sys7.1-doc-wip/OS/IOPMgr.a
2019-07-27 22:37:48 +08:00

1463 lines
56 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

;__________________________________________________________________________________________________
;
; File: IOPMgr.a
;
; Contains: This module provides the message passing interface between the 680XX and the
; drivers running on the IOPs. It also provides the routines to download code
; and to initialize the IOPs.
;
; NOTE: The IOP hardware is called a "Peripheral Interface Controller" or "PIC",
; which can cause some confusion with other names already in the vocabulary
; of Macintosh developers ("PICT" for example), so from the software side,
; we will call them "Input / Output Processors" or "IOP" to avoid (or create)
; confusion.
;
; Written by: Gary G. Davidian
;
; Copyright © 1987-1993 by Apple Computer, Inc. All rights reserved.
;
; Change History (most recent first):
;
; <SM9> 11/10/93 KW fix localtalk for iop based machines on STP card use forSTP601v1
; <SM8> 11/9/93 KW BTU on the STP card doesn't handle bytereads very well so
; changed IOP stuff. Changes are only made when forSTP601=TRUE
; <SM7> 8/20/93 chp References to SCCIOPBypassInt have been resolved to the more
; general and historically accepted SccDecode entry point in
; InterruptHandlers.a. It wasn't necessary to have two names for
; the same thing.
; <SM6> 11/19/92 RB When looking for iop code, look in ROM first.
; <SM5> 9/10/92 kc Fix booting problem on Eclipse. (The last change was trashing a
; register in IOPInterrupt)
; <SM4> 6/11/92 PN Roll in Cmd-Shift-Esc patch from PatchIIci.a
; <SM3> 5/21/92 kc Append "Trap" to the names of Enqueue and Dequeue to avoid name
; conflict with the glue.
; <9> 4/27/92 JSM Get rid of conditionals: isUniversal, hasIOPSCC, and hasIOPSWIM
; are always true, left in the padForOverpatch conditional for
; now.
; <8> 12/30/91 RB Made a beq instruction use the long format in order to link. The
; SCCIOPByPassInt routine cannot be accessed with a 16 bit
; reference from ROM.
; <7> 10/1/91 JSM Dont use eclipseDebug.
; <6> 8/30/91 JSM Cleanup header.
; <5> 6/12/91 LN removed #include 'HardwareEqu.a'
; <4> 9/1/90 BG Added a check to leave Eclipses in Bypass Mode if we are running
; from RAM so that ReAnimator doesnt have its SCC communications
; path kicked out from under itself.
; <3> 1/11/90 CCH Added include of “HardwarePrivateEqu.a”.
; <2> 1/11/90 SWC Set the bypass mode bit in SCCIOPFlag if we can't put the SCC
; IOP into enhanced mode so that the serial and AppleTalk drivers
; will at least configure correctly. Changed the initialization of
; the SCC IOP SccIOCtlReg from $44 to $23 (per Bob Hollyer).
; <2.2> 12/1/89 GGD Cleaned up after BAD DOG (SWC), don't include Private.a twice,
; It was already included by Inc.Sum.a.
; <2.1> 12/1/89 SWC Oops! Forgot to INCLUDE Private.a since that's where SCCIOPFlag
; is defined.
; <2.0> 12/1/89 SWC Changed the polarity of the mode bit (0) in SCCIOPFlag so that a
; zero means we use IOP mode and a 1 means we use bypass so that
; if PRAM is reset, Zone 5 will use IOP mode as its default state.
; <1.9> 11/29/89 SWC Copied the PRAM byte controlling SCC IOP state to new low mem
; variable SCCIOPFlag ($BFE) so that we can change the PRAM value
; without hosing current IOP clients.
; <1.8> 11/2/89 GGD NEEDED FOR ZONE-5 Changed the rules pertaining to the usage of
; the IOP Ram Address Pointer register, The old convention was
; that interrupts could trash it, the new convention is that
; interrupts must save/restore it. Modified all routines to
; preserve it, and improved the cross processor data transfer
; performance by not having to mask interrupts and save/restore
; the addr reg within the xfer loop. Added Vectoring of the
; interrupt handler, and change internal calls of IOPMgr trap
; routines to jump through the OS Dispatch table, to make future
; patching easier.
; <1.7> 7/25/89 GGD Fixed interrupt masking bug in Deferred Task queueing which
; caused a circular queue if the SCC IOP interrupted the SWIM IOP
; interrupt processing at the wrong time. NEEDED FOR F19, Code
; size doesn't change.
; <1.6> 7/14/89 GGD Added conditionals around the overpatch padding so that it can
; be easily located. Turned off the Debugging VBL task. Improved
; the handling of interrupts from unknown IOPs to check for the
; SCC IOP, and pass the interrupt on to SCCIOPBypassInt if it was
; from the SCC.
; <1.5> 6/30/89 GGD Modified SCCIOPByPass to not hang waiting for a reply if the
; Send failed. Added padding in preparation for the F19 overpatch.
; <1.4> 5/29/89 GGD Added new routine SCCIOPHwInit which resets the SCC IOP, puts it
; into bypass mode, and initializes the IOControl register holdoff
; and wait delays.
; <1.3> 5/20/89 GGD Removed IOP register equates, and moved them into HardwareEqu,
; converted to use new names for registers and bits. Made the VBL
; debugging task support code conditionally assembly so that it
; can be easily turned off in the future. Re-wrote initialization
; code to make it universal.
; <1.2> 2/8/89 SGS Added support for SCC IOP
; <1.1> 11/10/88 CCH Fixed Header.
; <1.0> 11/9/88 CCH Adding to EASE.
; <1.1> 11/6/88 GGD Modified interrupt handler to allow for non-deferrable message
; handling (needed for MacsBug/ADB support). Fixed a few
; un-noticed bugs. Changed interrupt handler to service all
; interrupt sources before returning because on IoMac the SWIM IOP
; interrupt line is an edge-triggered VIA input and not a level
; triggered interrupt. Changed install IOP code to use
; _RGetResource to find the 'iopc' resource so that a system file
; can override it.
; <1.0> 10/7/88 rwh New to EASE today.
; 6/6/88 GGD Re-Written to allow queued xmt requests, and more flexible data
; structures to allow IOPs to be added dynamicaly.
; 7/31/87 GGD Created today.
;__________________________________________________________________________________________________
TITLE 'IOPmgr - Input / Output Processor Manager'
BLANKS ON
STRING ASIS
PRINT OFF
LOAD 'StandardEqu.d'
INCLUDE 'HardwarePrivateEqu.a'
INCLUDE 'UniversalEqu.a'
PRINT ON
INCLUDE 'IOPequ.a'
MACHINE MC68020
PRINT NOMDIR
macro
assert &boolExpr
if not(&Eval(&boolExpr)) then
aerror &concat('Assertion Failed - ',&boolExpr)
endif
endm
JIOPMoveData EQU ($88*4)+OSTable ; OS trap table entry for _IOPMoveData
Debugging equ 0 ; use debugging VBL task <1.3><1.6>
IOPPRAM equ $00000089 ; IOP PRAM index <1.2>
Active equ $FF ; dummy value for active
ReplyLen equ $01 ; bypass message reply length
MsgLen equ $03 ; bypass message length
KernMsg equ $01 ; kernel message box number
ByPassCmd equ $04 ; bypass command
MaxIOPRamAddr equ $7FFF ; IOP has 32KB RAM
IOPMsgPage equ $02
IOPXmtMsgBase equ $0200
IOPRcvMsgBase equ $0300
PatchReqAddr equ $021F ; Shared Loc to sync patching
IOPAliveAddr equ $031F ; IOP sets to $FF when idle
AliveVBLrate equ 127 ; 127 ticks = 2.1166666 seconds
; Message State encodings
MsgIdle equ 0 ; message buffer idle
NewMsgSent equ 1 ; new message just sent
MsgReceived equ 2 ; message received, and being processed
MsgCompleted equ 3 ; message processing complete, reply available
; Internal IOP Manager data structures (IOPmgrVars is the root pointer)
IOPMgrGlobals record {IOPInfoPtrs},increment ; miscellaneous globals used by the IOP manager
if Debugging then ; <1.3>
ds.w 1 ; force nice long word alignments
VTask ds.b vblPhase+2 ; Virtical Retrace Task info
endif ; <1.3>
DTask ds.b dtQElSize ; Deferred task Manager task info
ds.b 1 ; filler
DTaskQueued ds.b 1 ; $FF if task queued or running, $00 when done
CompleteQHdr ds.b qHeadSize ; queue of completed requests
IntHandlerPtr ds.l 1 ; [long] ptr to IOP interrupt handler
IOPInfoPtrs ds.l NumberOfIOPs ; [long] ptrs to IOP info for each IOP
IOPInfos ds.b 0 ; start of IOPInfo records for installed IOPs
GlobalsSize equ *-IOPMgrGlobals ; size of IOPMgrGlobals
endr
IOPmgr PROC EXPORT
EXPORT InitIOPMgr
EXPORT IOPInfoAccess
EXPORT IOPMsgRequest
EXPORT IOPMoveData
EXPORT IOPInterrupt
EXPORT MoveReqHandler
EXPORT SCCIOPByPass ;<1.2>
EXPORT SCCIOPHwInit ;<1.4>
IMPORT SccDecode
IMPORT EnqueueTrap
IMPORT DequeueTrap
TITLE 'IOPmgr - IOP Info Access'
;_______________________________________________________________________
;
; Routine: IOPInfoAccess
; Inputs: A0 - pointer to IOPAccessInfo paramater block
; Outputs: D0 - Result Code (NoErr/paramErr)
; Destroys: A0, A1, D0, D1, D2
; Calls: none
; Called by: OsTrap Dispatch Table
;
; Function: Performs various access operations on an IOP.
;
;_______________________________________________________________________
with IOPAccessInfo,IOPInfo,IOPRequestInfo,IOPMoveInfo
IOPInfoAccess ; a0-a1/d1-d2 saved by OsTrap dispatch
@SavedRegs reg a2-a4/d3-d4
movem.l @SavedRegs,-(sp) ; save registers
moveq.l #NoErr,d0 ; assume success
moveq.l #0,d1 ; zero extend
move.b iaAccessKind(a0),d1 ; get the access kind
cmpi.b #iaRemoveIOP,d1 ; range check it
bhi.s @paramError ; if out of range
move.w @JumpTable(d1.w*2),d2 ; get the routine offset
move.b iaIOPNumber(a0),d1 ; get the IOP number
cmpi.b #MaxIopNum,d1 ; range check it
bhi.s @paramError ; if out of range
lea ([IOPmgrVars],d1.w*4,\ ; a1 := pointer into IOPInfoPtrs table
IOPMgrGlobals.IOPInfoPtrs),a1
jmp @JumpTable(d2.w) ; process the request
@JumpTable assert iaInstallIOP=((*-@JumpTable)/2)
dc.w @InstallIOP-@JumpTable
assert iaGetIOPInfo=((*-@JumpTable)/2)
dc.w @GetIOPInfo-@JumpTable
assert iaRemoveIOP=((*-@JumpTable)/2)
dc.w @RemoveIOP-@JumpTable
@paramError moveq.l #paramErr,d0 ; indicate failure
bra.s @Done ; restore registers and return
@GetIOPInfo move.l (a1),iaIOPInfoPtr(a0) ; return the pointer to IOP Info
@Done movem.l (sp)+,@SavedRegs ; restore registers
rts ; and return
@RemoveIOP move.l (a1),iaIOPInfoPtr(a0) ; return the old pointer to IOP Info
clr.l (a1) ; and remove it from the table
bra.s @Done ; return with success
@InstallIOP tst.l (a1) ; see if it is already installed
bne.s @paramError ; if so, it's an error
movea.l iaIOPInfoPtr(a0),a4 ; save IOPInfo pointer
move.l d1,d3 ; save IOP number
subq.l #4,sp ; allocate function result
move.l #'iopc',-(sp) ; ResType = 'iopc' (IOP code)
move.w d3,-(sp) ; theID = IOP number
move.w #MapTrue,RomMapInsert ; look in ROM first <SM6> rb
_GetResource ; top of stack <- IOP code resource handle <SM6> rb
move.l (sp)+,d0 ; d0 <- resource handle
beq.s @paramError ; error if neither found
movea.l d0,a0 ; a0 <- resource handle
movea.l (a0),a0 ; a0 <- resource pointer
; Note that this routine will destroy the old contents of the IopAddrReg, but
; since we are also destroying all of it's RAM contents, it isn't worth the
; trouble to save it.
move.w sr,-(sp) ; save interrupt priority
ori.w #HiIntMask,sr ; disable interrupts
assert IopAddrRegPtr=0
movea.l (a4)+,a2 ; a2 <- IOP Ram Address Reg pointer
assert IopDataRegPtr=(IopAddrRegPtr+4)
movea.l (a4)+,a3 ; a3 <- IOP Ram Data Reg pointer
assert IopCtlRegPtr=(IopDataRegPtr+4)
movea.l (a4),a1 ; a1 <- IOP Status/Ctl Reg pointer
move.b #resetIopRun,(a1) ; init the Status/Ctl reg, hold IOP reset
; Fill all of IOP memory with $FF
move.w #MaxIOPRamAddr,d0 ; d0 <- fill addr / loop counter
moveq.l #-1,d1 ; d1 <- fill data ($FF)
@Fill_FF_Loop
move.w d0,(a2) ; load the address register
move.b d1,(a3) ; write the data to the data reg
dbra d0,@Fill_FF_Loop ; fill all of IOP memory with $FF
; Complement all of IOP memory. $FF -> $00
move.w #MaxIOPRamAddr,d0 ; d0 <- Complement addr / loop counter
@ComplementLoop move.w d0,(a2) ; load the address register
move.b (a3),d1 ; read the data byte
not.b d1 ; complement the data
move.w d0,(a2) ; reload the address register
move.b d1,(a3) ; write the data to the data reg
dbne d0,@ComplementLoop ; Complement all of IOP memory
bne.s @InitError ; if didn't read back $FF (HW error)
; Check all of IOP memory for $00
move.w #MaxIOPRamAddr,d0 ; d0 <- Check addr / loop counter
@Check_00_Loop move.w d0,(a2) ; load the address register
move.b (a3),d1 ; read the data byte
dbne d0,@Check_00_Loop ; Check all of IOP memory for $00
bne.s @InitError ; if didn't read back $00 (HW error)
; Download and Verify the IOP code
movea.l a0,a1 ; a1 <- copy of code start
@SegLoop move.b (a0)+,d0 ; get the size of the segment
beq.s @LoadDone ; size of zero terminates segment list
move.w (a0)+,(a2) ; setup the code load address
@LoadLoop move.b (a0)+,(a3) ; download a byte
subq.b #1,d0 ; decrement the loop count
bne.s @LoadLoop ; load all of the bytes
move.b (a1)+,d0 ; get size of the segment
move.w (a1)+,(a2) ; setup the code check address
@CheckCodeLoop move.b (a3),d1 ; read a byte from the IOP
IF forSTP601v1 THEN
subq.w #3, (a2) ;ZZZ
ENDIF
cmp.b (a1)+,d1 ; compare it to what was loaded
bne.s @InitError ; if download verify error (HW error)
subq.b #1,d0 ; decrement the loop count
bne.s @CheckCodeLoop ; check all of the bytes
bra.s @SegLoop ; load the next segment
@LoadDone
; Start IOP execution
move.w #IOPAliveAddr,(a2) ; Address the ALIVE flag
clr.b (a3) ; clear ALIVE
assert IopCtlRegPtr=(IopDataRegPtr+4)
movea.l (a4),a1 ; a1 <- IOP Status/Ctl Reg pointer
move.b #setIopRun,(a1) ; release IOP reset
moveq.l #-1,d0 ; timeout loop counter
@AliveWaitLoop
move.w #IOPAliveAddr,(a2) ; Address the ALIVE flag
cmpi.b #$FF,(a3) ; check for alive
dbeq d0,@AliveWaitLoop ; loop until alive
beq.s @Alive ; error if time out (HW error)
@InitError move.w (sp)+,sr ; restore interrupt priority
bra.w @paramError ; return with error
@Alive
; Update the Max Xmt / Rcv messages supported
move.w #IOPXmtMsgBase,(a2) ; address Xmt MAX
addq.l #MaxXmt-IopCtlRegPtr,a4 ; point to MaxXmt in IOPInfo
move.b (a3),(a4)+ ; get the Xmt MAX
move.w #IOPRcvMsgBase,(a2) ; address Rcv MAX
assert MaxRcv=(MaxXmt+1)
move.b (a3),(a4) ; get the Rcv MAX
suba.w #MaxRcv,a4 ; point to start of IOPInfo record
move.l a4,([IOPmgrVars],d3.w*4,\ ; install pointer into IOPInfoPtrs table
IOPMgrGlobals.IOPInfoPtrs)
lea MoveReqInfo(a4),a0 ; a0 := pointer to IOPRequestInfo
lea irIOPNumber(a0),a1 ; a1 := initialization pointer
move.b d3,(a1)+ ; initialize the irIOPNumber field
assert irRequestKind=(irIOPNumber+1)
move.b #irWaitRcvMessage,(a1)+ ; initialize the irRequestKind field
assert irMsgNumber=(irRequestKind+1)
assert irMessageLen=(irMsgNumber+1)
assert irReplyLen=(irMessageLen+1)
assert irReqActive=(irReplyLen+1)
move.l #(1<<24)+\ ; irMsgNumber := 1
(imMoveInfoSize<<16)+\ ; irMessageLen := imMoveInfoSize
(imMoveInfoSize<<8)+\ ; irReplyLen := imMoveInfoSize
(0),(a1)+ ; irReqActive := 0
lea MoveReqBuffer(a4),a2 ; a2 := pointer to IOPMoveInfo
assert irMessagePtr=(irReqActive+1)
move.l a2,(a1)+ ; irMessagePtr := MoveReqBuffer
assert irReplyPtr=(irMessagePtr+4)
move.l a2,(a1)+ ; irReplyPtr := MoveReqBuffer
lea MoveReqHandler,a2 ; a2 := completion routine address
assert irHandler=(irReplyPtr+4)
move.l a2,(a1)+ ; irHandler := MoveReqHandler
_IOPMsgRequest ; install the message handler
move.w (sp)+,sr ; restore interrupt priority
bra.w @Done ; return with success
endwith
TITLE 'IOPmgr - IOP Message Request'
;_______________________________________________________________________
;
; Routine: IOPMsgRequest
; Inputs: A0 - pointer to IOPRequestInfo paramater block
; Outputs: D0 - Result Code (NoErr/paramErr)
; irReqActive - set to $FF, until request completed
; Destroys: A0, A1, D0, D1, D2
; Calls: CopyToIOP, Enqueue
; Called by: OsTrap Dispatch Table
;
; Function:
;
;_______________________________________________________________________
with IOPRequestInfo
IOPMsgRequest
@SavedRegs reg a2/a3/d3/d4 ; a0-a1/d1-d2 saved by OsTrap dispatch
movem.l @SavedRegs,-(sp) ; save registers
moveq.l #paramErr,d0 ; assume Parameter Error status
moveq.l #0,d2 ; prepare to zero extend
lea irIOPNumber(a0),a1 ; a1 <- pointer to parameters
move.b (a1)+,d2 ; d2 <- zero extended IOP number
cmpi.w #MaxIopNum,d2 ; range check the iop number
bhi.s @toParamError ; if out of range
movea.l IOPmgrVars,a2 ; get message table base
movea.l IOPMgrGlobals.IOPInfoPtrs(a2,d2.w*4),a2 ; a2 <- iop info ptr
move.l a2,d3 ; test for zero
beq.s @toParamError ; IOP isn't initialized
move.b IOPInfo.MaxXmt(a2),d3 ; d3 := max message number
assert irRequestKind=(irIOPNumber+1)
move.b (a1)+,d2 ; d2 <- zero extended request Kind
assert irSendXmtMessage=0
beq.s @CheckReqKind ; if for Xmt Msg, max is correct
move.b IOPInfo.MaxRcv(a2),d3 ; d3 := max message number
@CheckReqKind
cmpi.w #irRemoveRcvWaiter,d2 ; range check the request Kind
bhi.s @toParamError ; if out of range
move.w @JumpTable(d2.w*2),d1 ; d1 := offset to routine
assert irMsgNumber=(irRequestKind+1)
move.b (a1)+,d2 ; d2 <- zero extended Msg number
beq.s @paramError ; Message zero is reserved
cmp.b d3,d2 ; compare to max
bhi.s @paramError ; if out of range
move.w d2,d3 ; d3.w := iop state address
assert IOPMsgEntry.IOPMsgEntrySize=(1<<4)
lsl.w #4,d2 ; d2 := index into MsgTable
moveq.l #MaxIopMsgLen,d4 ; prepare to check message lengths
assert irMessageLen=(irMsgNumber+1)
cmp.b (a1)+,d4 ; check the message length
blo.s @paramError ; if out of range
assert irReplyLen=(irMessageLen+1)
cmp.b (a1)+,d4 ; check the reply length
blo.s @paramError ; if out of range
lea IOPInfo.MsgTable+IOPMsgEntry.RcvMsgInfoPtr(a2,d2.w),a3
jmp @JumpTable(d1.w) ; process the request
@JumpTable assert irSendXmtMessage=((*-@JumpTable)/2)
dc.w @SendXmtMessage-@JumpTable
assert irSendRcvReply=((*-@JumpTable)/2)
dc.w @SendRcvReply-@JumpTable
assert irWaitRcvMessage=((*-@JumpTable)/2)
dc.w @WaitRcvMessage-@JumpTable
assert irRemoveRcvWaiter=((*-@JumpTable)/2)
dc.w @RemoveRcvWaiter-@JumpTable
@toParamError
bra.s @paramError ; allow short branches
@SendXmtMessage
assert irReqActive=(irReplyLen+1)
st (a1) ; mark it as active now
lea IOPMsgEntry.XmtMsgQHdr-IOPMsgEntry.RcvMsgInfoPtr(a3),a1
move.w sr,d2 ; d2 := saved interrupt priority
ori.w #HiIntMask,sr ; no interrupts while checking queue
cmpa.l qHead(a1),a0 ; see if already the head of the queue
beq.s @SkipEnqueue ; if so, don't enqueue it
jsr EnqueueTrap ; enqueue the request
cmpa.l qHead(a1),a0 ; see if at the head of the queue
bne.s @notAtHead ; exit with request queued
@SkipEnqueue
move.w d2,sr ; restore interrupt priority
moveq.l #0,d0 ; zero extend message length
move.b irMessageLen(a0),d0 ; get the message buffer length
movea.l irMessagePtr(a0),a1 ; get the message buffer pointer
move.b #NewMsgSent,-(sp) ; save new message state
ori.w #IOPXmtMsgBase,d3 ; d3 := iop message state address
@SendAndInterrupt
move.w d3,-(sp) ; save state address for later
assert MaxIOPMsgLen=(1<<5)
lsl.b #5,d3 ; d3 := iop message address
move.l IOPInfo.IopCtlRegPtr(a2),-(sp) ; save ctl/status reg ptr for later
movea.l IOPInfo.IopDataRegPtr(a2),a3 ; (a3) := IOPRamDataReg
movea.l IOPInfo.IopAddrRegPtr(a2),a2 ; (a2) := IOPRamAddrReg
move.w (a2),-(sp) ; save the IOPRamAddrReg
move.w d3,(a2) ; setup iop ram address
bsr.w CopyToIop ; copy the message to the IOP
move.w (sp)+,d0 ; get the saved IOPRamAddrReg
movea.l (sp)+,a1 ; (a1) := IopCtlReg
move.w (sp)+,(a2) ; setup iop ram address of message state
move.b (sp)+,(a3) ; set new state
move.w d0,(a2) ; restore the IOPRamAddrReg
move.b #setIopGenInt,(a1) ; interrupt the IOP
@success moveq.l #noErr,d0 ; report success
@paramError movem.l (sp)+,@SavedRegs
rts ; all done
@notAtHead move.w d2,sr ; restore interrupt priority
bra.s @success ; return with success
@SendRcvReply
cmpa.l (a3),a0 ; see if we are the waiter
bne.s @paramError ; return with error if not
assert irReqActive=(irReplyLen+1)
tst.b (a1) ; see if the request is already active
bne.s @paramError ; return with error if active
st (a1) ; mark it as active now
moveq.l #0,d0 ; zero extend reply length
move.b irReplyLen(a0),d0 ; get the reply buffer length
movea.l irReplyPtr(a0),a1 ; get the reply buffer pointer
move.b #MsgCompleted,-(sp) ; save new message state
ori.w #IOPRcvMsgBase,d3 ; d3 := iop message state address
bra.s @SendAndInterrupt ; send the reply and interrupt the IOP
@WaitRcvMessage
tst.l (a3) ; see if waiter already exists
bne.s @paramError ; return with error if so
assert irReqActive=(irReplyLen+1)
st (a1) ; mark the request as active
move.l a0,(a3) ; setup waiter
bra.s @success ; return with success
@RemoveRcvWaiter
cmpa.l (a3),a0 ; see if we are the waiter
bne.s @paramError ; return with error if not
assert irReqActive=(irReplyLen+1)
clr.b (a1) ; mark the request as complete
clr.l (a3) ; setup waiter
bra.s @success ; return with success
endwith
TITLE 'IOPmgr - IOP Move Data'
;_______________________________________________________________________
;
; Routine: IOPMoveData
; Inputs: A0 - pointer to IOPMoveInfo paramater block
; Outputs: D0 - Result Code (NoErr/paramErr)
; Destroys: A0, A1, D0, D1, D2
; Calls: CopyToIOP, CopyFromIOP, CompareWithIop
; Called by: OsTrap Dispatch Table
;
; Function: Moves, or compares data between the IOP and the Host
; memories, using the parameters inthe IOPMoveInfo parameter
; block. Also has a special mode to apply patches to IOP
; memory as an atomic operation.
;
;_______________________________________________________________________
with IOPMoveInfo
IOPMoveData
@SavedRegs reg a2/a3 ; a0-a1/d1-d2 saved by OsTrap dispatch
movem.l @SavedRegs,-(sp) ; save registers
moveq.l #paramErr,d0 ; assume Parameter Error status
moveq.l #0,d2 ; prepare to zero extend
assert imCopyKind=0
move.b (a0)+,d2 ; d2 <- zero extended Copy Kind
cmpi.w #imPatchIop,d2 ; range check the copy kind
bhi.s @paramError ; if out of range
move.w @JumpTable(d2.w*2),d1 ; d1 := offset to copy routine
assert imIOPNumber=(imCopyKind+1)
move.b (a0)+,d2 ; d2 <- zero extended IOP number
cmpi.w #MaxIopNum,d2 ; range check the iop number
bhi.s @paramError ; if out of range
movea.l IOPmgrVars,a1 ; get message table base
movea.l IOPMgrGlobals.IOPInfoPtrs(a1,d2.w*4),a2 ; get iop info base address
move.l a2,d2 ; test for zero
beq.s @paramError ; IOP isn't initialized
movea.l IOPInfo.IopDataRegPtr(a2),a3 ; (a3) := IOPRamDataReg
movea.l IOPInfo.IopAddrRegPtr(a2),a2 ; (a2) := IOPRamAddrReg
moveq.l #0,d0 ; zero extend to long
assert imByteCount=(imIOPNumber+1)
move.w (a0)+,d0 ; d0 := byte count
assert imHostAddr=(imByteCount+2)
movea.l (a0)+,a1 ; a1 := host buffer address
move.w (a2),-(sp) ; save the IOPRamAddrReg
assert imIopAddr=(imHostAddr+4)
move.w (a0)+,(a2) ; setup iop ram address
assert imCompRel=(imIopAddr+2) ; a0 pointer to imCompRel for CompareWithIop
jsr @JumpTable(d1.w) ; do the copy
move.w (sp)+,(a2) ; restore the IOPRamAddrReg
moveq.l #noErr,d0 ; return No Error status
@paramError
@return movem.l (sp)+,@SavedRegs ; restore registers
rts
@JumpTable assert imIopToHost=((*-@JumpTable)/2)
dc.w CopyFromIop-@JumpTable
assert imHostToIop=((*-@JumpTable)/2)
dc.w CopyToIop-@JumpTable
assert imCompare=((*-@JumpTable)/2)
dc.w CompareWithIop-@JumpTable
assert imPatchIop=((*-@JumpTable)/2)
dc.w @Patch-@JumpTable
@Patch move.w sr,d2 ; d2 := saved interrupt priority
ori.w #HiIntMask,sr ; disable interrupts
move.w #PatchReqAddr,d1 ; address of Patch Request Byte
move.w d1,(a2) ; setup the IOP address
moveq.l #NewMsgSent,d0 ; patch request state byte
move.b d0,(a3) ; issue the patch request
@PatchSync move.w d1,(a2) ; setup the IOP address
cmp.b (a3),d0 ; see if patch request was accepted
beq.s @PatchSync ; wait until it is accepted
@PatchSegLoop
move.b (a1)+,d0 ; get the size of the segment
beq.s @PatchDone ; size of zero terminates segment list
move.w (a1)+,(a2) ; setup the patch load address
@PatchLoadLoop
move.b (a1)+,(a3) ; patch a byte
subq.b #1,d0 ; decrement the loop count
bne.s @PatchLoadLoop ; load all of the bytes
bra.s @PatchSegLoop ; load the next segment
@PatchDone move.w d1,(a2) ; setup the IOP address
move.b #MsgIdle,(a3) ; tell the IOP that patching is done
move.w d2,sr ; restore interrupt priority
rts ; patching is complete
endwith
TITLE 'IOPmgr - Copy From IOP'
;_______________________________________________________________________
;
; Routine: CopyFromIop
; Inputs: A1 - pointer to Host RAM buffer (dest addr)
; A2 - pointer to IOPRamAddrReg
; (A2) - IOP data address (source addr)
; A3 - pointer to IOPRamDataReg
; D0 - (word) transfer byte count (zero extended to long)
; Outputs: none
; Destroys: A1, D0, D1
; Calls: none
; Called by: IOPInterrupt, IOPMoveData
;
; Function: Moves data from the IOP to the Host memory.
;
;_______________________________________________________________________
CopyFromIop cmpi.w #3,d0 ; check for very short copy
bls.s @veryShort ; skip alignment if very short
move.l a1,d1 ; get the Host Address
andi.w #$0003,d1 ; check for long word alignment
beq.s @Aligned ; if no alignment needed
subq.w #4,d1 ; get byte count bias
add.w d1,d0 ; adjust the byte count
IF forSTP601v1 THEN
jmp @Aligned(d1.w*4) ; ZZZdo the alignment
ELSE
jmp @Aligned(d1.w*2) ; do the alignment
ENDIF
move.b (a3),(a1)+ ; move a byte
IF forSTP601v1 THEN
subq.w #3, (a2) ;ZZZ
move.b (a3),(a1)+ ; move a byte
subq.w #3, (a2) ;ZZZ
move.b (a3),(a1)+ ; move a byte
subq.w #3, (a2) ;ZZZ
ELSE
move.b (a3),(a1)+ ; move a byte
move.b (a3),(a1)+ ; move a byte
ENDIF
@Aligned ror.l #2,d0 ; save tail byte count in high 2 bits
moveq.l #7,d1 ; mask for starting index
and.w d0,d1 ; number of long words to move first
neg.w d1 ; negate to index backwards
lsr.w #3,d0 ; number of 32 byte blocks to move
jmp @CopyStart(d1.w*2) ; jump into the loop
@CopyLoop move.l (a3),(a1)+ ; move a 32 byte block of data....
move.l (a3),(a1)+ ; ... 4 bytes at a time
move.l (a3),(a1)+
move.l (a3),(a1)+
move.l (a3),(a1)+
move.l (a3),(a1)+
move.l (a3),(a1)+
move.l (a3),(a1)+
@CopyStart dbra d0,@CopyLoop ; loop through all of the blocks
add.l d0,d0 ; load c and n with remaining 2 bits
bcs.s @Copy2or3bytes
@Copy0or1byte
bpl.s @exit ; if no bytes left
move.b (a3),(a1) ; copy the last byte
IF forSTP601v1 THEN
subq.w #3, (a2) ;ZZZ
ENDIF
@exit rts ; all done
@veryShort roxr.l #2,d0 ; load c and n with remaining 2 bits
bcc.s @Copy0or1byte
@Copy2or3bytes
bpl.s @Copy2bytes ; if only 2 bytes left
move.b (a3),(a1)+ ; copy 1 byte, 2 still remaining
IF forSTP601v1 THEN
subq.w #3, (a2) ;ZZZ
ENDIF
@Copy2bytes move.w (a3),(a1) ; copy the last 2 bytes
IF forSTP601v1 THEN
subq.w #2, (a2) ;ZZZ
ENDIF
rts ; all done
TITLE 'IOPmgr - Copy To IOP'
;_______________________________________________________________________
;
; Routine: CopyToIop
; Inputs: A1 - pointer to Host RAM buffer (source addr)
; A2 - pointer to IOPRamAddrReg
; (A2) - IOP data address (dest addr)
; A3 - pointer to IOPRamDataReg
; D0 - (word) transfer byte count (zero extended to long)
; Outputs: none
; Destroys: A1, D0, D1
; Calls: none
; Called by: IOPMsgAccess, IOPMoveData
;
; Function: Moves data from the Host to the IOP memory.
;
;_______________________________________________________________________
CopyToIop cmpi.w #3,d0 ; check for very short copy
bls.s @veryShort ; skip alignment if very short
move.l a1,d1 ; get the Host Address
andi.w #$0003,d1 ; check for long word alignment
beq.s @Aligned ; if no alignment needed
subq.w #4,d1 ; get byte count bias
add.w d1,d0 ; adjust the byte count
jmp @Aligned(d1.w*2) ; do the alignment
move.b (a1)+,(a3) ; move a byte
move.b (a1)+,(a3) ; move a byte
move.b (a1)+,(a3) ; move a byte
@Aligned ror.l #2,d0 ; save tail byte count in high 2 bits
moveq.l #7,d1 ; mask for starting index
and.w d0,d1 ; number of long words to move first
neg.w d1 ; negate to index backwards
lsr.w #3,d0 ; number of 32 byte blocks to move
jmp @CopyStart(d1.w*2) ; jump into the loop
@CopyLoop move.l (a1)+,(a3) ; move a 32 byte block of data....
move.l (a1)+,(a3) ; ... 4 bytes at a time
move.l (a1)+,(a3)
move.l (a1)+,(a3)
move.l (a1)+,(a3)
move.l (a1)+,(a3)
move.l (a1)+,(a3)
move.l (a1)+,(a3)
@CopyStart dbra d0,@CopyLoop ; loop through all of the blocks
add.l d0,d0 ; load c and n with remaining 2 bits
bcs.s @Copy2or3bytes
@Copy0or1byte
bpl.s @exit ; if no bytes left
move.b (a1),(a3) ; copy the last byte
@exit rts ; all done
@veryShort roxr.l #2,d0 ; load c and n with remaining 2 bits
bcc.s @Copy0or1byte
@Copy2or3bytes
bpl.s @Copy2bytes ; if only 2 bytes left
move.b (a1)+,(a3) ; copy 1 byte, 2 still remaining
@Copy2bytes move.w (a1),(a3) ; copy the last 2 bytes
rts ; all done
TITLE 'IOPmgr - Compare With IOP'
;_______________________________________________________________________
;
; Routine: CompareWithIop
; Inputs: A0 - pointer to imCompRel byte (result addr)
; A1 - pointer to Host RAM buffer (dest addr)
; A2 - pointer to IOPRamAddrReg
; (A2) - IOP data address (source addr)
; A3 - pointer to IOPRamDataReg
; D0 - (word) transfer byte count (zero extended to long)
; Outputs: none
; Destroys: A1, D0, D1, D2
; Calls: none
; Called by: IOPMoveData
;
; Function: Compares data from the IOP to the Host memory.
;
;_______________________________________________________________________
CompareWithIop
cmpi.w #3,d0 ; check for very short compare
bls.s @Aligned ; skip alignment if very short
move.l a1,d1 ; get the Host Address
andi.w #$0003,d1 ; check for long word alignment
beq.s @Aligned ; if no alignment needed
subq.w #4,d1 ; get byte count bias
add.w d1,d0 ; adjust the byte count
not.w d1 ; setup count for DBNE
@AlignLoop move.b (a3),d2 ; get byte of data from IOP
IF forSTP601v1 THEN
subq.w #3, (a2) ;ZZZ
ENDIF
cmp.b (a1)+,d2 ; compare to HOST data
dbne d1,@AlignLoop ; loop until longword aligned
bne.s @NotEqual ; exit if didn't compare
@Aligned moveq.l #3,d1 ; mask for byte remainder
and.w d0,d1 ; number of tail bytes to compare
lsr.w #2,d0 ; number of long words to compare
beq.s @TailStart ; if no longs, start with tail
subq.w #1,d0 ; adjust loop count for DBNE
@CmpLoop move.l (a3),d2 ; get long word of data from IOP
cmp.l (a1)+,d2 ; compare to HOST data
dbne d0,@CmpLoop ; loop through all long words
bra.s @TailStart ; then compare the remaining bytes
@TailLoop move.b (a3),d2 ; get byte of data from IOP
IF forSTP601v1 THEN
subq.w #3, (a2) ;ZZZ
ENDIF
cmp.b (a1)+,d2 ; compare to HOST data
@TailStart dbne d1,@TailLoop ; loop through all remaining bytes
@NotEqual sne.b (a0) ; return -1 if IOP < HOST
bls.s @Exit ; return 0 if IOP = HOST
neg.b (a0) ; return +1 if IOP > HOST
@Exit rts
TITLE 'IOPmgr - IOP Interrupt'
;_______________________________________________________________________
;
; Routine: IOPInterrupt
; Inputs: D0{31…24} - flags indicating non-deferrable XMT messages
; D0{23…16} - flags indicating non-deferrable RCV messages
; D0{15…8} - must be zero
; D0{7…0} - IOP number of IOP requesting the interrupt
; Outputs: none
; Destroys: A0, A1, A2, A3, D0, D1, D2, D3
; Calls: DTInstall, IOP message Handler
; Called by: System interrupt handler
;
; Function: Services interrupts from the IOPs. Acknowledges the messages,
; and calls the message handlers directly, or schedules a
; deferred task manager task to call them, if they were
; deferrable handlers. If the interrupt was a Bypass Interrupt
; Request, it will reset the interrupt and JMP to the external
; label IOPBypassInterrupt passing the IOP number that generated
; the interrupt in register D0.
;
;_______________________________________________________________________
with IOPMgrGlobals,IOPInfo
IOPInterrupt ; a0-a3/d0-d3 saved by int handler
movea.l IOPmgrVars,a0 ; point to globals
jmp ([IntHandlerPtr,a0]) ; jump through the patch vector
vIOPInterrupt
move.l IOPInfoPtrs(a0,d0.w*4),d1
beq.s @noIop ; ignore if IOP doesn't exist
movea.l d1,a0 ; a0 := pointer to IOPInfo
assert IopAddrRegPtr=0
movea.l (a0)+,a2 ; a2 := pointer to IOP Ram addr reg
assert IopDataRegPtr=(IopAddrRegPtr+4)
movea.l (a0)+,a3 ; a3 := pointer to IOP Ram data reg
move.w sr,d2 ; save old interrupt level
move.b d0,d2 ; save the IOP number, overwrite saved ccr
move.l a0,-(sp) ; save reg for msg handler to restore
@checkAgain
assert IopCtlRegPtr=(IopDataRegPtr+4)
movea.l (a0)+,a1 ; a1 := pointer to IOP control reg
move.b (a1),d1 ; get the control register
lsr.b #iopInt0Active+1,d1 ; test INT0 (xmt MessageCompleted)
bcs.s @xmtComp ; handle INT0
lsr.b #iopInt1Active-iopInt0Active,d1 ; test INT1 (rcv NewMessageSent)
bcs.s @rcvNew ; handle INT1
lsr.b #iopBypassIntReq-iopInt1Active,d1 ; test BypassIntReq
bcs.s @bypassInt ; all done if not bypass interrupt
@IntHandled move.w d2,sr ; restore interrupt level
addq.l #4,sp ; pop saved a0
lsr.l #8,d0 ; test the flags
bne.w @RunNonDeferrable ; if non-deferrables, go check for and run them
rts ; return from the interrupt <1.6>
@noIop cmpi.w #SccIopNum,d0 ; see if it was from the SCC <1.6>
beq.l SccDecode ; if so, pass it on to the Bypass handler <1.6> <8> rb
rts ; return from the interrupt <1.6>
@bypassInt
assert BypassHandler=(IopCtlRegPtr+4)
move.l (a0),d1 ; get address of bypass int handler
beq.s @IntHandled ; no bypass handler, not much we can do
move.w d2,sr ; restore interrupt level
move.l d0,(sp) ; save the flags/iop number
movea.l d1,a0 ; setup handler address
jsr (a0) ; call the ByPass interrupt handler
move.l (sp)+,d0 ; restore flags/IOP number
bra.s IOPInterrupt ; check again for other interrupts
@rcvNew move.b #clrIopInt1,(a1) ; clear the interrupt
move.w #(MsgReceived<<8)+\ ; new state
(NewMsgSent<<0),d1 ; state to search for
move.w #IOPRcvMsgBase+1,d3 ; IOP address to start search at
lea @rcvFound,a1 ; a1 := rcv found routine
assert BypassHandler=(IopCtlRegPtr+4)
move.b MaxRcv-BypassHandler(a0),d0 ; get message count
adda.w #MsgTable-BypassHandler,a0 ; point before the first message
move.w (a2),-(sp) ; save the IOPRamAddrReg
bra.s @SearchStart ; start searching the message states
@xmtComp move.b #clrIopInt0,(a1) ; clear the interrupt
moveq.l #(MsgIdle<<8)+\ ; new state
(MsgCompleted<<0),d1 ; state to search for
move.w #IOPXmtMsgBase+1,d3 ; IOP address to start search at
lea @xmtFound,a1 ; a1 := xmt done routine
assert BypassHandler=(IopCtlRegPtr+4)
move.b MaxXmt-BypassHandler(a0),d0 ; get message count
adda.w #MsgTable-BypassHandler,a0 ; point before the first message
move.w (a2),-(sp) ; save the IOPRamAddrReg
bra.s @SearchStart ; start searching the message states
@searchLoop adda.w #IOPMsgEntry.IOPMsgEntrySize,a0 ; point to next message info
cmp.b (a3),d1 ; check for state match
IF forSTP601v1 THEN
move ccr, -(sp) ;ZZZ
subq.w #3, (a2) ;ZZZ
move (sp)+, ccr ;ZZZ
ENDIF
dbeq d0,@searchLoop ; loop until match or end of list
bne.s @searchDone ; if all message states checked
move.w (a2),d3 ; get the address pointer
@MsgRegs reg a0/a1/d0/d1/d2/d3 ; registers to save when servicing message
movem.l @MsgRegs,-(sp) ; save the registers
subq.w #1,d3 ; point to the message state that was found
move.w d3,(a2) ; re-load ram address pointer
lsr.w #8,d1 ; get the new message state
move.b d1,(a3) ; set the new message state
move.w d2,sr ; give higher priority ints a chance
jsr (a1) ; call the xmt/rcv found routine
movem.l (sp)+,@MsgRegs ; restore the registers
@SearchStart
ori.w #HiIntMask,sr ; disable all interrupts
move.w d3,(a2) ; restore the address pointer
dbra d0,@searchLoop ; loop until end of list
@searchDone move.w (sp)+,(a2) ; restore the IOPRamAddrReg
clr.w d0 ; setup for zero extended IOP number
move.b d2,d0 ; flags in high word, IOP number in low word
movea.l IOPmgrVars,a1
tst.b DTaskQueued(a1)
bne.s @toCkAgain ; if already queued, just return
tst.l CompleteQHdr+qHead(a1)
beq.s @toCkAgain ; if nothing queued, just return
st DTaskQueued(a1)
lea DTask(a1),a0
@DTaskRegs reg a2/d0/d2 ; regs to save when queueing a deferred task
movem.l @DTaskRegs,-(sp) ; save regs
jsr ([jDTInstall]) ; queue the deferred task
movem.l (sp)+,@DTaskRegs ; restore regs
@toCkAgain move.w d2,sr ; give higher priority ints a chance <1.7>
movea.l (sp),a0 ; setup a0 for entry at @checkAgain
bra.w @checkAgain ; return from the interrupt <1.7>
@XmtFound lea IOPMsgEntry.XmtMsgQHdr+qHead(a0),a1 ; point to request info
move.l (a1),d1 ; get request info
beq.s @empty ; if no handler installed
move.l a1,-(sp) ; save message entry pointer
movea.l d1,a0 ; setup request info address
subq.l #qHead,a1 ; point to queue header
jsr DequeueTrap ; remove it from the msg queue
movea.l IOPRequestInfo.irReplyPtr(a0),a1 ; get the buffer address
moveq.l #0,d0 ; zero extend the reply byte count
move.b IOPRequestInfo.irReplyLen(a0),d0 ; get the byte count
bsr.s @CopyAndQueue ; read the reply and queue it
movea.l (sp)+,a1 ; point to message queue head
move.l (a1),d1 ; get head of queue
beq.s @empty ; if empty, do nothing
movea.l d1,a0 ; setup to send the queued message
jmp ([JIOPMsgRequest]) ; send the next message and return
@empty rts
@RcvFound move.l IOPMsgEntry.RcvMsgInfoPtr(a0),d1 ; get request info
beq.s @empty ; if no handler installed
movea.l d1,a0 ; setup request info address
movea.l IOPRequestInfo.irMessagePtr(a0),a1 ; get the buffer address
moveq.l #0,d0 ; zero extend the message byte count
move.b IOPRequestInfo.irMessageLen(a0),d0 ; get the byte count
@CopyAndQueue
beq.s @CopyDone ; if no message data to copy
move.w d3,d1 ; get copy of message state address
assert MaxIOPMsgLen=(1<<5)
lsl.b #5,d1 ; convert to message data address
move.w d1,(a2) ; point to the message
bsr.w CopyFromIop ; read the message
@CopyDone movea.l IOPmgrVars,a1 ; point to globals
adda.w #CompleteQHdr,a1 ; point to the completion queue
tst.l IOPRequestInfo.irHandler(a0) ; check the handler address
beq.s @NoHandler ; if no handler, don't enqueue it
jmp EnqueueTrap ; enqueue the completed request, and return
@NoHandler clr.b IOPRequestInfo.irReqActive(a0) ; indicate that it is done
rts ; return
@RunNonDeferrable
move.l d0,d3 ; save the flags
lsr.l #8,d3 ; get flags into low 2 bytes
movea.l IOPmgrVars,a1 ; get the globals
lea CompleteQHdr(a1),a1 ; point to the completion queue
lea qHead-qLink(a1),a0 ; point to ptr to first element
ori.w #HiIntMask,sr ; disable all ints while touching queue
@RunLoop move.l qLink(a0),d0 ; get ptr to next element
beq.s @RunDone ; if end of queue, we're done
movea.l d0,a0 ; setup queue element pointer
cmp.b IOPRequestInfo.irIOPNumber(a0),d2 ; is it for this IOP
bne.s @RunLoop ; if not, go on to next one
move.b IOPRequestInfo.irMsgNumber(a0),d0 ; get the message number
assert IOPRequestInfo.irSendXmtMessage=0
tst.b IOPRequestInfo.irRequestKind(a0) ; test for xmt/rcv
bne.s @ChkMsgNum ; if receive, bit number is correct
addq.b #8,d0 ; point to next byte for xmt
@ChkMsgNum btst.l d0,d3 ; see if this msg is non-deferrable
beq.s @RunLoop ; if not, go on to next one
jsr DequeueTrap ; remove it from the queue
move.l a0,-(sp) ; remember the address
bsr.s @RunLoop ; check the next one (using recursion)
movea.l (sp)+,a0 ; get the queue element address
clr.b IOPRequestInfo.irReqActive(a0) ; indicate that it is done
move.l IOPRequestInfo.irHandler(a0),d0 ; get the handler address
beq.s @RunRTS ; if no handler, don't try to call it
movea.l d0,a1 ; get handler address
jmp (a1) ; run the handler (may trash a0-a3/d0-d3)
@RunDone move.w d2,sr ; restore interrupt level
@RunRTS rts ; search done, now let them run
endwith
TITLE 'IOPmgr - IOP Deferred Task'
;_______________________________________________________________________
;
; Routine: IOPDefTask
; Inputs: none
; Outputs: none
; Destroys: A0, A1, D0
; Calls: IOP message Handler
; Called by: Deferred task manager
;
; Function: Calls the message handlers for the deferrable messages
; that were marked and acknowledged by the IOP interrupt
; handler.
;
;_______________________________________________________________________
CallCompHandler
move.w (sp)+,sr ; restore interrupts
movea.l d0,a0 ; setup element to dequeue
jsr DequeueTrap ; dequeue the element
clr.b IOPRequestInfo.irReqActive(a0) ; indicate that it is done
move.l IOPRequestInfo.irHandler(a0),d0 ; get the handler address
beq.s IOPDefTask ; if no handler, don't try to call it
move.l a1,-(sp) ; save queue pointer across call to handler
movea.l d0,a1 ; get handler address
jsr (a1) ; call the handler (may trash a0-a3/d0-d3)
movea.l (sp)+,a1 ; restore queue pointer
IOPDefTask ; Enters HERE ; a0-a3/d0-d3 saved by int handler
; a1 := pointer to CompleteQHdr
move.w sr,-(sp) ; save interrupt priority
ori.w #HiIntMask,sr ; disable interrupts
move.l qHead(a1),d0 ; read the head of the queue
bne.s CallCompHandler ; if not empty, dequeue and call it
assert IOPMgrGlobals.DTaskQueued=(IOPMgrGlobals.CompleteQHdr-1)
clr.b -(a1) ; indicate that the task is done
move.w (sp)+,sr ; restore interrupts
rts ; all done
if Debugging then ; <1.3>
TITLE 'IOPmgr - IOP VBL Task'
;_______________________________________________________________________
;
; Routine: IOPVblTask
; Inputs: none
; Outputs: none
; Destroys: A0, A1, A2, D0
; Calls: none
; Called by: Vertical Retrace Manager
;
; Function: Tests and clears the Alive flag on each IOP, and crashes
; if any IOP was not Alive
;
;_______________________________________________________________________
with IOPMgrGlobals,IOPInfo
IOPVblTask ; a0-a3/d0-d3 saved by int handler
movea.l IOPmgrVars,a0 ; get globals
move.w #AliveVBLrate,VTask+vblCount(a0) ; re-initialize the count
move.w sr,-(sp) ; save interrupt priority
ori.w #HiIntMask,sr ; disable interrupts
moveq.l #NumberOfIOPs-1,d0 ; loop counter
@PollLoop movea.l (a0)+,a1 ; a1 := pointer to IOPInfo
move.l a1,d1 ; test for zero
beq.s @Next ; skip if IOP doesn't exist
assert IopAddrRegPtr=0
movea.l (a1)+,a2 ; a2 := IopAddrRegPtr
assert IopDataRegPtr=(IopAddrRegPtr+4)
movea.l (a1)+,a1 ; a1 := IopDataRegPtr
move.w (a2),-(sp) ; save the IOPRamAddrReg
move.w #IOPAliveAddr,(a2) ; setup the IOP Ram Address
cmpi.b #$FF,(a1) ; IOP sets it to $FF when Idle
beq.s @Alive ; if alive and well
bsr.s IOPisDead ; crash if dead
@Alive move.w #IOPAliveAddr,(a2) ; setup the IOP Ram Address
clr.b (a1) ; we set it to $00 after testing it
move.w (sp)+,(a2) ; restore the IOPRamAddrReg
@Next dbra d0,@PollLoop ; poll the next IOP
move.w (sp)+,sr ; restore interrupt priority
rts ; return
IOPisDead move.w #dsSysErr,d0 ; Sorry, a system error occurred
_SysError ; crash
bra.s IOPisDead ; IOP failure, crash and burn
endwith
endif ; <1.3>
TITLE 'IOPmgr - Move Request Handler'
;_______________________________________________________________________
;
; Routine: MoveReqHandler
; Inputs: A0 - pointer to IOPRequestInfo
; Outputs: none
; Destroys: A0-A2/D0-D2
; Calls: IOPMsgRequest, IOPMoveData
; Called by: IOP interrupt handler
;
; Function: Handles Data Movement requests issued by drivers on the IOPs.
;
;_______________________________________________________________________
with IOPRequestInfo,IOPMoveInfo
MoveReqHandler ; a0-a3/d0-d3 saved by Interrupt Handler
; The message that the IOP sent looks very much like a IOPMoveInfo parameter
; block, the message from the IOP was read directly into the IOPMoveInfo block.
movea.l a0,a2 ; save pointer to IOPRequestInfo for later
movea.l irMessagePtr(a0),a0 ; message buffer is IOPMoveInfo request block
; The IOP number field is the only field that was not in the message from
; the IOP, so just copy it from the IOPAccessInfo, and then issue the Move.
move.b irIOPNumber(a2),imIOPNumber(a0) ; fill in the IOP number
jsr ([JIOPMoveData]) ; Perform the Move Request
; Send the result from IOPMoveData back as the reply.
; Send the Message Completed interrupt to the IOP, and return.
movea.l a2,a0 ; a0 <- IOPRequestInfo
move.b #irSendRcvReply,irRequestKind(a0)
jmp ([JIOPMsgRequest]) ; tell IOP that Message Completed and return
endwith
TITLE 'IOPmgr - Initialize IOP Manager'
;_______________________________________________________________________
;
; Routine: jsr InitIOPMgr
; Inputs: none
; Outputs: none
; Destroys: none
; Calls: none
; Called by: Start Manager
;
; Function: Initializes the IOPs, downloads their code, and starts them
; running. Allocates and initializes the IOPMgr global data
; structures.
;
;_______________________________________________________________________
with IOPMgrGlobals,IOPAccessInfo,IOPInfo
InitIOPMgr
@SavedRegs reg a0-a3/d0
movem.l @SavedRegs,-(sp) ; save registers
move.w sr,-(sp) ; save interrupt priority
ori.w #HiIntMask,sr ; disable interrupts
moveq.l #0,d0 ; amount of space for IOPInfos
TestFor SCCIOPExists ; see if we have an SCC IOP
beq.s @noSCCIOP ; if not, don't allocate space for it
addi.w #IOPInfoSize,d0 ; allocate space for it
@noSCCIOP
TestFor SWIMIOPExists ; see if we have an SWIM IOP
beq.s @noSWIMIOP ; if not, don't allocate space for it
addi.w #IOPInfoSize,d0 ; allocate space for it
@noSWIMIOP
tst.w d0 ; are there any IOPs
beq.s @noIOPs ; if not, exit
addi.w #GlobalsSize,d0 ; d0 <- data structure size
_NewPtr ,SYS,CLEAR ; allocate and clear the structure
lea -IOPMgrGlobals(a0),a2 ; Globals are negative to the pointer
move.l a2,IOPmgrVars ; initialize the Pointer
if Debugging then ; <1.3>
; Install the VBL task to look for dead IOPs
lea VTask(a2),a0 ; a0 <- VBL task
move.w #vType,qType(a0) ; initialize qType field
move.w #AliveVBLrate,vblCount(a0) ; initialize the count
lea IOPVblTask,a1 ; get the task address
move.l a1,vblAddr(a0) ; initialize vblAddr field
_VInstall ; install the VBL task
endif ; <1.3>
; Setup the deferred task manager data structure
move.w #dtQType,DTask+qType(a2) ; Initialize DTask.qType
lea IOPDefTask,a0 ; a0 <- addr of IOPDefTask
move.l a0,DTask+dtAddr(a2) ; Initialize DTask.dtAddr
lea CompleteQHdr(a2),a0 ; a0 <- completion queue header
move.l a0,DTask+dtParm(a2) ; DTask.dtParm (loaded into A1 for DTask)
; Setup the Interrupt Handler Pointer
lea vIOPInterrupt,a0 ; point to the handler
move.l a0,IntHandlerPtr(a2) ; initialize the data structure
; Install and initialize the IOPs
lea IOPInfos(a2),a2 ; point to start of IOPInfo records
TestFor SCCIOPExists ; see if we have an SCC IOP
beq.s @SCCIOPdone ; if not, don't install it
moveq.l #(iaInstallIOP<<8)|\
SccIopNum,d0 ; get the IOP number and access kind
movea.l SCCrd,a1 ; get the base address
lea SccDecode,a3 ; get the bypass interrupt handler address
bsr.s @InstallIOP ; install the SCC IOP
@SCCIOPdone
TestFor SWIMIOPExists ; see if we have an SWIM IOP
beq.s @SWIMIOPdone ; if not, don't install it
moveq.l #(iaInstallIOP<<8)|\
SwimIopNum,d0 ; get the IOP number and access kind
movea.l IWM,a1 ; get the base address
suba.l a3,a3 ; no bypass interrupt handler
bsr.s @InstallIOP ; install the SWIM IOP
@SWIMIOPdone
@Done move.w (sp)+,sr ; restore interrupts
movem.l (sp)+,@SavedRegs ; restore registers
rts ; all done
@noIOPs lea @traps,a1 ; point to the list
move.w (a1)+,d0 ; get the _Unimplemented trap
_GetTrapAddress ,newTool ; get address of unimplemented trap
@trapLoop move.w (a1)+,d0 ; get next trap to un-implement
beq.s @Done ; traps disabled, exit
_SetTrapAddress ,newOS ; un-implement the trap
bra.s @trapLoop ; loop through the table
@traps _Unimplemented
_IOPInfoAccess
_IOPMsgRequest
_IOPMoveData
dc.w 0 ; end of list
@InstallIOP movea.l a2,a0 ; a0 <- IOPInfoRecord
assert iaIOPInfoPtr=(iaAccessInfoSize-4)
move.l a0,-(sp) ; setup IOP info pointer
clr.w -(sp) ; clear reserved field
assert iaIOPNumber=(iaIOPInfoPtr-3)
assert iaAccessKind=(iaIOPInfoPtr-4)
move.w d0,-(sp) ; setup the IOP number and access kind
assert IopAddrRegPtr=0
lea iopRamAddr(a1),a1 ; point to the address register
move.l a1,(a0)+ ; setup IopAddrRegPtr
assert IopDataRegPtr=(IopAddrRegPtr+4)
addq.w #iopRamData-iopRamAddr,a1 ; point to the data register
move.l a1,(a0)+ ; setup IopDataRegPtr
assert IopCtlRegPtr=(IopDataRegPtr+4)
subq.w #iopRamData-iopStatCtl,a1 ; point to the status/control register
move.l a1,(a0)+ ; setup IopCtlRegPtr
assert BypassHandler=(IopCtlRegPtr+4)
move.l a3,(a0)+ ; setup BypassHandler
movea.l sp,a0 ; a0 <- IOPAccessInfo record
_IOPInfoAccess ; install the IOP
addq.l #iaAccessInfoSize,sp ; de-allocate the IOPAccessInfo record
adda.w #IOPInfoSize,a2 ; point to next IOPInfo record
rts ; go on to the next IOP
endwith
TITLE 'IOPmgr - Set SCC IOP ByPass mode'
;_______________________________________________________________________
;
; Routine: jsr SCCIOPByPass <1.2>
; Inputs: none
; Outputs: none
; Destroys: none
; Calls: none
; Called by: InitIO
;
; Function: Checks to see if the SCC IOP should be placed in bypass
; and set it accordingly.
;
;_______________________________________________________________________
with IOPMgrGlobals,IOPAccessInfo,IOPInfo,IOPRequestInfo
SCCIOPByPass
;
; Check PRAM to see if we should put the SCC IOP into enhanced communications mode.
;
; Bit 0 = 1 -> leave in bypass <2>
; = 0 -> put in enhanced communications mode <2>
;
@SavedRegs reg a0-a2/d0
movem.l @SavedRegs,-(sp) ; save registers
move.l #((01<<16)|IOPPRAM), d0 ; index and number of bytes to get
clr.b -(sp) ; make room for data
movea.l sp, a0 ; a0 points to data buffer
_ReadXPRAM
MOVE.B (SP),SCCIOPFlag ; save the PRAM byte in low mem <1.9>
moveq.l #$01,d0 ; check the bypass bit
and.b (sp)+, d0 ; get the PRAM value
bne.s @Done ; branch if SET, stay in bypass mode <2.0>
clr.l -(sp) ; reply buffer
clr.l -(sp) ; [long] -> Completion Routine Address (Nil)
pea 4(sp) ; [long] -> Reply Buffer Address
pea @ByPassMsg ; [long] -> Message Buffer Address
move.l #((Active<<0)+\ ; [byte] -> Request active
(ReplyLen<<8)+\ ; [byte] -> Reply Length
(MsgLen<<16)+\ ; [byte] -> Message Length
(KernMsg<<24)), -(sp) ; [byte] -> Message Number
move.l #((irSendXmtMessage<<0)+\ ; [byte] -> kind of request to perform
(SccIopNum<<8)), -(sp) ; [byte] -> IOP Number for SCC
; [word] -> queue type
clr.l -(sp) ; [long] -> link to next queue element
movea.l sp, a0
_IOPMsgRequest
bne.s @FlagBypass ; if send failed, don't wait <1.5><2>
@Sync_Loop tst.b irReqActive(sp) ; make this a sync call
bne.s @Sync_Loop
@waitDone adda.w #(irReqInfoSize+4), sp ; adjust stack <1.5>
@Done movem.l (sp)+,@SavedRegs ; restore registers
rts
@FlagBypass BSET #0,SCCIOPFlag ;set bit 0=1 to flag bypass mode <2>
BRA.S @waitDone ; <2>
@ByPassMsg DC.B ByPassCmd, 0, $ff ; Turn bypass on or off
align 2
endwith
TITLE 'IOPmgr - Initialize SCC IOP Hardware'
;_______________________________________________________________________ <1.4>
;
; Routine: jsr SCCIOPHwInit
; Inputs: none
; Outputs: none
; Destroys: A0, A1, D0
; Calls: none
; Called by: Start Manager
;
; Function: Initializes the SCC IOP, so that the SCC can be used in ByPass
; mode and has the correct timing to that when TimeSCCDB is
; computed it will be correct.
;
;_______________________________________________________________________
SCCIOPHwInit
movea.l SCCRd,a1 ; a1 <- IOP Base
move.b #resetIopRun,iopStatCtl(a1) ; init the Status/Ctl reg, hold IOP reset
; Download the IOP code
lea SCCIOPInitCode,a0 ; a0 <- start of IOP code (in this ROM)
move.w (a0)+,d0 ; get the size code (-1 for DBRA)
move.w (a0)+,iopRamAddr(a1); setup the code load address
@LoadLoop move.b (a0)+,iopRamData(a1); download a byte
dbra d0,@LoadLoop ; load all of the bytes
; Start IOP execution
move.b #setIopRun,iopStatCtl(a1) ; release IOP reset (let it rip!)
lsr.w #6,d0 ; $FFFF -> $03FF -> loop 1024 times
@wait dbra d0,@wait ; delay a bit while IOP initializes
rts ; all done
; 6502 code to throw SCC IOP into bypass mode
SCCIOPInitCode
dc.w (@end-@Start)-1 ; size of the code (in bytes), -1 for DBRA
dc.w $8000-(@end-@Start) ; (word) load address
@start ; code starts here
dc.b $A9,$81 ; 7FEE: lda #1*DEBUG+0*SCCISM+1*BYPASS
dc.b $8D,$30,$F0 ; 7FF0: sta SCCControlReg
dc.b $A9,$23 ; 7FF3: lda #SccIOCtlReg <2>
dc.b $8D,$31,$F0 ; 7FF5: sta IOControlReg
dc.b $80,$FE ; 7FF8: bra $7FF8
dc.b $EE,$7F ; 7FFA 7FEE Non-Maskable Interrupt vector
dc.b $EE,$7F ; 7FFC 7FEE Processor reset vector
dc.b $EE,$7F ; 7FFE 7FEE Interrupt Request vector
@end ; code ends here
if PadForOverpatch then ; <1.6>
align 4 ; <1.5>
string asis ; <1.5>
dcb.l ($770-(*-IOPmgr))/4,'Gary' ; padding for overpatch <1.5>
endif ; <1.6>
endproc
END