendPLLData ; send it serially
|
||
@exit movem.l (sp)+,VSCDotClkReg ; restore them regs
|
||
rts ;
|
||
|
||
Endwith
|
||
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Routine: VSCSendPLLData
|
||
;
|
||
; Inputs: a3 - Ptr to AIV3 base
|
||
; d0.l - Data to shift out
|
||
; d1.w - Number of bits to shift out minus 1 (n-1)
|
||
;
|
||
; Outputs: none
|
||
;
|
||
; Destroys: d1-d3
|
||
;
|
||
; Function: Sends the specified data to the PLL through the VIA (AIV3).
|
||
;---------------------------------------------------------------------
|
||
|
||
VSCSendPLLData
|
||
move sr,-(sp) ; save the status register
|
||
ori #HiIntMask,sr ; mask them interrupts
|
||
rol.l #6,d0 ; first, move starting bit into bit 6
|
||
|
||
@nextBit move.l d0,d3
|
||
andi.b #(1<<6),d3 ; Only keep bit 6 (data bit)
|
||
move.b AIV3cfg(a3),d2 ; get config reg
|
||
andi.b #(1<<0),d2 ; keep CPU speed bit
|
||
or.b d3,d2 ; add in data bit
|
||
move.b d2,AIV3cfg(a3) ; write the data bit, reset clock line
|
||
ori.b #$20,d2
|
||
move.b d2,AIV3cfg(a3) ; Set the the clock line
|
||
ror.l #1,d0 ; Prep next bit
|
||
dbra.w d1,@nextBit
|
||
nop
|
||
move (sp)+,sr ; restore the status register
|
||
rts ;
|
||
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Routine: VSCDelay8ms
|
||
;
|
||
; Inputs: a0 - Ptr to VIA1 base
|
||
;
|
||
; Outputs: none
|
||
;
|
||
; Destroys: d0
|
||
;
|
||
; Function: Delays around 8 us, for ensuring PLL is programmed correctly.
|
||
;---------------------------------------------------------------------
|
||
|
||
VSCDelay8ms
|
||
move.w TimeVIADB,d0
|
||
lsl.w #3,d0 ; 8 ms delay
|
||
@wait tst.b (a0)
|
||
dbra d0,@wait
|
||
rts
|
||
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Routine: VSCPowerDownPlanes
|
||
;
|
||
; Inputs: A3 = Ptr to private storage
|
||
;
|
||
; Outputs: none
|
||
;
|
||
; Destroys: none
|
||
;
|
||
; Function: Turns the power planes off for the video and kills the
|
||
; clocks into VSC.
|
||
;---------------------------------------------------------------------
|
||
|
||
With VSCVidPrivates
|
||
|
||
VSCPowerDownPlanes
|
||
|
||
move.b #-1,savePowerStatus(a3) ; set flag to power off state
|
||
|
||
Movea.l saveVideoBase(A3),A0 ; Point to VSC register base.
|
||
Movea.l saveAIV3Base(A3),A1 ; Point to AIV3 base address.
|
||
|
||
Move.w Sr,-(Sp) ; Save the status register.
|
||
Bsr VSCWaitVSync ; Wait for the next blanking period.
|
||
|
||
Clr.b VSC_VidCtrl(A0) ; Blank the display and turn off the dot-clock.
|
||
Bclr #VidPwrEn,AIV3PwrEn(A1) ; Now, pull the plug.
|
||
|
||
Move.w (Sp)+,Sr ; Restore the status register.
|
||
Rts ; And hike.
|
||
|
||
Endwith
|
||
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Routine: VSCInstallBusErrH
|
||
;
|
||
; Inputs: A2 = Ptr to cs parameter record
|
||
; A3 = Ptr to private storage
|
||
;
|
||
; Outputs: none
|
||
;
|
||
; Destroys: a0-a1/d0-d1
|
||
;
|
||
; Function: Install bus error handler so that when screen is
|
||
; powered off, framebuffer accesses don't halt the machine
|
||
;---------------------------------------------------------------------
|
||
VSCInstallBusErrH
|
||
bsr VSCSetSupervisorMode ; set unit in supervisor mode
|
||
move d0,-(sp) ; save current interrupt level
|
||
ori #HiIntMask,sr ; disable interrupts
|
||
movec vbr,a0 ; get system current vbr
|
||
move.l BusErrVct(a0),saveBusErrVect(a3); save that thing
|
||
lea SaveBusErr,a1 ; get pointer to local storage
|
||
move.l BusErrVct(a0),(a1) ; save that thing
|
||
|
||
Lea VSCValidCPUs,A1 ; Point to list of valid CPUs.
|
||
Moveq #0,D1 ; Clear D1 for good measure.
|
||
@CPULoop Move.w (A1)+,D1 ; Get next entry in list.
|
||
Cmp.b CPUFlag,D1 ; If the entry matches,
|
||
Beq.s @CalcOffset ; then get offset to handler.
|
||
Tst.w (A1)+ ; Skip this offset.
|
||
Bra.s @CPULoop ; Loop until match is found.
|
||
|
||
@CalcOffset Move.w (A1)+,D1 ; Get the offset to appropriate handler.
|
||
Lea VSCValidCPUs,A1 ; Point back to list of valid CPUs.
|
||
Adda.w D1,A1 ; Get address to handler into A1.
|
||
|
||
move.l a1,BusErrVct(a0) ; set bus err handler to our own
|
||
move (sp)+,sr ; restore interrupt states
|
||
rts
|
||
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Routine: VSCRestoreBusErrH
|
||
;
|
||
; Inputs: A2 = Ptr to cs parameter record
|
||
; A3 = Ptr to private storage
|
||
;
|
||
; Outputs: none
|
||
;
|
||
; Destroys: a0-a1/d0-d1
|
||
;
|
||
; Function: Removes bus error handler after screen is power up.
|
||
;---------------------------------------------------------------------
|
||
VSCRestoreBusErrH
|
||
bsr VSCSetSupervisorMode ; set unit in supervisor mode
|
||
move d0,-(sp) ; save current interrupt level
|
||
ori #HiIntMask,sr ; disable interrupts
|
||
movec vbr,a0 ; get system current vbr
|
||
move.l saveBusErrVect(a3),BusErrVct(a0); restore the system bus error handler
|
||
move (sp)+,sr ; restore interrupt states
|
||
rts
|
||
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Routine: VSCBusErrHandler030,VSCBusErrHandler040
|
||
;
|
||
; Inputs: none
|
||
;
|
||
; Outputs: none
|
||
;
|
||
; Destroys: none
|
||
;
|
||
; Function: bus error handler to prevent framebuffer accesses from halting
|
||
; the machine when screen is powered off.
|
||
;---------------------------------------------------------------------
|
||
|
||
VSCStckFrm3 RECORD 0
|
||
savereg DS.L 1 ; saved register on stack
|
||
;
|
||
statusreg DS.W 1 ; [00] status register
|
||
programCnt DS.L 1 ; [02] program counter
|
||
type DS.B 1 ; [06] format frame type
|
||
vectOff DS.B 1 ; [07] vector offset
|
||
IntReg DS.W 1 ; [08] Internal Register
|
||
ssw DS.W 1 ; [0A] special status register
|
||
InstPipe DS.L 1 ; [0C] Instruction Pipe
|
||
DFAddr DS.L 1 ; [10] data cycle fault address
|
||
IntReg2 DS.L 1 ; [14] more internal registers
|
||
DataOBuff DS.L 1 ; [18] data output buffer
|
||
IntReg3 DS.L 1 ; [1C] more internal registers
|
||
ShortBusSz EQU * ; [1E] size of short stack frame
|
||
IntReg4 DS.L 1 ; more internal registers
|
||
StageB DS.L 1 ; stage B address
|
||
IntReg5 DS.L 1 ; more internal registers
|
||
DataIBuf DS.L 1 ; Date Input Buffer
|
||
IntReg6 DS.W 3 ; more internal register
|
||
vers DS.B 1 ; version #
|
||
IntInfo DS.B 1 ; internal information
|
||
IntRegs7 DS.W 18 ; more internal register
|
||
LongBusSz EQU * ; size of long stact frame
|
||
ENDR
|
||
|
||
VSCStckFrm4 Record 0
|
||
savereg DS.L 1 ; saved register on stack
|
||
;
|
||
statusreg DS.W 1 ; [00] status register
|
||
programCnt DS.L 1 ; [02] program counter
|
||
type DS.B 1 ; [06] format frame type
|
||
vectOff DS.B 1 ; [07] vector offset
|
||
effectAddr DS.L 1 ; [08] effective address
|
||
ssw DS.W 1 ; [0C] special status register
|
||
writeBack3 DS.W 1 ; [0E] write-back 3 status
|
||
writeBack2 DS.W 1 ; [10] write-back 2 status
|
||
writeBack1 DS.W 1 ; [12] write-back 1 status
|
||
DFAddr DS.L 1 ; [14] fault address
|
||
wb3Addr DS.L 1 ; [18] write-back 3 address
|
||
wb3Data DS.L 1 ; [1C] write-back 3 data
|
||
wb2Addr DS.L 1 ; [20] write-back 2 address
|
||
wb2Data DS.L 1 ; [24] write-back 2 data
|
||
wb1Addr DS.L 1 ; [28] write-back 1 address
|
||
wb1Data DS.L 1 ; [2C] write-back 1 data
|
||
pdLW1 DS.L 1 ; [30] push data LW 1
|
||
pdLW2 DS.L 1 ; [34] push data LW 2
|
||
pdLW3 DS.L 1 ; [38] push data LW 3
|
||
Endr
|
||
|
||
VSCBusErrHandler030
|
||
WITH VSCStckFrm3
|
||
|
||
move.l d0,-(sp) ; save working register
|
||
move.w ssw(sp),d0 ; get special status register
|
||
btst #8,D0 ; IF Not DataFault THEN
|
||
beq.s RealBusEx ; can't handle this case - pass it on
|
||
|
||
move.b DFAddr(sp),D0 ; get high byte of data fault cycle address
|
||
cmp.b #$FF,D0 ; IF Slot F THEN
|
||
beq.s RealBusEx ; not supported by us
|
||
cmp.b #$FE,D0 ; IF less than Slot E THEN
|
||
blo.s RealBusEx ; not supported by us
|
||
|
||
; Have verified that a slot E access caused the bus error. Pop the exception
|
||
; stack frame and return.
|
||
|
||
move.w ssw(sp),d0 ; get special status register
|
||
and.w #%1100111011111111,d0 ; FC FB rc rb X X X df RM RW SIZE X FC2 FC1 FC0
|
||
move.w d0,ssw(sp) ; set SSW to not rerun cycle
|
||
move.l (sp)+,d0 ; restore reg d0
|
||
rte
|
||
|
||
ENDWITH
|
||
|
||
VSCBusErrHandler040
|
||
WITH VSCStckFrm4
|
||
|
||
move.l d0,-(sp) ; save working register
|
||
move.b DFAddr(sp),d0 ; get high byte of data fault cycle address
|
||
cmp.b #$FF,d0 ; IF Slot F THEN
|
||
beq.s RealBusEx ; not supported by us
|
||
cmp.b #$FE,d0 ; IF less than Slot E THEN
|
||
blo.s RealBusEx ; not supported by us
|
||
|
||
; Have verified that a slot E access caused the bus error. Pop the exception
|
||
; stack frame and return.
|
||
|
||
move.w writeBack3(sp),d0 ; get write-back 3 status
|
||
andi.w #$F7,d0 ; say its not valid
|
||
move.w writeBack2(sp),d0 ; get write-back 2 status
|
||
andi.w #$F7,d0 ; say its not valid
|
||
move.w writeBack1(sp),d0 ; get write-back 1 status
|
||
andi.w #$F7,d0 ; say its not valid
|
||
move.l (sp)+,d0 ; restore reg d0
|
||
rte
|
||
|
||
ENDWITH
|
||
|
||
; The bus exception was not caused by a access to framebuffer - pass the exception to the
|
||
; real bus exception handler.
|
||
|
||
RealBusEx move.l (sp)+,d0 ; restore reg D0
|
||
move.l SaveBusErr,-(sp) ; put saved bus exception vector on stack
|
||
rts ; jump to bus exception vector
|
||
|
||
SaveBusErr dc.l 1 ; our system bus err
|
||
|
||
|
||
;--------------------------------------------------------------------- <H6>
|
||
; |
|
||
; Routine: VSCInstallTTask v
|
||
;
|
||
; Inputs: A2 = Ptr to cs parameter record
|
||
; A3 = Ptr to private storage
|
||
;
|
||
; Outputs: none
|
||
;
|
||
; Destroys: a0,d0
|
||
;
|
||
; Function: Install timer task so that when screen dims, cursor
|
||
; movement will be acknowledged.
|
||
;---------------------------------------------------------------------
|
||
|
||
With VSCVidPrivates
|
||
|
||
VSCInstallTTask
|
||
lea VSCTimeMgrIH,a0 ; get a pointer to the interrupt simulation timer task
|
||
move.l a0,tmAddr+TTask(a3) ; put it in the time task
|
||
lea TTask(a3),a0 ; get a pointer to the timer queue element
|
||
move.l #'eada',(a0) ; Put in the magic signature to prevent VM from deferring us.
|
||
_InsXTime ; Install the task (fixed frequency).
|
||
Clr.w IntDisableFlag(A3) ; Tell the handler to keep the task going.
|
||
move.l a1,-(sp) ; jPrimeTime trashes A1
|
||
lea TTask(a3),a0 ; get time task block in A0
|
||
move.l #kVSCVBLTime,D0 ; delay for about 1/60th of a second
|
||
move.l jPrimeTime,a1 ; point straight at the Time Manager dispatch vector
|
||
jsr (a1) ; start the delay going
|
||
movea.l (sp)+,a1 ;
|
||
rts
|
||
|
||
Endwith
|
||
|
||
;---------------------------------------------------------------------
|
||
;
|
||
; Routine: VSCRemoveTTask
|
||
;
|
||
; Inputs: A2 = Ptr to cs parameter record
|
||
; A3 = Ptr to private storage
|
||
;
|
||
; Outputs: none
|
||
;
|
||
; Destroys: a0
|
||
;
|
||
; Function: Remove timer task after dimming.
|
||
;---------------------------------------------------------------------
|
||
|
||
With VSCVidPrivates
|
||
|
||
VSCRemoveTTask
|
||
lea TTask(a3),a0 ; get the time manager task block
|
||
_RmvTime
|
||
rts
|
||
|
||
Endwith
|
||
|
||
;-------------------------------------------------------------
|
||
; The Interrupt handler for the VSC Built-In Video
|
||
;-------------------------------------------------------------
|
||
; If using the Time Manager, on entry A1 points to the TTask block,
|
||
; otherwise A1 contains the pointer to the driver's private storage.
|
||
|
||
VSCTimeMgrIH
|
||
MOVE.L A1,-(SP) ; save A1 (it's trashed by JVBLTask)
|
||
|
||
Moveq #0,D0 ; Clear for byte-to-word access.
|
||
Move.b tmXQSize+2(A1),D0 ; get our slot # into D0
|
||
MOVE.L JVBLTask,A0 ; call the VBL task manager
|
||
JSR (A0) ; with slot # in D0
|
||
MOVEA.L (SP)+,A1 ; restore A1 (ptr to TTask block)
|
||
|
||
TST.W tmXQSize(A1) ; test the flag word to see if “interrupts” are on
|
||
; WARNING! - this field must be immediately after the TTask elem
|
||
BNE.S @Done ; if ≠ 0, then “interrupts” are disabled, so don't reprime
|
||
|
||
MOVEA.L A1,A0 ; get time task block addr in A0
|
||
MOVE.L #kVSCVBLTime,D0 ; delay for about 1/60th of a second
|
||
MOVE.L jPrimeTime,A1 ; point straight at the Time Manager dispatch vector
|
||
JSR (A1) ; start the delay going
|
||
@Done
|
||
RTS ; and return to caller
|
||
|
||
With VSCVidPrivates
|
||
|
||
VSCBeginIH
|
||
Moveq #0,D0 ; Clear out D0 here for a couple of reasons.
|
||
Movea.l saveAIV3Base(A1),A0 ; Get pointer to AIV3 base address.
|
||
btst #AnySlot,AIV3Int(a0) ; on-board video interrupting?
|
||
bne.s @VBLInt ; if interrupt pending, service it
|
||
@notOurs rts ; if not, return from the interrupt
|
||
|
||
@VBLInt btst #slotVBL,AIV3SlotInt(a0) ; is VBL pending?
|
||
bne.s @notOurs ; no, not ours, exit
|
||
|
||
Move.l A1,-(Sp) ; Save A1 (it’s trashed by jVBLTask).
|
||
Move.b saveSlot(A1),D0 ; Set up for our slot…
|
||
Jsr ([jVBLTask]) ; …and call the VBL Task Manager.
|
||
Movea.l (Sp)+,A1 ; Restore A1.
|
||
|
||
Movea.l saveVideoBase(A1),A0 ; Get the Video Reg base address.
|
||
clr.b VSC_IntClear(a0) ; Clear any pending interrupts.
|
||
|
||
@exit moveq #1,D0 ; signal that int was serviced
|
||
rts
|
||
|
||
Endwith
|